NETGEAR-ME-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for NETGEAR-ME-MIB.
123
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
123 total| Object Name |
|---|
netgear OBJECT IDENTIFIER .1.3.6.1.4.1.4526 |
RFC1213-MIB Unknown .1.3.6.1.4.1.4526 |
wirelessProducts OBJECT IDENTIFIER .1.3.6.1.4.1.4526.4 |
wirelessAccessPointDev OBJECT IDENTIFIER .1.3.6.1.4.1.4526.4.1 |
wirelessAPSystemGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.4.1.1 |
wirelessAPMacAddrAccess Point MAC address, It will be like '00c002003009'ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.4.1.1.1 |
wirelessAPFWVerAccess Point firmware version, It will be like 'Version 2.0 Release 08'ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.4.1.1.2 |
wirelessAPDateTimeThe date and time, with optional timezone
information. It will be like '2003-04-03 02:50:54 GMT'ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.4.1.1.3 |
wirelessAPUpTimeThe time (in hundredths of a second) since the
network management portion of the system was last
re-initialized.
It will like '11223533' in the unit of 1/100second.
This object value is the same as MIB-II sysUpTime objectro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4526.4.1.1.4 |
wirelessAPResetNowSetting this object to true(1) causes the device to reset.
Reading this object always returns false(2).rw Enumeration .1.3.6.1.4.1.4526.4.1.1.5 |
wirelessAPResetToFactoryDefaultSetting this object to true(1) causes the device to reset to factory default value. Reading this object always returns false(2).rw Enumeration .1.3.6.1.4.1.4526.4.1.1.6 |
wirelessAPPasswordGet/Set the passwordrw DisplayString .1.3.6.1.4.1.4526.4.1.1.7 |
wirelessAPClearLogSetting this value clear(1) causes the AP to clear the log data,
Reading this walue always return not-clear(0).rw Enumeration .1.3.6.1.4.1.4526.4.1.1.8 |
wirelessAPSaveConfigurationSetting this value save(1) causes the settings changed by SNMP to be stored forever but in memory,
Reading this walue always return save(0).rw Enumeration .1.3.6.1.4.1.4526.4.1.1.9 |
snmpTrapVersionrw Enumeration .1.3.6.1.4.1.4526.4.1.1.10 |
snmpTrapRcvIpTyperw Enumeration .1.3.6.1.4.1.4526.4.1.1.11 |
snmpAPTrapRcvIpAddressrw IpAddress .1.3.6.1.4.1.4526.4.1.1.12 |
snmpAPSNMPEnablerw Enumeration .1.3.6.1.4.1.4526.4.1.1.13 |
snmpAPCommunityrw DisplayString .1.3.6.1.4.1.4526.4.1.1.14 |
snmpAPAccessRightrw Enumeration .1.3.6.1.4.1.4526.4.1.1.15 |
snmpAPManagersTyperw Enumeration .1.3.6.1.4.1.4526.4.1.1.16 |
snmpAPSpecificStationIprw IpAddress .1.3.6.1.4.1.4526.4.1.1.17 |
snmpAPTrapEnablerw Enumeration .1.3.6.1.4.1.4526.4.1.1.18 |
wirelessAPConnectedStationGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.4.1.2 |
wirelessAPConnectedStationTableRefreshSetting this value to refresh(1), the wireless AP will start the conntected Station Table refresh progress.
