NMS-EPON-OLT-PON
AI MIB Summary
Standard SNMP MIB module defining data structures for NMS-EPON-OLT-PON.
59
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
59 total| Object Name |
|---|
nmsEponOltPon OBJECT IDENTIFIER .1.3.6.1.4.1.3320.101.6 |
RFC1155-SMI Unknown .1.3.6.1.4.1.3320.101.6 |
nmseponoltponTableA list of epon olt pon property table entries. SEQUENCE OF NMSEponOltPonEntry .1.3.6.1.4.1.3320.101.6.1 |
nmsEponOltPonEntryA collection of additional objects in the
epon olt pon property table. NMSEponOltPonEntry .1.3.6.1.4.1.3320.101.6.1.1 |
ponIfIndexThe only diid of PON port in System.ro INTEGER .1.3.6.1.4.1.3320.101.6.1.1.1 |
llidSequenceNoCurrnet LLID seqence number.ro INTEGER .1.3.6.1.4.1.3320.101.6.1.1.2 |
onuAuthMethodONU authentication method.rw Enumeration .1.3.6.1.4.1.3320.101.6.1.1.3 |
isCheckOnuMacCheck ONU MAC when registering.ro Enumeration .1.3.6.1.4.1.3320.101.6.1.1.4 |
isPONBelongtoPSGCheck if PON belongs to PSG.ro Enumeration .1.3.6.1.4.1.3320.101.6.1.1.5 |
pONBelongtoPSGIDPSG ID that PON belongs to.ro INTEGER .1.3.6.1.4.1.3320.101.6.1.1.6 |
isUsingMpcpRegisteAckDelayTimeIf using MPCP registe Ack delay time.rw Enumeration .1.3.6.1.4.1.3320.101.6.1.1.7 |
mpcpRegisteAckDelayTimeMPCP registe Ack delay time,range is 1-50ms.rw INTEGER .1.3.6.1.4.1.3320.101.6.1.1.8 |
ponIfAdminStatusPON interface Administration Status.rw Enumeration .1.3.6.1.4.1.3320.101.6.1.1.9 |
ponIfInFecStatusPON interface in FEC Status.rw Enumeration .1.3.6.1.4.1.3320.101.6.1.1.10 |
ponIfOutFecStatusPON interface out FEC Status.rw Enumeration .1.3.6.1.4.1.3320.101.6.1.1.11 |
ponIfLaserStatusPON interface Laser Status.rw Enumeration .1.3.6.1.4.1.3320.101.6.1.1.12 |
isOnuDataSwitchPON interface data exchange Status with ONU.rw Enumeration .1.3.6.1.4.1.3320.101.6.1.1.13 |
ponIfProtectedStatusPON interface protected Status.rw Enumeration .1.3.6.1.4.1.3320.101.6.1.1.14 |
ponIfDynamicMacLearningStatusPON interface dynamic MAC address learning Status.rw Enumeration .1.3.6.1.4.1.3320.101.6.1.1.15 |
ponIfMacACLPON interface MAC address ACL.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3320.101.6.1.1.16 |
ponIfIpACLPON interface IP address ACL.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3320.101.6.1.1.17 |
fiberProtectHandInHandFiber protect hand in hand. 1-enable,2-disable. Default is disable.rw INTEGER .1.3.6.1.4.1.3320.101.6.1.1.18 |
fiberProtectGroupFiber protect group. The range of groupID is 0-32. 0 means disable. Default is disable.rw INTEGER .1.3.6.1.4.1.3320.101.6.1.1.19 |
splittingRatioFiber splits ratio, for each OLT PON port, which means the max number of ONU.ro INTEGER .1.3.6.1.4.1.3320.101.6.1.1.20 |
activeOnuNumCurrnet active ONU number.ro INTEGER .1.3.6.1.4.1.3320.101.6.1.1.21 |
inactiveOnuNumCurrnet inactive ONU number.ro INTEGER .1.3.6.1.4.1.3320.101.6.1.1.22 |
llidIfindexStringLlid ports ifindex string. Seperated with comma.ro OCTET STRING .1.3.6.1.4.1.3320.101.6.1.1.23 |
ponOpticsParameterAlarmSetTableA list of epon olt pon optics Parameter Alarm set table entries. SEQUENCE OF PonOpticsParameterAlarmSetEntry .1.3.6.1.4.1.3320.101.6.2 |
ponOpticsParameterAlarmSetEntryA collection of additional objects in the epon olt pon optics Parameter Alarm set table. PonOpticsParameterAlarmSetEntry .1.3.6.1.4.1.3320.101.6.2.1 |
ifIndexThe only diid of PON port in System.ro INTEGER .1.3.6.1.4.1.3320.101.6.2.1.1 |
txPowerAlarmUpLimitEnableEnable or disable the alarm of PON hign TX power. 1-enable, 2-disable. Default is disable.rw Enumeration .1.3.6.1.4.1.3320.101.6.2.1.2 |
txPowerAlarmUpLimitThresholdThe upper threshold of tx power alarm. The unit is 0.1DBm. The range is -400-82. Default is 82.rw INTEGER(-400..82) .1.3.6.1.4.1.3320.101.6.2.1.3 |
txPowerAlarmUpLimitClearThresholdThe upper threshold of tx power alarm cleared. The unit is 0.1DBm. The range is -400-82. Default is 82.rw INTEGER(-400..82) .1.3.6.1.4.1.3320.101.6.2.1.4 |
txPowerAlarmLowLimitEnableEnable or disable the alarm of PON low TX power. 1-enable, 2-disable. Default is disable.rw Enumeration .1.3.6.1.4.1.3320.101.6.2.1.5 |
