NETI-PM-MIB
The Net Insight PM (Performance Monitoring) MIB. The MIB implements objects for monitoring the performance of trunk interfaces, access interfaces and channels according to G.826.
Main OID:
netiPMMIB.1.3.6.1.4.1.2928.6.2.17
186
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
186 total| Object Name |
|---|
netiPMMIBThe Net Insight PM (Performance Monitoring) MIB. The MIB implements objects for monitoring the performance of trunk interfaces, access interfaces and channels according to G.826. MODULE-IDENTITY .1.3.6.1.4.1.2928.6.2.17 |
netiPMMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2928.6.2.17.1 |
pmTifGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2928.6.2.17.1.1 |
pmTifTableTable of Performance Monitored trunk interfaces SEQUENCE OF PmTifEntry .1.3.6.1.4.1.2928.6.2.17.1.1.1 |
pmTifEntryOne entry for each trunk interface PmTifEntry .1.3.6.1.4.1.2928.6.2.17.1.1.1.1 |
pmTifIndexThe index uniquely identifying this trunk interface. Unsigned32 .1.3.6.1.4.1.2928.6.2.17.1.1.1.1.1 |
pmTifAdminStatusThe desired state of the PM function. Affects the operative state of the PM objectrw Enumeration .1.3.6.1.4.1.2928.6.2.17.1.1.1.1.2 |
pmTifOperStatusPM operative state.ro Enumeration .1.3.6.1.4.1.2928.6.2.17.1.1.1.1.3 |
pmTifFailureShows current failure state. An empty string indicates no failurero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.1.1.1.4 |
pmTifDataSourceThe PM Data Source objectro OBJECT IDENTIFIER .1.3.6.1.4.1.2928.6.2.17.1.1.1.1.5 |
pmTifDataSourceNameThe name of the PM Data Sourcero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.1.1.1.6 |
pmTifUatAlarmsEnabledIf set to `true(1)' then UAT alarms will be sent. Unavailable time (UAT) defines a state where a service is unable to perform its normal task due to severe errors for a longer period. It begins at detection of ten consecutive SES events and ends at detection of ten consecutive non-SES events. In both cases, the 10s are considered part of unavailable respective available time and effects the visibility of G.826 PM events (they are delayed 10s) Entry and exit of UAT is declared by raising and clearing an UAT alarm (if enabled)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.1.1.1.7 |
pmTifTresholdAlarmsEnabledIf set to `true(1)' then threshold alarms will be sent. Each 15m and 24h current register counter can be assigned a threshold value. When crossed, a threshold crossing alarm will be sent for the interval if enabled. Raised alarm will be cleared at end of a following fault free interval i.e. one with all interval counter values below their threshold values and with no UAT. Only one TC alarm per interval can be raised, regardless of how many thresholds have been crossed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.1.1.1.8 |
pmTifPeriodicEventsEnabledIf set to `true(1)' then History Periodic Events will be sent.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.1.1.1.9 |
pmTifZeroSuppressionEnabledIf set to `true(1)' then Zero Suppression mode is enabled Zero Suppression mode tells whether intervals with all current counters equal to zero shall be stored in the history log or not. If enabled, once a faulty interval is found, its current register content including a zero suppressed interval counter will be stored in the history log. The additional counter specifies how many fault free intervals have preceded the faulty one. In such way, history for a larger measurement period can be logged than would otherwise be possiblerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.1.1.1.10 |
pmTifHistorySizeThe size of the history logrw Enumeration .1.3.6.1.4.1.2928.6.2.17.1.1.1.1.11 |
pmTif15mTresholdES15 minute threshold value for ES. Current ES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check.rw Counter15m .1.3.6.1.4.1.2928.6.2.17.1.1.1.1.12 |
pmTif15mTresholdSES15 minute threshold value for SES. Current SES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check.rw Counter15m .1.3.6.1.4.1.2928.6.2.17.1.1.1.1.13 |
pmTif15mTresholdBBE15 minute threshold value for BBE. Current BBE value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check.rw Gauge32 .1.3.6.1.4.1.2928.6.2.17.1.1.1.1.14 |
