NORTEL-WLAN-AP-MIB
AI MIB Summary
The NORTEL-WLAN-AP-MIB enables SNMP-based monitoring and configuration of Nortel Wireless LAN Access Points, exposing operational metrics such as radio interface status, client association counts, signal strength, and transmit power levels. This module facilitates the collection of performance data and fault management for Nortel's proprietary 802.11 infrastructure devices.
Nortel Wireless LAN AP MIB
Copyright 2003-2004 Nortel Networks, Inc. All rights reserved. This Nortel Networks SNMP Management Information Base Specification (Specification) embodies Nortel Networks' confidential and proprietary intellectual property. Nortel Networks retains all title and ownership in the Specification, including any revisions.
This Specification is supplied 'AS IS,' and Nortel Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Main OID:
nortelWlanApMib.wlan2200.1
150
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
150 total| Object Name |
|---|
nortelWlanApMibNortel Wireless LAN AP MIB
Copyright 2003-2004 Nortel Networks, Inc.
All rights reserved.
This Nortel Networks SNMP Management Information Base Specification
(Specification) embodies Nortel Networks' confidential and
proprietary intellectual property. Nortel Networks retains all
title and ownership in the Specification, including any
revisions.
This Specification is supplied 'AS IS,' and Nortel Networks makes
no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification. MODULE-IDENTITY .wlan2200.1 |
ntWlanApSys OBJECT IDENTIFIER .wlan2200.1.1 |
ntWlanSwHardwareVerHardware version of the main board.ro DisplayString .wlan2200.1.1.1 |
ntWlanSwBootRomVerBoot ROM code version of the main board.ro DisplayString .wlan2200.1.1.2 |
ntWlanSwOpCodeVerOperation code version of the main board.ro DisplayString .wlan2200.1.1.3 |
ntWlanSwCountryCodeCountry code of the AP.
AL-ALBANIA, DZ-ALGERIA,
AR-ARGENTINA, AM-ARMENIA,
AU-AUSTRALIA, AT-AUSTRIA,
AZ-AZERBAIJAN, BH-BAHRAIN,
BY-BELARUS, BE-BELGIUM,
BZ-BELIZE, BO-BOLVIA,
BR-BRAZIL, BN-BRUNEI_DARUSSALAM,
BG-BULGARIA, CA-CANADA,
CL-CHILE, CN-CHINA,
CO-COLOMBIA, CR-COSTA_RICA,
HR-CROATIA, CY-CYPRUS,
CZ-CZECH_REPUBLIC, DK-DENMARK,
DO-DOMINICAN_REPUBLIC, EC-ECUADOR,
EG-EGYPT, EE-ESTONIA,
FI-FINLAND, FR-FRANCE,
GE-GEORGIA, DE-GERMANY,
GR-GREECE, GT-GUATEMALA,
HK-HONG_KONG, HU-HUNGARY,
IS-ICELAND, IN-INDIA,
ID-INDONESIA, IR-IRAN,
IE-IRELAND, IL-ISRAEL,
IT-ITALY, JP-JAPAN,
JO-JORDAN, KZ-KAZAKHSTAN,
KP-NORTH_KOREA, KR-KOREA_REPUBLIC,
KW-KUWAIT, LV-LATVIA,
LB-LEBANON, LI-LIECHTENSTEIN,
LT-LITHUANIA, LU-LUXEMBOURG,
MO-MACAU, MK-MACEDONIA,
MY-MALAYSIA, MX-MEXICO,
MC-MONACO, MA-MOROCCO,
NL-NETHERLANDS, NZ-NEW_ZEALAND,
NO-NORWAY, OM-OMAN,
PK-PAKISTAN, PA-PANAMA,
PE-PERU, PH-PHILIPPINES,
PL-POLAND, PT-PORTUGAL,
PR-PUERTO_RICO, QA-QATAR,
RO-ROMANIA, RU-RUSSIA,
SA-SAUDI_ARABIA, SG-SINGAPORE,
SK-SLOVAK_REPUBLIC, SI-SLOVENIA,
ZA-SOUTH_AFRICA, ES-SPAIN,
SE-SWEDEN, CH-SWITZERLAND,
SY-SYRIA, TW-TAIWAN,
TH-THAILAND, TR-TURKEY,
UA-UKRAINE, AE-UNITED_ARAB_EMIRATES,
GB-UNITED_KINGDOM, US-UNITED_STATES,
