NETGEAR-RADIUS-AUTH-CLIENT-MIB
The NETGEAR-RADIUS-AUTH-CLIENT-MIB enables monitoring of RADIUS authentication client states and session statistics on Netgear network devices, specifically tracking authentication success/failure counters and active user sessions for external RADIUS server interactions.
Imported Objects
Objects
27 total| Object Name |
|---|
agentRadiusThe Netgear Private MIB for Radius Authentication Client MODULE-IDENTITY .1.3.6.1.4.1.4526.11.8 |
agentRadiusConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.11.8.1 |
agentRadiusMaxTransmitMaximum number of retransmissions of a RADIUS request packetrw Unsigned32 .1.3.6.1.4.1.4526.11.8.1.1 |
agentRadiusTimeoutTime out duration (in seconds) before packets are retransmittedrw Unsigned32 .1.3.6.1.4.1.4526.11.8.1.2 |
agentRadiusAccountingModeIdentifies if RADIUS Accounting has been enabled or notrw Enumeration .1.3.6.1.4.1.4526.11.8.1.3 |
agentRadiusStatsClearWhen set to enable(1), all Radius statistics will be reset.rw Enumeration .1.3.6.1.4.1.4526.11.8.1.4 |
agentRadiusAccountingIndexNextValidIndicates the next valid index into the agentRadiusAccountingConfigTable
for creation. If no additional entries are allowed, this will be 0.ro Integer32 (0|1..2147483647) .1.3.6.1.4.1.4526.11.8.1.5 |
agentRadiusAccountingConfigTableTable with information about Radius Accounting Server IP
Addresses, port numbers and shared secret. Only one entry is
supported at this time. SEQUENCE OF AgentRadiusAccountingConfigEntry .1.3.6.1.4.1.4526.11.8.1.6 |
agentRadiusAccountingConfigEntryEntry consisting of configuration data for a Radius Accounting Server. AgentRadiusAccountingConfigEntry .1.3.6.1.4.1.4526.11.8.1.6.1 |
agentRadiusAccountingServerIndexUnique index of the configured RADIUS accounting server. The next valid
value of this object for creation is specified by
agentRadiusAccountingIndexNextValid. Integer32 .1.3.6.1.4.1.4526.11.8.1.6.1.1 |
agentRadiusAccountingServerAddressIP Address of the configured RADIUS accounting server.
This object cannot be changed after creation.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4526.11.8.1.6.1.2 |
agentRadiusAccountingServerAddressTypeIP Address Type of the configured RADIUS accounting server.
This object cannot be changed after creation.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4526.11.8.1.6.1.3 |
agentRadiusAccountingPortPort number for the RADIUS accounting server.rw Unsigned32 .1.3.6.1.4.1.4526.11.8.1.6.1.4 |
agentRadiusAccountingSecretConfigured shared sercret for the RADIUS accounting server.rw DisplayString .1.3.6.1.4.1.4526.11.8.1.6.1.5 |
agentRadiusAccountingStatusCreates or destroys a RADIUS accounting server entry.
During creation, the next available index is specified by the
agentRadiusAccountingIndexNextValid object. Rows creation using
a different value for agentRadiusAccountingServerIndex will fail.
active(1) - This entry is active.
createAndGo(4) - Creates a new entry.
destroy(6) - Deletes an entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4526.11.8.1.6.1.6 |
agentRadiusServerIndexNextValidIndicates the next valid index into the agentRadiusServerConfigTable
for creation. If no additional entries are allowed, this will be 0.ro Integer32 (0|1..2147483647) .1.3.6.1.4.1.4526.11.8.1.7 |
agentRadiusServerConfigTableTable with information about Radius Authentication Server IP
Addresses, port numbers and shared secret SEQUENCE OF AgentRadiusServerConfigEntry .1.3.6.1.4.1.4526.11.8.1.8 |
agentRadiusServerConfigEntryEntry consisting of configuration data for a Radius
Authentication Server. AgentRadiusServerConfigEntry .1.3.6.1.4.1.4526.11.8.1.8.1 |
agentRadiusServerIndexUnique index of the configured RADIUS server Integer32 .1.3.6.1.4.1.4526.11.8.1.8.1.1 |
agentRadiusServerAddressIP Address of the configured RADIUS server.
This object cannot be changed after creation.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4526.11.8.1.8.1.2 |
agentRadiusServerAddressTypeIP Address Type of the configured RADIUS server.
This object cannot be changed after creation.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4526.11.8.1.8.1.3 |
agentRadiusServerPortPort number for the RADIUS server.rw Unsigned32 .1.3.6.1.4.1.4526.11.8.1.8.1.4 |
agentRadiusServerSecretConfigured shared sercret for the RADIUS server.rw DisplayString .1.3.6.1.4.1.4526.11.8.1.8.1.5 |
agentRadiusServerPrimaryModeConfigure the RADIUS server to be the primary server. If there is any
other server that is configured to be primary, that server is set to be
a seconday server and this entry is set Primary.rw Enumeration .1.3.6.1.4.1.4526.11.8.1.8.1.6 |
agentRadiusServerCurrentModeIndicate if the RADIUS server is the current server in user for
authentication.ro Enumeration .1.3.6.1.4.1.4526.11.8.1.8.1.7 |
agentRadiusServerMsgAuthEnable or disable the message authenticator attribute for this
RADIUS server.rw Enumeration .1.3.6.1.4.1.4526.11.8.1.8.1.8 |
agentRadiusServerStatusCreates or destroys a RADIUS Authentication server entry.
During creation, the next available index is specified by the
agentRadiusServerIndexNextValid object. Rows creation using
a different value for agentRadiusServerIndex will fail.
active(1) - This entry is active.
createAndGo(4) - Creates a new entry.
destroy(6) - Deletes an entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4526.11.8.1.8.1.9 |
More MIBs from Netgear
Browse all NetgearMIBs →Standard SNMP MIB module defining data structures for WING-MIB.
The FASTPATH-SWITCHING-MIB enables monitoring and management of Netgear FastPath switching hardware, specifically exposing metrics related to Layer 2 forwarding tables, MAC address aging, VLAN configurations, and port statistics. This private MIB facilitates the tracking of switching plane performance and state changes within Netgear's proprietary FastPath operating environment.
The NETGEAR-SMART-SWITCHING-MIB provides vendor-specific OID extensions for monitoring and managing Layer 2 switching functions, including port status, MAC address tables, VLAN configurations, and spanning tree states on Netgear Smart Switches. This private MIB enables network management systems to retrieve granular operational data and control parameters specific to Netgear's proprietary switching firmware that are not covered by standard IEEE MIBs.
The NETGEAR-SWITCHING-MIB provides vendor-specific extensions for monitoring and managing Layer 2 switching functions on Netgear network switches, including port status, MAC address table entries, and VLAN configurations. It enables SNMP-based retrieval of proprietary switching metrics not covered by standard IETF MIBs to facilitate granular fault isolation and traffic analysis within Netgear-managed infrastructure.
SNMP MIB module
Standard SNMP MIB module defining data structures for GSM7312-SWITCHING-MIB.