NTNTECH-MTM-MIB
This mib module defines an SNMP API to manage Paradyne Corporation's Quality of Service attributes on a per port basis.
Main OID:
ntntechMTMMIB.1.3.6.1.4.1.8059.1.2.3
65
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
65 total| Object Name |
|---|
ntntechMTMMIBThis mib module defines an SNMP API to manage Paradyne Corporation's Quality of Service attributes on a per port basis. MODULE-IDENTITY .1.3.6.1.4.1.8059.1.2.3 |
mtmMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.8059.1.2.3.1 |
diffServTableThis table describes objects applicable to managing a Differentiated Services Code Point (DSCP) Rule. DSCP provides OSI Layer 3 identification information within a packet's IP header for the purpose of determining packet type. Up to four (4) seperate DiffServ Rules may be configured per port. SEQUENCE OF DiffServEntry .1.3.6.1.4.1.8059.1.2.3.1.2 |
diffServEntry DiffServEntry .1.3.6.1.4.1.8059.1.2.3.1.2.1 |
diffServIndexA pointer to one of four possible DSCP Rules that can be assigned to a port.ro INTEGER .1.3.6.1.4.1.8059.1.2.3.1.2.1.1 |
diffServActivateRuleActivate or deactivate the rule that is represented by the remaining attributes of this table.rw Enumeration .1.3.6.1.4.1.8059.1.2.3.1.2.1.2 |
diffServDSValueThe value assigned to a port which designates the Differentiated Services Code Point. This is a hexidecimal value calculated from the upper six (6) bits of an eight (8) bit field in the packet's IP header (the remaining two[2] bits are unused). It is one of several methods used to determine packet type. Configuring this value requires knowledge of the users (desired) network traffic and, as such, a default value is not applicable (indicated as 00).rw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.2.1.3 |
diffServDSMaskThe value assigned indicates which six (6) bits of the DSCP will be utilized in considering the packets DSCP type. Default is 252, indicating that all of the DSCP's upper six bits will be used in calculating the packet's DS value.rw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.2.1.4 |
diffServAllowTagOnIngressThe value assigned will determine a path for ingress packets. Tag (1) indicates that only ingress packets with a vlan tag to be considered; all ingress packets without a VLAN tag will be dropped. Untag (2) indicates that only ingress packets without a VLAN tag will be considered. All ingress packets with a VLAN tag will be dropped.rw Enumeration .1.3.6.1.4.1.8059.1.2.3.1.2.1.5 |
diffServVlanIDStartIf diffServAllowTagOnIngress is set to tag(1), then this value dictates the beginning of a VLAN range that ingress packets will be allowed to have. If diffServAllowTagOnIngress is set to untag(2), and diffServTagActionOnIngress is set to add(1) then this value dictates what VLAN ID to add to all ingress packets.rw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.2.1.6 |
diffServVlanIDEndIf diffServAllowTagOnIngress is set to tag(1), then this value dictates the end of a VLAN range that ingress packets will be allowed to have.rw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.2.1.7 |
diffServTagActionOnIngressThe value assigned will alter the VLAN information of the Ingress Packet. 1 -- Add VLAN information to the Ingress Packet 2 -- Keep VLAN information on the Ingress Packet 3 -- Replace VLAN information on the Ingress Packet to diffServReplaceVlanID 4 -- Drop the Ingress Packet 5 -- Inaction -- No Action to the VLAN information on the Ingress Packet add(1) and inaction(5) are only valid if you have chosen untag(2) for the attribute diffServAllowTagOnIngress. keep(2) and replace(3) are only valid if tag(1) is chosen for the attribute diffServAllowTagOnIngress.rw Enumeration .1.3.6.1.4.1.8059.1.2.3.1.2.1.8 |
diffServReplaceVlanIDThe value assigned dictates to which VLAN ID we will change the ingress packets VLAN ID. This attribute is valid only if tag(1) is chosen for diffServAllowTagOnIngress and replace(3) is chosen for diffServTagActionOnIngress.rw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.2.1.9 |
diffServPriorityThe value assigned to a port which indicates VLAN priority. This priority is relevant both within the DSLAM and at egress.rw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.2.1.10 |
