MX25-OPT-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
121
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
121 total| Object Name |
|---|
codex OBJECT IDENTIFIER .1.3.6.1.4.1.449 |
RFC1155-SMI Unknown .1.3.6.1.4.1.449 |
cdxProductSpecific OBJECT IDENTIFIER .1.3.6.1.4.1.449.2 |
cdx6500 OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1 |
cdx6500Configuration OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2 |
cdx6500CfgProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1 |
cdx6500PCTPortProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1.1 |
cdx6500PPCTMX25PortTables OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1.1.4 |
cdx6500PPCTMX25PortTableAll of the common configuration parameters relevant
to the MX.25 port table. SEQUENCE OF Cdx6500PPCTMX25PortEntry .1.3.6.1.4.1.449.2.1.2.1.1.4.1 |
cdx6500PPCTMX25PortEntryA row of MX.25 Port configuration parameters. Cdx6500PPCTMX25PortEntry .1.3.6.1.4.1.449.2.1.2.1.1.4.1.1 |
cdx6500mx25pCfgPortNumMX25 Port Number.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.4.1.1.1 |
cdx6500mx25pSubTypeThis is the mode in which this MX25 port will run.
newvalMaster : same functionality as 'master', new
enumeration added for RFC1155 compatibility.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.4.1.1.2 |
cdx6500PPCTMX25MPortTableAll of the configuration parameters relevant
to the MX.25 Master port table. SEQUENCE OF Cdx6500PPCTMX25MPortEntry .1.3.6.1.4.1.449.2.1.2.1.1.4.2 |
cdx6500PPCTMX25MPortEntryA row of MX.25 Master Port configuration parameters. Cdx6500PPCTMX25MPortEntry .1.3.6.1.4.1.449.2.1.2.1.1.4.2.1 |
cdx6500mx25mpCfgPortNumMX25 Port Number.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.1 |
cdx6500mx25mpSubTypeThis is the mode in which this MX25 port will run.
newvalMaster : same functionality as 'master', new
enumeration added for RFC1155 compatibility.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.2 |
cdx6500mx25mpClockSourceint - internal clock source.
ext - external clock source.
newvalInt - same functionality as 'int', new
enumeration added for RFc1155 compatibility.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.3 |
cdx6500mx25mpClockSpeedThis is the speed of the port in bits per second, when using
internal clocking.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.4 |
cdx6500mx25mpStationCntThe number of slave stations on the MX25 line.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.5 |
cdx6500mx25mpPollTimerWorst case delay for a slave to respond to a poll frame
sent by the master, including modem turn around time, etc.
Value in 10ths of second ( 30 = 3.0 seconds ).ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.6 |
cdx6500mx25mpPollPeriodTime in milliseconds between polls when no data is exchanged.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.7 |
cdx6500mx25mpTriesMaximum number of attempts to complete a transmission.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.8 |
cdx6500mx25mpRestartTimerRestart-Request timeout timer in seconds. If timer expires,
request is sent again.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.9 |
cdx6500mx25mpResetTimerReset-Request timeout timer in seconds. If timer expires,
request is sent again.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.10 |
cdx6500mx25mpCallTimerCall-Request timeout timer in seconds. If timer expires, call
is cleared.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.11 |
cdx6500mx25mpClearTimerClear-Request timeout timer in seconds. If timer expires,
request is sent again.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.12 |
cdx6500mx25mpPortControlSpecify any of the following port control options:
NONE - no option specified.