UY-URUGUAY, VE-VENEZUELA,
VN-VIETNAMrw DisplayString .wlan2200.1.1.4 |
ntWlanSwNNDataFileVerNortel Networks Customization Data File Version.ro DisplayString .wlan2200.1.1.5 |
ntWlanApLineMgnt OBJECT IDENTIFIER .wlan2200.1.2 |
ntWlanLineTableTable of descriptive and status information about
configuration of each RS-232 line in this system SEQUENCE OF NtWlanLineEntry .wlan2200.1.2.1 |
ntWlanLineEntryAn entry in the table, containing information
about configuration in one RS232 line of the Access
Point. NtWlanLineEntry .wlan2200.1.2.1.1 |
ntWlanLineIndexThis is defined as RS-232 index. Integer32 .wlan2200.1.2.1.1.1 |
ntWlanLineDataBitsThis is defined as number of data bits for the RS232
interface.ro Integer32 .wlan2200.1.2.1.1.2 |
ntWlanLineParityThis is defined as parity of the RS232 interface.ro Enumeration .wlan2200.1.2.1.1.3 |
ntWlanLineSpeedThis is defined as the speed of the RS-232 interface.ro Integer32 .wlan2200.1.2.1.1.4 |
ntWlanLineStopBitsThis is defined as the number of stop bits for the RS-232
interface.ro Integer32 .wlan2200.1.2.1.1.5 |
ntWlanApPortMgnt OBJECT IDENTIFIER .wlan2200.1.3 |
ntWlanPortTableTable of descriptive and status information about
configuration of each switch port (including expansion
slot) in this system. This table also contains information
about each trunk (similar to Cisco's EtherChannel). SEQUENCE OF NtWlanPortEntry .wlan2200.1.3.1 |
ntWlanPortEntryAn entry in the table, containing information
about configuration in one switch port of the switch. NtWlanPortEntry .wlan2200.1.3.1.1 |
ntWlanPortIndexThis is defined as ifIndex in the IF-MIB. InterfaceIndex (IF-MIB) .wlan2200.1.3.1.1.1 |
ntWlanPortNameIndicates the port name. This is same as
ifAlias in the IF-MIB (RFC2863 or later).ro DisplayString .wlan2200.1.3.1.1.2 |
ntWlanPortTypeIndicates the port type.ro Enumeration .wlan2200.1.3.1.1.3 |
ntWlanPortSpeedDpxCfgSet the port speed and duplex mode as follows:
halfDuplex10(2) - 10Mbps and half duplex mode
fullDuplex10(3) - 10Mbps and full duplex mode
halfDuplex100(4) - 100Mbps and half duplex mode
fullDuplex100(5) - 100Mbps and full duplex mode
halfDuplex1000(6) - 1000Mbps and half duplex mode
fullDuplex1000(7) - 1000Mbps and full duplex mode
hundredBaseTX port can be set as
halfDuplex10(2)
fullDuplex10(3)
halfDuplex100(4)
fullDuplex100(5)
hundredBaseFX port can be set as
halfDuplex100(4)
fullDuplex100(5)
thousandBaseSX port can be set as
halfDuplex1000(6)
fullDuplex1000(7)
The actual operating speed and duplex of the port
is given by portSpeedDpxStatus.ro Enumeration .wlan2200.1.3.1.1.4 |
ntWlanPortFlowCtrlCfg(1) Flow control mechanism is enabled.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in fullDuplex mode, the port
uses IEEE 802.3x flow control mechanism.
If the port type is hundredBaseFX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in fullDuplex mode, Flow
control mechanism will not function.
(2) Flow control mechanism is disabled.
(3) Flow control mechanism is backPressure.
when the port is in fullDuplex mode.This flow control
mechanism will not function.
