NETTRACK-E3METER-CTR-SNMP-MIB
AI MIB Summary
The NETTRACK-E3METER-CTR-SNMP-MIB module provides SNMP access to traffic counters and performance metrics for E3METER suite network monitoring appliances, specifically tracking interface throughput, packet counts, and error statistics for E3 (34 Mbps) and T3 (45 Mbps) digital transmission links.
Management Information for the E3METER suite.
Main OID:
e3Mib.1.3.6.1.4.1.21695.1.10
149
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
149 total| Object Name |
|---|
nettrack OBJECT IDENTIFIER .1.3.6.1.4.1.21695 |
SNMPv2-TC NOTIFICATION-TYPE .1.3.6.1.4.1.21695 |
public OBJECT IDENTIFIER .1.3.6.1.4.1.21695.1 |
e3MibManagement Information for the E3METER suite. MODULE-IDENTITY .1.3.6.1.4.1.21695.1.10 |
e3Concentrator OBJECT IDENTIFIER .1.3.6.1.4.1.21695.1.10.1 |
e3ConcentratorFWVersionCTR firmware version.ro OCTET STRING .1.3.6.1.4.1.21695.1.10.1.1 |
e3ConcentratorUptimeThe system uptime in hundredths of a second.rodeprecated TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.21695.1.10.1.2 |
e3ConcentratorSystemTimeThe current system time represented in seconds since 1970-01-01
00:00:00 UTC.ro Unsigned32 .1.3.6.1.4.1.21695.1.10.1.3 |
e3IpsNetwork OBJECT IDENTIFIER .1.3.6.1.4.1.21695.1.10.2 |
e3IpsTotalNodesNumber of configured nodes in total.ro Integer32 .1.3.6.1.4.1.21695.1.10.2.1 |
e3IpsUnknownNodesNumber of unknown nodes.
This object is deprecated, it will return 0.rodeprecated Integer32 .1.3.6.1.4.1.21695.1.10.2.2 |
e3IpsActiveNodesNumber of active nodes.
This object is deprecated, use e3IpsPolledNodesSuccess instead.rodeprecated Integer32 .1.3.6.1.4.1.21695.1.10.2.3 |
e3IpsDeadNodesNumber of dead (unreachable) nodes.
This object is deprecated, it will return 0.rodeprecated Integer32 .1.3.6.1.4.1.21695.1.10.2.4 |
e3IpsPolledPeriodStartStart of the most recent polling period in seconds since
1970-01-01 00:00:00 UTC.ro Unsigned32 .1.3.6.1.4.1.21695.1.10.2.5 |
e3IpsPolledPeriodDurationDuration of the data period in seconds.ro Unsigned32 .1.3.6.1.4.1.21695.1.10.2.6 |
e3IpsPolledNodesSuccessThe number of nodes for which data was available for the most
reccently polled period.ro Integer32 .1.3.6.1.4.1.21695.1.10.2.7 |
e3IpsTableThe e3IpsTable holds information about all IPS nodes in the
network. SEQUENCE OF E3IpsEntry .1.3.6.1.4.1.21695.1.10.3 |
e3IpsEntryHolds information about one particular IPS. E3IpsEntry .1.3.6.1.4.1.21695.1.10.3.1 |
e3IpsSerialThe serial number is the primary identification for
for every IPS.ro Integer32 .1.3.6.1.4.1.21695.1.10.3.1.1 |
e3IpsCtrSerialThe serial number of the concentrator this IPS is
connected to.ro Integer32 .1.3.6.1.4.1.21695.1.10.3.1.2 |