Reading this vlaue always return not-refresh(1)rw Enumeration .1.3.6.1.4.1.4526.4.1.2.1 |
wirelessAPConnectedStation OBJECT IDENTIFIER .1.3.6.1.4.1.4526.4.1.2.2 |
wirelessAPConnectedStationTableWireless AP Connected Station Table Object SEQUENCE OF WirelessAPConnectedStationEntry .1.3.6.1.4.1.4526.4.1.2.2.1 |
wirelessAPConnectedStationEntryAn entry containing information for Wireless AP Connected Station Table WirelessAPConnectedStationEntry .1.3.6.1.4.1.4526.4.1.2.2.1.1 |
wirelessAPConnectedStationMacAddrWireless Connected Station Mac Addressro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.4.1.2.2.1.1.2 |
wirelessAPConnectedStationStatusWireless Connected Station Statusro Enumeration .1.3.6.1.4.1.4526.4.1.2.2.1.1.3 |
wirelessAPControlWireless Access Point Controlrw Enumeration .1.3.6.1.4.1.4526.4.1.2.3 |
wirelessAPControlList OBJECT IDENTIFIER .1.3.6.1.4.1.4526.4.1.2.4 |
wirelessAPControlListTableWireless Access Point Control List Table Object SEQUENCE OF WirelessAPControlListEntry .1.3.6.1.4.1.4526.4.1.2.4.1 |
wirelessAPControlListEntryAn entry containing information for Wireless Access Point Control List Table Object WirelessAPControlListEntry .1.3.6.1.4.1.4526.4.1.2.4.1.1 |
wirelessAPControlListMacAddrWireless Access Point Control List Mac Addressrw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.4.1.2.4.1.1.2 |
wirelessAPCtlOperate OBJECT IDENTIFIER .1.3.6.1.4.1.4526.4.1.2.5 |
wirelessAPAddCtlMacAddrThe added entry's Physical Address,
Reading this object always return '000000000000'rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.4.1.2.5.1 |
wirelessAPDelCtlMacAddrThe deleted entry's Physical Address,
Reading this object always return '000000000000'rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.4.1.2.5.2 |
wirelessAPIfTrafficGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.4.1.3 |
wirelessAPIfWiredTrafficGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.4.1.3.1 |
wirelessAPIfWiredTotalOctetsInTraffic received by the wireless AP via Ethernet in octetsro Counter32 .1.3.6.1.4.1.4526.4.1.3.1.1 |
wirelessAPIfWiredTotalOctetsOutTraffic transmitted by the wireless AP via Ethernet in octetsro Counter32 .1.3.6.1.4.1.4526.4.1.3.1.2 |
wirelessAPIfWiredPacketsInTraffic received by the wireless AP via Ethernet in packetsro Counter32 .1.3.6.1.4.1.4526.4.1.3.1.3 |
wirelessAPIfWiredPacketsOutTraffic transmitted by the wireless AP via Ethernet in packets.ro Counter32 .1.3.6.1.4.1.4526.4.1.3.1.4 |
wirelessAPIfWiredThroughputInThroughput-in at Ethernet by the wireless AP in the unit of B/sro Counter32 .1.3.6.1.4.1.4526.4.1.3.1.5 |
wirelessAPIfWiredThroughputOutThroughput-out at Ethernet by the wireless AP in the unit of B/sro Counter32 .1.3.6.1.4.1.4526.4.1.3.1.6 |
wirelessAPIfWiredErrorsInCRC errors in in-traffic occurs at Ethernet by the wireless APro Counter32 .1.3.6.1.4.1.4526.4.1.3.1.7 |
wirelessAPIfWiredErrorsOutCRC errors in out-traffic occurs at Ethernet by the wireless APro Counter32 .1.3.6.1.4.1.4526.4.1.3.1.8 |
wirelessAPIfWiredTrafficResetCounterReset the Etherenet interface both Octets In and Out countersrw Enumeration .1.3.6.1.4.1.4526.4.1.3.1.9 |
wirelessAPIfWlanTrafficGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.4.1.3.2 |
wirelessAPIfWLANTotalOctetsInTraffic received via WLAN by the wireless AP in octetsro Counter32 .1.3.6.1.4.1.4526.4.1.3.2.1 |
wirelessAPIfWLANTotalOctetsOutTraffic transmitted via WLAN by the wireless AP in octetsro Counter32 .1.3.6.1.4.1.4526.4.1.3.2.2 |
wirelessAPIfWLANUnicastPacketsInUnicast traffic received via WLAN by the wireless AP in packetsro Counter32 .1.3.6.1.4.1.4526.4.1.3.2.3 |
