Nortel-Magellan-Passport-AtmIispMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-Magellan-Passport-AtmIispMIB.
221
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
221 total| Object Name |
|---|
atmIispMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.70 |
IMPORTS Unknown .1.3.6.1.4.1.562.2.4.2.70 |
atmIispGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.70.1 |
atmIispGroupBE OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.70.1.5 |
atmIispGroupBE00 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.70.1.5.1 |
atmIispGroupBE00A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.70.1.5.1.2 |
atmIispCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.70.3 |
atmIispCapabilitiesBE OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.70.3.5 |
atmIispCapabilitiesBE00 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.70.3.5.1 |
atmIispCapabilitiesBE00A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.70.3.5.1.2 |
atmIfIisp OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.7 |
atmIfIispRowStatusTableThis entry controls the addition and deletion of
atmIfIisp components. SEQUENCE OF AtmIfIispRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.7.1 |
atmIfIispRowStatusEntryA single entry in the table represents a single
atmIfIisp component. AtmIfIispRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.7.1.1 |
atmIfIispRowStatusThis variable is used as the basis for SNMP naming of
atmIfIisp components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.7.1.1.1 |
atmIfIispComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.7.1.1.2 |
atmIfIispStorageTypeThis variable represents the storage type value for the
atmIfIisp tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.7.1.1.4 |
atmIfIispIndexThis variable represents the index for the atmIfIisp tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.7.1.1.10 |
atmIfIispSig OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.7.3 |
atmIfIispSigRowStatusTableThis entry controls the addition and deletion of
atmIfIispSig components. SEQUENCE OF AtmIfIispSigRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.7.3.1 |
atmIfIispSigRowStatusEntryA single entry in the table represents a single
atmIfIispSig component. AtmIfIispSigRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.7.3.1.1 |
atmIfIispSigRowStatusThis variable is used as the basis for SNMP naming of
atmIfIispSig components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.7.3.1.1.1 |
atmIfIispSigComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.7.3.1.1.2 |
atmIfIispSigStorageTypeThis variable represents the storage type value for the
atmIfIispSig tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.7.3.1.1.4 |
atmIfIispSigIndexThis variable represents the index for the atmIfIispSig tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.7.3.1.1.10 |
atmIfIispSigVcd OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.7.3.2 |
atmIfIispSigVcdRowStatusTableThis entry controls the addition and deletion of
atmIfIispSigVcd components. SEQUENCE OF AtmIfIispSigVcdRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.7.3.2.1 |
atmIfIispSigVcdRowStatusEntryA single entry in the table represents a single
atmIfIispSigVcd component. AtmIfIispSigVcdRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.7.3.2.1.1 |
atmIfIispSigVcdRowStatusThis variable is used as the basis for SNMP naming of
atmIfIispSigVcd components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.7.3.2.1.1.1 |
atmIfIispSigVcdComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.7.3.2.1.1.2 |
atmIfIispSigVcdStorageTypeThis variable represents the storage type value for the
atmIfIispSigVcd tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.7.3.2.1.1.4 |
atmIfIispSigVcdIndexThis variable represents the index for the atmIfIispSigVcd tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.7.3.2.1.1.10 |
atmIfIispSigVcdProvTableThis group contains the provisionable traffic attributes for a control
channel. SEQUENCE OF AtmIfIispSigVcdProvEntry .1.3.6.1.4.1.3764.1.1.30.114.7.3.2.10 |
atmIfIispSigVcdProvEntryAn entry in the atmIfIispSigVcdProvTable. AtmIfIispSigVcdProvEntry .1.3.6.1.4.1.3764.1.1.30.114.7.3.2.10.1 |
atmIfIispSigVcdTrafficDescTypeThis attribute specifies the type of traffic management which is
applied to both the transmit and receive direction of this connection
as defined in the ATM Forum. The trafficDescType determines the
number and meaning of the parameters in the trafficDescParm
attribute.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.7.3.2.10.1.1 |
atmIfIispSigVcdAtmServiceCategoryThis attribute specifies the ATM service category for both directions
of the connection.
The constantBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. The consistent availability of a fixed quantity of
bandwidth is considered appropriate for CBR service. Cells which
are delayed beyond the value specified by CellTransfer Delay are
assumed to be of significantly reduce value to the application.
The rtVariableBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. Sources are expected to transmit at a rate which varies
with time. Equivalently, the source can be described as 'bursty'.
Cells which are delayed beyond the value specified by CTD are
assumed to be of significantly reduced value to the application. Real
time VBR service may support statistical multiplexing of real time
sources.
The nrtVariableBitRate service category is intended for non-real
time applications which have bursty traffic characteristics and which
can be characterized in terms of a PCR, SCR, and MBS. For those
cells which are transferred within the traffic contract, the application
expects a low cell loss ratio. For all connections, it expects a bound
on the mean cell transfer delay. Non-real time VBR service may
support statistical multiplexing of connections.
The unspecifiedBitRate service is intended for non-real time
applications; that is, those not requiring tightly constrained delay
and delay variation. UBR sources are expected to be bursty. UBR
service supports a high degree of statistical multiplexing among
sources. UBR service does not specify traffic related service
guarantees. No numerical commitments are made with respect to
the cell loss ratio experienced by a UBR connection, or as to the
cell transfer delay experienced by cells on the connection.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.7.3.2.10.1.3 |
atmIfIispSigVcdQosClassThis attribute specifies the quality of service for both the forward
and backward direction for this connection.
Class 1 supports a QOS that meets Service Class A performance
requirements (Circuit emulation, constant bit rate video).
Class 2 supports a QOS that meets Service Class B performance
requirements (Variable bit rate audio and video).
Class 3 supports a QOS that meets Service Class C performance
requirements (Connection-Oriented Data Transfer).
Class 4 supports a QOS that meets Service Class D performance
requirements (Connectionless Data Transfer).
Class 0 is the unspecified bit rate QOS class; no objective is
specified for the performance parameters.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.7.3.2.10.1.21 |
atmIfIispSigVcdTrafficShapingThis attribute specifies whether this connection uses traffic shaping
when transmitting traffic to the ATM interface.
When sameAsCa is selected, traffic shaping for this connection is
based on the trafficShaping attribute of the connection's service
category component under the AtmIf CA. If the service category has
traffic shaping enabled, then traffic shaping is enabled for the
connection. Note that enabling traffic shaping may have no effect
under certain cases. These cases are listed in the description of the
trafficShaping operational attribute, which is under the Vcc Tm and
Vpc Tm components.
