NTNTECH-CHASSIS-CONFIGURATION-MIB
AI MIB Summary
The NTNTECH-CHASSIS-CONFIGURATION-MIB provides SNMP-based configuration management for Paradyne DSLAM chassis hardware, specifically targeting the MUM200-2, MUM2000-2, and various Mini/Micro SDSL/ADSL models (SMD2000, SuD2011, SuD2002 series). It enables remote monitoring and control of critical chassis parameters, including uplink interface module status (UIM-10/100, UIM-DS3, UIM-E1, UIM-E3, UIM-T1) and line encoding modes (2B1Q, G.SHDSL, G.lite) across these
This mib module defines an SNMP API to manage the Paradyne Corporation's DSLAM chassis parameters. These parameter settings are specifically associated with the the MUM200-2 and MUM2000-2 modules and the Mini and Micro DSLAMs. The interface types are described below, AMD8000-12 12-Port ADSL Mini DSLAMs With Full Rate and G.lite Operational Modes SMD2000-12, SMD2000Q-12, SMD2000G-12 12-Port SDSL Mini DSLAMs: AC and DC Versions with Cap, 2B1Q and G.SHDSL line encoding SuD2011_12T, SuD2011_12E, SuD2003_12T, SuD2003_12E 12-Port SDSL Micro DSLAMs: Cap, 2B1Q and G.SHDSL line encoding SuD2011_6T, SuD2011_6E, SuD2002_6T, SuD2002_6E 6-Port SDSL Micro DSLAMs: Cap, 2B1Q and G.SHDSL line encoding MUM200-2, MUM2000-2 Multiplexer Uplink Module with Dual Uplink Interface Module Capacity UIM-10/100 Uplink Interface Module UIM-DS3 DS3 Uplink Interface Module UIM-E1 E1 Uplink Interface Module UIM-E3 E3 Uplink Interface Module UIM-T1 T1 Uplink Interface Module
Main OID:
ntntechChassisConfigurationMIB.1.3.6.1.4.1.8059.1.1.1
65
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
65 total| Object Name |
|---|
ntntechChassisConfigurationMIBThis mib module defines an SNMP API to manage the Paradyne Corporation's DSLAM chassis parameters. These parameter settings are specifically associated with the the MUM200-2 and MUM2000-2 modules and the Mini and Micro DSLAMs. The interface types are described below, AMD8000-12 12-Port ADSL Mini DSLAMs With Full Rate and G.lite Operational Modes SMD2000-12, SMD2000Q-12, SMD2000G-12 12-Port SDSL Mini DSLAMs: AC and DC Versions with Cap, 2B1Q and G.SHDSL line encoding SuD2011_12T, SuD2011_12E, SuD2003_12T, SuD2003_12E 12-Port SDSL Micro DSLAMs: Cap, 2B1Q and G.SHDSL line encoding SuD2011_6T, SuD2011_6E, SuD2002_6T, SuD2002_6E 6-Port SDSL Micro DSLAMs: Cap, 2B1Q and G.SHDSL line encoding MUM200-2, MUM2000-2 Multiplexer Uplink Module with Dual Uplink Interface Module Capacity UIM-10/100 Uplink Interface Module UIM-DS3 DS3 Uplink Interface Module UIM-E1 E1 Uplink Interface Module UIM-E3 E3 Uplink Interface Module UIM-T1 T1 Uplink Interface Module MODULE-IDENTITY .1.3.6.1.4.1.8059.1.1.1 |
chsCfgMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.8059.1.1.1.1 |
chsCfgParameterConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.8059.1.1.1.1.1 |
prmCfgMultiplexerUplinkModule OBJECT IDENTIFIER .1.3.6.1.4.1.8059.1.1.1.1.1.1 |
mumCfgNotesThe chassis system 'Notes' field is to be used as a scratchpad (i.e. chassis id or name) by the administrator. The default value is blank. The length of string must not exceed 128 alpha-numeric characters.rw NtnDisplayString (NTNTECH-ROOT-MIB) .1.3.6.1.4.1.8059.1.1.1.1.1.1.1 |
mumCfgTableA list of MUM200-2/2000-2 module or Mini/Micro DSLAM entries. SEQUENCE OF MumCfgEntry .1.3.6.1.4.1.8059.1.1.1.1.1.1.2 |
mumCfgEntryAn entry containing management information applicable to a MUM200-2/MUM2000-2 module or Mini/Micro DSLAM. MumCfgEntry .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1 |