MB - raise Pin 22 when the port becomes disabled.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.13 |
cdx6500mx25mpTXEncodingThis is the data encoding used on the MX25 link.
nrz - Non Return to Zero.
nrzi - Non Return to Zero Inverted.
newvalNrz : same functionality as 'nrz', new enumeration
added for RFC1155 compatibility.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.14 |
cdx6500mx25mpElectricalInterfaceTypeSpecify the Electrical Interface Type:
V.24 - V.24 Electrical Interface Type
V.35 - V.35 Electrical Interface Type
V.36 - V.36 Electrical Interface Type
X.21 - X.21 Electrical Interface Type
NONE - Electrically disabledro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.15 |
cdx6500mx25mpV24ElectricalInterfaceOptionSpecify the Pin 22 option:
RI - V.24 uses Pin 22 for Ring Indicator output signal
TM - V.24 uses Pin 22 for Test Mode input signalro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.16 |
cdx6500mx25mpHighSpeedElectricalInterfaceOptionSpecify the cable type:
NONE - V.35/V.36/X.21 DCE with straight through cable
XOVER - V.35/V.36/X.21 DCE with crossover adapter cablero Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.17 |
cdx6500PPCTMX25SPortTableAll of the configuration parameters relevant
to the MX.25 Slave port table. SEQUENCE OF Cdx6500PPCTMX25SPortEntry .1.3.6.1.4.1.449.2.1.2.1.1.4.3 |
cdx6500PPCTMX25SPortEntryA row of MX.25 Slave Port configuration parameters. Cdx6500PPCTMX25SPortEntry .1.3.6.1.4.1.449.2.1.2.1.1.4.3.1 |
cdx6500mx25spCfgPortNumMX25 Port Number.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.1 |
cdx6500mx25spSubTypeThis is the mode in which this MX25 port will run.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.2 |
cdx6500mx25spClockSourceint - internal clock source.
ext - external clock source.
newvalInt - same functionality as 'int', new
enumeration added for RFC1155 compatibility.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.3 |
cdx6500mx25spClockSpeedThis is the speed of the port in bits per second, when using
internal clocking.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.4 |
cdx6500mx25spStationAddressThe station address on the multidrop line.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.5 |
cdx6500mx25spPVCChannelsNumber of logical channels used for Permanent Virtual
Circuits. The total number of PVC and SVC channels on
a link should be kept as small as possible and consistent
with needs. PVC connections must be configured in the PVC
Table.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.6 |
cdx6500mx25spStartingPVCThis is the starting logical channel number for the
Permanent Virtual Circuits on this link. Not used if the
number of PVCs = 0.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.7 |
cdx6500mx25spSVCChannelsNumber of logical channels used in Switched Virtual Circuits.
The total number of PVC and SVC channels on a link should be
kept as small as possible and consistent with needs.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.8 |
cdx6500mx25spStartingSVCThis is the starting logical channel number for the Switched
Virtual Circuits on this link. Not used if the number of
SVCs = 0.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.9 |
cdx6500mx25spPollTimerWorst case delay for a slave to respond to a poll frame
sent by the master, including modem turn around time, etc.
Value in 10ths of second ( 30 = 3.0 seconds ).ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.10 |
cdx6500mx25spTriesMaximum number of attempts to complete a transmission.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.11 |
cdx6500mx25spFrameWinSizeFrame level window size must be set to the same value in
devices at each end of the link.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.12 |
cdx6500mx25spPacketWinSizePacket level window size must be set to the same value in
devices at each end of the link.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.13 |
cdx6500mx25spRestartTimerRestart-Request timeout timer in seconds. If timer expires,
request is sent again.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.14 |
cdx6500mx25spResetTimerReset-Request timeout timer in seconds. If timer expires,
request is sent again.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.15 |
cdx6500mx25spCallTimerCall-Request timeout timer in seconds. If timer expires, call
is cleared.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.16 |
cdx6500mx25spClearTimerClear-Request timeout timer in seconds. If timer expires,
request is sent again.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.17 |
cdx6500mx25spMX25OptionsSelect options on this MX.25 port as follows:
NONE - no option specified.
HOLD - hold calls over link restart.
CUG - check closed user group; otherwise, CUG passes
transparently.
INL - inter-node link. Link goes to another 6500 device.
INLA - set with INL option when an MX.25 link connection is
to a 6500 node using 2.12.04 or earlier.