(4) Flow control mechanism is IEEE 802.3x flow control.
when the port is in halfDuplex mode.This flow control
mechanism will not function.
hundredBaseTX and thousandBaseSX port can be set as:
enabled(1),
disabled(2),
backPressure(3),
dot3xFlowControl(4).
hundredBaseFX port can be set as:
enabled(1),
disabled(2),
backPressure(3).
The actual flow control mechanism is used given by
portFlowCtrlStatus.ro Enumeration .wlan2200.1.3.1.1.5 |
ntWlanPortCapabilitiesPort capabilities.ro Enumeration .wlan2200.1.3.1.1.6 |
ntWlanPortAutonegotiationWhether autonegotiation is enabled.ro Enumeration .wlan2200.1.3.1.1.7 |
ntWlanPortSpeedDpxStatusThe operating speed and duplex mode of the
switched port. If this index is a trunk,
the speed is the speed of its individual members.
If this index is a trunk and the result
is inconsistent among its member ports, this value is
error(1).ro Enumeration .wlan2200.1.3.1.1.8 |
ntWlanPortFlowCtrlStatus(2) BackPressure flow control machanism is used.
(3) IEEE 802.3 flow control machanism is used.
(4) Flow control mechanism is disabled.
If this index is a trunk and the result
is inconsistent among its member ports, this value is
error(1).ro Enumeration .wlan2200.1.3.1.1.9 |
ntWlanApFileTransferMgt OBJECT IDENTIFIER .wlan2200.1.4 |
ntWlanTransferStartSet to go(1) to start a transfer.rw Enumeration .wlan2200.1.4.1 |
ntWlanTransferTypeType of file to transfer.rw Enumeration .wlan2200.1.4.2 |
ntWlanFileTypeType of file to transfer.rw Enumeration .wlan2200.1.4.3 |
ntWlanSrcFileThe source file name for TFTP transfer when a
transfer is next requested via this MIB. This value is set to
the zero length string when no file name has been specified.rw DisplayString .wlan2200.1.4.4 |
ntWlanDestFileThe destination file name for TFTP transfer when a
transfer is next requested via this MIB. This value is set to
the zero length string when no file name has been specified.rw DisplayString .wlan2200.1.4.5 |
ntWlanFileServerThe IP address of the TFTP server for transfer
when a download is next requested via this MIB.
This value is set to `0.0.0.0' when no IP address has been
specified.rw IpAddress .wlan2200.1.4.6 |
ntWlanUserNameThe username specified for an FTP Transfer.rw DisplayString .wlan2200.1.4.7 |
ntWlanPasswordThe password specified for an FTP Transfer.rw DisplayString .wlan2200.1.4.8 |
ntWlanFileTransferStatusThe status of the current FTP Transfer process.ro Enumeration .wlan2200.1.4.9 |
ntWlanApResetMgt OBJECT IDENTIFIER .wlan2200.1.5 |
ntWlanRestartOpCodeFileName of op-code file for start-up.rw DisplayString .wlan2200.1.5.1 |
ntWlanRestartControlSetting this object to warmBoot(2) causes the device to
restart the application software with current configuration
parameters saved in non-volatile memory. Setting this
object to coldBoot(3) causes the device to reinitialize
configuration parameters in non-volatile memory to default
values and restart the application software. When the device
is running normally, this variable has a value of
running(1).rw Enumeration .wlan2200.1.5.2 |
ntWlanApIpMgt OBJECT IDENTIFIER .wlan2200.1.6 |
ntWlanNetConfigIPAddressThe IP address of this Net interface. The default value
for this object is 0.0.0.0. If either the netConfigIPAddress
or netConfigSubnetMask are 0.0.0.0, then when the device
boots, it may use DHCP to try to figure out what these
values should be. If DHCP fails, before the device
can talk on the network, this value must be configured
