MSTP-MIB
The MIB module for managing MSTP.
Main OID:
swMSTPMIB.1.3.6.1.4.1.171.12.15
66
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
66 total| Object Name |
|---|
swMSTPMIBThe MIB module for managing MSTP. MODULE-IDENTITY .1.3.6.1.4.1.171.12.15 |
swMSTPGblMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.12.15.1 |
swMSTPStpAdminStateThis object indicates the spanning tree state of the bridge.rw Enumeration .1.3.6.1.4.1.171.12.15.1.1 |
swMSTPStpVersionThe version of Spanning Tree Protocol the bridge is currently running.rw Enumeration .1.3.6.1.4.1.171.12.15.1.2 |
swMSTPStpMaxAgeThe value that all bridges use for MaxAge when this bridge is acting as the root. Note that the range for this parameter is related to the value of StpForwardDelay and PortAdminHelloTime. MaxAge <= 2(ForwardDelay - 1);MaxAge >= 2(HelloTime + 1) The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.rw INTEGER .1.3.6.1.4.1.171.12.15.1.3 |
swMSTPStpHelloTimeThe value is used for HelloTime when this bridge is acting in RSTP or STP mode. Only in RSTP or STP mode can read/write this value.rw INTEGER .1.3.6.1.4.1.171.12.15.1.4 |
swMSTPStpForwardDelayThis value, controls how long a port changes its spanning state from blocking to learning state and from learning to forwarding state. Note that the range for this parameter is related to MaxAgerw INTEGER .1.3.6.1.4.1.171.12.15.1.5 |
swMSTPStpMaxHopsThis value applies to all Spanning Trees within an MST Region for which the Bridge is the Regional Root.rw INTEGER .1.3.6.1.4.1.171.12.15.1.6 |
swMSTPStpTxHoldCountThe value used by the Port Transmit state machine to limit the maximum transmission rate.rw INTEGER .1.3.6.1.4.1.171.12.15.1.7 |
swMSTPStpForwardBPDUThe enabled/disabled status is used to forward BPDU to non stp port.rw Enumeration .1.3.6.1.4.1.171.12.15.1.8 |
swMSTPStpLBDThe enabled/disabled status is used to Loop-back prevention.rw Enumeration .1.3.6.1.4.1.171.12.15.1.9 |
swMSTPStpLBDRecoverTimeThe period of time(in second) on which STP module keeps checking the BPDU loop status, The valid range is 60 to 1000000 . If set this value from 1 to 59 will get 'bad value' return code. The value of zero is a special value which means to disable the auto-recovery mechanism for LBD feature.rw INTEGER .1.3.6.1.4.1.171.12.15.1.10 |
swMSTPCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.171.12.15.2 |
swMSTPNameThe object indicates the name of MST Configuration Identication.rw OCTET STRING .1.3.6.1.4.1.171.12.15.2.1 |
swMSTPRevisionLevelThe object indicates the revision level of the MST Configuration Identification.rw INTEGER .1.3.6.1.4.1.171.12.15.2.2 |
swMSTPInstanceCtrlTableA table that contains MSTP instance information. SEQUENCE OF SwMSTPInstanceCtrlEntry .1.3.6.1.4.1.171.12.15.2.3 |
swMSTPInstanceCtrlEntry. SwMSTPInstanceCtrlEntry .1.3.6.1.4.1.171.12.15.2.3.1 |
swMSTPInstIdThis object indicates the specific instance. An MSTP Instance Id(MSTID) of zero is used to identify the CIST.ro INTEGER .1.3.6.1.4.1.171.12.15.2.3.1.1 |
swMSTPInstVlanRangeList1to64This object indicates the VLAN range (1-512) that belongs to the instance.rw OCTET STRING .1.3.6.1.4.1.171.12.15.2.3.1.2 |
swMSTPInstVlanRangeList65to128This object indicates the VLAN range (513-1024) that belongs to the instance.rw OCTET STRING .1.3.6.1.4.1.171.12.15.2.3.1.3 |
swMSTPInstVlanRangeList129to192This object indicates the VLAN range (1025-1536) that belongs to the instance.rw OCTET STRING .1.3.6.1.4.1.171.12.15.2.3.1.4 |
swMSTPInstVlanRangeList193to256This object indicates the VLAN range(1537-2048) that belongs to the instance.rw OCTET STRING .1.3.6.1.4.1.171.12.15.2.3.1.5 |