e3IpsModelModel number.ro Integer32 .1.3.6.1.4.1.21695.1.10.3.1.3 |
e3IpsHWVersionHardware revision.ro Enumeration .1.3.6.1.4.1.21695.1.10.3.1.4 |
e3IpsFWVersionInteger representation of the firmware revision
(major.minor) represented as a 16 bit integer.ro Integer32 .1.3.6.1.4.1.21695.1.10.3.1.5 |
e3IpsPLCVersionPLC firmware revision (major.minor.build) represented
as a 24 bit integer.ro Integer32 .1.3.6.1.4.1.21695.1.10.3.1.6 |
e3IpsPLCBandHolds the PLC band used by the corresponding node.ro Enumeration .1.3.6.1.4.1.21695.1.10.3.1.7 |
e3IpsLabelIPS label shown on display.ro OCTET STRING .1.3.6.1.4.1.21695.1.10.3.1.8 |
e3IpsStateState of this node.ro Enumeration .1.3.6.1.4.1.21695.1.10.3.1.9 |
e3IpsMetersNumber of power meters in this IPS.ro INTEGER .1.3.6.1.4.1.21695.1.10.3.1.10 |
e3IpsSensorsNumber of sensors connected to this IPS.ro INTEGER .1.3.6.1.4.1.21695.1.10.3.1.11 |
e3IpsChannelConfigChannel configuration.ro Enumeration .1.3.6.1.4.1.21695.1.10.3.1.12 |
e3IpsBuildIPS firmware build number.ro OCTET STRING .1.3.6.1.4.1.21695.1.10.3.1.14 |
e3IpsRcmType of installed residual current monitoring: none (0)
or total (1), where the total residual current of all phases
is monitored.ro Enumeration .1.3.6.1.4.1.21695.1.10.3.1.15 |
e3IpsMeterTableThe e3IpsMeterTable holds information related to the
powermeters of all IPS nodes. SEQUENCE OF E3IpsMeterEntry .1.3.6.1.4.1.21695.1.10.4 |
e3IpsMeterEntryHolds the information related to one specific powermeter. E3IpsMeterEntry .1.3.6.1.4.1.21695.1.10.4.1 |
e3IpsMeterIndex of this power meter in the current node.ro Integer32 .1.3.6.1.4.1.21695.1.10.4.1.2 |
e3IpsEnergyPActive energy in watt hours.
This object is deprecated, use the e3IpsActiveEnergy object instead.rodeprecated WattHours UNITS "Wh" .1.3.6.1.4.1.21695.1.10.4.1.3 |
e3IpsPowerPActive power at a given instant.
This object is deprecated, use the e3IpsPAvg object instead.rodeprecated Watts UNITS "W" .1.3.6.1.4.1.21695.1.10.4.1.6 |
e3IpsPowerQReactive power at a given instant.
This object is deprecated, use the e3IpsQAvg object instead.rodeprecated VoltAmpereReactives UNITS "var" .1.3.6.1.4.1.21695.1.10.4.1.7 |
e3IpsPowerSApparent power at a given instant.
This object is deprecated, use the e3IpsQAvg object instead.rodeprecated VoltAmperes UNITS "VA" .1.3.6.1.4.1.21695.1.10.4.1.8 |
e3IpsUrmsRMS voltage at a given instant.
This object is deprecated, use the e3IpsUrmsAvg object instead.rodeprecated MilliVolts UNITS "mV" .1.3.6.1.4.1.21695.1.10.4.1.9 |
e3IpsIrmsRMS current at a given instant.
This object is deprecated, use the e3IpsIrmsAvg object instead.rodeprecated MilliAmperes UNITS "mA" .1.3.6.1.4.1.21695.1.10.4.1.10 |
e3IpsFrequencyFrequency measured a given instant.
