MY-NTP-MIB
This module defines my ntp mibs.
Main OID:
myNtpMIB.1.3.6.1.4.1.171.10.97.2.49
14
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
14 total| Object Name |
|---|
myNtpMIBThis module defines my ntp mibs. MODULE-IDENTITY .1.3.6.1.4.1.171.10.97.2.49 |
RFC1155-SMIThis module defines my ntp mibs. Unknown .1.3.6.1.4.1.171.10.97.2.49 |
myNtpMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.97.2.49.1 |
myntpSystem OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.97.2.49.1.1 |
myntpSysLeapTwo-bit code warning of an impending leap second to
be inserted in the NTP timescale. This object can be
set only when the myntpSysStratum has a value of 1.rw NTPLeapIndicator -- Rsyntax INTEGER { -- enum value of zero may cause problems -- noWarning(0), -- addSecond(1), -- subtractSecond(2), -- alarm(3) -- } .1.3.6.1.4.1.171.10.97.2.49.1.1.1 |
myntpSysStratumThe stratum of the local clock. If the value is set
to 1, i.e., this is a primary reference, then the
Primary-Clock procedure described in Section 3.4.6,
in RFC-1305 is invoked.rw NTPStratum -- Rsyntax INTEGER .1.3.6.1.4.1.171.10.97.2.49.1.1.2 |
myntpSysPrecisionSigned integer indicating the precision
of the system clock, in seconds to the nearest
power of two. The value must be rounded to the
next larger power of two; for instance, a 50-Hz
(20 ms) or 60-Hz (16.67 ms) power-frequency clock
would be assigned the value -5 (31.25 ms), while a
1000-Hz (1 ms) crystal-controlled clock would be
assigned the value -9 (1.95 ms).ro INTEGER(-24..24) .1.3.6.1.4.1.171.10.97.2.49.1.1.3 |
myntpSysRootDelayA signed fixed-point number indicating the total
round-trip delay in seconds, to the primary reference
source at the root of the synchronization subnet.ro NTPSignedTimeValue -- Rsyntax OCTET STRING .1.3.6.1.4.1.171.10.97.2.49.1.1.4 |
myntpSysRootDispersionThe maximum error in seconds, relative to the
primary reference source at the root of the
synchronization subnet. Only positive values greater
than zero are possible.ro NTPUnsignedTimeValue -- Rsyntax OCTET STRING .1.3.6.1.4.1.171.10.97.2.49.1.1.5 |
myntpSysRefIdThe reference identifier of the local clock.ro NTPRefId -- Rsyntax OCTET STRING .1.3.6.1.4.1.171.10.97.2.49.1.1.6 |
myntpSysRefTimeThe local time when the local clock was last
updated. If the local clock has never been
synchronized, the value is zero.ro NTPTimeStamp -- Rsyntax OCTET STRING .1.3.6.1.4.1.171.10.97.2.49.1.1.7 |
myNtpMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.97.2.49.2 |
myNtpMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.97.2.49.2.1 |
myNtpMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.171.10.97.2.49.2.2 |
More MIBs from D-Link
Browse all D-LinkMIBs →DGS-1210-28XME-BX
SNMP MIB module
2033 objects→
DGS-1210-12TSME-BX
The DGS-1210-12TSME-BX MIB module provides management capabilities for the D-Link DES-1210-52ME switch, specifically enabling the monitoring and configuration of QinQ (802.1ad) VLAN encapsulation parameters, including inner tag insertion and drop counters for unmatched traffic. This module facilitates precise control over service provider bridging (SPB) operations by exposing metrics related to VLAN tag manipulation and packet discard events on the device's managed ports.
2030 objects→
DGS-1210-28XSME-BX
SNMP MIB module
2016 objects→
DGS-1210-28PME_AX
Standard SNMP MIB module defining data structures for DGS-1210-28PME_AX.
1942 objects→
DGS-1210-28ME_AX
Standard SNMP MIB module defining data structures for DGS-1210-28ME_AX.
1941 objects→
DGS-1210-20ME_AX
Standard SNMP MIB module defining data structures for DGS-1210-20ME_AX.
1941 objects→