swMSTPInstVlanRangeList257to320This object indicates the VLAN range (2049-2560) that belongs to the instance.rw OCTET STRING .1.3.6.1.4.1.171.12.15.2.3.1.6 |
swMSTPInstVlanRangeList321to384This object indicates the VLAN range (2561-3072) that belongs to the instance.rw OCTET STRING .1.3.6.1.4.1.171.12.15.2.3.1.7 |
swMSTPInstVlanRangeList385to448This object indicates the VLAN range (3073-3584) that belongs to the instance.rw OCTET STRING .1.3.6.1.4.1.171.12.15.2.3.1.8 |
swMSTPInstVlanRangeList449to512This object indicates the VLAN range (3585-4096) that belongs to the instance.rw OCTET STRING .1.3.6.1.4.1.171.12.15.2.3.1.9 |
swMSTPInstTypeThis object indicates the type of instance.ro Enumeration .1.3.6.1.4.1.171.12.15.2.3.1.10 |
swMSTPInstStatusThe instance state that could be enabled/disabled.ro Enumeration .1.3.6.1.4.1.171.12.15.2.3.1.11 |
swMSTPInstPriorityThe priority of the instance. The priority must be dividable by 4096rw INTEGER .1.3.6.1.4.1.171.12.15.2.3.1.12 |
swMSTPInstDesignatedRootBridgeThe bridge identifier of the CIST. For MST instance, this object is unused.ro BridgeId .1.3.6.1.4.1.171.12.15.2.3.1.13 |
swMSTPInstExternalRootCostThe path cost between MST Regions from the transmitting Bridge to the CIST Root. For MST instance this object is unused.ro INTEGER .1.3.6.1.4.1.171.12.15.2.3.1.14 |
swMSTPInstRegionalRootBridgeFor CIST, Regional Root Identifier is the Bridge Identifier of the single bridge in a Region whose CIST Root Port is a Boundary Port, or the Bridge Identifier of the CIST Root if that is within the Region; For MSTI,MSTI Regional Root Identifier is the Bridge Identifier of the MSTI Regional Root for this particular MSTI in this MST Region; The Regional Root Bridge of this instance.ro BridgeId .1.3.6.1.4.1.171.12.15.2.3.1.15 |
swMSTPInstInternalRootCostFor CIST, the internal path cost is the path cost to the CIST Regional Root; For MSTI, the internal path cost is the path cost to the MSTI Regional Root for this particular MSTI in this MST Regionro INTEGER .1.3.6.1.4.1.171.12.15.2.3.1.16 |
swMSTPInstDesignatedBridgeThe Bridge Identifier for the transmitting bridge for this CIST or MSTIro BridgeId .1.3.6.1.4.1.171.12.15.2.3.1.17 |
swMSTPInstRootPortThe port number of the port which offers the lowest cost path from this bridge to the CIST or MSTI root bridge.ro INTEGER .1.3.6.1.4.1.171.12.15.2.3.1.18 |
swMSTPInstMaxAgeThe maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.ro INTEGER .1.3.6.1.4.1.171.12.15.2.3.1.19 |
swMSTPInstForwardDelayThis value, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database.ro INTEGER .1.3.6.1.4.1.171.12.15.2.3.1.20 |
swMSTPInstLastTopologyChangeThe time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.171.12.15.2.3.1.21 |
swMSTPInstTopChangesCountThe total number of topology changes detected by this bridge since the management entity was last reset or initialized.ro Counter .1.3.6.1.4.1.171.12.15.2.3.1.22 |
swMSTPInstRemainHops.ro INTEGER .1.3.6.1.4.1.171.12.15.2.3.1.23 |
swMSTPInstRowStatusThis object indicates the RowStatus of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.12.15.2.3.1.24 |
swMSTPPortTableA table that contains port-specific information for the Spanning Tree Protocol. SEQUENCE OF SwMSTPPortEntry .1.3.6.1.4.1.171.12.15.2.4 |
swMSTPPortEntryA list of information maintained by every port about the Spanning Tree Protocol state for that port. SwMSTPPortEntry .1.3.6.1.4.1.171.12.15.2.4.1 |
swMSTPPortThe port number of the port for this entry.ro INTEGER .1.3.6.1.4.1.171.12.15.2.4.1.1 |
swMSTPPortOperHelloTimeIs the actual value of the hello time.ro INTEGER .1.3.6.1.4.1.171.12.15.2.4.1.2 |