diffServFixedMaxValueThe value assigned dictates the action to be taken with the configured diffServPriority for tagged ingress packets. The default value is fixed(1). If set to fixed(1), the packet's ingress priority will automatically be replaced with the diffServPriority. If set to max(2), the packet's ingress priority will only be replaced with the diffServPriority if the packet's ingress priority is higher than the diffServPriority.rw Enumeration .1.3.6.1.4.1.8059.1.2.3.1.2.1.11 |
diffServIngressRateLimitThe value assigned allows traffic-specific, rule-specific, bandwidth limits for each port. The unit of measure is kbps. The default value is 0 (no limit).rw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.2.1.12 |
diffServEgressRateLimitThe value assigned allows traffic-specific, rule-specific, bandwidth limits for each port. The unit of measure is kbps. The default value is 0 (no limit).rw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.2.1.13 |
diffServBackboneVlanIDThe value assigned will dictate what VLAN ID we add as the Q-in-Q VLAN ID to all ingress traffic passing this diffserv rule set.rw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.2.1.14 |
diffServPVCIndexThe value assigned describes a PVC index that the ingress traffic defined by this diffServ rule is expected to be received on.rw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.2.1.15 |
ipRangeTableThis table defines MTM rules associated with an IP Address or an IP Address Range. Up to four (4) seperate IP Range Rules may be configured per port. SEQUENCE OF IPRangeEntry .1.3.6.1.4.1.8059.1.2.3.1.4 |
ipRangeEntryAn entry containing management information applicable to an IPD12000, IPD4000 Access/Inverse module and Mini/Micro DSLAM port. IPRangeEntry .1.3.6.1.4.1.8059.1.2.3.1.4.1 |
ipRangeIndexA pointer to one of four possible IP Range Rules that can be assigned to a port.ro INTEGER .1.3.6.1.4.1.8059.1.2.3.1.4.1.1 |
ipRangeActivateRuleSetting this value, activates the rule that is represented by the remaining attributes of this table.rw Enumeration .1.3.6.1.4.1.8059.1.2.3.1.4.1.2 |
ipRangeStartThe value assigned to a port which designates the start of an IP range. Packets containing a source and/or desitination IP address that falls within the configured range will match the IP portion of the IP Range Rule. Default is 0.0.0.0.rw NtnIpAddress (NTNTECH-ROOT-MIB) .1.3.6.1.4.1.8059.1.2.3.1.4.1.3 |
ipRangeEndThe value assigned to a port which designates the end of an IP range. Packets containing a source and/or destination IP address that falls within the configured range will match the IP portion of the IP Range Rule. Default is 0.0.0.0.rw NtnIpAddress (NTNTECH-ROOT-MIB) .1.3.6.1.4.1.8059.1.2.3.1.4.1.4 |
ipRangeAllowTagOnIngressThe value assigned will determine a path for ingress packets. Tag indicates that only ingress packets with a vlan tag to be considered; all ingress packets without a VLAN tag will be dropped. Untag indicates that only ingress packets without a VLAN tag will be considered. All ingress packets with a VLAN tag will be dropped.rw Enumeration .1.3.6.1.4.1.8059.1.2.3.1.4.1.5 |
ipRangeVlanIDStartThe value assigned to a port which designates the start of a VLAN ID range. This should only be defined if vlanRulesAllowTagOnIngress is set to tag (1).rw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.4.1.6 |
ipRangeVlanIDEndThe value assigned to a port which designates the end of a VLAN ID range. This should only be defined if vlanRulesAllowTagOnIngress is set to tag (1).rw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.4.1.7 |
ipRangeTagActionOnIngressThe value assigned will alter the VLAN information of the Ingress Packet. 1 -- Add VLAN information to the Ingress Packet 2 -- Keep VLAN information on the Ingress Packet 3 -- Replace VLAN information on the Ingress Packet 4 -- Drop the Ingress Packet 5 -- Inaction -- No Action to the VLAN information on the Ingress Packet Add (1) and No Action (5) are only valid if you have chosen Untag (2) for the attribute ipRangeAllowTagOnIngress. Keep(2) and Replace(3) are only valid if Tag (1) is chosen for the attribute ipRangeAllowTagOnIngress.rw Enumeration .1.3.6.1.4.1.8059.1.2.3.1.4.1.8 |
ipRangePriorityThe value assigned to a port which indicates priority. This priority is relevant both within the DSLAM and at egress.rw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.4.1.9 |
