NOKIA-HWM-MIB
The NOKIA-HWM-MIB module provides SNMP-based access to Nokia hardware management objects, enabling the monitoring of physical device status, component health, and environmental telemetry such as temperature, fan speed, and power supply states.
Imported Objects
Objects
22 total| Object Name |
|---|
ntcHWModuleThe MIB module that is used to control the Hardware Management information. MODULE-IDENTITY .1.3.6.1.4.1.94.1.16.5.1 |
ntcHWObjs OBJECT IDENTIFIER .1.3.6.1.4.1.94.1.16.7.1.1 |
ntcHWUnitTableA table which contains an entry for each pluggable circuit board (in this MIB a 'unit' is the same as a pluggable circuit board.) Entries of this table are automatically created by the hardware management software. SEQUENCE OF NtcHWUnitEntry .1.3.6.1.4.1.94.1.16.7.1.1.1 |
ntcHWUnitEntryA conceptual row in the ntcHWUnitTable. Rows are created automatically by the Hardware Management software. NtcHWUnitEntry .1.3.6.1.4.1.94.1.16.7.1.1.1.1 |
ntcHWAdminStateRepresents the desired state of the unit. inService indicates that the unit is intended to be operating normally. outOfService indicates that the unit should be taken out of normal operating mode and no data traffic should appear in this unit. inTest indicates that the unit should be placed into a selftest mode. missing indicates that the unit is expected to be present but has been detected as not being physically present. The NMS is not allowed to set the value of ntcHWAdminstate to missing.rw Enumeration .1.3.6.1.4.1.94.1.16.7.1.1.1.1.1 |
ntcHWOperStateIndicates the current state of the unit. down indicates that the unit is in a non-functional state. up indicates that the unit is functioning normally.ro Enumeration .1.3.6.1.4.1.94.1.16.7.1.1.1.1.2 |
ntcHWAvailabilityStatusProvides more specific information on the state of the unit in this conceptual row. The status column has eleven defined values: inCharge = the unit is fully operational and ready to perform its desired tasks; applicationStarting = the application software is starting up; applicationShutdown = the application software is shutting down; platformStarting = Basic platform software is starting up; resetting = the disk files are closed and hardware reset is forced; separated = Only basic OS software is running. The unit can start application software on request; unconfigured = The administrative state of the unit is 'missing', disk files are closed and only basic OS software is running. The unit refuses to start application software; testing = Selftests can be performed, only basic OS are running; standby = The unit is redundant and is fully operational but not in charge of operations. It is ready to move to 'inCharge' state when necessary; dormant = All connections are physically inactive to enable removal of the unit without electric disturbance in the backplane. Only watchdog software is running for a short duration of time; unavailable = The unit is not physically present or cannot be contacted.ro Enumeration .1.3.6.1.4.1.94.1.16.7.1.1.1.1.3 |
ntcHWRestartProvides the ability to reset or perform a hot restart the unit represented by this conceptual row. reset = the Unit is shutdown in an orderly manner and restarted again via hardware reset; hotRestart = only the software in a unit is restarted, a hardware reset is not initiated; detach = all electrical connections of the unit are forced to an inactive state to enable removal of the unit without electrical disturbance in the backplane.rw Enumeration .1.3.6.1.4.1.94.1.16.7.1.1.1.1.4 |
ntcHWLedStateIndicates the current LED color of the unit represented by this conceptual row.ro Enumeration .1.3.6.1.4.1.94.1.16.7.1.1.1.1.5 |
ntcHWSerialNumberThe units serial number in displayable format.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.94.1.16.7.1.1.1.1.6 |
ntcHWProductionDateThe units production date in displayable format.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.94.1.16.7.1.1.1.1.7 |
ntcHWUnitEntryChangedRepresents the value of sysUpTime at the instant that this conceptual row entry has changed.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.94.1.16.7.1.1.1.1.8 |
