NETGEAR-MULTICAST-MIB
The NETGEAR-MULTICAST-MIB module enables monitoring and management of multicast routing table entries, group membership states, and protocol-specific counters on NETGEAR hardware running the Multicast Routing Flex package. It provides visibility into IGMP/MLD session statistics, multicast forwarding table sizes, and interface-level multicast traffic metrics for troubleshooting Layer 3 multicast delivery.
Imported Objects
Objects
42 total| Object Name |
|---|
fastPathMulticastThe MIB definitions for Multicast Routing Flex package. MODULE-IDENTITY .1.3.6.1.4.1.4526.10.4 |
agentMulticastIGMPConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.4.1 |
agentMulticastIGMPAdminModeThis enables or disables IGMP on the system.rw Enumeration .1.3.6.1.4.1.4526.10.4.1.1 |
agentMulticastIGMPInterfaceTableProvides Per-Interface configuration of IGMP.obsolete SEQUENCE OF AgentMulticastIGMPInterfaceEntry .1.3.6.1.4.1.4526.10.4.1.2 |
agentMulticastIGMPInterfaceEntryInformation about a table entry.obsolete AgentMulticastIGMPInterfaceEntry .1.3.6.1.4.1.4526.10.4.1.2.1 |
agentMulticastIGMPInterfaceIfIndexIdentifies the external interface number.roobsolete Integer32 .1.3.6.1.4.1.4526.10.4.1.2.1.1 |
agentMulticastIGMPInterfaceAdminModeThis enables or disables IGMP on this interface.rwobsolete Enumeration .1.3.6.1.4.1.4526.10.4.1.2.1.2 |
agentMulticastPIMConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.4.2 |
agentMulticastPIMConfigModeThis controls which PIM mode configuration the PIM-MIB displays.rwobsolete Enumeration .1.3.6.1.4.1.4526.10.4.2.1 |
agentMulticastPIMSMConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.4.3 |
agentMulticastPIMSMAdminModeThis enables or disables PIM Sparse Mode on the system.rw Enumeration .1.3.6.1.4.1.4526.10.4.3.1 |
agentMulticastPIMSMDataThresholdRateSpecifies the minimum rate in Kbits/sec for the last hop router to initiate switching to the shortest path.rw Integer32 .1.3.6.1.4.1.4526.10.4.3.2 |
agentMulticastPIMSMRegThresholdRateSpecifies the minimum rate in Kbits/sec for the RP to switch to the shortest path.rw Integer32 .1.3.6.1.4.1.4526.10.4.3.3 |
agentMulticastPIMSMStaticRPTableProvides Per-Interface configuration of PIM-SM.obsolete SEQUENCE OF AgentMulticastPIMSMStaticRPEntry .1.3.6.1.4.1.4526.10.4.3.4 |
agentMulticastPIMSMStaticRPEntryInformation about a table entry.obsolete AgentMulticastPIMSMStaticRPEntry .1.3.6.1.4.1.4526.10.4.3.4.1 |
agentMulticastPIMSMStaticRPIpAddrIP Address of the RP.obsolete IpAddress .1.3.6.1.4.1.4526.10.4.3.4.1.1 |
agentMulticastPIMSMStaticRPGroupIpAddrGroup IP Address supported by the RP.obsolete IpAddress .1.3.6.1.4.1.4526.10.4.3.4.1.2 |
agentMulticastPIMSMStaticRPGroupIpMaskGroup mask for the group IP Address.obsolete IpAddress .1.3.6.1.4.1.4526.10.4.3.4.1.3 |
agentMulticastPIMSMStaticRPStatusStatus of this entry in the Static RP Table. Allowed values are: active(1) - This entry is active destroy(6) - Setting an entry to this value removes the entry from the table.rwobsolete RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4526.10.4.3.4.1.4 |
agentMulticastPIMSMInterfaceTableProvides Per-Interface configuration of PIM-SM.obsolete SEQUENCE OF AgentMulticastPIMSMInterfaceEntry .1.3.6.1.4.1.4526.10.4.3.5 |
agentMulticastPIMSMInterfaceEntryAllows configuration of parameters not provided in the standard PIM-MIB.obsolete AgentMulticastPIMSMInterfaceEntry .1.3.6.1.4.1.4526.10.4.3.5.1 |
agentMulticastPIMSMInterfaceIndexRouting Interface associated with this PIM SM configuration entry.obsolete Unsigned32 .1.3.6.1.4.1.4526.10.4.3.5.1.1 |
agentMulticastPIMSMInterfaceCBSRHashMaskLengthThe BSR hash mask length to be advertised in bootstrap messages if this interface is elected as the bootstrap router. This hash mask length will be used in the hash algorith for selecting the RP for a particular group.rwobsolete Unsigned32 .1.3.6.1.4.1.4526.10.4.3.5.1.2 |