mumCfgIndexTranslates to the physical slot number that a MUM200-2/2000-2 module exists within a chassis. The Mini/Micro DSLAMs' physical location is set to 1 by default. See below, chassis type physical location(s) translation ------------ -------------------------------- IPD12000 MUM in slots 13,14 = mumCfgIndex 1,2 respecitively IPD4000 MUM in slot 5 = mumCfgIndex 1 Mini DSLAM NA = mumCfgIndex 1 Micro DSLAM NA = mumCfgIndex 1ro INTEGER .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.1 |
mumCfgIpAddressIP Address assigned to a MUM200-2/2000-2 module or Mini/Micro DSLAM. This parameter is initially set to a default value, i.e 192.168.254.252 for a MUM200-2/2000-2 module located in slot 13 of an IPD12000, slot 5 of an IPD4000 DSLAM and a Mini/Micro DSLAM. The default value of 192.168.254.253 will be for a MUM200-2/2000-2 module located in slot 14 of an IPD12000 (duplicate IP addresses are not allowed). These default values can be modified by the user.rw IpAddress .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.2 |
mumCfgSubnetMaskThe Subnet Mask assigned to a MUM200-2/2000-2 module or Mini/Micro DSLAM. This parameter is assiged by the user, the default value is 255.255.255.0.rw IpAddress .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.3 |
mumCfgDefaultGatewayThe Default Gateway assigned to a MUM200-2/2000-2 module or Mini/Micro DSLAM. This value is assiged by the user, the default value is 0.0.0.0.rw IpAddress .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.4 |
mumCfgInbandMgmtInband management feature, when enabled [ON(1)], allows access to the DSLAM via the network against an assigned IP address, subnet mask, and default gateway.rw Enumeration .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.5 |
mumCfgInbandMGMTVlanIDThe IP DSLAM supports 802.1Q Virtual LANs (VLANs). This parameter configuration applies to the inband management traffic only. It does not apply to out of band traffic received from the MGMT port. Note: for the case where the chassis type is an IPD12000 loaded with two MUMs, the setting of this parameter will affect both.rw INTEGER .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.6 |
mumCfgInterConnectionIPD12000 or IPD4000 DSLAM interconnect configuration provides the system manager the ability to daisy-chain one IP DSLAM to another so that a single router may be used for all DSLAMs in the chain.rw Enumeration .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.7 |
mumCfgCommitChangeSet to enabled(1) in order to commit the latest changes to the IP address, subnetmask, default gateway chassis parameters. This is only applicable to the SNE2040G-P and the SNE2040G-S.rw Enumeration .1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.8 |
mumCfgUplinkInterfaceModule OBJECT IDENTIFIER .1.3.6.1.4.1.8059.1.1.1.1.1.1.3 |
uimCfgEthTableA list of ethernet Uplink Interface Module (UIM) entries. SEQUENCE OF UimCfgEthEntry .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.1 |
uimCfgEthEntryAn entry containing information applicable to an ethernet Uplink Interface Module (UIM). UimCfgEthEntry .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.1.1 |
uimCfgEthMumIndexTranslates to the physical slot number that a MUM200-2/2000-2 module exists within a chassis. The Mini/Micro DSLAMs' physical location is set to 1 by default. See below, chassis type physical location(s) translation ------------ -------------------------------- IPD12000 MUM in slots 13,14 = uimCfgEthMumIndex 1,2 respecitively IPD4000 MUM in slot 5 = uimCfgEthMumIndex 1 Mini DSLAM NA = uimCfgEthMumIndex 1 Micro DSLAM NA = uimCfgEthMumIndex 1 Note: when configuring an ethernet UIM, the user must enter the index of the MUM, see above table, that corresponds with the IP address of the remote SNMP agent.ro INTEGER .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.1.1.1 |
