NMS-EPON-ONU-SERIAL-PORT
AI MIB Summary
Standard SNMP MIB module defining data structures for NMS-EPON-ONU-SERIAL-PORT.
21
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
21 total| Object Name |
|---|
nmsEponOnuSerialPort OBJECT IDENTIFIER .1.3.6.1.4.1.3320.101.27 |
RFC1155-SMI Unknown .1.3.6.1.4.1.3320.101.27 |
nmsEponOnuSerialPortTableA list of epon ONU serial port table entries. SEQUENCE OF NMSEponOnuSerialPortEntry .1.3.6.1.4.1.3320.101.27.1 |
nmsEponOnuSerialPortEntryA collection of additional objects in the
epon ONU serial port table. NMSEponOnuSerialPortEntry .1.3.6.1.4.1.3320.101.27.1.1 |
llidIfIndexLLID interface id, unique in system. The same value as NMS-EPON-LLID mib index.ro INTEGER .1.3.6.1.4.1.3320.101.27.1.1.1 |
onuSerialPortSeqNoONU serial port sequence number, unique in one ONU.ro INTEGER .1.3.6.1.4.1.3320.101.27.1.1.2 |
onuSerialPortSpeedONU serial port speed. Default value is 9600.rw INTEGER .1.3.6.1.4.1.3320.101.27.1.1.3 |
onuSerialPortDataBitsONU serial port data bits. Default value is 8.rw INTEGER .1.3.6.1.4.1.3320.101.27.1.1.4 |
onuSerialPortHaltBitsONU serial port halt bits. Default value is 1.rw INTEGER .1.3.6.1.4.1.3320.101.27.1.1.5 |
onuSerialPortParityONU serial port parity. Default value is 0-none.rw Enumeration .1.3.6.1.4.1.3320.101.27.1.1.6 |
onuSerialPortFlowControlONU serial port parity. Default value is 0-none.rw Enumeration .1.3.6.1.4.1.3320.101.27.1.1.7 |
onuSerialPortPropRowStatusONU serial port properties row status.These five item are set together: onuSerialPortSpeed, onuSerialPortDataBits, onuSerialPortHaltBits, onuSerialPortParity, onuSerialPortFlowControl.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3320.101.27.1.1.8 |
onuSerialPortDataReadIntervalONU serial port buffer data read interval. Unit is mili-second, and default value is 100 ms.rw INTEGER .1.3.6.1.4.1.3320.101.27.1.1.9 |
onuSerialPortDataReadBytesONU serial port buffer data read bytes. When storage is up to limit, the bytes must be sent out. Default value is 100.rw INTEGER .1.3.6.1.4.1.3320.101.27.1.1.10 |
onuSerialPortBufferRowStatusONU serial port buffer setting row status.These two item are set together: onuSerialPortDataReadInterval, onuSerialPortDataReadBytes.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3320.101.27.1.1.11 |
onuSerialPortKeepaliveModeONU serial port keepalive mode. 0-disable, 1-enable.rw Enumeration .1.3.6.1.4.1.3320.101.27.1.1.12 |
onuSerialPortKeepaliveIdleONU serial port keepalive idle. if there is no r/x package in time of onuSerialPortKeepaliveIdle, system will send keepalive package to probe. Unit is second, and default value is 100 s.rw INTEGER .1.3.6.1.4.1.3320.101.27.1.1.13 |
onuSerialPortKeepaliveTimeoutONU serial port keepalive timeout. if there is no r/x package in time of onuSerialPortKeepaliveIdle, system will send keepalive package to probe. And if there is no rsponse package in onuSerialPortKeepaliveTimeout, this keepalive package is timeout. Unit is second, and default value is 100 s.rw INTEGER .1.3.6.1.4.1.3320.101.27.1.1.14 |
onuSerialPortKeepaliveProbeCountONU serial port keepalive probing package sending count. Default value is 3.rw INTEGER .1.3.6.1.4.1.3320.101.27.1.1.15 |
onuSerialPortKeepaliveRowStatusONU serial port keepalive setting value row status. These three items are set together: onuSerialPortKeepaliveIdle, onuSerialPortKeepaliveTimeout, onuSerialPortKeepaliveProbeCount.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3320.101.27.1.1.16 |
onuSerialPortLoopbackONU serial port loopback test.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.101.27.1.1.17 |