Home/Catalog/NS-OPT-MIB

NS-OPT-MIB

Name: SNMP MIBs and OID Database
Creator: Quadrata FZCO
License: https://opensource.org/licenses/MIT

Detailed view of the defined objects, syntax rules, and hierarchical paths.

Objects

Active

Status

Dependencies

Imported Objects

RFC1155-SMI

RFC-1212

Objects

19 total

Object Name	Syntax	OID
codex OBJECT IDENTIFIER `.1.3.6.1.4.1.449`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.449`
RFC1155-SMI Unknown `.1.3.6.1.4.1.449`	Unknown	`.1.3.6.1.4.1.449`
cdxProductSpecific OBJECT IDENTIFIER `.1.3.6.1.4.1.449.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.449.2`
cdx6500 OBJECT IDENTIFIER `.1.3.6.1.4.1.449.2.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.449.2.1`
cdx6500Configuration OBJECT IDENTIFIER `.1.3.6.1.4.1.449.2.1.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.449.2.1.2`
cdx6500CfgGeneralGroup OBJECT IDENTIFIER `.1.3.6.1.4.1.449.2.1.2.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.449.2.1.2.2`
cdx6500NetServCfgTableThis table contains all the configuration objects for the Network Service Features. SEQUENCE OF Cdx6500NetServCfgTableEntry `.1.3.6.1.4.1.449.2.1.2.2.20`	SEQUENCE OF Cdx6500NetServCfgTableEntry	`.1.3.6.1.4.1.449.2.1.2.2.20`
cdx6500NetServCfgTableEntryParameters in the Network Services Configuration Table. Cdx6500NetServCfgTableEntry `.1.3.6.1.4.1.449.2.1.2.2.20.1`	Cdx6500NetServCfgTableEntry	`.1.3.6.1.4.1.449.2.1.2.2.20.1`
cdx6500NetServCfgEntryNumberThis is not a configurable parameter. This identifies the Network Services Configuration Table entry being configured by the other parameters in the record.ro INTEGER `.1.3.6.1.4.1.449.2.1.2.2.20.1.1`	INTEGER	`.1.3.6.1.4.1.449.2.1.2.2.20.1.1`
cdx6500NetServCfgPortAndStnIdThis parameter identifies the port and station that the Network Services Data Compression feature will be enabled on. The wild card (match anything) character is * and can also be part of the entry. The following are the only valid port types: X25- (Examples: X25-1(16) or X25-1) FRA- (Examples: FRA-3S1 or FRA-3) LCON- (Examples: LCON-1 or LCON-) TCOP- (Examples: TCOP-1 or TCOP-) TBOP- (Examples: TBOP-1 or TBOP-*). NOTE: The hyphen is required and there should be no leading spaces. The range is 0-31 alphanumeric characters, the default value is blank.ro DisplayString `.1.3.6.1.4.1.449.2.1.2.2.20.1.2`	DisplayString	`.1.3.6.1.4.1.449.2.1.2.2.20.1.2`
cdx6500NetServCfgFeaturesLevelThis parameter specifies the Network Services features level. disable - The feature is not requested. negotiate - Negotiate for the feature. The feature is desired, but if not available bring up the virtual circuit anyway, without the feature. required - Required for call. Bring up the connection only if the feature is available on both ends. forceOn - The feature is required for the circuit to come up.ro Enumeration `.1.3.6.1.4.1.449.2.1.2.2.20.1.3`	Enumeration	`.1.3.6.1.4.1.449.2.1.2.2.20.1.3`
cdx6500Statistics OBJECT IDENTIFIER `.1.3.6.1.4.1.449.2.1.3`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.449.2.1.3`
cdx6500StatOtherStatsGroup OBJECT IDENTIFIER `.1.3.6.1.4.1.449.2.1.3.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.449.2.1.3.2`
cdx6500NetServStatTableThe Network Services NS Channel Statistics Table. SEQUENCE OF Cdx6500NetServStatTableEntry `.1.3.6.1.4.1.449.2.1.3.2.11`	SEQUENCE OF Cdx6500NetServStatTableEntry	`.1.3.6.1.4.1.449.2.1.3.2.11`
cdx6500NetServStatTableEntryEach entry in this table pertains to the Network Services (NS) Channel Statistics. Cdx6500NetServStatTableEntry `.1.3.6.1.4.1.449.2.1.3.2.11.1`	Cdx6500NetServStatTableEntry	`.1.3.6.1.4.1.449.2.1.3.2.11.1`
cdx6500NetServStatUsedChannelsThe number of NS Channels in use.ro INTEGER `.1.3.6.1.4.1.449.2.1.3.2.11.1.1`	INTEGER	`.1.3.6.1.4.1.449.2.1.3.2.11.1.1`
cdx6500NetServStatMaxChannelsThe maximum number of NS Channels used.ro INTEGER `.1.3.6.1.4.1.449.2.1.3.2.11.1.2`	INTEGER	`.1.3.6.1.4.1.449.2.1.3.2.11.1.2`
cdx6500NetServStatUnavailChannelsThe number of NS Channels not available for allocation.ro INTEGER `.1.3.6.1.4.1.449.2.1.3.2.11.1.3`	INTEGER	`.1.3.6.1.4.1.449.2.1.3.2.11.1.3`
cdx6500Controls OBJECT IDENTIFIER `.1.3.6.1.4.1.449.2.1.4`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.449.2.1.4`