When disabled is selected, traffic shaping for this connection is
disabled.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.7.3.2.10.1.50 |
atmIfIispSigVcdUnshapedTransmitQueueingThis attribute only applies when this connection is unshaped. This
attribute specifies the transmit queueing method for this connection
if it is unshaped. Refer to the unshapedTransmitQueueing attribute
under the AtmIf CA service category subcomponent for more details
on the meaning of this attribute.
When this attribute is set to sameAsCa, the transmit queueing
method for the connection is based on the
unshapedTransmitQueueing attribute of the connection's service
category component under the ConnectionAdministrator.
When this attribute is set to common, transmit traffic on this
unshaped connection is destined for the common queue.
The value sameAsInterface is for migration from previous software
releases, but should no longer be usedrw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.7.3.2.10.1.60 |
atmIfIispSigVcdUsageParameterControlThis attribute specifies whether this connection enforces usage
parameter control when receiving traffic from the ATM interface.
When sameAsCa is selected, UPC for the connection is based on
the usageParameterControl attribute of the connection's service
category component under the ConnectionAdministrator. If the
service category has UPC enabled, then UPC is enabled for the
connection. Note that enabling UPC may have no effect under
certain cases. These cases are listed in the description of the
usageParameterControl operational attribute, which is under the
Vcc Tm or Vpc Tm component.
When disabled is selected, UPC for this connection is disabled.
The value sameAsInterface is for migration from previous software
releases, but should no longer be usedrw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.7.3.2.10.1.70 |
atmIfIispSigVcdTdpTableThis attribute is a vector of five traffic parameters whose meanings
are defined by the trafficDescType attribute. The values of peak cell
rate (PCR), sustained cell rate (SCR) and requested shaping rate are
expressed in cell/s. Maximum burst size (MBS) is expressed in
cells. CDVT is expressed in microseconds. The values of PCR,
SCR, MBS and CDVT are used for connection admission control
(CAC). The value of CDVT is only used for connections where the
atmServiceCategory is constantBitRate. For all other values of
atmServiceCategory, CDVT is ignored. The values of PCR, SCR
and requested shaping rate are used to determine the actual shaping
rate where traffic shaping is enabled.
When trafficDescType is 3, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3
must be zero.
When trafficDescType is 6, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 7, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 with cell discard; parameter 3 represents the MBS for
CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 8, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 traffic with cell tagging; parameter 3 represents the MBS
for CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
Whenever it is valid for PCR to be specified, parameter 5 may also
be used to specify a requested shaping rate. A non-zero value in
parameter 5 overrides the value in parameter 1 and is used as the
peak cell rate in calculations of CAC and shaping rate.
For trafficDescType 3 the traffic is shaped at the next rate less than
the PCR.
For trafficDescType 6, 7, and 8, the traffic is shaped at the highest
available rate which is between PCR and SCR. However, if there is
no available shaping rate between PCR and SCR, traffic is shaped at
the next rate above the PCR. SEQUENCE OF AtmIfIispSigVcdTdpEntry .1.3.6.1.4.1.3764.1.1.30.114.7.3.2.387 |
atmIfIispSigVcdTdpEntryAn entry in the atmIfIispSigVcdTdpTable. AtmIfIispSigVcdTdpEntry .1.3.6.1.4.1.3764.1.1.30.114.7.3.2.387.1 |
atmIfIispSigVcdTdpIndexThis variable represents the atmIfIispSigVcdTdpTable
specific index for the atmIfIispSigVcdTdpTable. Integer32 .1.3.6.1.4.1.3764.1.1.30.114.7.3.2.387.1.1 |
atmIfIispSigVcdTdpValueThis variable represents an individual value for the
atmIfIispSigVcdTdpTable.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.7.3.2.387.1.2 |
atmIfIispSigProvTableThis attribute group contains the provisionable attributes for the
Signalling component. SEQUENCE OF AtmIfIispSigProvEntry .1.3.6.1.4.1.3764.1.1.30.114.7.3.10 |
atmIfIispSigProvEntryAn entry in the atmIfIispSigProvTable. AtmIfIispSigProvEntry .1.3.6.1.4.1.3764.1.1.30.114.7.3.10.1 |
atmIfIispSigVciThis attribute specifies the signalling channel number.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.7.3.10.1.1 |
atmIfIispSigAddressConversionThis attribute specifies the address conversion on the outgoing
signalling PDUs. The options are none, nativeE164, or nsap. The
none option is the default and if this option is chosen then nothing
is done to the address information element (IE) in the outgoing
signalling message. If nativeE164 option is chosen, then only
NSAP encapsulated E.164 addresses with zeros in the ESI are
converted to native E.164 format in the outgoing signalling
message. If the NSAP address is not encapsulated E.164 or the ESI
field is not zeros and the nativeE164 option is chosen, then the call
is cleared. If the nsap option is chosen, then native E.164 addresses
are converted to NSAP E.164 with zeros in the ESI field; otherwise
the address is in NSAP format and is not changed.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.7.3.10.1.2 |
atmIfIispSigStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF AtmIfIispSigStateEntry .1.3.6.1.4.1.3764.1.1.30.114.7.3.11 |
atmIfIispSigStateEntryAn entry in the atmIfIispSigStateTable. AtmIfIispSigStateEntry .1.3.6.1.4.1.3764.1.1.30.114.7.3.11.1 |
atmIfIispSigAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.7.3.11.1.1 |
atmIfIispSigOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.7.3.11.1.2 |
atmIfIispSigUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.7.3.11.1.3 |
atmIfIispSigOperTableThis attribute contains the operational attributes for the
AtmSignalling component. SEQUENCE OF AtmIfIispSigOperEntry .1.3.6.1.4.1.3764.1.1.30.114.7.3.12 |
atmIfIispSigOperEntryAn entry in the atmIfIispSigOperTable. AtmIfIispSigOperEntry .1.3.6.1.4.1.3764.1.1.30.114.7.3.12.1 |
atmIfIispSigLastTxCauseCodeThis attribute indicates the cause code in the last transmitted
signalling message that contains the CAUSE information element.