pmTif15mTresholdSS15 minute threshold value for SS. Current SS value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check.rw Counter15m .1.3.6.1.4.1.2928.6.2.17.1.1.1.1.15 |
pmTif24hTresholdES24 hour threshold value for ES. Current ES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check.rw Counter24h .1.3.6.1.4.1.2928.6.2.17.1.1.1.1.16 |
pmTif24hTresholdSES24 hour threshold value for SES. Current SES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check.rw Counter24h .1.3.6.1.4.1.2928.6.2.17.1.1.1.1.17 |
pmTif24hTresholdBBE24 hour threshold value for BBE. Current BBE value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check.rw Gauge32 .1.3.6.1.4.1.2928.6.2.17.1.1.1.1.18 |
pmTif24hTresholdSS24 hour threshold value for SS. Current SS value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check.rw Counter24h .1.3.6.1.4.1.2928.6.2.17.1.1.1.1.19 |
pmTifCurrentTableTable of PM data for the current 15 minute period SEQUENCE OF PmTifCurrentEntry .1.3.6.1.4.1.2928.6.2.17.1.1.2 |
pmTifCurrentEntryOne entry for each monitored object PmTifCurrentEntry .1.3.6.1.4.1.2928.6.2.17.1.1.2.1 |
pmTifCurrentTimeElapsed time in seconds for the current 15 minute period.ro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.1.2.1.2 |
pmTifCurrentSuspectIs Suspect flag, if set to `true(1)' the current 15 minute measurement period has unreliable measurement data.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.1.2.1.3 |
pmTifCurrentZSZero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one.ro Counter32 .1.3.6.1.4.1.2928.6.2.17.1.1.2.1.4 |
pmTifCurrentESsNumber of Errored Seconds (ES) for the current 15 minute period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defectro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.1.2.1.5 |
pmTifCurrentSESsNumber of Severe Errored Seconds (SES) for the current 15 minute period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect.ro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.1.2.1.6 |
pmTifCurrentBBEsNumber of Background Block Error (BBE) for the current 15 minute period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SESro Gauge32 .1.3.6.1.4.1.2928.6.2.17.1.1.2.1.7 |
pmTifCurrentUASsNumber of Unavailable Second (UAS) for the current 15 minute period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection of them is performedro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.1.2.1.8 |
pmTifCurrentSSsNumber of SLIP Second (SS) for the current 15 minute period. SS is defined as one second containing one or more SLIPsro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.1.2.1.9 |
pmTif15mTableTable of 15 minute PM log history SEQUENCE OF PmTif15mEntry .1.3.6.1.4.1.2928.6.2.17.1.1.3 |
pmTif15mEntryOne entry for each 15 minute PM interval PmTif15mEntry .1.3.6.1.4.1.2928.6.2.17.1.1.3.1 |
pmTif15mIndexThe index that identifies the interval for which the set of statistics is available. Index of '0' indicates the most recently completed interval, and the index is increased by one for each interval back in time. Unsigned32 .1.3.6.1.4.1.2928.6.2.17.1.1.3.1.1 |
pmTif15mTimeTime stamp for this 15 minute intervalro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.1.3.1.2 |
pmTif15mSuspectSuspect flag for this 15 minute intervalro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.1.3.1.3 |
pmTif15mZSZero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one.ro Counter32 .1.3.6.1.4.1.2928.6.2.17.1.1.3.1.4 |
pmTif15mESsNumber of Errored Seconds (ES) for this 15 minute period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defectro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.1.3.1.5 |
pmTif15mSESsNumber of Severe Errored Seconds (SES) for this 15 minute period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect.ro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.1.3.1.6 |
pmTif15mBBEsNumber of Background Block Error (BBE) for this 15 minute period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SESro Gauge32 .1.3.6.1.4.1.2928.6.2.17.1.1.3.1.7 |
pmTif15mUASsNumber of Unavailable Second (UAS) for this 15 minute period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection of them is performedro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.1.3.1.8 |