DELAY - enable Delay and Path trace on this link (link
must connected to Rel. 4.xx node)
Any combination of the above specified by summing
(e.g. HOLD+CUG+. . .).ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.18 |
cdx6500mx25spRCDestinationAll calls entering this port will be routed to the destination
specified in this parameter, irrespective of route selection
table entries. For example, to route calls to port 1, use P1.
To route calls to port 2, station 4, use P2S4.
Blank this field to disable this function.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.19 |
cdx6500mx25spCUGThe port may be a member of up to 8 different Closed User
Groups (CUGs). Each CUG membership must be a two digit number
(except
(e.g. 12,34,56,09,02,03 ).
00-99 - CUG Membershipro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.20 |
cdx6500mx25spBillingRecordsThis controls whether billing (accounting) records will
be created for calls on this port.
newvalOff - same functionality as 'off', new enumeration
added for RFC1155 compatibility.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.21 |
cdx6500mx25spPortControlSpecify any of the following port control options:
NONE - no option specified.
MB - raise Pin 22 when the port becomes disabled.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.22 |
cdx6500mx25spTXEncodingThis is the data encoding used on the MX25 link.
nrz - Non Return to Zero.
nrzi - Non Return to Zero Inverted.
newvalNrz - same functionality as 'nrz', new enumeration
added for RFC1155 compatibility.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.23 |
cdx6500mx25spUpperQueueThis is the maximum number of data packets a channel on
this port will queue for transmission before invoking flow
control to the attached channel.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.24 |
cdx6500mx25spLowerQueueThis is the number of data packets a channel on this port will
have queued for transmission when it releases flow control to
the attached channel.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.25 |
cdx6500mx25spElectricalInterfaceTypeSpecify the Electrical Interface Type:
V.24 - V.24 Electrical Interface Type
V.35 - V.35 Electrical Interface Type
V.36 - V.36 Electrical Interface Type
X.21 - X.21 Electrical Interface Type
NONE - Electrically disabledro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.26 |
cdx6500mx25spV24ElectricalInterfaceOptionSpecify the Pin 22 option:
RI - V.24 uses Pin 22 for Ring Indicator output signal
TM - V.24 uses Pin 22 for Test Mode input signalro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.27 |
cdx6500mx25spHighSpeedElectricalInterfaceOptionSpecify the cable type:
NONE - V.35/V.36/X.21 DCE with straight through cable
XOVER - V.35/V.36/X.21 DCE with crossover adapter cablero Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.28 |
cdx6500PCTStationProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1.3 |
cdx6500SPCTMX25StationTableAll of the configuration parameters relevant
to the MX.25 station table. SEQUENCE OF Cdx6500SPCTMX25StationEntry .1.3.6.1.4.1.449.2.1.2.1.3.1 |
cdx6500SPCTMX25StationEntryA row of MX.25 station configuration parameters. Cdx6500SPCTMX25StationEntry .1.3.6.1.4.1.449.2.1.2.1.3.1.1 |
cdx6500mx25sCfgPortNumMX25 Port Number.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.3.1.1.1 |
cdx6500mx25sCfgStationNumThe number of the controller on the multidrop line.
Also used for routing purposes.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.3.1.1.2 |
cdx6500mx25sStationAddressThe station address on the multidrop line.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.3.1.1.3 |
cdx6500mx25sPVCChannelsNumber of logical channels used for Permanent Virtual Circuits.
The total number of PVC and SVC channels on a link should be
kept as small as possible and consistent with needs.
PVC connections must be configured in the PVC Table.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.3.1.1.4 |
cdx6500mx25sStartingPVCThis is the starting logical channel number for the
Permanent Virtual Circuits on this link. Not used if
the number of PVCs = 0.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.3.1.1.5 |
cdx6500mx25sSVCChannelsNumber of logical channels used in Switched Virtual Circuits.