The cause code is used to describe the reason for generating certain
signalling messages.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.7.3.12.1.1 |
atmIfIispSigLastTxDiagCodeThis attribute contains the diagnostic code in the last transmitted
signalling message. The diagnostic code is contained in the CAUSE
information element and identifies an information element type or
timer type. The diagnostic code is present only if a procedural error
is detected by the signalling protocol. A diagnostic code is always
accompanied by the cause code. If there is no failure, this attribute
is set to 0.ro Hex .1.3.6.1.4.1.3764.1.1.30.114.7.3.12.1.2 |
atmIfIispSigLastRxCauseCodeThis attribute contains the cause code in the last received signalling
message that contains the CAUSE information element. The cause
code is used to describe the reason for generating certain signalling
messages.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.7.3.12.1.3 |
atmIfIispSigLastRxDiagCodeThis attribute contains the diagnostic code in the last received
signalling message. The diagnostic code is contained in the CAUSE
information element and identifies an information element type or
timer type. The diagnostic code is present only if a procedural error
is detected by the signalling protocol. A diagnostic code is always
accompanied by the cause code. If there is no failure, this attribute
is set to 0.ro Hex .1.3.6.1.4.1.3764.1.1.30.114.7.3.12.1.4 |
atmIfIispSigStatsTableThis attribute group contains the statistics associated with the
AtmSignalling component. SEQUENCE OF AtmIfIispSigStatsEntry .1.3.6.1.4.1.3764.1.1.30.114.7.3.13 |
atmIfIispSigStatsEntryAn entry in the atmIfIispSigStatsTable. AtmIfIispSigStatsEntry .1.3.6.1.4.1.3764.1.1.30.114.7.3.13.1 |
atmIfIispSigCurrentConnectionsThis attribute indicates the total number of currently active
connections.roobsolete Counter32 .1.3.6.1.4.1.3764.1.1.30.114.7.3.13.1.1 |
atmIfIispSigPeakConnectionsThis attribute indicates the high water mark of active point-to-
point and point-to-multipoint connections.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.114.7.3.13.1.2 |
atmIfIispSigSuccessfulConnectionsThis attribute counts the total number of switched point-to-
point and point-to-multipoint connections that were successfully
established. The counter wraps to 0 when the maximum value is
exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.7.3.13.1.3 |
atmIfIispSigFailedConnectionsThis attribute counts the total number of switched connections that
were not successfully established.The counter wraps to 0 when the
maximum value is exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.7.3.13.1.4 |
atmIfIispSigTxPdusThis attribute counts the number of transmitted signalling
PDUs.The counter wraps to 0 when the maximum value is
exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.7.3.13.1.5 |
atmIfIispSigRxPdusThis attribute counts the number of received signalling PDUs.The
counter wraps to 0 when the maximum value is exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.7.3.13.1.6 |
atmIfIispSigCurrentPmpConnectionsThis attribute indicates the number of currently active point-to-
multipoint connections.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.114.7.3.13.1.7 |
atmIfIispSigPeakPmpConnectionsThis attribute indicates the high water mark of active point-to-
multipoint connections.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.114.7.3.13.1.8 |
atmIfIispSigSuccessfulPmpConnectionsThis attribute counts the total number of switched point-to-
multipoint connections that were successfully established.
The counter wraps to 0 when the maximum value is
exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.7.3.13.1.9 |
atmIfIispSigFailedPmpConnectionsThis attribute counts the number of switched point-to-
multipoint connections that were not successfully
established.The counter wraps to 0 when the maximum value
is exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.7.3.13.1.10 |
atmIfIispSigNewCurrentConnectionsThis attribute indicates the total number of currently active point-to-
point and point-to-multipoint connections.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.114.7.3.13.1.11 |
atmIfIispAddr OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.7.4 |
atmIfIispAddrRowStatusTableThis entry controls the addition and deletion of
atmIfIispAddr components. SEQUENCE OF AtmIfIispAddrRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.7.4.1 |
atmIfIispAddrRowStatusEntryA single entry in the table represents a single
atmIfIispAddr component. AtmIfIispAddrRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.7.4.1.1 |
atmIfIispAddrRowStatusThis variable is used as the basis for SNMP naming of
atmIfIispAddr components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.7.4.1.1.1 |
atmIfIispAddrComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.7.4.1.1.2 |
atmIfIispAddrStorageTypeThis variable represents the storage type value for the
atmIfIispAddr tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.7.4.1.1.4 |
atmIfIispAddrAddressIndexThis variable represents an index for the atmIfIispAddr tables. AsciiStringIndex .1.3.6.1.4.1.3764.1.1.30.114.7.4.1.1.10 |
atmIfIispAddrAddressTypeIndexThis variable represents an index for the atmIfIispAddr tables. Enumeration .1.3.6.1.4.1.3764.1.1.30.114.7.4.1.1.11 |
atmIfIispAddrTermSP OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.7.4.2 |
atmIfIispAddrTermSPRowStatusTableThis entry controls the addition and deletion of
atmIfIispAddrTermSP components. SEQUENCE OF AtmIfIispAddrTermSPRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.7.4.2.1 |
atmIfIispAddrTermSPRowStatusEntryA single entry in the table represents a single
atmIfIispAddrTermSP component. AtmIfIispAddrTermSPRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.7.4.2.1.1 |
atmIfIispAddrTermSPRowStatusThis variable is used as the basis for SNMP naming of
atmIfIispAddrTermSP components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.7.4.2.1.1.1 |
atmIfIispAddrTermSPComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.7.4.2.1.1.2 |
atmIfIispAddrTermSPStorageTypeThis variable represents the storage type value for the
atmIfIispAddrTermSP tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.7.4.2.1.1.4 |
atmIfIispAddrTermSPIndexThis variable represents the index for the atmIfIispAddrTermSP tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.7.4.2.1.1.10 |
atmIfIispAddrPnniInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.7.4.3 |
atmIfIispAddrPnniInfoRowStatusTableThis entry controls the addition and deletion of
atmIfIispAddrPnniInfo components. SEQUENCE OF AtmIfIispAddrPnniInfoRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.7.4.3.1 |
atmIfIispAddrPnniInfoRowStatusEntryA single entry in the table represents a single
atmIfIispAddrPnniInfo component. AtmIfIispAddrPnniInfoRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.7.4.3.1.1 |
atmIfIispAddrPnniInfoRowStatusThis variable is used as the basis for SNMP naming of
atmIfIispAddrPnniInfo components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.7.4.3.1.1.1 |
atmIfIispAddrPnniInfoComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.7.4.3.1.1.2 |
atmIfIispAddrPnniInfoStorageTypeThis variable represents the storage type value for the
atmIfIispAddrPnniInfo tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.7.4.3.1.1.4 |
atmIfIispAddrPnniInfoIndexThis variable represents the index for the atmIfIispAddrPnniInfo tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.7.4.3.1.1.10 |
atmIfIispAddrPnniInfoProvTableThis attribute group contains the provisioned attributes relating to
PNNI for a PnniInfo component. SEQUENCE OF AtmIfIispAddrPnniInfoProvEntry .1.3.6.1.4.1.3764.1.1.30.114.7.4.3.10 |
atmIfIispAddrPnniInfoProvEntryAn entry in the atmIfIispAddrPnniInfoProvTable. AtmIfIispAddrPnniInfoProvEntry .1.3.6.1.4.1.3764.1.1.30.114.7.4.3.10.1 |
atmIfIispAddrPnniInfoScopeThis attribute specifies the scope of the ATM address, which is the
highest level up to which this address will be advertised in the
PNNI hierarchy. The scope must be set to a value numerically less
than or equal to the level of the lowest level peer group containing
this node. Setting the scope to 0 will cause the address to be
advertised globally within this PNNI routing domain.rw INTEGER (-1..104) .1.3.6.1.4.1.3764.1.1.30.114.7.4.3.10.1.1 |
atmIfIispAddrPnniInfoReachabilityThis attribute indicates whether the address is internal or exterior.