pmTif15mSSsNumber of SLIP Second (SS) for this 15 minute period. SS is defined as one second containing one or more SLIPsro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.1.3.1.9 |
pmTif24hTableTable of 24 hour PM log history SEQUENCE OF PmTif24hEntry .1.3.6.1.4.1.2928.6.2.17.1.1.4 |
pmTif24hEntryOne entry for each 24 hour PM interval PmTif24hEntry .1.3.6.1.4.1.2928.6.2.17.1.1.4.1 |
pmTif24hIndexThe index that identifies the interval for which the set of statistics is available. Index of '0' indicates the most recently completed interval, and the index is increased by one for each interval back in time. Unsigned32 .1.3.6.1.4.1.2928.6.2.17.1.1.4.1.1 |
pmTif24hTimeTime stamp for this 24 hour intervalro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.1.4.1.2 |
pmTif24hSuspectSuspect flag for this 24 hour intervalro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.1.4.1.3 |
pmTif24hZSZero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one.ro Counter32 .1.3.6.1.4.1.2928.6.2.17.1.1.4.1.4 |
pmTif24hESsNumber of Errored Seconds (ES) for this 24 hour period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defectro Counter24h .1.3.6.1.4.1.2928.6.2.17.1.1.4.1.5 |
pmTif24hSESsNumber of Severe Errored Seconds (SES) for this 24 hour period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect.ro Counter24h .1.3.6.1.4.1.2928.6.2.17.1.1.4.1.6 |
pmTif24hBBEsNumber of Background Block Error (BBE) for this 24 hour period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SESro Gauge32 .1.3.6.1.4.1.2928.6.2.17.1.1.4.1.7 |
pmTif24hUASsNumber of Unavailable Second (UAS) for this 24 hour period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection of them is performedro Counter24h .1.3.6.1.4.1.2928.6.2.17.1.1.4.1.8 |
pmTif24hSSsNumber of SLIP Second (SS) for this 24 hour period. SS is defined as one second containing one or more SLIPsro Counter24h .1.3.6.1.4.1.2928.6.2.17.1.1.4.1.9 |
pmTif24hCurrentTableTable of PM data for the current 24 hour period SEQUENCE OF PmTif24hCurrentEntry .1.3.6.1.4.1.2928.6.2.17.1.1.5 |
pmTif24hCurrentEntryOne entry for each monitored object PmTif24hCurrentEntry .1.3.6.1.4.1.2928.6.2.17.1.1.5.1 |
pmTif24hCurrentTimeElapsed time in seconds for the current 24 hour period.ro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.1.5.1.2 |
pmTif24hCurrentSuspectIs Suspect flag, if set to `true(1)' the current 24 hour measurement period has unreliable measurement data.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.1.5.1.3 |
pmTif24hCurrentZSZero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one.ro Counter32 .1.3.6.1.4.1.2928.6.2.17.1.1.5.1.4 |
pmTif24hCurrentESsNumber of Errored Seconds (ES) for the current 24 hour period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defectro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.1.5.1.5 |
pmTif24hCurrentSESsNumber of Severe Errored Seconds (SES) for the current 24 hour period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect.ro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.1.5.1.6 |
pmTif24hCurrentBBEsNumber of Background Block Error (BBE) for the current 24 hour period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SESro Gauge32 .1.3.6.1.4.1.2928.6.2.17.1.1.5.1.7 |
pmTif24hCurrentUASsNumber of Unavailable Second (UAS) for the current 24 hour period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection of them is performedro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.1.5.1.8 |
pmTif24hCurrentSSsNumber of SLIP Second (SS) for the current 24 hour period. SS is defined as one second containing one or more SLIPsro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.1.5.1.9 |
pmAifGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2928.6.2.17.1.2 |
pmAifTableTable of Performance Monitored access interfaces SEQUENCE OF PmAifEntry .1.3.6.1.4.1.2928.6.2.17.1.2.1 |
pmAifEntryOne entry for each access interface PmAifEntry .1.3.6.1.4.1.2928.6.2.17.1.2.1.1 |
pmAifIndexThe index uniquely identifying this access interface. Unsigned32 .1.3.6.1.4.1.2928.6.2.17.1.2.1.1.1 |