ntcHWSlotTableTable whose entries represent the expected circuit board type. The entries are created automatically by the hardware management software. SEQUENCE OF NtcHWSlotEntry .1.3.6.1.4.1.94.1.16.7.1.1.2 |
ntcHWSlotEntryThe logical row describing the expected circiut board type of a slot. NtcHWSlotEntry .1.3.6.1.4.1.94.1.16.7.1.1.2.1 |
ntcHWDesiredUnitTypeThe unit type which is expected to be inserted or present in the current slot. An indication of the vendor-specific hardware type of the HWM entity. Note that this is different from the definition of MIB-II's sysObjectID. An agent should set this object to a enterprise-specific registration identifier value indicating the specific equipment type in detail. If no vendor-specific registration identifier exists for this entity, or the value is unknown by this agent, then the value { 0 0 } is returned.rw AutonomousType (SNMPv2-TC) .1.3.6.1.4.1.94.1.16.7.1.1.2.1.2 |
ntcHWLastChangedTimeThe value of sysUpTime at the time any of these events occur: * any instance in the following object changes value: - hwmUnitEntryChanged This object shall be set to value 0 in startup.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.94.1.16.7.1.1.3 |
ntcHWLoadInventoryContainerWriting any value to this object will cause the hardware management software to reread its configuration file from disk.rw Integer32 .1.3.6.1.4.1.94.1.16.7.1.1.4 |
ntcHWEvents OBJECT IDENTIFIER .1.3.6.1.4.1.94.1.16.7.1.2.0 |
ntcHWGroups OBJECT IDENTIFIER .1.3.6.1.4.1.94.1.16.8.1.1 |
ntcHWUnitsA collection of objects representing the status of a unit. Unknown .1.3.6.1.4.1.94.1.16.8.1.1.1 |
ntcHWCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.94.1.16.8.1.2 |
ntcHWComplianceThe compliance statement Hardware Management. Unknown .1.3.6.1.4.1.94.1.16.8.1.2.1 |
More MIBs from Nokia
Browse all NokiaMIBs →The TIMETRA-LDP-NG-MIB enables monitoring and configuration of Nokia SR OS (SROS) Label Distribution Protocol Next Generation features, specifically tracking LDP session states, neighbor adjacencies, and label distribution statistics for MPLS traffic engineering.
The TIMETRA-TC-MIB defines proprietary SNMP textual conventions required for the Nokia SROS (Service Router Operating System) to standardize data types for monitoring interface states, traffic counters, and system resource metrics. These definitions serve as the foundational data structures for all TIMETRA-based management applications, ensuring consistent interpretation of telemetry and configuration parameters across Nokia routing platforms.
The TIMETRA-LOG-MIB enables SNMP-based configuration and monitoring of logging utility parameters, event generation rules, and log buffer states on Nokia SR OS (SROS) routers. It facilitates the retrieval of system log severity levels, destination settings, and buffer utilization metrics for centralized network event management.
The TIMETRA-OAM-PM-MIB enables SNMP-based monitoring of Service OAM performance metrics, including packet loss, latency, and jitter counters, on Nokia SR OS (SROS) routers. This proprietary module provides granular visibility into the operational health and quality of service for Layer 2 and Layer 3 Ethernet services.
The TIMETRA-GMPLS-MIB enables SNMP-based provisioning and monitoring of Generalized Multi-Protocol Label Switching (GMPLS) control plane parameters, including label distribution, tunnel signaling states, and resource reservation objects, specifically on Nokia SR OS (formerly TiMOS) routers. This module facilitates the management of GMPLS-specific extensions such as wavelength, fiber, and time-division multiplexing (TDM) link attributes across Nokia's service router hardware.
ALU-MICROWAVE-MIB enables SNMP-based provisioning and monitoring of microwave radio components on Nokia 7xxx series transport devices, specifically tracking link status, signal quality metrics (such as SNR and BER), and interface operational states. This proprietary module facilitates the management of microwave-specific parameters including frequency allocation, modulation schemes, and alarm conditions for point-to-point and point-to-multipoint wireless backhaul links.