An internal reachable address is an address of a destination that is
directly attached to the logical node advertising the address. An
exterior reachable address is an address that can be reached
through a PNNI routing domain, but which is not located in that
PNNI routing domain.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.7.4.3.10.1.2 |
atmIfIispAddrOperTableThis attribute group contains the operational attributes for the
Address component. SEQUENCE OF AtmIfIispAddrOperEntry .1.3.6.1.4.1.3764.1.1.30.114.7.4.10 |
atmIfIispAddrOperEntryAn entry in the atmIfIispAddrOperTable. AtmIfIispAddrOperEntry .1.3.6.1.4.1.3764.1.1.30.114.7.4.10.1 |
atmIfIispAddrScopeThis attribute indicates the scope of the ATM address, which is the
highest level to which this address will be advertised in the PNNI
hierarchy. If no PnniInfo subcomponent has been provisioned, then
the scope will default to the level of this node in the PNNI
hierarchy. If this node does not participate in a PNNI hierarchy, then
this attribute will have the value of -1.ro INTEGER (-1..104) .1.3.6.1.4.1.3764.1.1.30.114.7.4.10.1.1 |
atmIfIispAddrReachabilityThis attribute indicates whether the address is internal or exterior.
An internal reachable address is an address of a destination that is
directly attached to the logical node advertising the address. An
exterior reachable address is an address that can be reached
through a PNNI routing domain, but which is not located in that
PNNI routing domain.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.7.4.10.1.2 |
atmIfIispProvTableThis group contains the provisionable attributes for the Iisp
component. SEQUENCE OF AtmIfIispProvEntry .1.3.6.1.4.1.3764.1.1.30.114.7.10 |
atmIfIispProvEntryAn entry in the atmIfIispProvTable. AtmIfIispProvEntry .1.3.6.1.4.1.3764.1.1.30.114.7.10.1 |
atmIfIispVersionThis attribute indicates which specification the IISP interface
complies with. The options are iisp10Sig30 which refers to IISP
version 1.0 with 3.0 signalling and iisp10Sig31 which refers to IISP
version 1.0 with 3.1 signalling. If this attribute is changed, all
switched Vcc components in this interface are cleared due to the
fact that the two versions are incompatible.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.7.10.1.1 |
atmIfIispSideThis attribute indicates which side the interface is, user or network.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.7.10.1.2 |
atmIfIispSoftPvcRetryPeriodThis attribute specifies the time to wait between call set up retries.
The resolution is to the nearest 10 seconds.
This attribute has been obsoleted and is replaced by the
softPvpAndPvcRetryPeriod attribute.rwobsolete Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.7.10.1.3 |
atmIfIispSoftPvpAndPvcRetryPeriodThis attribute specifies the time to wait between soft PVP or soft
PVC call setup retries. The resolution is to the nearest 10 seconds.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.7.10.1.4 |
atmIfIispSoftPvpAndPvcHoldOffTimeThis attribute specifies how long to hold off retries following a
release or the connection. The resolution is to the nearest 50 ms.rw Unsigned32 (0 | 50..20000) .1.3.6.1.4.1.3764.1.1.30.114.7.10.1.5 |
atmIfIispAcctOptTableThis group contains the provisionable attributes for accounting. SEQUENCE OF AtmIfIispAcctOptEntry .1.3.6.1.4.1.3764.1.1.30.114.7.11 |
atmIfIispAcctOptEntryAn entry in the atmIfIispAcctOptTable. AtmIfIispAcctOptEntry .1.3.6.1.4.1.3764.1.1.30.114.7.11.1 |
atmIfIispAccountCollectionThis attribute is used to turn accounting on or off for SVC and
SPVC connections. It also specifies the reason(s) for which
accounting data is collected: billing, test, study, audit, or force.
If the set of reasons is not empty then accounting records will be
generated by this interface in the following situations:
- on a TODA changeover if TODA is enabled;
- every 12 hours (per connection) if TODA is disabled;
- on every call clear (a call record with final cell counts).
If none of the reasons is present, then accounting will be
suppressed.
The reason for collection is recorded in the accounting record, in
the attribute callingCollectReason or calledCollectReason as
appropriate.
Description of bits:
bill(0)
test(1)
study(2)
audit(3)
force(4)rw OCTET STRING .1.3.6.1.4.1.3764.1.1.30.114.7.11.1.1 |
atmIfIispAccountConnectionTypeThis attribute specifies whether accounting records generated by
this interface should be marked as originating, terminating or
intermediate. This attribute, in combination with the direction of the
call, determines the value of attribute connPointType of the
accounting record and may be used by downstream accounting
processes to correlate the records.
If the value is origTerm then records generated for incoming calls
will be marked as originating and records generated for outgoing
calls will be marked as terminating.