pmAifAdminStatusThe desired state of the PM function. Affects the operative state of the PM objectrw Enumeration .1.3.6.1.4.1.2928.6.2.17.1.2.1.1.2 |
pmAifOperStatusPM operative state.ro Enumeration .1.3.6.1.4.1.2928.6.2.17.1.2.1.1.3 |
pmAifFailureShows current failure state. An empty string indicates no failurero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.2.1.1.4 |
pmAifDataSourceThe PM Data Source objectro OBJECT IDENTIFIER .1.3.6.1.4.1.2928.6.2.17.1.2.1.1.5 |
pmAifDataSourceNameThe name of the PM Data Sourcero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.2.1.1.6 |
pmAifUatAlarmsEnabledIf set to `true(1)' then UAT alarms will be sent. Unavailable time (UAT) defines a state where a service is unable to perform its normal task due to severe errors for a longer period. It begins at detection of ten consecutive SES events and ends at detection of ten consecutive non-SES events. In both cases, the 10s are considered part of unavailable respective available time and effects the visibility of G.826 PM events (they are delayed 10s) Entry and exit of UAT is declared by raising and clearing an UAT alarm (if enabled)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.2.1.1.7 |
pmAifTresholdAlarmsEnabledIf set to `true(1)' then threshold alarms will be sent. Each 15m and 24h current register counter can be assigned a threshold value. When crossed, a threshold crossing alarm will be sent for the interval if enabled. Raised alarm will be cleared at end of a following fault free interval i.e. one with all interval counter values below their threshold values and with no UAT. Only one TC alarm per interval can be raised, regardless of how many thresholds have been crossed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.2.1.1.8 |
pmAifPeriodicEventsEnabledIf set to `true(1)' then History Periodic Events will be sent.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.2.1.1.9 |
pmAifZeroSuppressionEnabledIf set to `true(1)' then Zero Suppression mode is enabled Zero Suppression mode tells whether intervals with all current counters equal to zero shall be stored in the history log or not. If enabled, once a faulty interval is found, its current register content including a zero suppressed interval counter will be stored in the history log. The additional counter specifies how many fault free intervals have preceded the faulty one. In such way, history for a larger measurement period can be logged than would otherwise be possiblerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.2.1.1.10 |
pmAifHistorySizeThe size of the history logrw Enumeration .1.3.6.1.4.1.2928.6.2.17.1.2.1.1.11 |
pmAif15mTresholdES15 minute threshold value for ES. Current ES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check.rw Counter15m .1.3.6.1.4.1.2928.6.2.17.1.2.1.1.12 |
pmAif15mTresholdSES15 minute threshold value for SES. Current SES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check.rw Counter15m .1.3.6.1.4.1.2928.6.2.17.1.2.1.1.13 |
pmAif15mTresholdBBE15 minute threshold value for BBE. Current BBE value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check.rw Gauge32 .1.3.6.1.4.1.2928.6.2.17.1.2.1.1.14 |
pmAif24hTresholdES24 hour threshold value for ES. Current ES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check.rw Counter24h .1.3.6.1.4.1.2928.6.2.17.1.2.1.1.15 |
pmAif24hTresholdSES24 hour threshold value for SES. Current SES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check.rw Counter24h .1.3.6.1.4.1.2928.6.2.17.1.2.1.1.16 |
pmAif24hTresholdBBE24 hour threshold value for BBE. Current BBE value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check.rw Gauge32 .1.3.6.1.4.1.2928.6.2.17.1.2.1.1.17 |
pmAifCurrentTableTable of PM data for the current 15 minute period SEQUENCE OF PmAifCurrentEntry .1.3.6.1.4.1.2928.6.2.17.1.2.2 |
pmAifCurrentEntryOne entry for each monitored object PmAifCurrentEntry .1.3.6.1.4.1.2928.6.2.17.1.2.2.1 |
pmAifCurrentTimeElapsed time in seconds for the current 15 minute period.ro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.2.2.1.2 |
pmAifCurrentSuspectIs Suspect flag, if set to `true(1)' the current 15 minute measurement period has unreliable measurement data.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.2.2.1.3 |