This object is deprecated, use e3IpsFreqMin/Max instead.rodeprecated MilliHertz UNITS "mHz" .1.3.6.1.4.1.21695.1.10.4.1.11 |
e3IpsPeriodTypeSpecifies whether the data is truly aggregated over
the indicated period or if it represents just a sample
during the indicated period (for old firmware
versions).ro Enumeration .1.3.6.1.4.1.21695.1.10.4.1.12 |
e3IpsPeriodStartStart of the data period which is represented by the
values in the MIB. This is given in seconds since
1970-01-01 00:00:00 UTC. If this is 0, no data has
been received from this node yet.ro Unsigned32 .1.3.6.1.4.1.21695.1.10.4.1.13 |
e3IpsPeriodDurationDuration of the data period in seconds.ro Unsigned32 .1.3.6.1.4.1.21695.1.10.4.1.14 |
e3IpsDataStatusInforms about the nature of the data in this table
entry: 0 (unknown) means no data has yet been received
from this node, 1 (current-data) means that the data
is from the most recently polled period, 2 (old-data)
means the data is from a previous period.ro Enumeration .1.3.6.1.4.1.21695.1.10.4.1.15 |
e3IpsPMinMin active power measured during the indicated
period.ro Watts UNITS "W" .1.3.6.1.4.1.21695.1.10.4.1.16 |
e3IpsPMaxMax active power measured during the indicated
period.ro Watts UNITS "W" .1.3.6.1.4.1.21695.1.10.4.1.17 |
e3IpsPAvgAvg active power measured during the indicated
period.ro Watts UNITS "W" .1.3.6.1.4.1.21695.1.10.4.1.18 |
e3IpsQMinMin reactive power measured during the indicated
period.ro VoltAmpereReactives UNITS "var" .1.3.6.1.4.1.21695.1.10.4.1.19 |
e3IpsQMaxMax reactive power measured during the indicated
period.ro VoltAmpereReactives UNITS "var" .1.3.6.1.4.1.21695.1.10.4.1.20 |
e3IpsQAvgAvg reactive power measured during the indicated
period.ro VoltAmpereReactives UNITS "var" .1.3.6.1.4.1.21695.1.10.4.1.21 |
e3IpsSAvgAvg apparent power measured during the indicated
period.ro VoltAmperes UNITS "VA" .1.3.6.1.4.1.21695.1.10.4.1.22 |
e3IpsUrmsMinMin RMS voltage measured during the indicated
period.ro MilliVolts UNITS "mV" .1.3.6.1.4.1.21695.1.10.4.1.23 |
e3IpsUrmsMaxMax RMS voltage measured during the indicated
period.ro MilliVolts UNITS "mV" .1.3.6.1.4.1.21695.1.10.4.1.24 |
e3IpsUrmsAvgAvg RMS voltage measured during the indicated
period.ro MilliVolts UNITS "mV" .1.3.6.1.4.1.21695.1.10.4.1.25 |
e3IpsIrmsMinMin RMS current measured during the indicated
period.ro MilliAmperes UNITS "mA" .1.3.6.1.4.1.21695.1.10.4.1.26 |
e3IpsIrmsMaxMax RMS current measured during the indicated
period.ro MilliAmperes UNITS "mA" .1.3.6.1.4.1.21695.1.10.4.1.27 |
e3IpsIrmsAvgAvg RMS current measured during the indicated
period.ro MilliAmperes UNITS "mA" .1.3.6.1.4.1.21695.1.10.4.1.28 |
e3IpsFreqMinMin frequency measured during the indicated period.ro MilliHertz UNITS "mHz" .1.3.6.1.4.1.21695.1.10.4.1.29 |
e3IpsFreqMaxMax frequency measured during the indicated period.ro MilliHertz UNITS "mHz" .1.3.6.1.4.1.21695.1.10.4.1.30 |
e3IpsPFAvgAvg power factor * 100 measured during the indicated
period.ro INTEGER .1.3.6.1.4.1.21695.1.10.4.1.31 |
e3IpsActiveEnergyActive energy at the end of the indicated period.ro WattHours UNITS "Wh" .1.3.6.1.4.1.21695.1.10.4.1.32 |
e3IpsReactiveEnergyLReactive inductive energy at the end of the indicated
