NETGEAR-DENIALOFSERVICE-PRIVATE-MIB
The NETGEAR-DENIALOFSERVICE-PRIVATE-MIB provides vendor-specific SNMP access to monitor and manage Denial of Service (DoS) protection counters and event logs on Netgear enterprise networking hardware. This module exposes internal metrics regarding blocked attack traffic, active mitigation sessions, and firewall rule hits to facilitate real-time security anomaly detection and incident response.
Imported Objects
Objects
10 total| Object Name |
|---|
agentDenialOfServiceThe Netgear Private MIB for Denial of Service. MODULE-IDENTITY .1.3.6.1.4.1.4526.11.31 |
agentSwitchDenialOfServiceGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.11.31.1 |
agentSwitchDenialOfServiceSIPDIPModeEnables or Disables the SIP=DIP Denial of Service
protection feature.rw Enumeration .1.3.6.1.4.1.4526.11.31.1.1 |
agentSwitchDenialOfServiceFirstFragModeEnables or Disables the First Fragment Denial of Service
protection feature.rw Enumeration .1.3.6.1.4.1.4526.11.31.1.2 |
agentSwitchDenialOfServiceTCPHdrSizeConfigures the Minimum allowed TCP Header size.
This is active if the First Fragment Denial of Service
protection feature is enabled.rw Integer32 .1.3.6.1.4.1.4526.11.31.1.3 |
agentSwitchDenialOfServiceTCPFragModeEnables or Disables the TCP Fragment Denial of Service
protection feature.rw Enumeration .1.3.6.1.4.1.4526.11.31.1.4 |
agentSwitchDenialOfServiceTCPFlagModeEnables or Disables the TCP Flag Denial of Service
protection feature.rw Enumeration .1.3.6.1.4.1.4526.11.31.1.5 |
agentSwitchDenialOfServiceL4PortModeEnables or Disables the L4 Port Denial of Service
protection feature.rw Enumeration .1.3.6.1.4.1.4526.11.31.1.6 |
agentSwitchDenialOfServiceICMPModeEnables or Disables the ICMP Denial of Service
protection feature.rw Enumeration .1.3.6.1.4.1.4526.11.31.1.7 |
agentSwitchDenialOfServiceICMPSizeConfigures the Maximum allowed ICMP data size.
This is active if the ICMP Denial of Service
protection feature is enabled.rw Integer32 .1.3.6.1.4.1.4526.11.31.1.8 |
More MIBs from Netgear
Browse all NetgearMIBs →Standard SNMP MIB module defining data structures for WING-MIB.
The FASTPATH-SWITCHING-MIB enables monitoring and management of Netgear FastPath switching hardware, specifically exposing metrics related to Layer 2 forwarding tables, MAC address aging, VLAN configurations, and port statistics. This private MIB facilitates the tracking of switching plane performance and state changes within Netgear's proprietary FastPath operating environment.
The NETGEAR-SMART-SWITCHING-MIB provides vendor-specific OID extensions for monitoring and managing Layer 2 switching functions, including port status, MAC address tables, VLAN configurations, and spanning tree states on Netgear Smart Switches. This private MIB enables network management systems to retrieve granular operational data and control parameters specific to Netgear's proprietary switching firmware that are not covered by standard IEEE MIBs.
The NETGEAR-SWITCHING-MIB provides vendor-specific extensions for monitoring and managing Layer 2 switching functions on Netgear network switches, including port status, MAC address table entries, and VLAN configurations. It enables SNMP-based retrieval of proprietary switching metrics not covered by standard IETF MIBs to facilitate granular fault isolation and traffic analysis within Netgear-managed infrastructure.
SNMP MIB module
Standard SNMP MIB module defining data structures for GSM7312-SWITCHING-MIB.