(e.g., through a terminal attached to the device).rw IpAddress .wlan2200.1.6.1 |
ntWlanNetConfigSubnetMaskThe subnet mask of this Net interface. The default value
for this object is 0.0.0.0. If either the netConfigIPAddress
or netConfigSubnetMask are 0.0.0.0, then when the device
boots, it may use DHCP to try to figure out what these
values should be. If DHCP fails, before the device
can talk on the network, this value must be configured
(e.g., through a terminal attached to the device).rw IpAddress .wlan2200.1.6.2 |
ntWlanNetDefaultGatewayThe IP Address of the default gateway. If this value is
undefined or unknown, it shall have the value 0.0.0.0.rw IpAddress .wlan2200.1.6.3 |
ntWlanIpHttpStateWhether HTTP is enabled.rw Enumeration .wlan2200.1.6.4 |
ntWlanIpHttpPortThe port number for HTTP.rw INTEGER .wlan2200.1.6.5 |
ntWlanApDot11 OBJECT IDENTIFIER .wlan2200.1.7 |
ntWlanDot11Phy OBJECT IDENTIFIER .wlan2200.1.7.4 |
ntWlanDot11PhyOperationTableTable of descriptive and status information about
configuration of each radio of the AP. SEQUENCE OF NtWlanDot11PhyOperationEntry .wlan2200.1.7.4.1 |
ntWlanDot11PhyOperationEntryAn entry in the table, containing information
about configuration in one radio of the AP. NtWlanDot11PhyOperationEntry .wlan2200.1.7.4.1.1 |
ntWlanDot11IndexRadio index of the AP. Integer32 .wlan2200.1.7.4.1.1.1 |
ntWlanDot11TurboModeEnabledThis attribute, when true, shall indicate that the nortel's
propietory turbo mode option is enabled. The default value of
this attribute shall be false.ro Enumeration .wlan2200.1.7.4.1.1.3 |
ntWlanDot11PreambleLengthThis attribute determines whether or not a short or a long
preamble is used to delineate 802.11 frames.rw Enumeration .wlan2200.1.7.4.1.1.4 |
ntWlanDot11dWorldModeEnabledThis attribute determines whether 802.11d world mode is
enabled for this radio.rw TruthValue (SNMPv2-TC) .wlan2200.1.7.4.1.1.5 |
ntWlanDot11ClosedSystemThis attribute determines whether the radio operates as a
closed system. When configured as a closed system, the
SSID is not included when broadcasting periodic beacon
frames.rw TruthValue (SNMPv2-TC) .wlan2200.1.7.4.1.1.6 |
ntWlanDot11AuthenticationEntry OBJECT IDENTIFIER .wlan2200.1.7.5 |
ntWlanDot118021xSupportThis attribute, when true(1), indicates that the Enterprise
Access Point supports the 802.1x authentication algorithm.rw TruthValue (SNMPv2-TC) .wlan2200.1.7.5.1 |
ntWlanDot118021xRequiredThis attribute, when true(1), indicates that the Enterprise
Access Point requires successful 802.1x authentication
for any clients accessing the network.rw TruthValue (SNMPv2-TC) .wlan2200.1.7.5.2 |
ntWlanDot118021xBcastKeyRefreshThe broadcast key refresh rate.rw Integer32 .wlan2200.1.7.5.3 |
ntWlanDot118021xSessKeyRefreshThe session key refresh rate.rw Integer32 .wlan2200.1.7.5.4 |
ntWlanDot118021xReAuthRefreshThe re-authentication refresh rate.rw Integer32 .wlan2200.1.7.5.5 |
ntWlanDot11AuthenticationServerTableTable of descriptive and status information about
configuration of each authentication server. SEQUENCE OF NtWlanDot11AuthenticationServerEntry .wlan2200.1.7.6 |
ntWlanDot11AuthenticationServerEntryAn entry in the table, containing information
about configuration in one radio of the AP. NtWlanDot11AuthenticationServerEntry .wlan2200.1.7.6.1 |
ntWlanDot11ServerIndexRadio index of the AP. Integer32 .wlan2200.1.7.6.1.1 |
ntWlanDot11AuthenticationServerThis values indicates the IP address of the
authentication server.rw IpAddress .wlan2200.1.7.6.1.2 |