wirelessAPIfWLANUnicastPacketsOutUnicast traffic transmitted via WLAN by the wireless AP in packetsro Counter32 .1.3.6.1.4.1.4526.4.1.3.2.4 |
wirelessAPIfWLANBroadcastPacketsInBroadcast traffic received via WLAN by the wireless AP in packetsro Counter32 .1.3.6.1.4.1.4526.4.1.3.2.5 |
wirelessAPIfWLANBroadcastPacketsOutBroadcast traffic transmitted via WLAN by the wireless AP in packetsro Counter32 .1.3.6.1.4.1.4526.4.1.3.2.6 |
wirelessAPIfWLANMulticastPacketsInMulticast traffic received via WLAN by the wireless AP in packetsro Counter32 .1.3.6.1.4.1.4526.4.1.3.2.7 |
wirelessAPIfWLANMulticastPacketsOutMulticast traffic transmitted via WLAN by the wireless AP in packetsro Counter32 .1.3.6.1.4.1.4526.4.1.3.2.8 |
wirelessAPIfWLANThroughputInThroughtput-in at WLAN transmitted by the wireless AP in the unit of B/sro Counter32 .1.3.6.1.4.1.4526.4.1.3.2.9 |
wirelessAPIfWLANThroughputOutThroughtput-out at WLAN transmitted by the wireless AP in the unit of B/sro Counter32 .1.3.6.1.4.1.4526.4.1.3.2.10 |
wirelessAPIfWLANPacketsInTotal in-packets at WLAN received by the wireless AP in packetsro Counter32 .1.3.6.1.4.1.4526.4.1.3.2.11 |
wirelessAPIfWLANPacketsOutTotal out-packets at WLAN transmitted by the wireless AP in packetsro Counter32 .1.3.6.1.4.1.4526.4.1.3.2.12 |
wirelessAPIfWLANTrafficResetCounterReset the WLAN interface 's counters, they will start from 0 again.rw Enumeration .1.3.6.1.4.1.4526.4.1.3.2.13 |
wirelessAPIfSettingsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.4.1.4 |
wirelessAPDHCPClientObtainIPchoiceWireless Access Point DHCP Client Obtain an IP address choice
static(0) means use static IP addess;
automatic(1) means obtain an IP address automatically from
DHCP serverrw Enumeration .1.3.6.1.4.1.4526.4.1.4.1 |
wirelessAPDHCPClientIPaddrWireless Access Point DHCP Client IP address
If wirelessAPDHCPClientObtainIPchoice is set to static(0),
then it should be the same as
wirelessAPDHCPClientStaticIPaddr.ro IpAddress .1.3.6.1.4.1.4526.4.1.4.2 |
wirelessAPDHCPClientIPsubnetMaskWireless Access Point DHCP Client IP subnet mask
If wirelessAPDHCPClientObtainIPchoice is set to static(0),
then it should be the same as
wirelessAPDHCPClientStaticIPsubnetMask.ro IpAddress .1.3.6.1.4.1.4526.4.1.4.3 |
wirelessAPDHCPClientGatewayWireless Access Point DHCP Client gateway
If wirelessAPDHCPClientObtainIPchoice is set to static(0),
then it should be the same as
wirelessAPDHCPClientStaticGateway.ro IpAddress .1.3.6.1.4.1.4526.4.1.4.4 |
wirelessAPDHCPClientPriDNSWireless Access Point DHCP Client primary DNS
If wirelessAPDHCPClientObtainIPchoice is set to static(0),
then it should be the same as
wirelessAPDHCPClientStaticPriDNS.ro IpAddress .1.3.6.1.4.1.4526.4.1.4.5 |
wirelessAPDHCPClientSecDNSWireless Access Point DHCP Client secondary DNS
If wirelessAPDHCPClientObtainIPchoice is set to static(0),
then it should be the same as
wirelessAPDHCPClientStaticSecDNS.ro IpAddress .1.3.6.1.4.1.4526.4.1.4.6 |
wirelessAPDHCPClientStaticIPaddrWireless Access Point DHCP Client static IP address
If wirelessAPDHCPClientObtainIPchoice is set to automatic
(1), then it should be 0.0.0.0.rw IpAddress .1.3.6.1.4.1.4526.4.1.4.7 |
wirelessAPDHCPClientStaticIPsubnetMaskWireless Access Point DHCP Client static IP subnet mask
If wirelessAPDHCPClientObtainIPchoice is set to automatic
(1), then it should be 0.0.0.0.rw IpAddress .1.3.6.1.4.1.4526.4.1.4.8 |
wirelessAPDHCPClientStaticGatewayWireless Access Point DHCP Client static gateway
If wirelessAPDHCPClientObtainIPchoice is set to automatic
(1), then it should be 0.0.0.0.rw IpAddress .1.3.6.1.4.1.4526.4.1.4.9 |
wirelessAPDHCPClientStaticPriDNSWireless Access Point DHCP Client static primary DNS
If wirelessAPDHCPClientObtainIPchoice is set to automatic