If the value is intermediate then records generated for all calls will
be marked as intermediate.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.7.11.1.2 |
atmIfIispAccountClassThis attribute specifies the accounting class associated with the
interface. Its meaning is determined by the network operator.
Its value is simply recorded in the accounting records generated by
this interface, in the attribute callingServiceType or
calledServiceType as appropriate.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.7.11.1.3 |
atmIfIispServiceExchangeThis attribute specifies the data service exchange associated with
this interface. Its meaning is determined by the network operator.
Its value is simply recorded in the accounting records generated by
this interface, in the attribute callingDse or calledDse as
appropriate.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.7.11.1.4 |
atmIfVptIisp OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.9.6 |
atmIfVptIispRowStatusTableThis entry controls the addition and deletion of
atmIfVptIisp components. SEQUENCE OF AtmIfVptIispRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.1 |
atmIfVptIispRowStatusEntryA single entry in the table represents a single
atmIfVptIisp component. AtmIfVptIispRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.1.1 |
atmIfVptIispRowStatusThis variable is used as the basis for SNMP naming of
atmIfVptIisp components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.6.1.1.1 |
atmIfVptIispComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.6.1.1.2 |
atmIfVptIispStorageTypeThis variable represents the storage type value for the
atmIfVptIisp tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.6.1.1.4 |
atmIfVptIispIndexThis variable represents the index for the atmIfVptIisp tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.9.6.1.1.10 |
atmIfVptIispSig OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.9.6.3 |
atmIfVptIispSigRowStatusTableThis entry controls the addition and deletion of
atmIfVptIispSig components. SEQUENCE OF AtmIfVptIispSigRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.1 |
atmIfVptIispSigRowStatusEntryA single entry in the table represents a single
atmIfVptIispSig component. AtmIfVptIispSigRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.1.1 |
atmIfVptIispSigRowStatusThis variable is used as the basis for SNMP naming of
atmIfVptIispSig components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.1.1.1 |
atmIfVptIispSigComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.1.1.2 |
atmIfVptIispSigStorageTypeThis variable represents the storage type value for the
atmIfVptIispSig tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.1.1.4 |
atmIfVptIispSigIndexThis variable represents the index for the atmIfVptIispSig tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.1.1.10 |
atmIfVptIispSigVcd OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.2 |
atmIfVptIispSigVcdRowStatusTableThis entry controls the addition and deletion of
atmIfVptIispSigVcd components. SEQUENCE OF AtmIfVptIispSigVcdRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.2.1 |
atmIfVptIispSigVcdRowStatusEntryA single entry in the table represents a single
atmIfVptIispSigVcd component. AtmIfVptIispSigVcdRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.2.1.1 |
atmIfVptIispSigVcdRowStatusThis variable is used as the basis for SNMP naming of
atmIfVptIispSigVcd components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.2.1.1.1 |
atmIfVptIispSigVcdComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.2.1.1.2 |
atmIfVptIispSigVcdStorageTypeThis variable represents the storage type value for the
atmIfVptIispSigVcd tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.2.1.1.4 |
atmIfVptIispSigVcdIndexThis variable represents the index for the atmIfVptIispSigVcd tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.2.1.1.10 |
atmIfVptIispSigVcdProvTableThis group contains the provisionable traffic attributes for a control
channel. SEQUENCE OF AtmIfVptIispSigVcdProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.2.10 |
atmIfVptIispSigVcdProvEntryAn entry in the atmIfVptIispSigVcdProvTable. AtmIfVptIispSigVcdProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.2.10.1 |
atmIfVptIispSigVcdTrafficDescTypeThis attribute specifies the type of traffic management which is
applied to both the transmit and receive direction of this connection
as defined in the ATM Forum. The trafficDescType determines the
number and meaning of the parameters in the trafficDescParm
attribute.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.2.10.1.1 |
atmIfVptIispSigVcdAtmServiceCategoryThis attribute specifies the ATM service category for both directions
of the connection.
The constantBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. The consistent availability of a fixed quantity of
bandwidth is considered appropriate for CBR service. Cells which
are delayed beyond the value specified by CellTransfer Delay are
assumed to be of significantly reduce value to the application.
The rtVariableBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. Sources are expected to transmit at a rate which varies
with time. Equivalently, the source can be described as 'bursty'.
Cells which are delayed beyond the value specified by CTD are
assumed to be of significantly reduced value to the application. Real
time VBR service may support statistical multiplexing of real time
sources.
The nrtVariableBitRate service category is intended for non-real
time applications which have bursty traffic characteristics and which
can be characterized in terms of a PCR, SCR, and MBS. For those
cells which are transferred within the traffic contract, the application
expects a low cell loss ratio. For all connections, it expects a bound
on the mean cell transfer delay. Non-real time VBR service may
support statistical multiplexing of connections.
The unspecifiedBitRate service is intended for non-real time
applications; that is, those not requiring tightly constrained delay
and delay variation. UBR sources are expected to be bursty. UBR
service supports a high degree of statistical multiplexing among
sources. UBR service does not specify traffic related service
guarantees. No numerical commitments are made with respect to
the cell loss ratio experienced by a UBR connection, or as to the
cell transfer delay experienced by cells on the connection.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.2.10.1.3 |
atmIfVptIispSigVcdQosClassThis attribute specifies the quality of service for both the forward
and backward direction for this connection.
Class 1 supports a QOS that meets Service Class A performance
requirements (Circuit emulation, constant bit rate video).
Class 2 supports a QOS that meets Service Class B performance
requirements (Variable bit rate audio and video).
Class 3 supports a QOS that meets Service Class C performance
requirements (Connection-Oriented Data Transfer).
Class 4 supports a QOS that meets Service Class D performance
requirements (Connectionless Data Transfer).
Class 0 is the unspecified bit rate QOS class; no objective is
specified for the performance parameters.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.2.10.1.21 |
atmIfVptIispSigVcdTrafficShapingThis attribute specifies whether this connection uses traffic shaping
when transmitting traffic to the ATM interface.
When sameAsCa is selected, traffic shaping for this connection is
based on the trafficShaping attribute of the connection's service
category component under the AtmIf CA. If the service category has
traffic shaping enabled, then traffic shaping is enabled for the
connection. Note that enabling traffic shaping may have no effect
under certain cases. These cases are listed in the description of the
trafficShaping operational attribute, which is under the Vcc Tm and
Vpc Tm components.