ntWlanDot11AuthenticationPortThis values indicates the UDP Port used by the primary
authentication server.rw INTEGER .wlan2200.1.7.6.1.3 |
ntWlanDot11AuthenticationKeyThis values indicates the shared key used by the
authentication server.rw DisplayString .wlan2200.1.7.6.1.4 |
ntWlanDot11AuthenticationRetransmitThis values indicates the retransmit timer length used by the
authentication server.rw INTEGER .wlan2200.1.7.6.1.5 |
ntWlanDot11AuthenticationTimeoutThis values indicates the Timeout value(sec) used by the
authentication server.rw INTEGER .wlan2200.1.7.6.1.6 |
ntWlanDot11SecondaryAuthServerThis values indicates the IP address of the
secondary authentication server.rw IpAddress .wlan2200.1.7.6.1.7 |
ntWlanDot11SecondaryAuthPortThis values indicates the UDP Port used by the primary
secondary authentication server.rw INTEGER .wlan2200.1.7.6.1.8 |
ntWlanDot11SecondaryAuthKeyThis values indicates the shared key used by the
secondary authentication server.rw DisplayString .wlan2200.1.7.6.1.9 |
ntWlanDot11SecondaryAuthRetransmitThis values indicates the retransmit timer length used by the
secondary authentication server.rw INTEGER .wlan2200.1.7.6.1.10 |
ntWlanDot11SecondaryAuthTimeoutThis values indicates the Timeout value(sec) used by the
secondary authentication server.rw INTEGER .wlan2200.1.7.6.1.11 |
ntWlanDot11FilterTableTable of status information about
each configured MAC Address Filtering Entry. SEQUENCE OF NtWlanDot11FilterEntry .wlan2200.1.7.7 |
ntWlanDot11FilterEntryAn entry in the table, containing information
about configuration in one radio of the AP. NtWlanDot11FilterEntry .wlan2200.1.7.7.1 |
ntWlanDot11FilterIndexFilter index. Integer32 .wlan2200.1.7.7.1.1 |
ntWlanDot11FilterAddressThis values indicates the MAC address of the
filter entry.rw PhysAddress (SNMPv2-TC) .wlan2200.1.7.7.1.2 |
ntWlanDot11FilterStatusThis values indicates the Status of the filter entry.
Ifallowed, the client is allowed access to the network.
If disallowed, the no frames will be forwarded to the
network from the client.rw Enumeration .wlan2200.1.7.7.1.3 |
ntWlanDot11TrapTableTable of status information for Association and
Disassociation Trap SEQUENCE OF NtWlanDot11TrapEntry .wlan2200.1.7.9 |
ntWlanDot11TrapEntryAn entry in the table, containing information
for the association and disassociation trap. NtWlanDot11TrapEntry .wlan2200.1.7.9.1 |
ntWlanDot11InterfaceIndexInterface index. Integer32 .wlan2200.1.7.9.1.1 |
ntWlanDot11AssociationStationAddressThis values indicates the MAC address of the Mobile Unit
associating with this Access Point.ro PhysAddress (SNMPv2-TC) .wlan2200.1.7.9.1.2 |
ntWlanDot11DisassociationStationAddressThis values indicates the MAC address of the Mobile Unit
no longer associated with this Access Point.ro PhysAddress (SNMPv2-TC) .wlan2200.1.7.9.1.3 |
ntWlanDot11AssociationMUThis values indicates the number of Mobile Units associated
on the Interfacero INTEGER .wlan2200.1.7.9.1.4 |
ntWlanApTraps OBJECT IDENTIFIER .wlan2200.1.8 |
ntWlanApTraps0 OBJECT IDENTIFIER .wlan2200.1.8.0 |
ntWlanApDot1xAuthenticationFailIndicates that a Mobile Unit failed 802.1x authentication.
- ifPhysAddress is the MAC address of the Access Point
sending this trap message.
- ntWlanDot11AssociationStationAddress is the MAC address
of the Mobile Unit. NOTIFICATION-TYPE .wlan2200.1.8.0.101 |
ntWlanApMuAssocTrapIndicates that there is a Mobile Unit associating
with this Access Point.