agentMulticastPIMSMInterfaceCRPPreferenceThe preference value for the local interface as a Candidate Rendezvous Point. The value of -1 is used to indicate that the local interface is not a Candidate RP interface.rwobsolete Integer32 (-1|0..255) .1.3.6.1.4.1.4526.10.4.3.5.1.3 |
agentMulticastPIMDMConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.4.4 |
agentMulticastPIMDMAdminModeThis enables or disables PIM Dense Mode on the system.rw Enumeration .1.3.6.1.4.1.4526.10.4.4.1 |
agentMulticastRoutingConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.4.5 |
agentMulticastRoutingAdminModeThis enables or disables Multicast Routing Mode on the system.rw Enumeration .1.3.6.1.4.1.4526.10.4.5.1 |
agentMulticastDVMRPConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.4.6 |
agentMulticastDVMRPAdminModeThis enables or disables DVMRP on the system.rw Enumeration .1.3.6.1.4.1.4526.10.4.6.1 |
agentSnmpTrapFlagsConfigGroupMulticast OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.4.7 |
agentSnmpDVMRPTrapFlagThis enables or disables DVMRP Traps on the system.rw Enumeration .1.3.6.1.4.1.4526.10.4.7.1 |
agentSnmpPIMTrapFlagThis enables or disables PIM Traps on the system.rw Enumeration .1.3.6.1.4.1.4526.10.4.7.2 |
agentIpStaticMRouteTableThe table listing the Static Multicast Route Entries. SEQUENCE OF AgentIpStaticMRouteEntry .1.3.6.1.4.1.4526.10.4.8 |
agentIpStaticMRouteEntryInformation about a table entry. AgentIpStaticMRouteEntry .1.3.6.1.4.1.4526.10.4.8.1 |
agentIpStaticMRouteSrcAddressTypeThe address type of this Multicast data source. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4526.10.4.8.1.1 |
agentIpStaticMRouteSrcIpAddrThe address of the Multicast data source. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4526.10.4.8.1.2 |
agentIpStaticMRouteSrcNetMaskThe network mask for the IP address of the Multicast data source.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4526.10.4.8.1.3 |
agentIpStaticMRouteRpfIpAddrThe RPF Address.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4526.10.4.8.1.4 |
agentIpStaticMRouteIfIndexThe interface index if RPF address is link-local.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4526.10.4.8.1.5 |
agentIpStaticMRoutePreferenceThe preference of this route entry.rw Integer32 .1.3.6.1.4.1.4526.10.4.8.1.6 |
agentIpStaticMRouteStatusThe preference of this route entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4526.10.4.8.1.7 |
More MIBs from Netgear
Browse all NetgearMIBs →Standard SNMP MIB module defining data structures for WING-MIB.
The FASTPATH-SWITCHING-MIB enables monitoring and management of Netgear FastPath switching hardware, specifically exposing metrics related to Layer 2 forwarding tables, MAC address aging, VLAN configurations, and port statistics. This private MIB facilitates the tracking of switching plane performance and state changes within Netgear's proprietary FastPath operating environment.
The NETGEAR-SMART-SWITCHING-MIB provides vendor-specific OID extensions for monitoring and managing Layer 2 switching functions, including port status, MAC address tables, VLAN configurations, and spanning tree states on Netgear Smart Switches. This private MIB enables network management systems to retrieve granular operational data and control parameters specific to Netgear's proprietary switching firmware that are not covered by standard IEEE MIBs.
The NETGEAR-SWITCHING-MIB provides vendor-specific extensions for monitoring and managing Layer 2 switching functions on Netgear network switches, including port status, MAC address table entries, and VLAN configurations. It enables SNMP-based retrieval of proprietary switching metrics not covered by standard IETF MIBs to facilitate granular fault isolation and traffic analysis within Netgear-managed infrastructure.
SNMP MIB module
Standard SNMP MIB module defining data structures for GSM7312-SWITCHING-MIB.