txPowerAlarmLowLimitThresholdThe low threshold of tx power alarm. The unit is 0.1DBm. The range is -400-82. Default is -400.rw INTEGER(-400..82) .1.3.6.1.4.1.3320.101.6.2.1.6 |
txPowerAlarmLowLimitClearThresholdThe low threshold tx power alarm cleared. The unit is 0.1DBm. The range is -400-82. Default is -400.rw INTEGER(-400..82) .1.3.6.1.4.1.3320.101.6.2.1.7 |
temperatureAlarmUpLimitEnableEnable or disable the alarm of PON high temperature. 1-enable, 2-disable. Default is disable.rw Enumeration .1.3.6.1.4.1.3320.101.6.2.1.8 |
temperatureAlarmUpLimitThresholdThe upper threshold of temperature alarm. The unit is 0.1 degree. The range is -1280-1280. Default is 1280.rw INTEGER(-1280..1280) .1.3.6.1.4.1.3320.101.6.2.1.9 |
temperatureAlarmUpLimitClearThresholdThe upper threshold temperature alarm cleared. The unit is 0.1 degree. The range is -1280-1280. Default is 1280.rw INTEGER(-1280..1280) .1.3.6.1.4.1.3320.101.6.2.1.10 |
temperatureAlarmLowLimitEnableEnable or disable the alarm of PON low temperature. 1-enable, 2-disable. Default is disable.rw Enumeration .1.3.6.1.4.1.3320.101.6.2.1.11 |
temperatureAlarmLowLimitThresholdThe low threshold of temperature alarm. The unit is 0.1 degree. The range is -1280-1280. Default is -1280.rw INTEGER(-1280..1280) .1.3.6.1.4.1.3320.101.6.2.1.12 |
temperatureAlarmLowLimitClearThresholdThe low threshold temperature alarm cleared. The unit is 0.1 degree. The range is -1280-1280. Default is -1280.rw INTEGER(-1280..1280) .1.3.6.1.4.1.3320.101.6.2.1.13 |
voltageAlarmUpLimitEnableEnable or disable the alarm of PON high voltage. 1-enable, 2-disable. Default is disable.rw Enumeration .1.3.6.1.4.1.3320.101.6.2.1.14 |
voltageAlarmUpLimitThresholdThe upper threshold of voltage alarm. The unit is 0.1V. The range is 0-65. Default is 65.rw INTEGER .1.3.6.1.4.1.3320.101.6.2.1.15 |
voltageAlarmUpLimitClearThresholdThe upper threshold voltage alarm cleared. The unit is 0.1V. The range is 0-65. Default is 65.rw INTEGER .1.3.6.1.4.1.3320.101.6.2.1.16 |
voltageAlarmLowLimitEnableEnable or disable the alarm of PON low voltage. 1-enable, 2-disable. Default is disable.rw Enumeration .1.3.6.1.4.1.3320.101.6.2.1.17 |
voltageAlarmLowLimitThresholdThe low threshold of voltage alarm. The unit is 0.1V. The range is 0-65. Default is 0.rw INTEGER .1.3.6.1.4.1.3320.101.6.2.1.18 |
voltageAlarmLowLimitClearThresholdThe low threshold voltage alarm cleared. The unit is 0.1V. The range is 0-65. Default is 0.rw INTEGER .1.3.6.1.4.1.3320.101.6.2.1.19 |
currentAlarmUpLimitEnableEnable or disable the alarm of PON high current. 1-enable, 2-disable. Default is disable.rw Enumeration .1.3.6.1.4.1.3320.101.6.2.1.20 |
currentAlarmUpLimitThresholdThe upper threshold of current alarm. The unit is 0.1mA. The range is 0-1310. Default is 1310.rw INTEGER .1.3.6.1.4.1.3320.101.6.2.1.21 |
currentAlarmUpLimitClearThresholdThe upper threshold current alarm cleared. The unit is 0.1mA. The range is 0-1310. Default is 1310.rw INTEGER .1.3.6.1.4.1.3320.101.6.2.1.22 |
currentAlarmLowLimitEnableEnable or disable the alarm of PON hign TX power. 1-enable, 2-disable. Default is disable.rw Enumeration .1.3.6.1.4.1.3320.101.6.2.1.23 |
currentAlarmLowLimitThresholdThe low threshold of current alarm. The unit is 0.1mA. The range is 0-1310. Default is 0.rw INTEGER .1.3.6.1.4.1.3320.101.6.2.1.24 |
currentAlarmLowLimitClearThresholdThe low threshold current alarm cleared. The unit is 0.1mA. The range is 0-1310. Default is 0.rw INTEGER .1.3.6.1.4.1.3320.101.6.2.1.25 |
ponSfpParameterAlarmsNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.3320.101.6.3 |
alarmStatusAlarm status definition. 1-above, 2-below, 3-normal. Enumeration .1.3.6.1.4.1.3320.101.6.3.1 |
ponSfpParameterAlarmsNotificationThe agent generates this trap when olt optical module works in abnormal status or return to normal . NOTIFICATION-TYPE .1.3.6.1.4.1.3320.101.6.3.2 |
ponPortMigration OBJECT IDENTIFIER .1.3.6.1.4.1.3320.101.6.4 |
ponPortMigLlidSetLlid ports ifindex string. Seperated with semicolon. For example, if we migrate the PON port configuration from port EPON3/1(llid:25) to
port EPON3/2(llid:26), this value should be set to '25;26'.rw OCTET STRING .1.3.6.1.4.1.3320.101.6.4.1 |