When disabled is selected, traffic shaping for this connection is
disabled.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.2.10.1.50 |
atmIfVptIispSigVcdUnshapedTransmitQueueingThis attribute only applies when this connection is unshaped. This
attribute specifies the transmit queueing method for this connection
if it is unshaped. Refer to the unshapedTransmitQueueing attribute
under the AtmIf CA service category subcomponent for more details
on the meaning of this attribute.
When this attribute is set to sameAsCa, the transmit queueing
method for the connection is based on the
unshapedTransmitQueueing attribute of the connection's service
category component under the ConnectionAdministrator.
When this attribute is set to common, transmit traffic on this
unshaped connection is destined for the common queue.
The value sameAsInterface is for migration from previous software
releases, but should no longer be usedrw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.2.10.1.60 |
atmIfVptIispSigVcdUsageParameterControlThis attribute specifies whether this connection enforces usage
parameter control when receiving traffic from the ATM interface.
When sameAsCa is selected, UPC for the connection is based on
the usageParameterControl attribute of the connection's service
category component under the ConnectionAdministrator. If the
service category has UPC enabled, then UPC is enabled for the
connection. Note that enabling UPC may have no effect under
certain cases. These cases are listed in the description of the
usageParameterControl operational attribute, which is under the
Vcc Tm or Vpc Tm component.
When disabled is selected, UPC for this connection is disabled.
The value sameAsInterface is for migration from previous software
releases, but should no longer be usedrw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.2.10.1.70 |
atmIfVptIispSigVcdTdpTableThis attribute is a vector of five traffic parameters whose meanings
are defined by the trafficDescType attribute. The values of peak cell
rate (PCR), sustained cell rate (SCR) and requested shaping rate are
expressed in cell/s. Maximum burst size (MBS) is expressed in
cells. CDVT is expressed in microseconds. The values of PCR,
SCR, MBS and CDVT are used for connection admission control
(CAC). The value of CDVT is only used for connections where the
atmServiceCategory is constantBitRate. For all other values of
atmServiceCategory, CDVT is ignored. The values of PCR, SCR
and requested shaping rate are used to determine the actual shaping
rate where traffic shaping is enabled.
When trafficDescType is 3, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3
must be zero.
When trafficDescType is 6, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 7, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 with cell discard; parameter 3 represents the MBS for
CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 8, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 traffic with cell tagging; parameter 3 represents the MBS
for CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
Whenever it is valid for PCR to be specified, parameter 5 may also
be used to specify a requested shaping rate. A non-zero value in
parameter 5 overrides the value in parameter 1 and is used as the
peak cell rate in calculations of CAC and shaping rate.
For trafficDescType 3 the traffic is shaped at the next rate less than
the PCR.
For trafficDescType 6, 7, and 8, the traffic is shaped at the highest
available rate which is between PCR and SCR. However, if there is
no available shaping rate between PCR and SCR, traffic is shaped at
the next rate above the PCR. SEQUENCE OF AtmIfVptIispSigVcdTdpEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.2.387 |
atmIfVptIispSigVcdTdpEntryAn entry in the atmIfVptIispSigVcdTdpTable. AtmIfVptIispSigVcdTdpEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.2.387.1 |
atmIfVptIispSigVcdTdpIndexThis variable represents the atmIfVptIispSigVcdTdpTable
specific index for the atmIfVptIispSigVcdTdpTable. Integer32 .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.2.387.1.1 |
atmIfVptIispSigVcdTdpValueThis variable represents an individual value for the
atmIfVptIispSigVcdTdpTable.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.2.387.1.2 |
atmIfVptIispSigProvTableThis attribute group contains the provisionable attributes for the
Signalling component. SEQUENCE OF AtmIfVptIispSigProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.10 |
atmIfVptIispSigProvEntryAn entry in the atmIfVptIispSigProvTable. AtmIfVptIispSigProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.10.1 |
atmIfVptIispSigVciThis attribute specifies the signalling channel number.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.10.1.1 |
atmIfVptIispSigAddressConversionThis attribute specifies the address conversion on the outgoing
signalling PDUs. The options are none, nativeE164, or nsap. The
none option is the default and if this option is chosen then nothing
is done to the address information element (IE) in the outgoing
signalling message. If nativeE164 option is chosen, then only
NSAP encapsulated E.164 addresses with zeros in the ESI are
converted to native E.164 format in the outgoing signalling
message. If the NSAP address is not encapsulated E.164 or the ESI
field is not zeros and the nativeE164 option is chosen, then the call
is cleared. If the nsap option is chosen, then native E.164 addresses
are converted to NSAP E.164 with zeros in the ESI field; otherwise
the address is in NSAP format and is not changed.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.10.1.2 |
atmIfVptIispSigStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF AtmIfVptIispSigStateEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.11 |
atmIfVptIispSigStateEntryAn entry in the atmIfVptIispSigStateTable. AtmIfVptIispSigStateEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.11.1 |
atmIfVptIispSigAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.11.1.1 |
atmIfVptIispSigOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.11.1.2 |
atmIfVptIispSigUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.11.1.3 |
atmIfVptIispSigOperTableThis attribute contains the operational attributes for the
AtmSignalling component. SEQUENCE OF AtmIfVptIispSigOperEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.12 |
atmIfVptIispSigOperEntryAn entry in the atmIfVptIispSigOperTable. AtmIfVptIispSigOperEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.12.1 |
atmIfVptIispSigLastTxCauseCodeThis attribute indicates the cause code in the last transmitted
signalling message that contains the CAUSE information element.