- ifPhysAddress is the MAC address of the Access Point
sending this trap message.
- ntWlanDot11AssociationStationAddress is the MAC address of the
Mobile Unit.
Note: If two or more Mobile Units associate with the
Access Point at the same time, ntWlanDot11AssociationStationAddress
belongs to the last Mobile Unit.
- ntWlanDot11AssociationMU is the number of Mobile Units currently
associating with this Access Point. NOTIFICATION-TYPE .wlan2200.1.8.0.111 |
ntWlanApMuDisAssocTrapIndicates that there is one Mobile Unit no longer
associating with this Access Point anymore.
- ifPhysAddress is the MAC address of the Access Point
sending this trap message.
- ntWlanDot11DisassociationStationAddress is the MAC address of the
Mobile Unit.
Note: If two or more Mobile Units un-associate with
the Access Point at the same time,
ntWlanDot11DisassociationStationAddress belongs to the last
Mobile Unit.
- ntWlanDot11AssociationMU is the number of Mobile Units currently
associating with this Access Point. NOTIFICATION-TYPE .wlan2200.1.8.0.112 |
ntWlanApMuWEPAuthFailIndicates that WEP authentication of a Mobile Unit failed.
- ifIndex identifies the radio to which the MU attempted to connect.
- ntWlanDot11AssociationStationAddress is the MAC address of the
Mobile Unit that attempted to connect. NOTIFICATION-TYPE .wlan2200.1.8.0.113 |
ntWlanApMuWPAAuthFailIndicates that WPA authentication of a Mobile Unit failed.
- ifIndex identifies the radio to which the MU attempted to connect.
- ntWlanDot11AssociationStationAddress is the MAC address of the
Mobile Unit that attempted to connect. NOTIFICATION-TYPE .wlan2200.1.8.0.114 |
ntWlanApMuAssocTrapEnabledThis object controls whether ntWlanApMuAssocTrap
notifications will be generated when an MU
associates with the AP. If this object is true(1),
then the notification will be generated. If it is
false, the notification will not be generated.rw TruthValue (SNMPv2-TC) .wlan2200.1.8.1 |
ntWlanApMuDisAssocTrapEnabledThis object controls whether ntWlanApMuDisAssocTrap
notifications will be generated when an MU
disassociates from the AP. If this object is true(1),
then the notification will be generated. If it is
false, the notification will not be generated.rw TruthValue (SNMPv2-TC) .wlan2200.1.8.2 |
ntWlanApLID OBJECT IDENTIFIER .wlan2200.1.9 |
ntWlanApLIDCheckEtherLinkEnabledIndicates whether checks for ethernet link integrity are
enabled.rw TruthValue (SNMPv2-TC) .wlan2200.1.9.1 |
ntWlanApLIDCheckIPLinkEnabledIndicates whether checks for IP link integrity are
enabled.rw TruthValue (SNMPv2-TC) .wlan2200.1.9.2 |
ntWlanApLIDCheckIpLinkAddressThe IP address to ping to check IP link integrity.rw IpAddress .wlan2200.1.9.3 |
ntWlanApRateSupport OBJECT IDENTIFIER .wlan2200.1.10 |
ntWlanApRateSupportTableTable to configure which hardware-supported rates are
actively supported, and which are basic rates required
for an MU to connect to an AP. Entries must exist in
this table for every hardware-supported rate for each
appropriate ifIndex value. SEQUENCE OF NtWlanApRateSupportEntry .wlan2200.1.10.1 |
ntWlanApRateSupportEntryAn entry in the ntWlanApRateSupportTable. NtWlanApRateSupportEntry .wlan2200.1.10.1.1 |
ntWlanApRateSupportIfIndexThe ifIndex value of the radio. InterfaceIndex (IF-MIB) .wlan2200.1.10.1.1.1 |
ntWlanApRateSupportSpeedA supported data rate. NtWlanApDataRate .wlan2200.1.10.1.1.2 |
ntWlanApRateSupportLevelThis object indicates whether a specific rate is currently
supported, and if so, whether it is a basic rate.
off - indicates that this rate is not currently
supported.
supported - indicates that this rate is currently
supported, but is not required to be supported
by an MU in order to connect to this radio.
supportedBasic - indicates that this rate is currently
supported as a basic rate, and an MU must also
support this rate in order to connect to this
radio.rw Enumeration .wlan2200.1.10.1.1.3 |
ntWlanApSecurity OBJECT IDENTIFIER .wlan2200.1.11 |
ntWlanApSecurityTableTable to configure WEP and WPA security parameters.