uimCfgEthIndexThe physical slot used to access the UIM in the MUM200-2/2000-2 module or Mini/Micro DSLAM.ro INTEGER .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.1.1.2 |
uimCfgEthRxTxRateThe RxTx rate for an ethernet UIM.rw Enumeration .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.1.1.3 |
uimCfgEthDuplexThe current duplex setting for an ethernet UIM.rw Enumeration .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.1.1.4 |
uimCfgT1TableA list of T1 Uplink Interface Module (UIM) entries. SEQUENCE OF UimCfgT1Entry .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.2 |
uimCfgT1EntryAn entry containing information applicable to a T1 Uplink Interface Module (UIM). UimCfgT1Entry .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.2.1 |
uimCfgT1MumIndexTranslates to the physical slot number that a MUM200-2/2000-2 module exists within a chassis. The Mini/Micro DSLAMs' physical location is set to 1 by default. See below, chassis type physical location(s) translation ------------ -------------------------------- IPD12000 MUM in slots 13,14 = uimCfgT1MumIndex 1,2 respecitively IPD4000 MUM in slot 5 = uimCfgT1MumIndex 1 Mini DSLAM NA = uimCfgT1MumIndex 1 Micro DSLAM NA = uimCfgT1MumIndex 1 Note: when configuring a T1 UIM, the user must enter the index of the MUM, see above table, that corresponds with the IP address of the remote SNMP agent.ro INTEGER .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.2.1.1 |
uimCfgT1IndexThe physical slot used to access the UIM in the MUM200-2/2000-2 module or Mini/Micro DSLAM.ro INTEGER .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.2.1.2 |
uimCfgT1FrameThe frame type parameter for a T1 UIM.rw Enumeration .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.2.1.3 |
uimCfgT1LineCodeThe line code parameter for a T1 UIM.rw Enumeration .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.2.1.4 |
uimCfgT1LineBuildoutThe line buildout parameter for a T1 UIM.rw Enumeration .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.2.1.5 |
uimCfgE1TableA list of E1 Uplink Interface Module (UIM) entries. SEQUENCE OF UimCfgE1Entry .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.3 |
uimCfgE1EntryAn entry containing information applicable to an E1 Uplink Interface Module (UIM). UimCfgE1Entry .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.3.1 |
uimCfgE1MumIndexTranslates to the physical slot number that a MUM200-2/2000-2 module exists within a chassis. The Mini/Micro DSLAMs' physical location is set to 1 by default. See below, chassis type physical location(s) translation ------------ -------------------------------- IPD12000 MUM in slots 13,14 = uimCfgE1MumIndex 1,2 respecitively IPD4000 MUM in slot 5 = uimCfgE1MumIndex 1 Mini DSLAM NA = uimCfgE1MumIndex 1 Micro DSLAM NA = uimCfgE1MumIndex 1 Note: when configuring an E1 UIM, the user must enter the index of the MUM, see above table, that corresponds with the IP address of the remote SNMP agent.ro INTEGER .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.3.1.1 |
uimCfgE1IndexThe physical slot used to access the UIM in the MUM200-2/2000-2 module or Mini/Micro DSLAM.ro INTEGER .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.3.1.2 |
