NETGEAR-LOOPBACK-MIB
The NETGEAR-LOOPBACK-MIB provides vendor-specific management access to FastPath loopback interface states and diagnostic counters on NETGEAR routing hardware. It enables the monitoring of loopback session status and error statistics to validate internal packet forwarding paths and interface integrity.
Imported Objects
Objects
9 total| Object Name |
|---|
fastPathLoopbackThe NETGEAR Private MIB for FastPath Loopback MODULE-IDENTITY .1.3.6.1.4.1.4526.10.22 |
agentLoopbackGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.22.1 |
agentLoopbackTableA summary table of the Loopback instances SEQUENCE OF AgentLoopbackEntry .1.3.6.1.4.1.4526.10.22.1.1 |
agentLoopbackEntry AgentLoopbackEntry .1.3.6.1.4.1.4526.10.22.1.1.1 |
agentLoopbackIDThe Loopback ID is associated with Internal Interface number which will be generated when we create a loopback. Integer32 .1.3.6.1.4.1.4526.10.22.1.1.1.1 |
agentLoopbackIfIndexThis is external interface associated with inetrnal interface of loopback. The Loopback ID is associated with Internal Interface number which will be generated when we create a loopback.ro Integer32 .1.3.6.1.4.1.4526.10.22.1.1.1.2 |
agentLoopbackIPAddressThe IP Address configured for the respective loopbackrw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.4526.10.22.1.1.1.3 |
agentLoopbackIPSubnetThe Subnet mask configured for the respective loopbackrw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.4526.10.22.1.1.1.4 |
agentLoopbackStatusStatus of this instance. The rows can be added/deleted in the table by setting createAndGo/destroy respectively active(1) - this loopback instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instancerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4526.10.22.1.1.1.5 |
More MIBs from Netgear
Browse all NetgearMIBs →Standard SNMP MIB module defining data structures for WING-MIB.
The FASTPATH-SWITCHING-MIB enables monitoring and management of Netgear FastPath switching hardware, specifically exposing metrics related to Layer 2 forwarding tables, MAC address aging, VLAN configurations, and port statistics. This private MIB facilitates the tracking of switching plane performance and state changes within Netgear's proprietary FastPath operating environment.
The NETGEAR-SMART-SWITCHING-MIB provides vendor-specific OID extensions for monitoring and managing Layer 2 switching functions, including port status, MAC address tables, VLAN configurations, and spanning tree states on Netgear Smart Switches. This private MIB enables network management systems to retrieve granular operational data and control parameters specific to Netgear's proprietary switching firmware that are not covered by standard IEEE MIBs.
The NETGEAR-SWITCHING-MIB provides vendor-specific extensions for monitoring and managing Layer 2 switching functions on Netgear network switches, including port status, MAC address table entries, and VLAN configurations. It enables SNMP-based retrieval of proprietary switching metrics not covered by standard IETF MIBs to facilitate granular fault isolation and traffic analysis within Netgear-managed infrastructure.
SNMP MIB module
Standard SNMP MIB module defining data structures for GSM7312-SWITCHING-MIB.