Entries are per-radio. SEQUENCE OF NtWlanApSecurityEntry .wlan2200.1.11.1 |
ntWlanApSecurityEntryAn entry in the ntWlanApSecurityTable. NtWlanApSecurityEntry .wlan2200.1.11.1.1 |
ntWlanApSecurityIfIndexThe ifIndex value of the radio. InterfaceIndex (IF-MIB) .wlan2200.1.11.1.1.1 |
ntWlanApSecurityEnabledIndicates whether security is enabled for a radio.rw TruthValue (SNMPv2-TC) .wlan2200.1.11.1.1.2 |
ntWlanApSecurityWEPAuthTypeThe WEP authentication type.rw Enumeration .wlan2200.1.11.1.1.3 |
ntWlanApSecurityWEPKeyLengthIndicates the WEP key length being used.rw Enumeration .wlan2200.1.11.1.1.4 |
ntWlanApSecurityWEPActiveKeyIndicates which WEP key is currently in use.rw Integer32 .wlan2200.1.11.1.1.5 |
ntWlanApSecurityWEPKey1The first WEP key. Retrieval of this object will
always return an empty string.rw NtWlanApWEPKey .wlan2200.1.11.1.1.6 |
ntWlanApSecurityWEPKey2The second WEP key. Retrieval of this object will
always return an empty string.rw NtWlanApWEPKey .wlan2200.1.11.1.1.7 |
ntWlanApSecurityWEPKey3The third WEP key. Retrieval of this object will
always return an empty string.rw NtWlanApWEPKey .wlan2200.1.11.1.1.8 |
ntWlanApSecurityWEPKey4The fourth WEP key. Retrieval of this object will
always return an empty string.rw NtWlanApWEPKey .wlan2200.1.11.1.1.9 |
ntWlanApSecurityWPASupportIndicates whether WPA security is supported.rw Enumeration .wlan2200.1.11.1.1.10 |
ntWlanApSecurityWPAModeThe WPA mode.rw Enumeration .wlan2200.1.11.1.1.11 |
ntWlanApSecurityWPAPreSharedKeyThe WPA pre-shared key.rw OCTET STRING .wlan2200.1.11.1.1.12 |
ntWlanApSecurityWPAMcastCypherModeThe multicast cypher mode.rw Enumeration .wlan2200.1.11.1.1.13 |
ntWlanApQoS OBJECT IDENTIFIER .wlan2200.1.12 |
ntWlanApQoSModeThis object indicates the QoS mode being used.
off - indicates QoS features are disabled.
etherSrc - indicates that the ethernet source MAC
address of received packets is mapped to an
egress queue.
etherDst - indicates that the ethernet destination
MAC address of received packets is mapped to an
egress queue.
etherType - indicates that the ethernet type of
of received packets is mapped to an egress
queue.