uimCfgE1FrameThe frame type parameter for an E1 UIM.rw Enumeration .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.3.1.3 |
uimCfgE1LineCodeThe line code parameter for an E1 UIM.rw Enumeration .1.3.6.1.4.1.8059.1.1.1.1.1.1.3.3.1.4 |
mumSNMPConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.8059.1.1.1.1.1.1.4 |
snmpCfgNoticeIpTableA list of SNMP trap notification Ip Addresses. SEQUENCE OF SnmpCfgNoticeIpEntry .1.3.6.1.4.1.8059.1.1.1.1.1.1.4.1 |
snmpCfgNoticeIpEntryAn entry containing SNMP information applicable to a MUM200-2/MUM2000-2 module or Mini/Micro DSLAM. SnmpCfgNoticeIpEntry .1.3.6.1.4.1.8059.1.1.1.1.1.1.4.1.1 |
snmpCfgNoticeIndexAn integer value that points to one of four trap notification IP addresses.ro INTEGER .1.3.6.1.4.1.8059.1.1.1.1.1.1.4.1.1.1 |
snmpCfgNoticeIpAddressIP Address of the location or computer to which you would like trap notifications sent. The default value is 0.0.0.0 and it can be modified by the user.rw IpAddress .1.3.6.1.4.1.8059.1.1.1.1.1.1.4.1.1.2 |
snmpCfgAuthenticationTrapStateIndicates whether Authentication traps should be generated. By default, this object should have the value enabled(1).rw Enumeration .1.3.6.1.4.1.8059.1.1.1.1.1.1.4.2 |
snmpCfgEnvironmentTrapStateIndicates whether the fan and temperature traps should be generated. By default, this object should have the value enabled(1).rw Enumeration .1.3.6.1.4.1.8059.1.1.1.1.1.1.4.3 |
snmpCfgColdstartTrapStateIndicates whether Cold Start traps should be generated. By default, this object should have the value disabled(2).rw Enumeration .1.3.6.1.4.1.8059.1.1.1.1.1.1.4.4 |
snmpCfgModulePortTrapStateIndicates whether the module present/removed and link up/down traps should be generated. By default, this object should have the value disabled(2).rw Enumeration .1.3.6.1.4.1.8059.1.1.1.1.1.1.4.5 |
snmpCfgCommunity OBJECT IDENTIFIER .1.3.6.1.4.1.8059.1.1.1.1.1.1.4.6 |
comReadWriteAccessThe community string that will allow the user read/write access to the agent. In otherwords, the user will be allowed to view and set parameter attributes. Note: since this is a hidden attribute, for security purposes, when performing a get on this OID the string that is returned will be represented by asterisk(s).rw OCTET STRING .1.3.6.1.4.1.8059.1.1.1.1.1.1.4.6.1 |
comReadOnlyAccessThe community string that will allow the user read access to the agent. In otherwords, the user will be allowed to view parameter attributes. Note: since this is a hidden attribute, for security purposes, when performing a get on this OID the string that is returned will be represented by asterisk(s).rw OCTET STRING .1.3.6.1.4.1.8059.1.1.1.1.1.1.4.6.2 |
mumCfgUniques OBJECT IDENTIFIER .1.3.6.1.4.1.8059.1.1.1.1.1.1.5 |
unqEmbHttpWebsrvrStateThis configuration parameter allows the user the ability to disable, or enable, the embedded webserver. By default, this object should have the value enabled(1).rw Enumeration .1.3.6.1.4.1.8059.1.1.1.1.1.1.5.1 |
mumCfgAdvanced OBJECT IDENTIFIER .1.3.6.1.4.1.8059.1.1.1.1.1.1.6 |
advCfgTableA list of the Advanced Configuration entries. SEQUENCE OF AdvCfgEntry .1.3.6.1.4.1.8059.1.1.1.1.1.1.6.1 |
advCfgEntryAn entry containing information applicable to an Advanced Configuration parameter. AdvCfgEntry .1.3.6.1.4.1.8059.1.1.1.1.1.1.6.1.1 |