(1), then it should be 0.0.0.0.rw IpAddress .1.3.6.1.4.1.4526.4.1.4.10 |
wirelessAPDHCPClientStaticSecDNSWireless Access Point DHCP Client static secondary DNS
If wirelessAPDHCPClientObtainIPchoice is set to automatic
(1), then it should be 0.0.0.0.rw IpAddress .1.3.6.1.4.1.4526.4.1.4.11 |
wirelessAPNameWireless Access Point Namerw DisplayString .1.3.6.1.4.1.4526.4.1.4.12 |
wirelessAPWINSchoiceWireless Access Point WINS choice
If it is set to disAbled, then not using WINS.rw Enumeration .1.3.6.1.4.1.4526.4.1.4.13 |
wirelessAPWINSServerNameWINS Server Name
If wirelessAPWINSchoice is enAbled, either set this object
If wirelessAPWINSchoice is disAbled, this object value
should be clearedrw DisplayString .1.3.6.1.4.1.4526.4.1.4.14 |
wirelessAPWirelessSettingsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.4.1.5 |
wirelessAPCountryDomainWireless Access Point Country Domainrw Enumeration .1.3.6.1.4.1.4526.4.1.5.1 |
wirelessAPChannelNoWireless Access Point Channel No
Auto(0) defaultrw INTEGER .1.3.6.1.4.1.4526.4.1.5.2 |
wirelessAPSSIDWireless Access Point SSID
This object value should be the same as
IEEE 802.11 MIB dot11DesiredSSIDrw DisplayString .1.3.6.1.4.1.4526.4.1.5.3 |
wirelessAPPassphraseWireless AP Passphrase
This object won't be allowed to write unless wirelessAPWEPEnabled is enAbledrw DisplayString .1.3.6.1.4.1.4526.4.1.5.7 |
wirelessAPGenerateKeysEnabledWireless Access Point Generate Keys
This object won't be allowed to write unless wirelessAPWEPEnabled is enAbledrw Enumeration .1.3.6.1.4.1.4526.4.1.5.8 |
wirelessAPKeysSet OBJECT IDENTIFIER .1.3.6.1.4.1.4526.4.1.5.9 |
wirelessAPKeysSetTableWireless Access Point Keys Set Table Object
This object won't be allowed to write unless wirelessAPWEPEnabled is enAbled SEQUENCE OF WirelessAPKeysSetEntry .1.3.6.1.4.1.4526.4.1.5.9.1 |
wirelessAPKeysSetEntryAn entry containing information for Wireless Access Point
Keys Set Table WirelessAPKeysSetEntry .1.3.6.1.4.1.4526.4.1.5.9.1.1 |
wirelessAPKeysSetEnabledEnabled or Disabled a Wireless Access Point Key
This object won't be allowed to write unless wirelessAPWEPEnabled is enAbled
We only allow one key set will be enabledrw Enumeration .1.3.6.1.4.1.4526.4.1.5.9.1.1.2 |
wirelessAPKeysWireless AP Key
This object won't be allowed to write unless wirelessAPWEPEnabled is enAbledrw OCTET STRING .1.3.6.1.4.1.4526.4.1.5.9.1.1.3 |
wirelessAPBasicRateChoiceWireless AP Basic Rate selection: auto(0) means
Auto-negotiate and fixed(1) means Fixed raterw Enumeration .1.3.6.1.4.1.4526.4.1.5.10 |
wirelessAPFixedRate OBJECT IDENTIFIER .1.3.6.1.4.1.4526.4.1.5.11 |
wirelessAPFixedRate1If wirelessAPBasicRateChoice is set to auto(0), then the
value in this object should be empty.
oneM means 1Mbps,
twoM means 2Mbps,
fiveDotfiveM means 5.5Mbps,
elevenM means 11Mbps
This object won't be allowed to write unless wirelessAPBasicRateChoice is set to fixed(1)rw Enumeration .1.3.6.1.4.1.4526.4.1.5.11.1 |
wirelessAPFixedRate2If wirelessAPBasicRateChoice is set to auto(0), then the
value in this object should be empty.
oneM means 1Mbps,
twoM means 2Mbps,
fiveDotfiveM means 5.5Mbps,
elevenM means 11Mbps
This object won't be allowed to write unless wirelessAPBasicRateChoice is set to fixed(1)rw Enumeration .1.3.6.1.4.1.4526.4.1.5.11.2 |
wirelessAPFixedRate5-5If wirelessAPBasicRateChoice is set to auto(0), then the
value in this object should be empty.
oneM means 1Mbps,
twoM means 2Mbps,
fiveDotfiveM means 5.5Mbps,
elevenM means 11Mbps
This object won't be allowed to write unless wirelessAPBasicRateChoice is set to fixed(1)rw Enumeration .1.3.6.1.4.1.4526.4.1.5.11.3 |
wirelessAPFixedRate11If wirelessAPBasicRateChoice is set to auto(0), then the
value in this object should be empty.