pmAifCurrentZSZero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one.ro Counter32 .1.3.6.1.4.1.2928.6.2.17.1.2.2.1.4 |
pmAifCurrentESsNumber of Errored Seconds (ES) for the current 15 minute period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defectro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.2.2.1.5 |
pmAifCurrentSESsNumber of Severe Errored Seconds (SES) for the current 15 minute period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect.ro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.2.2.1.6 |
pmAifCurrentBBEsNumber of Background Block Error (BBE) for the current 15 minute period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SESro Gauge32 .1.3.6.1.4.1.2928.6.2.17.1.2.2.1.7 |
pmAifCurrentUASsNumber of Unavailable Second (UAS) for the current 15 minute period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection of them is performedro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.2.2.1.8 |
pmAif15mTableTable of 15 minute PM interval history SEQUENCE OF PmAif15mEntry .1.3.6.1.4.1.2928.6.2.17.1.2.3 |
pmAif15mEntryOne entry for each 15 minute PM interval PmAif15mEntry .1.3.6.1.4.1.2928.6.2.17.1.2.3.1 |
pmAif15mIndexThe index that identifies the interval for which the set of statistics is available. Index of '0' indicates the most recently completed interval, and the index is increased by one for each interval back in time. Unsigned32 .1.3.6.1.4.1.2928.6.2.17.1.2.3.1.1 |
pmAif15mTimeTime stamp for this 15 minute intervalro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.2.3.1.2 |
pmAif15mSuspectSuspect flag for this 15 minute intervalro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.2.3.1.3 |
pmAif15mZSZero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one.ro Counter32 .1.3.6.1.4.1.2928.6.2.17.1.2.3.1.4 |
pmAif15mESsNumber of Errored Seconds (ES) for this 15 minute period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defectro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.2.3.1.5 |
pmAif15mSESsNumber of Severe Errored Seconds (SES) for this 15 minute period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect.ro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.2.3.1.6 |
pmAif15mBBEsNumber of Background Block Error (BBE) for this 15 minute period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SESro Gauge32 .1.3.6.1.4.1.2928.6.2.17.1.2.3.1.7 |
pmAif15mUASsNumber of Unavailable Second (UAS) for this 15 minute period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection of them is performedro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.2.3.1.8 |
pmAif24hTableTable of 24 hour PM log history SEQUENCE OF PmAif24hEntry .1.3.6.1.4.1.2928.6.2.17.1.2.4 |
pmAif24hEntryOne entry for each 24 hour PM interval PmAif24hEntry .1.3.6.1.4.1.2928.6.2.17.1.2.4.1 |
pmAif24hIndexThe index that identifies the interval for which the set of statistics is available. Index of '0' indicates the most recently completed interval, and the index is increased by one for each interval back in time. Unsigned32 .1.3.6.1.4.1.2928.6.2.17.1.2.4.1.1 |
pmAif24hTimeTime stamp for this 24 hour intervalro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.2.4.1.2 |
pmAif24hSuspectSuspect flag for this 24 hour intervalro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.2.4.1.3 |
pmAif24hZSZero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one.ro Counter32 .1.3.6.1.4.1.2928.6.2.17.1.2.4.1.4 |
pmAif24hESsNumber of Errored Seconds (ES) for this 24 hour period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defectro Counter24h .1.3.6.1.4.1.2928.6.2.17.1.2.4.1.5 |
pmAif24hSESsNumber of Severe Errored Seconds (SES) for this 24 hour period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect.ro Counter24h .1.3.6.1.4.1.2928.6.2.17.1.2.4.1.6 |
pmAif24hBBEsNumber of Background Block Error (BBE) for this 24 hour period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SESro Gauge32 .1.3.6.1.4.1.2928.6.2.17.1.2.4.1.7 |
pmAif24hUASsNumber of Unavailable Second (UAS) for this 24 hour period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection of them is performedro Counter24h .1.3.6.1.4.1.2928.6.2.17.1.2.4.1.8 |