advCfgMumIndexTranslates to the physical slot number that a MUM200-2/2000-2 module exists within a chassis. The Mini/Micro DSLAMs' physical location is set to 1 by default. See below, chassis type physical location(s) translation ------------ -------------------------------- IPD12000 MUM in slots 13,14 = uimCfgE1MumIndex 1,2 respecitively IPD4000 MUM in slot 5 = uimCfgE1MumIndex 1 Mini DSLAM NA = uimCfgE1MumIndex 1 Micro DSLAM NA = uimCfgE1MumIndex 1 Note: when configuring an Advanced Configuration parameter, the user must enter the index of the MUM, see above table, that corresponds with the IP address of the remote SNMP agent.ro INTEGER .1.3.6.1.4.1.8059.1.1.1.1.1.1.6.1.1.1 |
advCfgTFTPStateThis configuration parameter allows the user the ability to disable, or enable, the TFTP server. By default, this object should have the value enabled(1).rw Enumeration .1.3.6.1.4.1.8059.1.1.1.1.1.1.6.1.1.2 |
advCfgTelnetStateThis configuration parameter allows the user the ability to disable, or enable, telnet. By default, this object should have the value enabled(1).rw Enumeration .1.3.6.1.4.1.8059.1.1.1.1.1.1.6.1.1.3 |
advCfgMgmtFltrIpStartThe start value for the management IP filter range. This parameter is initially set to a default filter range of 0.0.0.0 - 255.255.255.255. Connection to the management system will be allowed only if the user's Ip address value falls within the defined mumCfgMgmtIpStart and mumCfgMgmtIpEnd range.rw IpAddress .1.3.6.1.4.1.8059.1.1.1.1.1.1.6.1.1.4 |
advCfgMgmtFltrIpEndThe end value for the management IP filter range. This parameter is initially set to a default filter range of 0.0.0.0 - 255.255.255.255. Connection to the management system will be allowed only if the user's Ip address value falls within the defined mumCfgMgmtIpStart and mumCfgMgmtIpEnd range.rw IpAddress .1.3.6.1.4.1.8059.1.1.1.1.1.1.6.1.1.5 |
advCfgMgmtSessionTimeoutThis value defines the length of a password session in seconds. If the session has been idle for a time greater than this value, the browser will be challenged again, even if it has provided authentication credentials with the request.rw NtnTimeTicks (NTNTECH-ROOT-MIB) .1.3.6.1.4.1.8059.1.1.1.1.1.1.6.1.1.6 |
mumCfgManagementPort OBJECT IDENTIFIER .1.3.6.1.4.1.8059.1.1.1.1.1.1.7 |
mgmtPortCfgTableA list of the hardware platform management port entries. SEQUENCE OF MgmtPortCfgEntry .1.3.6.1.4.1.8059.1.1.1.1.1.1.7.1 |
mgmtPortCfgEntryAn entry containing information applicable to the managment (ethernet type) port. MgmtPortCfgEntry .1.3.6.1.4.1.8059.1.1.1.1.1.1.7.1.1 |
mgmtPortCfgMumIndexTranslates to the physical slot number that a MUM200-2/2000-2 module exists within a chassis. The Mini/Micro DSLAMs' physical location is set to 1 by default. See below, chassis type physical location(s) translation ------------ -------------------------------- IPD12000 MUM in slots 13,14 = uimCfgEthMumIndex 1,2 respecitively IPD4000 MUM in slot 5 = uimCfgEthMumIndex 1 Mini DSLAM NA = uimCfgEthMumIndex 1 Micro DSLAM NA = uimCfgEthMumIndex 1 Note: when configuring a management port, the user must enter the index of the MUM, see above table, that corresponds with the IP address of the remote SNMP agent.ro INTEGER .1.3.6.1.4.1.8059.1.1.1.1.1.1.7.1.1.1 |
mgmtPortCfgRxTxRateSet the RxTx rate for an ethernet management port.rw Enumeration .1.3.6.1.4.1.8059.1.1.1.1.1.1.7.1.1.2 |
mgmtPortCfgDuplexSet the duplex setting for an ethernet management port.rw Enumeration .1.3.6.1.4.1.8059.1.1.1.1.1.1.7.1.1.3 |
mgmtPortCfgTypeSet the management port type as follows. By setting this port to mgmt(1), it will operate as a non-bridge mode connection. Setting it to uplink(2), this port will operate like an uplink interface module, i.e. a bridge mode connection. Note: this applies to the AuD8000-12 micro DSLAM only.rw Enumeration .1.3.6.1.4.1.8059.1.1.1.1.1.1.7.1.1.4 |