NV-ATKK-MIB
Standard SNMP MIB module defining data structures for NV-ATKK-MIB.
Imported Objects
Objects
27 total| Object Name |
|---|
c3716TR OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.207.1.3.6.1.4.1.207.8.8.3 |
RFC1213-MIB Unknown .1.3.6.1.4.1.1.3.6.1.4.1.207.207.1.3.6.1.4.1.207.8.8.3 |
atiSystemConfig OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.207.1.3.6.1.4.1.207.8.8.3.1 |
atiSysSerialnoSerial number.ro DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.207.207.1.3.6.1.4.1.207.8.8.3.1.1 |
atiSysTftpIPAddressTFTP Server IP address.rw NetworkAddress .1.3.6.1.4.1.1.3.6.1.4.1.207.207.1.3.6.1.4.1.207.8.8.3.1.2 |
atiSysTftpFilenameTFTP file name.rw DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.207.207.1.3.6.1.4.1.207.8.8.3.1.3 |
atiSysPowerupCountPowerup Count.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.207.207.1.3.6.1.4.1.207.8.8.3.1.4 |
atiSysBrcastCutoffRateBroadcast Cutoff Rate. (0..100000)rw INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.207.207.1.3.6.1.4.1.207.8.8.3.1.5 |
atiSysGatewayIPAddressGateway IP address.rw NetworkAddress .1.3.6.1.4.1.1.3.6.1.4.1.207.207.1.3.6.1.4.1.207.8.8.3.1.6 |
atiPortTableThe port setup table. SEQUENCE OF AtiPortentry .1.3.6.1.4.1.1.3.6.1.4.1.207.207.1.3.6.1.4.1.207.8.8.3.2 |
atiPortEntryThe port setup entry. AtiPortentry .1.3.6.1.4.1.1.3.6.1.4.1.207.207.1.3.6.1.4.1.207.8.8.3.2.1 |
atiPortA number from 1 to number of ports on the switch.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.207.207.1.3.6.1.4.1.207.8.8.3.2.1.1 |
atiPortStatusPort status.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.207.1.3.6.1.4.1.207.8.8.3.2.1.2 |
atiPortDuplexStatusPort duplex status.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.207.1.3.6.1.4.1.207.8.8.3.2.1.3 |
atiPortForwardedFramesNumber of frames received on this port and forwarded to another port on the system module for processing.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.207.207.1.3.6.1.4.1.207.8.8.3.2.1.4 |
atiPortRcvdLocalFramesNumber of frames received where the destination is on this port.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.207.207.1.3.6.1.4.1.207.8.8.3.2.1.5 |
atiSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.207.207.1.3.6.1.4.1.207.8.8.3.3 |
atiSwitchIPAddressSince bridges can now be accessed without an IP address,
there needs to be a way to find out there addresses.rw NetworkAddress .1.3.6.1.4.1.1.3.6.1.4.1.207.207.1.3.6.1.4.1.207.8.8.3.3.1 |
atiSwitchSubnetMaskThe switch's submask.rw NetworkAddress .1.3.6.1.4.1.1.3.6.1.4.1.207.207.1.3.6.1.4.1.207.8.8.3.3.2 |
atiActiveAgingTimeActive Aging Time.rw INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.207.207.1.3.6.1.4.1.207.8.8.3.3.3 |
atiPurgeAgingTimePurge Aging Time.rw INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.207.207.1.3.6.1.4.1.207.8.8.3.3.4 |
atiSwitchSTPStatusThe switch's Spanning Tree status, enter ON or OFF.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.207.207.1.3.6.1.4.1.207.8.8.3.3.5 |
atiSwitchManagerThe 1th SNMP Trap Destination.rw NetworkAddress .1.3.6.1.4.1.1.3.6.1.4.1.207.207.1.3.6.1.4.1.207.8.8.3.3.6 |
atiSwitcTrapRcvr1The 1th SNMP Trap Destination.rw NetworkAddress .1.3.6.1.4.1.1.3.6.1.4.1.207.207.1.3.6.1.4.1.207.8.8.3.3.6.1 |
atiSwitcTrapRcvr2The 2th SNMP Trap Destination.rw NetworkAddress .1.3.6.1.4.1.1.3.6.1.4.1.207.207.1.3.6.1.4.1.207.8.8.3.3.6.2 |
atiSwitcTrapRcvr3The 3th SNMP Trap Destination.rw NetworkAddress .1.3.6.1.4.1.1.3.6.1.4.1.207.207.1.3.6.1.4.1.207.8.8.3.3.6.3 |
atiSwitcTrapRcvr4The 4th SNMP Trap Destination.rw NetworkAddress .1.3.6.1.4.1.1.3.6.1.4.1.207.207.1.3.6.1.4.1.207.8.8.3.3.6.4 |
More MIBs from Proteon
Browse all ProteonMIBs →SNMP MIB module
The LANCOM-1711-PLUS-MIB provides the management information base definitions required for SNMP-based monitoring and configuration of the LANCOM 1711 PLUS router, enabling the retrieval of device-specific operational metrics such as interface statistics, system health indicators, and routing table states.
The LANCOM-1722-MIB module enables SNMP-based monitoring and management of the LANCOM 1722 VoIP gateway, specifically exposing Annex B-defined metrics for voice session states, call quality parameters, and telephony interface statistics.
The LANCOM-1721-MIB module provides SNMP management capabilities for the LANCOM 1721 VPN router, specifically exposing metrics defined in Annex B to monitor VPN tunnel states, security associations, and interface statistics. This module enables network administrators to track connection status, throughput counters, and error conditions for the device's integrated VPN functionality.
The LANCOM-1711-MIB module enables monitoring and management of VPN tunnel states, cryptographic session statistics, and interface parameters specifically for LANCOM 1711+ series routers. It provides access to counters for IPsec and PPTP tunnel establishment failures, throughput metrics, and device health indicators required for maintaining secure WAN connectivity on this hardware platform.
The LCOS-SX-MIB module provides SNMP management definitions for Brocade (now Broadcom) LCOS SX switches, enabling the monitoring of Layer 2 Ethernet switch metrics including port status, traffic counters, error statistics, and spanning tree states.