oneM means 1Mbps,
twoM means 2Mbps,
fiveDotfiveM means 5.5Mbps,
elevenM means 11Mbps
This object won't be allowed to write unless wirelessAPBasicRateChoice is set to fixed(1)rw Enumeration .1.3.6.1.4.1.4526.4.1.5.11.4 |
wirelessAPRTSThresholdThe value in this object should be the same as IEEE 802.11
dot11RTSThresholdrw INTEGER .1.3.6.1.4.1.4526.4.1.5.12 |
wirelessAPFragmentationThresholdThe value in this object should be the same as IEEE 802.11
dot11FragmentationThresholdrw INTEGER .1.3.6.1.4.1.4526.4.1.5.13 |
wirelessAPBeaconPeriodThe value in this object should be the same as IEEE 802.11
dot11BeaconPeriodrw INTEGER .1.3.6.1.4.1.4526.4.1.5.14 |
wirelessAPShortPreambleOptionImplementedThe value of this object is 0 denoting that the short preamble used,
1 denoting that the long preamble used.rw Enumeration .1.3.6.1.4.1.4526.4.1.5.15 |
wirelessAPAntennaSelectionAntenna Selectionrw Enumeration .1.3.6.1.4.1.4526.4.1.5.16 |
wirelessAPMaximumTransmitPowerLevelThe value in this object should be the same as IEEE 802.11
dot11MaximumTransmitPowerLevel. However, our default value
will be 18dbm.
copy from IEEE 802.11 MIB:
This attribute shall indicate the maximum transmit power,
in dBm, allowed in the subband for the associated domain
country string. The default value of this attribute shall
be zero.rw Enumeration .1.3.6.1.4.1.4526.4.1.5.17 |
wirelessAPOperatingModeOperating Moderw Enumeration .1.3.6.1.4.1.4526.4.1.5.18 |
wirelessAPSSIDEnabledEnabled or disabled Wireless Access Point Broadcast
Wireless Network Name SSIDrw Enumeration .1.3.6.1.4.1.4526.4.1.5.19 |
wirelessAPSecuritySettingsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.4.1.6 |
wirelessAP802dot1xSecurityEnabled802.1x Security enabled or disabledrw Enumeration .1.3.6.1.4.1.4526.4.1.6.1 |
wirelessAPEAPauthTypeOperating Mode
This object won't be allowed to write unless wirelessAP802dot1xSecurityEnabled is enAbledrw Enumeration .1.3.6.1.4.1.4526.4.1.6.2 |
wirelessAPRadiusServerRadius Server Name/IP Addressrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.4.1.6.3 |
wirelessAPRadiusPortRadius Portrw INTEGER .1.3.6.1.4.1.4526.4.1.6.4 |
wirelessAPSharedKeyRadius Server Shared Keyrw DisplayString .1.3.6.1.4.1.4526.4.1.6.5 |
wirelessAPRadiusServer2Radius Server Name/IP Addressrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.4.1.6.7 |
wirelessAPRadAccountPortRadius Accounting Portrw INTEGER .1.3.6.1.4.1.4526.4.1.6.11 |
wirelessAPKeyExchangeAP Key Exchange enabled or disabledrw Enumeration .1.3.6.1.4.1.4526.4.1.6.16 |
wirelessAPKeyExchangeKeylifeAP exchanged key lifetimerw INTEGER .1.3.6.1.4.1.4526.4.1.6.17 |
wirelessAPRadAccountEnableAP Radius Accounting enabled or disabledrw Enumeration .1.3.6.1.4.1.4526.4.1.6.18 |
wirelessAPMacAuthEnableAP Mac Authentication enabled or disabledrw Enumeration .1.3.6.1.4.1.4526.4.1.6.19 |
wirelessAPRadAccountUpdateEnableAP Radius Account Update enabled or disabledrw Enumeration .1.3.6.1.4.1.4526.4.1.6.21 |
wirelessAPRadAccountUpdatePeriodAP Radius Account Update Periodrw INTEGER .1.3.6.1.4.1.4526.4.1.6.22 |
wirelessAPRadAccountIdlePeriodIdle timer for AP not receiving any traffic from a wireless station to perform a dissociationrw INTEGER .1.3.6.1.4.1.4526.4.1.6.23 |
wirelessTIOperateModeAP Operation Moderw Enumeration .1.3.6.1.4.1.4526.4.1.6.25 |
wirelessTIDstMacThe Destination Address When one operation mode is selected which the remote address necessary.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.4.1.6.26 |
wirelessTIIsolationAP Wireless Separation Settingrw Enumeration .1.3.6.1.4.1.4526.4.1.6.28 |
wirelessTIEnable80211dAP Worldwide Mode Settingrw Enumeration .1.3.6.1.4.1.4526.4.1.6.29 |
wirelessAPSecurityModeAP Security Mode Setting, can take the place of AP Authentication and Encryption Setting Logic Relation.rw Enumeration .1.3.6.1.4.1.4526.4.1.6.37 |