ipRangeFixedMaxValueThe value assigned dictates the action to be taken with the configured ipRangePriority for tagged ingress packets. The default value is fixed.If set to Fixed, the packet's ingress priority will automatically be replaced with the ipRangeRulePriority. If set to Max, the packet's ingress priority will only be replaced with the ipRangeRulePriority if the packet's ingress priority is higher than the ipRangeRulePriority.rw Enumeration .1.3.6.1.4.1.8059.1.2.3.1.4.1.10 |
ipRangeIngressRateLimitThe value assigned allows traffic-specific, rule-specific, bandwidth limits for each port. The unit of measure is kbps. The default value is 0 (no limit).rw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.4.1.11 |
ipRangeEgressRateLimitThe value assigned allows traffic-specific, rule-specific, bandwidth limits for each port. The unit of measure is kbps. The default value is 0 (no limit).rw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.4.1.12 |
ipRangeBackboneVlanIDrw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.4.1.13 |
ipRangePVCIndexThe value assigned describes a PVC that is assigned to this port for MTM purposes.rw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.4.1.14 |
macAddrRangeTableThis table defines MTM rules associated with a Mac Address or Mac Address Range. These rules can be established on a per port basis. Up to four (4) seperate Mac Address Rules may be configured per port. SEQUENCE OF MacAddrRangeEntry .1.3.6.1.4.1.8059.1.2.3.1.6 |
macAddrRangeEntryAn entry containing management information applicable to an IPD12000, IPD4000 Access/Inverse module and Mini/Micro DSLAM port. MacAddrRangeEntry .1.3.6.1.4.1.8059.1.2.3.1.6.1 |
macAddrRangeIndexA pointer to one of four possible Mac Address Rules that can be assigned to a port.ro INTEGER .1.3.6.1.4.1.8059.1.2.3.1.6.1.1 |
macAddrRangeActivateRuleSetting this value, activates the rule that is represented by the remaining attributes of this table.rw Enumeration .1.3.6.1.4.1.8059.1.2.3.1.6.1.2 |
macAddrRangeStartThe value assigned to a port which designates the start of a MAC Address range. This should only be defined if macaddrAllowTagOnIngress is set to tag.rw NtnMacAddress (NTNTECH-ROOT-MIB) .1.3.6.1.4.1.8059.1.2.3.1.6.1.3 |
macAddrRangeEndThe value assigned to a port which designates the end of a MAC Address range. This should only be defined if macaddrAllowTagOnIngress is set to tag.rw NtnMacAddress (NTNTECH-ROOT-MIB) .1.3.6.1.4.1.8059.1.2.3.1.6.1.4 |
macAddrRangeAllowTagOnIngressThe value assigned will determine a path for ingress packets. Tag(1) indicates that only ingress packets with a vlan tag to be considered; all ingress packets without a VLAN tag will be dropped. Untag(2) indicates that only ingress packets without a VLAN tag will be considered. All ingress packets with a VLAN tag will be dropped.rw Enumeration .1.3.6.1.4.1.8059.1.2.3.1.6.1.5 |
macAddrRangeVlanIDStartThe value assigned to a port which designates the start of a VLAN ID range. This should only be defined if vlanRulesAllowTagOnIngress is set to tag (1).rw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.6.1.6 |
macAddrRangeVlanIDEndThe value assigned to a port which designates the end of a VLAN ID range. This should only be defined if vlanRulesAllowTagOnIngress is set to tag (1).rw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.6.1.7 |
macAddrRangeTagActionOnIngressThe value assigned will alter the VLAN information of the Ingress Packet. 1 -- Add VLAN information to the Ingress Packet 2 -- Keep VLAN information on the Ingress Packet 3 -- Replace VLAN information on the Ingress Packet 4 -- Drop the Ingress Packet 5 -- Inaction -- No Action to the VLAN information on the Ingress Packet Add (1) and No Action (5) are only valid if you have chosen Untag (2) for the attribute macAddrAllowTagOnIngress.Keep(2) and Replace(3) are only valid if Tag (1) is chosen for the attribute macAddrAllowTagOnIngressrw Enumeration .1.3.6.1.4.1.8059.1.2.3.1.6.1.8 |
macAddrRangePriorityThe value assigned to a port which indicates VLAN priority. This priority is relevant both within the DSLAM and at egress.rw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.6.1.9 |
macAddrRangeFixedMaxValueThe value assigned dictates the action to be taken with the configured macaddrPriority for tagged ingress packets. The default value is fixed. If set to Fixed, the packet's ingress priority will automatically be replaced with the macAddrPriority. If set to Max, the packet's ingress priority will only be replaced with the macAddrPriority if the packet's ingress priority is higher than the Mac Address Rule Priority.rw Enumeration .1.3.6.1.4.1.8059.1.2.3.1.6.1.10 |
