NETGEAR-IPV6-TUNNEL-MIB
The NETGEAR-IPV6-TUNNEL-MIB provides vendor-specific management objects for monitoring and configuring IPv6 tunnel interfaces and FastPath acceleration parameters on NETGEAR routers. It exposes operational metrics such as tunnel status, encapsulation types, and traffic statistics to facilitate the administration of IPv6-over-IPv4 or IPv6-over-IPv6 tunneling services.
Imported Objects
Objects
17 total| Object Name |
|---|
fastPathIpv6TunnelThe NETGEAR Private MIB for FastPath IPV6 Tunnel MODULE-IDENTITY .1.3.6.1.4.1.4526.10.27 |
agentTunnelIPV6Group OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.27.1 |
agentTunnelIPV6TableA summary table of the IPV6 tunnel instances SEQUENCE OF AgentTunnelIPV6Entry .1.3.6.1.4.1.4526.10.27.1.1 |
agentTunnelIPV6Entry AgentTunnelIPV6Entry .1.3.6.1.4.1.4526.10.27.1.1.1 |
agentTunnelIDThe tunnel ID is associated with Internal Interface number which is generated when we create a tunnel, and is used to configure the tunnel. Integer32 .1.3.6.1.4.1.4526.10.27.1.1.1.1 |
agentTunnelIfIndexThe external interface of the tunnel is associted with internal interface. The tunnel ID associated with Internal Interface number is generated when we create a tunnel, which is used to configure the tunnel.ro Integer32 .1.3.6.1.4.1.4526.10.27.1.1.1.2 |
agentTunnelModeSpecifies the type of Tunnel either undefined, 6over4 or 6to4. The default value is undefined. It supports 6over4 which supports an assigned IPV6 address, an IPV4 address is not allowed. For this mode, the tunnel source and tunnel destination must be IPV4 address. For 6to4 tunnel, the tunnel source must be IPv4 address. Tunnel destination should not be set. The first 48-bits of the IPv4 address assigned to the 6to4 tunnel should be of the format 2002:sourceIpv4address.rw Enumeration .1.3.6.1.4.1.4526.10.27.1.1.1.3 |
agentTunnelLocalIP4AddrThe address of the Local endpoint of the tunnel i.e. the source address used in the outer IP header. It is 0.0.0.0 if unknown or the tunnel is over IPv6.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.4526.10.27.1.1.1.4 |
agentTunnelRemoteIP4AddrThe address of the Remote endpoint of the tunnel i.e. the destination address used in the outer IP header. It is 0.0.0.0 if the tunnel is unknown or IPv6 address, or not a point to point linkrw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.4526.10.27.1.1.1.5 |
agentTunnelLocalIfIndexSpecifies the interface for IPv6 Tunnel Sourcerw Integer32 .1.3.6.1.4.1.4526.10.27.1.1.1.6 |
agentTunnelStatusStatus of this instance.Row can be added or deleted by setting the value to createAndGo/destroy active(1) - this Tunnel instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instancerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4526.10.27.1.1.1.7 |
agentTunnelIcmpUnreachableModeSpecifies the Mode of Sending ICMPv6 Unreachable messages on this tunnel interface.rw Enumeration .1.3.6.1.4.1.4526.10.27.1.1.1.8 |
agentTunnelIPV6PrefixTableA table of the IPV6 prefixes associated with tunnel instances SEQUENCE OF AgentTunnelIPV6PrefixEntry .1.3.6.1.4.1.4526.10.27.1.2 |
agentTunnelIPV6PrefixEntry AgentTunnelIPV6PrefixEntry .1.3.6.1.4.1.4526.10.27.1.2.1 |
agentTunnelIPV6PrefixPrefixThe prefix associated with the tunnel interface. The data type is used to model the IPV6 address. It is a binary string of 16 octects in network byte-order. It specifies the IP address of tunnel which will be in IPV6 Format, generated using internal interface number. Ipv6AddressPrefix (IPV6-TC) .1.3.6.1.4.1.4526.10.27.1.2.1.1 |
agentTunnelIPV6PrefixPrefixLenThe length of the prefix (in bits). InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.4526.10.27.1.2.1.2 |
agentTunnelIPV6PrefixStatusStatus of this instance.Row can be added or deleted by setting the value to createAndGo/destroy active(1) - this Tunnel instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instancerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4526.10.27.1.2.1.3 |
More MIBs from Netgear
Browse all NetgearMIBs →Standard SNMP MIB module defining data structures for WING-MIB.
The FASTPATH-SWITCHING-MIB enables monitoring and management of Netgear FastPath switching hardware, specifically exposing metrics related to Layer 2 forwarding tables, MAC address aging, VLAN configurations, and port statistics. This private MIB facilitates the tracking of switching plane performance and state changes within Netgear's proprietary FastPath operating environment.
The NETGEAR-SMART-SWITCHING-MIB provides vendor-specific OID extensions for monitoring and managing Layer 2 switching functions, including port status, MAC address tables, VLAN configurations, and spanning tree states on Netgear Smart Switches. This private MIB enables network management systems to retrieve granular operational data and control parameters specific to Netgear's proprietary switching firmware that are not covered by standard IEEE MIBs.
The NETGEAR-SWITCHING-MIB provides vendor-specific extensions for monitoring and managing Layer 2 switching functions on Netgear network switches, including port status, MAC address table entries, and VLAN configurations. It enables SNMP-based retrieval of proprietary switching metrics not covered by standard IETF MIBs to facilitate granular fault isolation and traffic analysis within Netgear-managed infrastructure.
SNMP MIB module
Standard SNMP MIB module defining data structures for GSM7312-SWITCHING-MIB.