The total number of PVC and SVC channels on a link should be
kept as small as possible and consistent with needs.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.3.1.1.6 |
cdx6500mx25sStartingSVCThis is the starting logical channel number for the Switched
Virtual Circuits on this link. Not used if the number of
SVCs = 0.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.3.1.1.7 |
cdx6500mx25sFrameWinSizeFrame level window size must be set to the same value in
devices at each end of the link.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.3.1.1.8 |
cdx6500mx25sPacketWinSizePacket level window size must be set to the same value in
devices at each end of the link.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.3.1.1.9 |
cdx6500mx25sMX25OptionsSelect options on this MX.25 port as follows:
NONE - no option specified
HOLD - hold calls over link restart
CUG - check closed user group; otherwise, CUG passes
transparently
INL - inter-node link. Link goes to another 6500 device
INLA - set with INL option when an MX.25 link connection is to
a 6500 node using 2.12.04 or earlier
Any combination of the above specified by summing
(e.g. HOLD+CUG+. . .).ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.3.1.1.10 |
cdx6500mx25sRCDestinationAll calls entering this port will be routed to the destination
specified in this parameter, irrespective of route selection
table entries. For example, to route calls to port 1, use P1.
To route calls to port 2, station 4, use P2S4.
Blank this field to disable this function.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.3.1.1.11 |
cdx6500mx25sCUGThe port may be a member of up to 8 different Closed User
Groups (CUGs). Each CUG membership must be a two digit number
(except
(e.g. 12,34,56,09,02,03).
00-99 - CUG Membershipro DisplayString .1.3.6.1.4.1.449.2.1.2.1.3.1.1.12 |
cdx6500mx25sBillingRecordsThis controls whether billing (accounting) records will
be created for calls on this port.
newvalOff - same functionality as 'off', new enumeration
added for RFc1155 compatibility.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.3.1.1.13 |
cdx6500mx25sUpperQueueThis is the maximum number of data packets a channel on
this port will queue for transmission before invoking flow
control to the attached channel.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.3.1.1.14 |
cdx6500mx25sLowerQueueThis is the number of data packets a channel on this port will
have queued for transmission when it releases flow control to
the attached channel.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.3.1.1.15 |
cdx6500Statistics OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3 |
cdx6500StatProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1 |
cdx6500PSTPortProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1.1 |
cdx6500PPSTMX25PortTableAll of the statistics parameters relevant
to the MX25 Port table. SEQUENCE OF Cdx6500PPSTMX25PortEntry .1.3.6.1.4.1.449.2.1.3.1.1.4 |
cdx6500PPSTMX25PortEntryA row of MX25 Port statistics parameters. Cdx6500PPSTMX25PortEntry .1.3.6.1.4.1.449.2.1.3.1.1.4.1 |
cdx6500mx25pStatsPortNumNumber of the port.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.4.1.1 |
cdx6500mx25pPortStatusStatus of this port :
Up - Port is active.
Down - Port Is inactive.
Disabled - An operator has disabled the port.
Busy Out - an operator has busied out the port.ro DisplayString .1.3.6.1.4.1.449.2.1.3.1.1.4.1.2 |
cdx6500mx25pPortSpeedThis is the speed of the port when Clock=Int; this is the
detected clock speed if Clock=Ext. If Port Speed is 0,
Clock=Ext but clocking is not being received from attached
device.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.4.1.3 |
cdx6500mx25pCharInTotalNumber of characters received by the port since the last node,
port, or statistics reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.4.1.4 |
cdx6500mx25pCharOutTotalNumber of characters sent by the port since the last node,
port, or statistics reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.4.1.5 |
cdx6500mx25pCharsInPerSecSummary of the characters being received over the port.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.4.1.6 |