swMSTPPortAdminHelloTimeThe amount of time between the transmission of BPDU by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second.rw INTEGER .1.3.6.1.4.1.171.12.15.2.4.1.3 |
swMSTPSTPPortEnableThe enabled/disabled status of the port.rw Enumeration .1.3.6.1.4.1.171.12.15.2.4.1.4 |
swMSTPPortExternalPathCostThe contribution of this port to the path cost of paths towards the CIST root which include this port.rw INTEGER .1.3.6.1.4.1.171.12.15.2.4.1.5 |
swMSTPPortMigrationWhen operating in MSTP mode or RSTP mode, writing TRUE(1) to this object forces this port to transmit MST BPDUs. Any other operation on this object has no effect and it always returns FALSE(2) when read.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.12.15.2.4.1.6 |
swMSTPPortAdminEdgePortThe value of the Edge Port parameter. A value of TRUE indicates that this port should be assumed as an edge-port and a value of FALSE indicates that this port should be assumed as a non-edge-portrw Enumeration .1.3.6.1.4.1.171.12.15.2.4.1.7 |
swMSTPPortOperEdgePortIt is the acuture value of edge port statusro Enumeration .1.3.6.1.4.1.171.12.15.2.4.1.8 |
swMSTPPortAdminP2PThe point-to-point status of the LAN segment attached to this port.rw Enumeration .1.3.6.1.4.1.171.12.15.2.4.1.9 |
swMSTPPortOperP2PIt is the acture value of P2P status.ro Enumeration .1.3.6.1.4.1.171.12.15.2.4.1.10 |
swMSTPPortLBDThe enabled/disabled status is used to Loop-back prevention attached to this port.rw Enumeration .1.3.6.1.4.1.171.12.15.2.4.1.11 |
swMSTPPortBPDUFilteringThe enabled/disabled status is used to BPDU Filtering attached to this port.rw Enumeration .1.3.6.1.4.1.171.12.15.2.4.1.12 |
swMSTPPortRestrictedRoleIf TRUE, causes the port not to be selected as Root Port for the CIST or any MSTI, even it has the best spanning tree priority vector.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.12.15.2.4.1.13 |
swMSTPPortRestrictedTCNIf TRUE, causes the port not to propagate received topology change notifications and topology changes to other Ports.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.12.15.2.4.1.14 |
swMSTPMstPortTableA table that contains port-specific information for the MST Protocol. SEQUENCE OF SwMSTPMstPortEntry .1.3.6.1.4.1.171.12.15.2.5 |
swMSTPMstPortEntryA list of information maintained by every port about the MST state for that port. SwMSTPMstPortEntry .1.3.6.1.4.1.171.12.15.2.5.1 |
swMSTPMstPortThe port number of the port for this entry.ro INTEGER .1.3.6.1.4.1.171.12.15.2.5.1.1 |
swMSTPMstPortInsIDThis object indicates the MSTP Instance Id(MSTID).ro INTEGER .1.3.6.1.4.1.171.12.15.2.5.1.2 |
swMSTPMstPortDesignatedBridge.ro BridgeId .1.3.6.1.4.1.171.12.15.2.5.1.3 |
swMSTPMstPortInternalPathCostThis is the value of this port to the path cost of paths towards the MSTI root.rw INTEGER .1.3.6.1.4.1.171.12.15.2.5.1.4 |
swMSTPMstPortPriorityThe value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID..rw INTEGER .1.3.6.1.4.1.171.12.15.2.5.1.5 |
swMSTPMstPortStatusWhen the port Enable state is enabled, the port's current state as defined by application of the Spanning Tree Protocol. If the PortEnable is disabled, the the port status will be no-stp-enabled(7); If the port is in error disabled status, the port status will be err-disable(8)ro Enumeration .1.3.6.1.4.1.171.12.15.2.5.1.6 |
swMSTPMstPortRoleWhen the port Enable state is enabled, the port's current port role as defined by application of the Spanning Tree Protocol. If the Port Enable state is disabled, the the port role will be nonstp(5)ro Enumeration .1.3.6.1.4.1.171.12.15.2.5.1.7 |