period.ro VoltAmpereReactiveHours UNITS "varh" .1.3.6.1.4.1.21695.1.10.4.1.33 |
e3IpsReactiveEnergyCReactive capacitive energy at the end of the
indicated period.ro VoltAmpereReactiveHours UNITS "varh" .1.3.6.1.4.1.21695.1.10.4.1.34 |
e3IpsSensorTableThe sensor table holds all the sensors of this E3METER
concentrator. SEQUENCE OF E3IpsSensorEntry .1.3.6.1.4.1.21695.1.10.5 |
e3IpsSensorEntryAn entry containing all data related to a sensor. E3IpsSensorEntry .1.3.6.1.4.1.21695.1.10.5.1 |
e3IpsSensorPortSensor port number. Zero denotes the built-in sensor.ro Integer32 .1.3.6.1.4.1.21695.1.10.5.1.2 |
e3IpsSensorTypeSensor type.ro Enumeration .1.3.6.1.4.1.21695.1.10.5.1.3 |
e3IpsSensorTemperatureCelsiusTemperature in tenth degrees measured at a given instant.rodeprecated DeciDegreesCelsius UNITS "deg-C/10" .1.3.6.1.4.1.21695.1.10.5.1.4 |
e3IpsSensorHumidityHumidity measured at a given instant.rodeprecated Percent UNITS "%" .1.3.6.1.4.1.21695.1.10.5.1.5 |
e3IpsSensorPeriodTypeSpecifies whether the data is truly aggregated over
the indicated period or if it represents just a sample
during the indicated period (for old firmware
versions).ro Enumeration .1.3.6.1.4.1.21695.1.10.5.1.6 |
e3IpsSensorPeriodStartStart of the data period which is represented by the
values in the MIB. This is given in seconds since the
1970-01-01 00:00:00 UTC. If this is 0, no data was
received from this node yet.ro Unsigned32 .1.3.6.1.4.1.21695.1.10.5.1.7 |
e3IpsSensorPeriodDurationDuration of the data period in seconds.ro Unsigned32 .1.3.6.1.4.1.21695.1.10.5.1.8 |
e3IpsSensorDataStatusInforms about the nature of the data in this table
entry: 0 (unknown) means no data has yet been received
from this node, 1 (current-data) means that the data
is from the most recently polled period, 2 (old-data)
means the data is from a previous period.ro Enumeration .1.3.6.1.4.1.21695.1.10.5.1.9 |
e3IpsSensorTempCMinMin temperature in celsius measured during the
indicated period.ro DeciDegreesCelsius UNITS "deg-C/10" .1.3.6.1.4.1.21695.1.10.5.1.10 |
e3IpsSensorTempCMaxMax temperature in celsius measured during the
indicated period.ro DeciDegreesCelsius UNITS "deg-C/10" .1.3.6.1.4.1.21695.1.10.5.1.11 |
e3IpsSensorRHMinMin relative humidity measured during the indicated
period.ro Percent UNITS "%" .1.3.6.1.4.1.21695.1.10.5.1.12 |
e3IpsSensorRHMaxMax relative humidity measured during the indicated
period.ro Percent UNITS "%" .1.3.6.1.4.1.21695.1.10.5.1.13 |
e3ConcentratorTrapObjects OBJECT IDENTIFIER .1.3.6.1.4.1.21695.1.10.9 |
e3CtrEventTimeThe time at which the event occurred represented in seconds since
1970-01-01 00:00:00 UTC.ro Integer32 .1.3.6.1.4.1.21695.1.10.9.1 |
e3CtrEventSeverityLevelThe severity level of the event.ro Enumeration .1.3.6.1.4.1.21695.1.10.9.2 |
e3CtrEventSourceType and serial number of the device which caused the event.ro OCTET STRING .1.3.6.1.4.1.21695.1.10.9.3 |
e3CtrEventDescriptionDescription of the event.ro OCTET STRING .1.3.6.1.4.1.21695.1.10.9.4 |
e3ConcentratorTraps OBJECT IDENTIFIER .1.3.6.1.4.1.21695.1.10.10 |
e3ConcentratorEventLogEvent detected by the Data Concentrator in a 'log' format.
