Home/Catalog/NETGEAR-UDLD-MIB

NETGEAR-UDLD-MIB

AI MIB Summary

The NETGEAR-UDLD-MIB enables monitoring of Unidirectional Link Detection (UDLD) protocol states and link status on Netgear FastPath switches to detect and manage unidirectional fiber or copper link failures. It provides visibility into UDLD session configurations, neighbor discovery states, and error counters to prevent network loops caused by silent link failures.

The Netgear Private MIB for FastPath UDLD.
Main OID:
fastPathUdld.1.3.6.1.4.1.4526.10.54
13
Objects
Active
Status
5
Dependencies

Imported Objects

Objects

13 total
Object Name
fastPathUdldThe Netgear Private MIB for FastPath UDLD.
MODULE-IDENTITY
.1.3.6.1.4.1.4526.10.54
agentUdldMIBObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.4526.10.54.1
agentUdldGlobal
OBJECT IDENTIFIER
.1.3.6.1.4.1.4526.10.54.1.1
agentUdldGlobalModeIndicates the mode of UDLDP feature on the device. enable enabled on the device. disable disabled on the device.rw
Enumeration
.1.3.6.1.4.1.4526.10.54.1.1.1
agentUdldMessageIntervalIndicates interval in seconds at which each port sends a packet to all of its neighbors at steady state when the link has been identified as bidirectional.rw
INTEGER
.1.3.6.1.4.1.4526.10.54.1.1.2
agentUdldTimeoutIntervalIndicates Timeout interval in seconds.rw
INTEGER
.1.3.6.1.4.1.4526.10.54.1.1.3
agentUdldResetResets all interfaces that have been shutdown by UDLD. On read OID will always be 0.rw
Enumeration
.1.3.6.1.4.1.4526.10.54.1.1.4
agentUdldInterface
OBJECT IDENTIFIER
.1.3.6.1.4.1.4526.10.54.1.2
agentUdldInterfaceTableThe table containing the status of UDLDP on the device's interfaces.
SEQUENCE OF UdldInterfaceEntry
.1.3.6.1.4.1.4526.10.54.1.2.1
agentUdldInterfaceEntryAn entry exists for each interface that supports UDLDP.
UdldInterfaceEntry
.1.3.6.1.4.1.4526.10.54.1.2.1.1
agentUdldInterfaceOperStatusThis mib object contains the following values, which has the meaning as: 'shutdown' - An Unidirectional link has been detected and the port has been disabled. 'undetermined' - Unidirectional Link Detection protocol has not collected enough information to determine if the link is bidirectional or not. 'biDirectional' - A bidirectional link has been detected. 'notApplicable' - Unidirectional Link Detection Protocol is disabled. 'undetermined-LinkDown' - The port would transition into this state when the port link physically goes down due to any reasons other than the port been put into D-Disable mode by UDLD protocol on the switch.ro
Enumeration
.1.3.6.1.4.1.4526.10.54.1.2.1.1.1
agentUdldInterfaceAdminModeIndicates the Administrative mode of Unidirectional Link Detection Protocol Feature configured on this interface. enable enabled on this interface. disable disabled on this interface.rw
Enumeration
.1.3.6.1.4.1.4526.10.54.1.2.1.1.2
agentUdldInterfaceAggresiveMode"Indicatesrw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4526.10.54.1.2.1.1.3

More MIBs from Netgear

Browse all NetgearMIBs →
WING-MIB

Standard SNMP MIB module defining data structures for WING-MIB.

3564 objects→
FASTPATH-SWITCHING-MIB

The FASTPATH-SWITCHING-MIB enables monitoring and management of Netgear FastPath switching hardware, specifically exposing metrics related to Layer 2 forwarding tables, MAC address aging, VLAN configurations, and port statistics. This private MIB facilitates the tracking of switching plane performance and state changes within Netgear's proprietary FastPath operating environment.

731 objects→
NETGEAR-SMART-SWITCHING-MIB

The NETGEAR-SMART-SWITCHING-MIB provides vendor-specific OID extensions for monitoring and managing Layer 2 switching functions, including port status, MAC address tables, VLAN configurations, and spanning tree states on Netgear Smart Switches. This private MIB enables network management systems to retrieve granular operational data and control parameters specific to Netgear's proprietary switching firmware that are not covered by standard IEEE MIBs.

476 objects→
NETGEAR-SWITCHING-MIB

The NETGEAR-SWITCHING-MIB provides vendor-specific extensions for monitoring and managing Layer 2 switching functions on Netgear network switches, including port status, MAC address table entries, and VLAN configurations. It enables SNMP-based retrieval of proprietary switching metrics not covered by standard IETF MIBs to facilitate granular fault isolation and traffic analysis within Netgear-managed infrastructure.

476 objects→
GSM7324-SWITCHING-MIB

SNMP MIB module

327 objects→
GSM7312-SWITCHING-MIB

Standard SNMP MIB module defining data structures for GSM7312-SWITCHING-MIB.

327 objects→