Home/Catalog/NETGEAR-POWER-ETHERNET-MIB

NETGEAR-POWER-ETHERNET-MIB

AI MIB Summary

The NETGEAR-POWER-ETHERNET-MIB extends the IETF POWER-ETHERNET-MIB to enable SNMP monitoring of Power over Ethernet (PoE) Power Source Equipment (PSE) metrics on Netgear hardware, specifically exposing vendor-specific operational parameters such as power allocation status, per-port power consumption, and fault conditions not covered by the standard draft.

This MIB Augments the POWER-ETHERNET-MIB created by the IETF Ethernet Interfaces and Hub MIB Working Group for managing Power Source Equipment (PSE). The objects in this MIB are intended to provide additional objects for reporting information available to the hardware on this platform which are not represented in the draft MIB.
Main OID:
agentPowerEthernetMIB.ng7000Switch.15
8
Objects
Active
Status
3
Dependencies

Imported Objects

Objects

8 total
Object Name
agentPowerEthernetMIBThis MIB Augments the POWER-ETHERNET-MIB created by the IETF Ethernet Interfaces and Hub MIB Working Group for managing Power Source Equipment (PSE). The objects in this MIB are intended to provide additional objects for reporting information available to the hardware on this platform which are not represented in the draft MIB.
MODULE-IDENTITY
.ng7000Switch.15
agentPethObjects
OBJECT IDENTIFIER
.ng7000Switch.15.1
agentPethPsePortTableA table of per-port information and configuration objects relating to the power status of each port.
SEQUENCE OF AgentPethPsePortEntry
.ng7000Switch.15.1.1
agentPethPsePortEntryA collection of objects providing additional power information and control parameters for the specified port.
AgentPethPsePortEntry
.ng7000Switch.15.1.1.1
agentPethPowerLimitThe configured maximum power this port can provide to an attached device measured in Watts.rw
Gauge32
.ng7000Switch.15.1.1.1.1
agentPethOutputPowerThe power this port is supplying to an attached device measured in Milliwatts.ro
Gauge32 UNITS "Milliwatts"
.ng7000Switch.15.1.1.1.2
agentPethOutputCurrentThe current this port is supplying to an attached device measured in Milliamps.ro
Gauge32 UNITS "Milliamps"
.ng7000Switch.15.1.1.1.3
agentPethOutputVoltsThe voltage this port is supplying to an attached device measured in Volts.ro
Gauge32 UNITS "Volts"
.ng7000Switch.15.1.1.1.4
NETGEAR-POWER-ETHERNET-MIB - SNMP MIB Reference | MIBs Explorer