Fields are delimited by the ';' character. NOTIFICATION-TYPE .1.3.6.1.4.1.21695.1.10.10.1 |
e3IpsRcmTableThe sensor table holds the residual current monitoring data
of this E3METER concentrator. SEQUENCE OF E3IpsRcmEntry .1.3.6.1.4.1.21695.1.10.11 |
e3IpsRcmEntryAn entry containing all data related to an rcm measuring point. E3IpsRcmEntry .1.3.6.1.4.1.21695.1.10.11.1 |
e3IpsRcmPeriodStartStart of the data period which is represented by the
values in the MIB. This is given in seconds since
1970-01-01 00:00:00 UTC. If this is 0, no data has
been received from this node yet.ro Unsigned32 .1.3.6.1.4.1.21695.1.10.11.1.2 |
e3IpsRcmPeriodDurationDuration of the data period in seconds.ro Unsigned32 .1.3.6.1.4.1.21695.1.10.11.1.3 |
e3IpsRcmDataStatusInforms about the nature of the data in this table
entry: 0 (unknown) means no data has yet been received
from this node, 1 (current-data) means that the data
is from the most recently polled period, 2 (old-data)
means the data is from a previous period.ro Enumeration .1.3.6.1.4.1.21695.1.10.11.1.4 |
e3IpsRcmAcMinMin AC residual current measured during the indicated
periodro MilliAmperes UNITS "mA" .1.3.6.1.4.1.21695.1.10.11.1.5 |
e3IpsRcmAcMaxMax AC residual current measured during the indicated
periodro MilliAmperes UNITS "mA" .1.3.6.1.4.1.21695.1.10.11.1.6 |
e3IpsRcmAcAvgAvg AC residual current measured during the indicated
periodro MilliAmperes UNITS "mA" .1.3.6.1.4.1.21695.1.10.11.1.7 |
e3IpsRcmDcMinMin DC residual current measured during the indicated
periodro MilliAmperes UNITS "mA" .1.3.6.1.4.1.21695.1.10.11.1.8 |
e3IpsRcmDcMaxMax DC residual current measured during the indicated
periodro MilliAmperes UNITS "mA" .1.3.6.1.4.1.21695.1.10.11.1.9 |
e3IpsRcmDcAvgAvg DC residual current measured during the indicated
periodro MilliAmperes UNITS "mA" .1.3.6.1.4.1.21695.1.10.11.1.10 |
e3MeterConfigTableThe e3MeterConfigTable holds information about all meters. SEQUENCE OF E3MeterConfigEntry .1.3.6.1.4.1.21695.1.10.12 |
e3MeterConfigEntryHolds the information related to one specific meter. E3MeterConfigEntry .1.3.6.1.4.1.21695.1.10.12.1 |
e3MeterIndexIndex of the meter on this CTR. The index is maintained
across CTR reboots and changes only if a meter is deleted
and added again.ro Integer32 .1.3.6.1.4.1.21695.1.10.12.1.1 |
e3MeterUIDUnique ID of the meter on this CTR.ro OCTET STRING .1.3.6.1.4.1.21695.1.10.12.1.2 |
e3MeterTypeMeter type.ro Enumeration .1.3.6.1.4.1.21695.1.10.12.1.3 |
e3MeterVersionHardware & software versions.ro OCTET STRING .1.3.6.1.4.1.21695.1.10.12.1.4 |
e3MeterLabelDevice label.ro OCTET STRING .1.3.6.1.4.1.21695.1.10.12.1.5 |
e3MeterSerialSerial number of a meter.ro OCTET STRING .1.3.6.1.4.1.21695.1.10.12.1.6 |
e3MeterModelMeter model.ro OCTET STRING .1.3.6.1.4.1.21695.1.10.12.1.7 |
e3MeterChannelConfigChannel configuration of this meter. This defines the
number of channels of a meter and the nature of the
individual meters in e3MeterTable:
- 1L: 1 live wire channel
- 3L1N: 3 live wires, 1 neutral wire (4 channels total)
- 3L: 3 live wiresro Enumeration .1.3.6.1.4.1.21695.1.10.12.1.8 |
