NETGEAR-DHCPCLIENT-PRIVATE-MIB
The NETGEAR-DHCPCLIENT-PRIVATE-MIB enables monitoring of DHCP client operational states, lease durations, assigned IP addresses, and server interaction statistics on Netgear networking hardware. This private module provides vendor-specific visibility into DHCP client session management and configuration parameters not covered by standard MIBs.
Imported Objects
Objects
14 total| Object Name |
|---|
fastPathDHCPClientPrivateThe Netgear Private MIB for NETGEAR DHCP Client MODULE-IDENTITY .1.3.6.1.4.1.4526.10.100 |
agentdhcp4ClientLeaseParameters OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.100.1 |
agentdhcp4ClientLeaseParametersTableDisplays DHCP Client Lease Information. SEQUENCE OF Agentdhcp4ClientLeaseParametersEntry .1.3.6.1.4.1.4526.10.100.1.1 |
agentdhcp4ClientLeaseParametersEntryInformation about a table entry. Agentdhcp4ClientLeaseParametersEntry .1.3.6.1.4.1.4526.10.100.1.1.1 |
agentdhcp4ClientInterfaceIndexThe Interface index on which the IP address was leased by the DHCP Server. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4526.10.100.1.1.1.1 |
agentdhcp4ClientIpAddressThe IP Address leased by the DHCP Server .ro IpAddress .1.3.6.1.4.1.4526.10.100.1.1.1.2 |
agentdhcp4ClientSubnetMaskThe Subnet mask of the IP Address leased by the DHCP Server .ro IpAddress .1.3.6.1.4.1.4526.10.100.1.1.1.3 |
agentdhcp4ClientDhcpServerAddressThe IP Address of the DHCP Server that leased the IP Address .ro IpAddress .1.3.6.1.4.1.4526.10.100.1.1.1.4 |
agentdhcp4ClientStateThe State of the DHCP Client on this interface .ro Enumeration .1.3.6.1.4.1.4526.10.100.1.1.1.5 |
agentdhcp4ClientTransactionIDThe transaction ID of the DHCP Client .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.10.100.1.1.1.6 |
agentdhcp4ClientLeaseTimeThe time remaining since the IP address is leased by the DHCP Server.It is displayed
in days, hours, minutes and seconds.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4526.10.100.1.1.1.7 |
agentdhcp4ClientRenewTimeThe time remaining to send the next DHCP Renew Request by DHCP Client to renew the leased IP address. It is displayed
in days, hours, minutes and seconds.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4526.10.100.1.1.1.8 |
agentdhcp4ClientRebindTimeThe time remaining to start the DHCP Rebind process. It is displayed
in days, hours, minutes and seconds.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4526.10.100.1.1.1.9 |
agentdhcp4ClientRetryCountThe number of times the DHCP Client sends a DHCP REQUEST message before the server responds .ro Counter32 .1.3.6.1.4.1.4526.10.100.1.1.1.10 |
More MIBs from Netgear
Browse all NetgearMIBs →Standard SNMP MIB module defining data structures for WING-MIB.
The FASTPATH-SWITCHING-MIB enables monitoring and management of Netgear FastPath switching hardware, specifically exposing metrics related to Layer 2 forwarding tables, MAC address aging, VLAN configurations, and port statistics. This private MIB facilitates the tracking of switching plane performance and state changes within Netgear's proprietary FastPath operating environment.
The NETGEAR-SMART-SWITCHING-MIB provides vendor-specific OID extensions for monitoring and managing Layer 2 switching functions, including port status, MAC address tables, VLAN configurations, and spanning tree states on Netgear Smart Switches. This private MIB enables network management systems to retrieve granular operational data and control parameters specific to Netgear's proprietary switching firmware that are not covered by standard IEEE MIBs.
The NETGEAR-SWITCHING-MIB provides vendor-specific extensions for monitoring and managing Layer 2 switching functions on Netgear network switches, including port status, MAC address table entries, and VLAN configurations. It enables SNMP-based retrieval of proprietary switching metrics not covered by standard IETF MIBs to facilitate granular fault isolation and traffic analysis within Netgear-managed infrastructure.
SNMP MIB module
Standard SNMP MIB module defining data structures for GSM7312-SWITCHING-MIB.