macAddrRangeIngressRateLimitThe value assigned allows traffic-specific, rule-specific, bandwidth limits for each port. The unit of measure is kbps. The default value is 0 (no limit).rw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.6.1.11 |
macAddrRangeEgressRateLimitThe value assigned allows traffic-specific, rule-specific, bandwidth limits for each port. The unit of measure is kbps. The default value is 0 (no limit).rw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.6.1.12 |
macAddrRangeBackboneVlanIDrw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.6.1.13 |
macAddrRangePVCIndexThe value assigned describes a PVC that is assigned to this port for MTM purposes.rw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.6.1.14 |
vlanRulesTableThis table defines MTM rules associated with a VLAN or a VLAN Range. These rules can be established on a per port basis. Up to ten (10) seperate VLAN Rules may be configured per port. SEQUENCE OF VLANRulesEntry .1.3.6.1.4.1.8059.1.2.3.1.8 |
vlanRulesEntryAn entry containing management information applicable to an IPD12000, IPD4000 Access/Inverse module and Mini/Micro DSLAM port. VLANRulesEntry .1.3.6.1.4.1.8059.1.2.3.1.8.1 |
vlanRulesVLANIndexA pointer to one of ten possible VLAN Rules that can be assigned to a port.ro INTEGER .1.3.6.1.4.1.8059.1.2.3.1.8.1.1 |
vlanRulesActivateRuleSetting this value, activates the rule that is represented by the remaining attributes of this table.rw Enumeration .1.3.6.1.4.1.8059.1.2.3.1.8.1.2 |
vlanRulesAllowTagOnIngressThe value assigned will determine a path for ingress packets. Tag indicates that only ingress packets with a vlan tag to be considered; all ingress packets without a VLAN tag will be dropped. Untag indicates that only ingress packets without a VLAN tag will be considered. All ingress packets with a VLAN tag will be dropped.rw Enumeration .1.3.6.1.4.1.8059.1.2.3.1.8.1.3 |
vlanRulesVLANIdStartThe value assigned to a port which designates the start of a VLAN ID range. This should only be defined if vlanRulesAllowTagOnIngress is set to tag.rw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.8.1.4 |
vlanRulesVLANIdEndThe value assigned to a port which designates the end of a VLAN ID range. This should only be defined if vlanRulesAllowTagOnIngress is set to tag.rw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.8.1.5 |
vlanRulesTagActionOnIngressThe value assigned will allow VLAN information to be added to the Ingress Packet. 1 -- Add VLAN information to the Ingress Packet 2 -- Keep VLAN information on the Ingress Packet 3 -- Replace VLAN information on the Ingress Packet 4 -- Drop the Ingress Packet 5 -- Inaction -- No Action to the VLAN information on the Ingress Packet Add (1) and No Action (5) are only valid if you have chosen Untag (2) for the attribute vlanRulesAllowTagOnIngress.Keep(2) and Replace(3) are only valid if Tag (1) is chosen for the attribute vlanRulesAllowTagOnIngress.rw Enumeration .1.3.6.1.4.1.8059.1.2.3.1.8.1.6 |
vlanRulesPriorityThe value assigned to a port which indicates VLAN priority. This priority is relevant both within the DSLAM and at egress.rw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.8.1.7 |
vlanRulesFixedMaxValueThe value assigned dictates the action to be taken with the configured vlanRulesPriority for tagged ingress packets. The default value is fixed. If set to Fixed, the packet's ingress priority will automatically be replaced with the vlanRulesPriority. If set to Max, the packet's ingress priority will only be replaced with the vlanRulesPriority if the packet's ingress priority is higher than the vlanRulesPriority.rw Enumeration .1.3.6.1.4.1.8059.1.2.3.1.8.1.8 |
vlanRulesIngressRateLimitThe value assigned allows traffic-specific, rule-specific, bandwidth limits for each port. The unit of measure is kbps. The default value is 0 (no limit).rw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.8.1.9 |
vlanRulesEgressRateLimitThe value assigned allows traffic-specific, rule-specific, bandwidth limits for each port. The unit of measure is kbps. The default value is 0 (no limit).rw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.8.1.10 |
vlanRulesBackboneVlanIDrw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.8.1.11 |
vlanRulesPVCIndexThe value assigned describes a PVC that is assigned to this port for MTM purposes.rw INTEGER .1.3.6.1.4.1.8059.1.2.3.1.8.1.12 |