e3MeterNumSensorsNumber of sensors of this meter in e3MeterSensorTablero Integer32 .1.3.6.1.4.1.21695.1.10.12.1.9 |
e3MeterDataTableThis table holds the metering data of all meters. SEQUENCE OF E3MeterDataEntry .1.3.6.1.4.1.21695.1.10.13 |
e3MeterDataEntryAn entry containing all measurement data related a meter. E3MeterDataEntry .1.3.6.1.4.1.21695.1.10.13.1 |
e3MeterDataMeterIndexCorresponds to the e3MeterIndex entry in e3MeterConfig table.ro Integer32 .1.3.6.1.4.1.21695.1.10.13.1.1 |
e3MeterDataChannelChannel number.ro Integer32 .1.3.6.1.4.1.21695.1.10.13.1.2 |
e3MeterDataPeriodTypeSpecifies whether the data is truly aggregated over
the indicated period or if it represents just a sample
during the indicated period (for old firmware
versions).ro Enumeration .1.3.6.1.4.1.21695.1.10.13.1.3 |
e3MeterDataPeriodStartStart of the data period which is represented by the
values in the MIB. This is given in seconds since
1970-01-01 00:00:00 UTC. If this is 0, no data has
been received from this meter yet.ro Unsigned32 .1.3.6.1.4.1.21695.1.10.13.1.4 |
e3MeterDataPeriodDurationDuration of the data period in seconds.ro Unsigned32 .1.3.6.1.4.1.21695.1.10.13.1.5 |
e3MeterDataStatusInforms about the nature of the data in this table
entry: 0 (unknown) means no data has yet been received
from this meter, 1 (current-data) means that the data
is from the most recently polled period, 2 (old-data)
means the data is from a previous period.ro Enumeration .1.3.6.1.4.1.21695.1.10.13.1.6 |
e3MeterDataPMinMin active power measured during the indicated
period.ro Watts UNITS "W" .1.3.6.1.4.1.21695.1.10.13.1.7 |
e3MeterDataPMaxMax active power measured during the indicated
period.ro Watts UNITS "W" .1.3.6.1.4.1.21695.1.10.13.1.8 |
e3MeterDataPAvgAvg active power measured during the indicated
period.ro Watts UNITS "W" .1.3.6.1.4.1.21695.1.10.13.1.9 |
e3MeterDataQMinMin reactive power measured during the indicated
period.ro VoltAmpereReactives UNITS "var" .1.3.6.1.4.1.21695.1.10.13.1.10 |
e3MeterDataQMaxMax reactive power measured during the indicated
period.ro VoltAmpereReactives UNITS "var" .1.3.6.1.4.1.21695.1.10.13.1.11 |
e3MeterDataQAvgAvg reactive power measured during the indicated
period.ro VoltAmpereReactives UNITS "var" .1.3.6.1.4.1.21695.1.10.13.1.12 |
e3MeterDataSAvgAvg apparent power measured during the indicated
period.ro VoltAmperes UNITS "VA" .1.3.6.1.4.1.21695.1.10.13.1.13 |
e3MeterDataUrmsMinMin RMS voltage measured during the indicated
period.ro MilliVolts UNITS "mV" .1.3.6.1.4.1.21695.1.10.13.1.14 |
e3MeterDataUrmsMaxMax RMS voltage measured during the indicated
period.ro MilliVolts UNITS "mV" .1.3.6.1.4.1.21695.1.10.13.1.15 |
e3MeterDataUrmsAvgAvg RMS voltage measured during the indicated
period.ro MilliVolts UNITS "mV" .1.3.6.1.4.1.21695.1.10.13.1.16 |
e3MeterDataIrmsMinMin RMS current measured during the indicated
period.ro MilliAmperes UNITS "mA" .1.3.6.1.4.1.21695.1.10.13.1.17 |
e3MeterDataIrmsMaxMax RMS current measured during the indicated
period.ro MilliAmperes UNITS "mA" .1.3.6.1.4.1.21695.1.10.13.1.18 |