pmAif24hCurrentTableTable of PM data for the current 24 hour period SEQUENCE OF PmAif24hCurrentEntry .1.3.6.1.4.1.2928.6.2.17.1.2.5 |
pmAif24hCurrentEntryOne entry for each monitored object PmAif24hCurrentEntry .1.3.6.1.4.1.2928.6.2.17.1.2.5.1 |
pmAif24hCurrentTimeElapsed time in seconds for the current 24 hour period.ro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.2.5.1.2 |
pmAif24hCurrentSuspectIs Suspect flag, if set to `true(1)' the current 24 hour measurement period has unreliable measurement data.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.2.5.1.3 |
pmAif24hCurrentZSZero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one.ro Counter32 .1.3.6.1.4.1.2928.6.2.17.1.2.5.1.4 |
pmAif24hCurrentESsNumber of Errored Seconds (ES) for the current 24 hour period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defectro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.2.5.1.5 |
pmAif24hCurrentSESsNumber of Severe Errored Seconds (SES) for the current 24 hour period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect.ro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.2.5.1.6 |
pmAif24hCurrentBBEsNumber of Background Block Error (BBE) for the current 24 hour period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SESro Gauge32 .1.3.6.1.4.1.2928.6.2.17.1.2.5.1.7 |
pmAif24hCurrentUASsNumber of Unavailable Second (UAS) for the current 24 hour period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection of them is performedro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.2.5.1.8 |
pmDchGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2928.6.2.17.1.3 |
pmDchTableTable of Performance Monitored DTM channel SEQUENCE OF PmDchEntry .1.3.6.1.4.1.2928.6.2.17.1.3.1 |
pmDchEntryOne entry for each DTM channel PmDchEntry .1.3.6.1.4.1.2928.6.2.17.1.3.1.1 |
pmDchIndexThe index uniquely identifying this DTM channel. Unsigned32 .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.1 |
pmDchAdminStatusThe desired state of the PM function. Affects the operative state of the PM objectrw Enumeration .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.2 |
pmDchOperStatusPM operative state.ro Enumeration .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.3 |
pmDchFailureShows current failure state. An empty string indicates no failurero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.4 |
pmDchDataSourceThe PM Data Source objectro OBJECT IDENTIFIER .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.5 |
pmDchDataSourceNameThe name of the PM Data Sourcero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.6 |
pmDchUatAlarmsEnabledIf set to `true(1)' then UAT alarms will be sent. Unavailable time (UAT) defines a state where a service is unable to perform its normal task due to severe errors for a longer period. It begins at detection of ten consecutive SES events and ends at detection of ten consecutive non-SES events. In both cases, the 10s are considered part of unavailable respective available time and effects the visibility of G.826 PM events (they are delayed 10s) Entry and exit of UAT is declared by raising and clearing an UAT alarm (if enabled)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.7 |
pmDchTresholdAlarmsEnabledIf set to `true(1)' then threshold alarms will be sent. Each 15m and 24h current register counter can be assigned a threshold value. When crossed, a threshold crossing alarm will be sent for the interval if enabled. Raised alarm will be cleared at end of a following fault free interval i.e. one with all interval counter values below their threshold values and with no UAT. Only one TC alarm per interval can be raised, regardless of how many thresholds have been crossed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.8 |
pmDchPeriodicEventsEnabledIf set to `true(1)' then History Periodic Events will be sent.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.9 |
