NETGEAR-MRP-MIB
The NETGEAR-MRP-MIB enables management of Netgear hardware to configure and monitor IEEE 802.1Qat Stream Reservation Protocol (SRP) and IEEE 802.1Qav Traffic Shaping parameters. This module exposes specific metrics for stream admission control, bandwidth reservation, and traffic shaping policies required for time-sensitive networking.
Imported Objects
Objects
9 total| Object Name |
|---|
fastPathMRPThe Netgear Private MIB for 802.1Qat, 802.1Qav Configuration MODULE-IDENTITY .1.3.6.1.4.1.4526.10.60 |
agentDot1qMrp OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.60.1 |
agentDot1qPortMrpTableA table of MRP control information about every bridge
port. This is indexed by agentDot1qBasePort. SEQUENCE OF Dot1qPortMrpEntry .1.3.6.1.4.1.4526.10.60.1.1 |
agentDot1qPortMrpEntryMRP control information for a bridge port. Dot1qPortMrpEntry .1.3.6.1.4.1.4526.10.60.1.1.1 |
agentDot1qMrpPortThe MRP port number. Unsigned32 .1.3.6.1.4.1.4526.10.60.1.1.1.1 |
agentDot1qPortMrpJoinTimeThe MRP Join time, in centiseconds.rw TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.4526.10.60.1.1.1.2 |
agentDot1qPortMrpLeaveTimeThe MRP Leave time, in centiseconds.rw TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.4526.10.60.1.1.1.3 |
agentDot1qPortMrpLeaveAllTimeThe MRP LeaveAll time, in centiseconds.rw TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.4526.10.60.1.1.1.4 |
agentDot1qMrpMxrp OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.60.2 |
More MIBs from Netgear
Browse all NetgearMIBs →Standard SNMP MIB module defining data structures for WING-MIB.
The FASTPATH-SWITCHING-MIB enables monitoring and management of Netgear FastPath switching hardware, specifically exposing metrics related to Layer 2 forwarding tables, MAC address aging, VLAN configurations, and port statistics. This private MIB facilitates the tracking of switching plane performance and state changes within Netgear's proprietary FastPath operating environment.
The NETGEAR-SMART-SWITCHING-MIB provides vendor-specific OID extensions for monitoring and managing Layer 2 switching functions, including port status, MAC address tables, VLAN configurations, and spanning tree states on Netgear Smart Switches. This private MIB enables network management systems to retrieve granular operational data and control parameters specific to Netgear's proprietary switching firmware that are not covered by standard IEEE MIBs.
The NETGEAR-SWITCHING-MIB provides vendor-specific extensions for monitoring and managing Layer 2 switching functions on Netgear network switches, including port status, MAC address table entries, and VLAN configurations. It enables SNMP-based retrieval of proprietary switching metrics not covered by standard IETF MIBs to facilitate granular fault isolation and traffic analysis within Netgear-managed infrastructure.
SNMP MIB module
Standard SNMP MIB module defining data structures for GSM7312-SWITCHING-MIB.