directPriorityMap - indicates that the priority
value of received packets is used to map directly
to an egress queue.rw Enumeration .wlan2200.1.12.1 |
ntWlanApQoSEtherTypeToQueueTableTable to configure mappings from ethernet type
to queue number. SEQUENCE OF NtWlanApQoSEtherTypeToQueueEntry .wlan2200.1.12.2 |
ntWlanApQoSEtherTypeToQueueEntryAn entry in the ntWlanApQoSTable. NtWlanApQoSEtherTypeToQueueEntry .wlan2200.1.12.2.1 |
ntWlanApQoSEtherTypeToQueueIndexAn ethernet type, to be mapped to a queue. Integer32 .wlan2200.1.12.2.1.1 |
ntWlanApQoSEtherTypeToQueueNumberThe queue number to which the ether type is mapped.rw Integer32 .wlan2200.1.12.2.1.2 |
ntWlanApQoSEtherTypeToQueueRowStatusThis object is used to create and destroy entries in
this table.rw RowStatus (SNMPv2-TC) .wlan2200.1.12.2.1.3 |
ntWlanApQoSMACToQueueTableTable to configure mappings from ethernet MAC address
to queue number. SEQUENCE OF NtWlanApQoSMACToQueueEntry .wlan2200.1.12.3 |
ntWlanApQoSMACToQueueEntryAn entry in the ntWlanApQoSTable. NtWlanApQoSMACToQueueEntry .wlan2200.1.12.3.1 |
ntWlanApQoSMACToQueueAddressAn ethernet MAC address, to be mapped to a queue. MacAddress (SNMPv2-TC) .wlan2200.1.12.3.1.1 |
ntWlanApQoSMACToQueueNumberThe queue number to which the MAC address is mapped.rw Integer32 .wlan2200.1.12.3.1.2 |
ntWlanApQoSMACToQueueRowStatusThis object is used to create and destroy entries in
this table.rw RowStatus (SNMPv2-TC) .wlan2200.1.12.3.1.3 |
ntWlanApVlan OBJECT IDENTIFIER .wlan2200.1.13 |
ntWlanApVlanEnabledThis object indicates whether Vlan support is enabled.rw TruthValue (SNMPv2-TC) .wlan2200.1.13.1 |
ntWlanApVlanTableTable to configure the default VID per-radio. SEQUENCE OF NtWlanApVlanEntry .wlan2200.1.13.2 |
ntWlanApVlanEntryAn entry in the ntWlanApVlanTable. NtWlanApVlanEntry .wlan2200.1.13.2.1 |
ntWlanApVlanIfIndexThe ifIndex value of the radio. InterfaceIndex (IF-MIB) .wlan2200.1.13.2.1.1 |
ntWlanApVlanDefaultVidThe default VID of the radio.rw Integer32 .wlan2200.1.13.2.1.2 |
ntWlanApVlanMUMACToVidTableTable containing mappings from Mobile Unit MAC
addresses to VLAN ID values. SEQUENCE OF NtWlanApVlanMUMACToVidEntry .wlan2200.1.13.3 |
ntWlanApVlanMUMACToVidEntryAn entry in the ntWlanApVlanMUMACToVidTable. NtWlanApVlanMUMACToVidEntry .wlan2200.1.13.3.1 |
ntWlanApVlanMUMACToVidAddressThe ethernet MAC address of a Mobile Unit. MacAddress (SNMPv2-TC) .wlan2200.1.13.3.1.1 |
ntWlanApVlanMUMACToVidNumberThe VID to which this Mobile Unit's MAC is mapped.rw Integer32 .wlan2200.1.13.3.1.2 |
ntWlanApStats OBJECT IDENTIFIER .wlan2200.1.14 |
ntWlanApMUStatsTableTable of per-Mobile Unit statistics. SEQUENCE OF NtWlanApMUStatsEntry .wlan2200.1.14.1 |
ntWlanApMUStatsEntryAn entry in the ntWlanApMUStatsTable. NtWlanApMUStatsEntry .wlan2200.1.14.1.1 |
ntWlanApMUStatsMUAddressThe ethernet MAC address of the Mobile Unit. MacAddress (SNMPv2-TC) .wlan2200.1.14.1.1.1 |
ntWlanApMUStatsPacketsInA count of the packets received from this MU.ro Counter32 .wlan2200.1.14.1.1.2 |
ntWlanApMUStatsPacketsOutA count of the packets sent to this MU.ro Counter32 .wlan2200.1.14.1.1.3 |
ntWlanApMUStatsOctetsInA count of the octets received from this MU.ro Counter32 .wlan2200.1.14.1.1.4 |
ntWlanApMUStatsOctetsOutA count of the octets sent to this MU.ro Counter32 .wlan2200.1.14.1.1.5 |