pmDchZeroSuppressionEnabledIf set to `true(1)' then Zero Suppression mode is enabled Zero Suppression mode tells whether intervals with all current counters equal to zero shall be stored in the history log or not. If enabled, once a faulty interval is found, its current register content including a zero suppressed interval counter will be stored in the history log. The additional counter specifies how many fault free intervals have preceded the faulty one. In such way, history for a larger measurement period can be logged than would otherwise be possiblerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.10 |
pmDchHistorySizeThe size of the history logrw Enumeration .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.11 |
pmDch15mTresholdES15 minute threshold value for ES. Current ES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check.rw Counter15m .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.12 |
pmDch15mTresholdSES15 minute threshold value for SES. Current SES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check.rw Counter15m .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.13 |
pmDch15mTresholdBBE15 minute threshold value for BBE. Current BBE value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check.rw Gauge32 .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.14 |
pmDch24hTresholdES24 hour threshold value for ES. Current ES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check.rw Counter24h .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.15 |
pmDch24hTresholdSES24 hour threshold value for SES. Current SES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check.rw Counter24h .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.16 |
pmDch24hTresholdBBE24 hour threshold value for BBE. Current BBE value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check.rw Gauge32 .1.3.6.1.4.1.2928.6.2.17.1.3.1.1.17 |
pmDchCurrentTableTable of PM data for the current 15 minute period SEQUENCE OF PmDchCurrentEntry .1.3.6.1.4.1.2928.6.2.17.1.3.2 |
pmDchCurrentEntryOne entry for each monitored object PmDchCurrentEntry .1.3.6.1.4.1.2928.6.2.17.1.3.2.1 |
pmDchCurrentTimeElapsed time in seconds for the current 15 minute period.ro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.3.2.1.2 |
pmDchCurrentSuspectIs Suspect flag, if set to `true(1)' the current 15 minute measurement period has unreliable measurement data.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.3.2.1.3 |
pmDchCurrentZSZero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one.ro Counter32 .1.3.6.1.4.1.2928.6.2.17.1.3.2.1.4 |
pmDchCurrentESsNumber of Errored Seconds (ES) for the current 15 minute period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defectro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.3.2.1.5 |
pmDchCurrentSESsNumber of Severe Errored Seconds (SES) for the current 15 minute period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect.ro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.3.2.1.6 |
pmDchCurrentBBEsNumber of Background Block Error (BBE) for the current 15 minute period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SESro Gauge32 .1.3.6.1.4.1.2928.6.2.17.1.3.2.1.7 |
pmDchCurrentUASsNumber of Unavailable Second (UAS) for the current 15 minute period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection of them is performedro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.3.2.1.8 |
pmDch15mTableTable of 15 minute PM interval history SEQUENCE OF PmDch15mEntry .1.3.6.1.4.1.2928.6.2.17.1.3.3 |
pmDch15mEntryOne entry for each 15 minute PM interval PmDch15mEntry .1.3.6.1.4.1.2928.6.2.17.1.3.3.1 |
pmDch15mIndexThe index that identifies the interval for which the set of statistics is available. Index of '0' indicates the most recently completed interval, and the index is increased by one for each interval back in time. Unsigned32 .1.3.6.1.4.1.2928.6.2.17.1.3.3.1.1 |
pmDch15mTimeTime stamp for this 15 minute intervalro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.3.3.1.2 |
pmDch15mSuspectSuspect flag for this 15 minute intervalro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.3.3.1.3 |
pmDch15mZSZero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one.ro Counter32 .1.3.6.1.4.1.2928.6.2.17.1.3.3.1.4 |
pmDch15mESsNumber of Errored Seconds (ES) for this 15 minute period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defectro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.3.3.1.5 |