cdx6500mx25pCharsOutPerSecSummary of the characters being sent over the port.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.4.1.7 |
cdx6500mx25pFrameInTotalNumber of frames received by the port since the last node,
port, or statistics reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.4.1.8 |
cdx6500mx25pFrameOutTotalNumber of frames sent by the port since the last node,
port, or statistics reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.4.1.9 |
cdx6500mx25pFramesInPerSecSummary of the frames being received over the port.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.4.1.10 |
cdx6500mx25pFramesOutPerSecSummary of the frames being sent over the port.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.4.1.11 |
cdx6500PSTStationProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1.3 |
cdx6500SPSTMX25StationTableAll of the statistics parameters relevant
to the MX25 Station table. SEQUENCE OF Cdx6500SPSTMX25StationEntry .1.3.6.1.4.1.449.2.1.3.1.3.1 |
cdx6500SPSTMX25StationEntryA row of MX25 Station statistics parameters. Cdx6500SPSTMX25StationEntry .1.3.6.1.4.1.449.2.1.3.1.3.1.1 |
cdx6500mx25sStatsPortNumNumber of the port.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.1.1.1 |
cdx6500mx25sStatsStationNumStation reference number.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.1.1.2 |
cdx6500mx25sStatsStnAddrConfigured station address.ro DisplayString .1.3.6.1.4.1.449.2.1.3.1.3.1.1.3 |
cdx6500mx25sCharInTotalNumber of characters received by the port since the last node,
port, or statistics resetro Counter .1.3.6.1.4.1.449.2.1.3.1.3.1.1.4 |
cdx6500mx25sCharOutTotalNumber of characters sent by the port since the last node,
port, or statistics resetro Counter .1.3.6.1.4.1.449.2.1.3.1.3.1.1.5 |
cdx6500mx25sCharsInPerSecSummary of the characters being received over the port.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.1.1.6 |
cdx6500mx25sCharsOutPerSecSummary of the characters being sent over the port.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.1.1.7 |
cdx6500mx25sFrameInTotalNumber of frames received by the port since the last node,
port, or statistics reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.1.1.8 |
cdx6500mx25sFrameOutTotalNumber of frames sent by the port since the last node,
port, or statistics reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.1.1.9 |
cdx6500mx25sFramesInPerSecSummary of the frames being received over the port.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.1.1.10 |
cdx6500mx25sFramesOutPerSecSummary of the frames being sent over the port.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.1.1.11 |
cdx6500mx25sCallCountCurrent number of calls.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.1.1.12 |
cdx6500Controls OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.4 |
cdx6500ContMX25 OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.4.6 |
cdx6500ContMX25StationTableAll of the control parameters relevant
to the MX25 Station table. SEQUENCE OF Cdx6500ContMX25StationEntry .1.3.6.1.4.1.449.2.1.4.6.1 |
cdx6500ContMX25StationEntryA row of MX25 Station Control parameters. Cdx6500ContMX25StationEntry .1.3.6.1.4.1.449.2.1.4.6.1.1 |
cdx6500mx25sContPortNumMX25 Port Number. INTEGER .1.3.6.1.4.1.449.2.1.4.6.1.1.1 |
cdx6500mx25sContStationNumMX25 Station Number. INTEGER .1.3.6.1.4.1.449.2.1.4.6.1.1.2 |
cdx6500mx25sContBootStationBoots the specified MX25 station.
boot - Boot Station.
noBoot - Do not boot Station.rw Enumeration .1.3.6.1.4.1.449.2.1.4.6.1.1.3 |
cdx6500mx25sContDisableStationDisables the specified MX25 station.
disable - Disable Station.
noDisable - Do not disable Station.rw Enumeration .1.3.6.1.4.1.449.2.1.4.6.1.1.4 |
cdx6500mx25sContEnableStationEnables the specified MX25 station.
enable - Enable Station.
noEnable - Do not enable Station.rw Enumeration .1.3.6.1.4.1.449.2.1.4.6.1.1.5 |
cdx6500mx25sContBusyOutStationBusy outs the specified MX25 station.
busyOut - Busyout Station.
noBusyOut - Do not busyout Station.rw Enumeration .1.3.6.1.4.1.449.2.1.4.6.1.1.6 |
cdx6500mx25sContResetStnStatsBusy outs the specified MX25 station.
reset - Reset Station Statistics.
noReset - Do not reset Station Statistics.rw Enumeration .1.3.6.1.4.1.449.2.1.4.6.1.1.7 |