e3MeterDataIrmsAvgAvg RMS current measured during the indicated
period.ro MilliAmperes UNITS "mA" .1.3.6.1.4.1.21695.1.10.13.1.19 |
e3MeterDataFreqMinMin frequency measured during the indicated period.ro MilliHertz UNITS "mHz" .1.3.6.1.4.1.21695.1.10.13.1.20 |
e3MeterDataFreqMaxMax frequency measured during the indicated period.ro MilliHertz UNITS "mHz" .1.3.6.1.4.1.21695.1.10.13.1.21 |
e3MeterDataPFAvgAvg power factor * 100 measured during the indicated
period.ro INTEGER .1.3.6.1.4.1.21695.1.10.13.1.22 |
e3MeterDataActiveEnergyActive energy at the end of the indicated period.ro WattHours UNITS "Wh" .1.3.6.1.4.1.21695.1.10.13.1.23 |
e3MeterDataReactiveEnergyLReactive inductive energy at the end of the indicated
period.ro VoltAmpereReactiveHours UNITS "varh" .1.3.6.1.4.1.21695.1.10.13.1.24 |
e3MeterDataReactiveEnergyCReactive capacitive energy at the end of the
indicated period.ro VoltAmpereReactiveHours UNITS "varh" .1.3.6.1.4.1.21695.1.10.13.1.25 |
e3MeterSensorTableThis table holds the sensor data of all meters. SEQUENCE OF E3MeterSensorEntry .1.3.6.1.4.1.21695.1.10.14 |
e3MeterSensorEntryAn entry containing each meter's sensor data. E3MeterSensorEntry .1.3.6.1.4.1.21695.1.10.14.1 |
e3MeterSensorMeterIndexCorresponds to the e3MeterIndex entry in e3MeterConfig table.ro Integer32 .1.3.6.1.4.1.21695.1.10.14.1.1 |
e3MeterSensorIndexSensor index.ro Integer32 .1.3.6.1.4.1.21695.1.10.14.1.2 |
e3MeterSensorPeriodTypeSpecifies whether the data is truly aggregated over
the indicated period or if it represents just a sample
during the indicated period (for old firmware
versions).ro Enumeration .1.3.6.1.4.1.21695.1.10.14.1.3 |
e3MeterSensorPeriodStartStart of the data period which is represented by the
values in the MIB. This is given in seconds since
1970-01-01 00:00:00 UTC. If this is 0, no data has
been received from this meter yet.ro Unsigned32 .1.3.6.1.4.1.21695.1.10.14.1.4 |
e3MeterSensorPeriodDurationDuration of the data period in seconds.ro Unsigned32 .1.3.6.1.4.1.21695.1.10.14.1.5 |
e3MeterSensorStatusInforms about the nature of the data in this table
entry: 0 (unknown) means no data has yet been received
from this meter, 1 (current-data) means that the data
is from the most recently polled period, 2 (old-data)
means the data is from a previous period.ro Enumeration .1.3.6.1.4.1.21695.1.10.14.1.6 |
e3MeterSensorDescriptionTextual description of the sensor.ro OCTET STRING .1.3.6.1.4.1.21695.1.10.14.1.7 |
e3MeterSensorTypeSensor type.ro Enumeration .1.3.6.1.4.1.21695.1.10.14.1.8 |
e3MeterSensorTempCMinMin temperature in celsius measured during the
indicated period.ro DeciDegreesCelsius UNITS "deg-C/10" .1.3.6.1.4.1.21695.1.10.14.1.9 |
e3MeterSensorTempCMaxMax temperature in celsius measured during the
indicated period.ro DeciDegreesCelsius UNITS "deg-C/10" .1.3.6.1.4.1.21695.1.10.14.1.10 |
e3MeterSensorRHMinMin relative humidity measured during the indicated
period.ro Percent UNITS "%" .1.3.6.1.4.1.21695.1.10.14.1.11 |
e3MeterSensorRHMaxMax relative humidity measured during the indicated
period.ro Percent UNITS "%" .1.3.6.1.4.1.21695.1.10.14.1.12 |