The cause code is used to describe the reason for generating certain
signalling messages.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.12.1.1 |
atmIfVptIispSigLastTxDiagCodeThis attribute contains the diagnostic code in the last transmitted
signalling message. The diagnostic code is contained in the CAUSE
information element and identifies an information element type or
timer type. The diagnostic code is present only if a procedural error
is detected by the signalling protocol. A diagnostic code is always
accompanied by the cause code. If there is no failure, this attribute
is set to 0.ro Hex .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.12.1.2 |
atmIfVptIispSigLastRxCauseCodeThis attribute contains the cause code in the last received signalling
message that contains the CAUSE information element. The cause
code is used to describe the reason for generating certain signalling
messages.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.12.1.3 |
atmIfVptIispSigLastRxDiagCodeThis attribute contains the diagnostic code in the last received
signalling message. The diagnostic code is contained in the CAUSE
information element and identifies an information element type or
timer type. The diagnostic code is present only if a procedural error
is detected by the signalling protocol. A diagnostic code is always
accompanied by the cause code. If there is no failure, this attribute
is set to 0.ro Hex .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.12.1.4 |
atmIfVptIispSigStatsTableThis attribute group contains the statistics associated with the
AtmSignalling component. SEQUENCE OF AtmIfVptIispSigStatsEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.13 |
atmIfVptIispSigStatsEntryAn entry in the atmIfVptIispSigStatsTable. AtmIfVptIispSigStatsEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.13.1 |
atmIfVptIispSigCurrentConnectionsThis attribute indicates the total number of currently active
connections.roobsolete Counter32 .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.13.1.1 |
atmIfVptIispSigPeakConnectionsThis attribute indicates the high water mark of active point-to-
point and point-to-multipoint connections.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.13.1.2 |
atmIfVptIispSigSuccessfulConnectionsThis attribute counts the total number of switched point-to-
point and point-to-multipoint connections that were successfully
established. The counter wraps to 0 when the maximum value is
exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.13.1.3 |
atmIfVptIispSigFailedConnectionsThis attribute counts the total number of switched connections that
were not successfully established.The counter wraps to 0 when the
maximum value is exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.13.1.4 |
atmIfVptIispSigTxPdusThis attribute counts the number of transmitted signalling
PDUs.The counter wraps to 0 when the maximum value is
exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.13.1.5 |
atmIfVptIispSigRxPdusThis attribute counts the number of received signalling PDUs.The
counter wraps to 0 when the maximum value is exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.13.1.6 |
atmIfVptIispSigCurrentPmpConnectionsThis attribute indicates the number of currently active point-to-
multipoint connections.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.13.1.7 |
atmIfVptIispSigPeakPmpConnectionsThis attribute indicates the high water mark of active point-to-
multipoint connections.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.13.1.8 |
atmIfVptIispSigSuccessfulPmpConnectionsThis attribute counts the total number of switched point-to-
multipoint connections that were successfully established.
The counter wraps to 0 when the maximum value is
exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.13.1.9 |
atmIfVptIispSigFailedPmpConnectionsThis attribute counts the number of switched point-to-
multipoint connections that were not successfully
established.The counter wraps to 0 when the maximum value
is exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.13.1.10 |
atmIfVptIispSigNewCurrentConnectionsThis attribute indicates the total number of currently active point-to-
point and point-to-multipoint connections.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.114.9.6.3.13.1.11 |
atmIfVptIispAddr OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.9.6.4 |
atmIfVptIispAddrRowStatusTableThis entry controls the addition and deletion of
atmIfVptIispAddr components. SEQUENCE OF AtmIfVptIispAddrRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.4.1 |
atmIfVptIispAddrRowStatusEntryA single entry in the table represents a single
atmIfVptIispAddr component. AtmIfVptIispAddrRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.4.1.1 |
atmIfVptIispAddrRowStatusThis variable is used as the basis for SNMP naming of
atmIfVptIispAddr components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.6.4.1.1.1 |
atmIfVptIispAddrComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.6.4.1.1.2 |
atmIfVptIispAddrStorageTypeThis variable represents the storage type value for the
atmIfVptIispAddr tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.6.4.1.1.4 |
atmIfVptIispAddrAddressIndexThis variable represents an index for the atmIfVptIispAddr tables. AsciiStringIndex .1.3.6.1.4.1.3764.1.1.30.114.9.6.4.1.1.10 |
atmIfVptIispAddrAddressTypeIndexThis variable represents an index for the atmIfVptIispAddr tables. Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.6.4.1.1.11 |
atmIfVptIispAddrTermSP OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.9.6.4.2 |
atmIfVptIispAddrTermSPRowStatusTableThis entry controls the addition and deletion of
atmIfVptIispAddrTermSP components. SEQUENCE OF AtmIfVptIispAddrTermSPRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.4.2.1 |
atmIfVptIispAddrTermSPRowStatusEntryA single entry in the table represents a single
atmIfVptIispAddrTermSP component. AtmIfVptIispAddrTermSPRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.4.2.1.1 |
atmIfVptIispAddrTermSPRowStatusThis variable is used as the basis for SNMP naming of
atmIfVptIispAddrTermSP components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.6.4.2.1.1.1 |
atmIfVptIispAddrTermSPComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.6.4.2.1.1.2 |
atmIfVptIispAddrTermSPStorageTypeThis variable represents the storage type value for the
atmIfVptIispAddrTermSP tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.6.4.2.1.1.4 |
atmIfVptIispAddrTermSPIndexThis variable represents the index for the atmIfVptIispAddrTermSP tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.9.6.4.2.1.1.10 |
atmIfVptIispAddrPnniInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.9.6.4.3 |
atmIfVptIispAddrPnniInfoRowStatusTableThis entry controls the addition and deletion of
atmIfVptIispAddrPnniInfo components. SEQUENCE OF AtmIfVptIispAddrPnniInfoRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.4.3.1 |
atmIfVptIispAddrPnniInfoRowStatusEntryA single entry in the table represents a single
atmIfVptIispAddrPnniInfo component. AtmIfVptIispAddrPnniInfoRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.4.3.1.1 |
atmIfVptIispAddrPnniInfoRowStatusThis variable is used as the basis for SNMP naming of
atmIfVptIispAddrPnniInfo components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.6.4.3.1.1.1 |
atmIfVptIispAddrPnniInfoComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.6.4.3.1.1.2 |
atmIfVptIispAddrPnniInfoStorageTypeThis variable represents the storage type value for the
atmIfVptIispAddrPnniInfo tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.6.4.3.1.1.4 |
atmIfVptIispAddrPnniInfoIndexThis variable represents the index for the atmIfVptIispAddrPnniInfo tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.9.6.4.3.1.1.10 |
atmIfVptIispAddrPnniInfoProvTableThis attribute group contains the provisioned attributes relating to
PNNI for a PnniInfo component. SEQUENCE OF AtmIfVptIispAddrPnniInfoProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.4.3.10 |
atmIfVptIispAddrPnniInfoProvEntryAn entry in the atmIfVptIispAddrPnniInfoProvTable. AtmIfVptIispAddrPnniInfoProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.4.3.10.1 |
atmIfVptIispAddrPnniInfoScopeThis attribute specifies the scope of the ATM address, which is the
highest level up to which this address will be advertised in the
PNNI hierarchy. The scope must be set to a value numerically less
than or equal to the level of the lowest level peer group containing
this node. Setting the scope to 0 will cause the address to be
advertised globally within this PNNI routing domain.rw INTEGER (-1..104) .1.3.6.1.4.1.3764.1.1.30.114.9.6.4.3.10.1.1 |
atmIfVptIispAddrPnniInfoReachabilityThis attribute indicates whether the address is internal or exterior.