pmDch15mSESsNumber of Severe Errored Seconds (SES) for this 15 minute period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect.ro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.3.3.1.6 |
pmDch15mBBEsNumber of Background Block Error (BBE) for this 15 minute period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SESro Gauge32 .1.3.6.1.4.1.2928.6.2.17.1.3.3.1.7 |
pmDch15mUASsNumber of Unavailable Second (UAS) for this 15 minute period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection of them is performedro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.3.3.1.8 |
pmDch24hTableTable of 24 hour PM interval history SEQUENCE OF PmDch24hEntry .1.3.6.1.4.1.2928.6.2.17.1.3.4 |
pmDch24hEntryOne entry for each 24 hour PM interval PmDch24hEntry .1.3.6.1.4.1.2928.6.2.17.1.3.4.1 |
pmDch24hIndexThe index that identifies the interval for which the set of statistics is available. Index of '0' indicates the most recently completed interval, and the index is increased by one for each interval back in time. Unsigned32 .1.3.6.1.4.1.2928.6.2.17.1.3.4.1.1 |
pmDch24hTimeTime stamp for this 24 hour intervalro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.3.4.1.2 |
pmDch24hSuspectSuspect flag for this 24 hour intervalro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.3.4.1.3 |
pmDch24hZSZero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one.ro Counter32 .1.3.6.1.4.1.2928.6.2.17.1.3.4.1.4 |
pmDch24hESsNumber of Errored Seconds (ES) for this 24 hour period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defectro Counter24h .1.3.6.1.4.1.2928.6.2.17.1.3.4.1.5 |
pmDch24hSESsNumber of Severe Errored Seconds (SES) for this 24 hour period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect.ro Counter24h .1.3.6.1.4.1.2928.6.2.17.1.3.4.1.6 |
pmDch24hBBEsNumber of Background Block Error (BBE) for this 24 hour period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SESro Gauge32 .1.3.6.1.4.1.2928.6.2.17.1.3.4.1.7 |
pmDch24hUASsNumber of Unavailable Second (UAS) for this 24 hour period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection of them is performedro Counter24h .1.3.6.1.4.1.2928.6.2.17.1.3.4.1.8 |
pmDch24hCurrentTableTable of PM data for the current 24 hour period SEQUENCE OF PmDch24hCurrentEntry .1.3.6.1.4.1.2928.6.2.17.1.3.5 |
pmDch24hCurrentEntryOne entry for each monitored object PmDch24hCurrentEntry .1.3.6.1.4.1.2928.6.2.17.1.3.5.1 |
pmDch24hCurrentTimeElapsed time in seconds for the current 24 hour period.ro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.3.5.1.2 |
pmDch24hCurrentSuspectIs Suspect flag, if set to `true(1)' the current 24 hour measurement period has unreliable measurement data.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2928.6.2.17.1.3.5.1.3 |
pmDch24hCurrentZSZero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one.ro Counter32 .1.3.6.1.4.1.2928.6.2.17.1.3.5.1.4 |
pmDch24hCurrentESsNumber of Errored Seconds (ES) for the current 24 hour period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defectro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.3.5.1.5 |
pmDch24hCurrentSESsNumber of Severe Errored Seconds (SES) for the current 24 hour period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect.ro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.3.5.1.6 |
pmDch24hCurrentBBEsNumber of Background Block Error (BBE) for the current 24 hour period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SESro Gauge32 .1.3.6.1.4.1.2928.6.2.17.1.3.5.1.7 |
pmDch24hCurrentUASsNumber of Unavailable Second (UAS) for the current 24 hour period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection of them is performedro Counter15m .1.3.6.1.4.1.2928.6.2.17.1.3.5.1.8 |
pmConformanceGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2928.6.2.17.1.4 |
pmTifConformanceGroupThe PM Trunk Interface Conformance Group. Unknown .1.3.6.1.4.1.2928.6.2.17.1.4.1 |
pmAifConformanceGroupThe PM Access Interface Conformance Group. Unknown .1.3.6.1.4.1.2928.6.2.17.1.4.2 |
pmDchConformanceGroupThe PM Channel Conformance Group. Unknown .1.3.6.1.4.1.2928.6.2.17.1.4.3 |