An internal reachable address is an address of a destination that is
directly attached to the logical node advertising the address. An
exterior reachable address is an address that can be reached
through a PNNI routing domain, but which is not located in that
PNNI routing domain.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.6.4.3.10.1.2 |
atmIfVptIispAddrOperTableThis attribute group contains the operational attributes for the
Address component. SEQUENCE OF AtmIfVptIispAddrOperEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.4.10 |
atmIfVptIispAddrOperEntryAn entry in the atmIfVptIispAddrOperTable. AtmIfVptIispAddrOperEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.4.10.1 |
atmIfVptIispAddrScopeThis attribute indicates the scope of the ATM address, which is the
highest level to which this address will be advertised in the PNNI
hierarchy. If no PnniInfo subcomponent has been provisioned, then
the scope will default to the level of this node in the PNNI
hierarchy. If this node does not participate in a PNNI hierarchy, then
this attribute will have the value of -1.ro INTEGER (-1..104) .1.3.6.1.4.1.3764.1.1.30.114.9.6.4.10.1.1 |
atmIfVptIispAddrReachabilityThis attribute indicates whether the address is internal or exterior.
An internal reachable address is an address of a destination that is
directly attached to the logical node advertising the address. An
exterior reachable address is an address that can be reached
through a PNNI routing domain, but which is not located in that
PNNI routing domain.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.6.4.10.1.2 |
atmIfVptIispProvTableThis group contains the provisionable attributes for the Iisp
component. SEQUENCE OF AtmIfVptIispProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.10 |
atmIfVptIispProvEntryAn entry in the atmIfVptIispProvTable. AtmIfVptIispProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.10.1 |
atmIfVptIispVersionThis attribute indicates which specification the IISP interface
complies with. The options are iisp10Sig30 which refers to IISP
version 1.0 with 3.0 signalling and iisp10Sig31 which refers to IISP
version 1.0 with 3.1 signalling. If this attribute is changed, all
switched Vcc components in this interface are cleared due to the
fact that the two versions are incompatible.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.6.10.1.1 |
atmIfVptIispSideThis attribute indicates which side the interface is, user or network.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.6.10.1.2 |
atmIfVptIispSoftPvcRetryPeriodThis attribute specifies the time to wait between call set up retries.
The resolution is to the nearest 10 seconds.
This attribute has been obsoleted and is replaced by the
softPvpAndPvcRetryPeriod attribute.rwobsolete Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.6.10.1.3 |
atmIfVptIispSoftPvpAndPvcRetryPeriodThis attribute specifies the time to wait between soft PVP or soft
PVC call setup retries. The resolution is to the nearest 10 seconds.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.6.10.1.4 |
atmIfVptIispSoftPvpAndPvcHoldOffTimeThis attribute specifies how long to hold off retries following a
release or the connection. The resolution is to the nearest 50 ms.rw Unsigned32 (0 | 50..20000) .1.3.6.1.4.1.3764.1.1.30.114.9.6.10.1.5 |
atmIfVptIispAcctOptTableThis group contains the provisionable attributes for accounting. SEQUENCE OF AtmIfVptIispAcctOptEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.11 |
atmIfVptIispAcctOptEntryAn entry in the atmIfVptIispAcctOptTable. AtmIfVptIispAcctOptEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.11.1 |
atmIfVptIispAccountCollectionThis attribute is used to turn accounting on or off for SVC and
SPVC connections. It also specifies the reason(s) for which
accounting data is collected: billing, test, study, audit, or force.
If the set of reasons is not empty then accounting records will be
generated by this interface in the following situations:
- on a TODA changeover if TODA is enabled;
- every 12 hours (per connection) if TODA is disabled;
- on every call clear (a call record with final cell counts).
If none of the reasons is present, then accounting will be
suppressed.
The reason for collection is recorded in the accounting record, in
the attribute callingCollectReason or calledCollectReason as
appropriate.
Description of bits:
bill(0)
test(1)
study(2)
audit(3)
force(4)rw OCTET STRING .1.3.6.1.4.1.3764.1.1.30.114.9.6.11.1.1 |
atmIfVptIispAccountConnectionTypeThis attribute specifies whether accounting records generated by
this interface should be marked as originating, terminating or
intermediate. This attribute, in combination with the direction of the
call, determines the value of attribute connPointType of the
accounting record and may be used by downstream accounting
processes to correlate the records.
If the value is origTerm then records generated for incoming calls
will be marked as originating and records generated for outgoing
calls will be marked as terminating.
If the value is intermediate then records generated for all calls will
be marked as intermediate.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.6.11.1.2 |
atmIfVptIispAccountClassThis attribute specifies the accounting class associated with the
interface. Its meaning is determined by the network operator.
Its value is simply recorded in the accounting records generated by
this interface, in the attribute callingServiceType or
calledServiceType as appropriate.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.6.11.1.3 |
atmIfVptIispServiceExchangeThis attribute specifies the data service exchange associated with
this interface. Its meaning is determined by the network operator.
Its value is simply recorded in the accounting records generated by
this interface, in the attribute callingDse or calledDse as
appropriate.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.6.11.1.4 |
atmIfVptIispVProvTableThis group contains the provisionable attributes for the Iisp
component which are specific to virtual IISP interfaces. SEQUENCE OF AtmIfVptIispVProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.12 |
atmIfVptIispVProvEntryAn entry in the atmIfVptIispVProvTable. AtmIfVptIispVProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.6.12.1 |
atmIfVptIispVpciThis attribute specifies the Virtual Path Connection Identifier
(VPCI) to be used between this signalling entity and its peer. The
VPCI of the peer virtual IISP must have the same value for
switched connections to be set up across the interface.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.6.12.1.1 |