MRV-IR-HDAM-MIB
AI MIB Summary
The MRV-IR-HDAM-MIB module enables SNMP-based monitoring of alarm states and fault conditions on MRV LX HDAM (High-Density Access Module) hardware. It provides specific visibility into hardware integrity, port status, and environmental alerts for these high-density access aggregation devices.
This is the MRV LX HDAM Alarm MIB module.
Main OID:
irHdamMib.1.3.6.1.4.1.33.100.4
73
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
73 total| Object Name |
|---|
mrvBpd OBJECT IDENTIFIER .1.3.6.1.4.1.33 |
mrvLx OBJECT IDENTIFIER .1.3.6.1.4.1.33.100 |
irHdamMibThis is the MRV LX HDAM Alarm MIB module. MODULE-IDENTITY .1.3.6.1.4.1.33.100.4 |
irHdam OBJECT IDENTIFIER .1.3.6.1.4.1.33.100.4.1 |
irHdamUnitTableA list of hdam unit entries. SEQUENCE OF IrHdamUnitEntry .1.3.6.1.4.1.33.100.4.1.1 |
irHdamUnitEntryAn hdam unit entry. IrHdamUnitEntry .1.3.6.1.4.1.33.100.4.1.1.1 |
irHdamUnitPortIndexThe port index to which this hdam unit is connected.ro INTEGER .1.3.6.1.4.1.33.100.4.1.1.1.1 |
irHdamFwVersionThe HDAM unit firmware version string.ro DisplayString .1.3.6.1.4.1.33.100.4.1.1.1.2 |
irHdamConnectStatusThe HDAM unit connection status.ro Enumeration .1.3.6.1.4.1.33.100.4.1.1.1.3 |
irHdamPowerTypeThe type of power used by the hdam device.ro Enumeration .1.3.6.1.4.1.33.100.4.1.1.1.4 |
irHdamActionThis object is used to perform an action on the HDAM unit. A read of this object always returns the value other(1). Setting this object to reset(2) causes the unit to be reset.rw Enumeration .1.3.6.1.4.1.33.100.4.1.1.1.5 |
irHdamModuleTableA list of hdam module entries. SEQUENCE OF IrHdamModuleEntry .1.3.6.1.4.1.33.100.4.1.2 |
irHdamModuleEntryAn hdam module entry. IrHdamModuleEntry .1.3.6.1.4.1.33.100.4.1.2.1 |
irHdamPortIndexThe port index to which this hdam unit is connected.ro INTEGER .1.3.6.1.4.1.33.100.4.1.2.1.1 |
irHdamSlotIndexThe slot index for this module entry.ro INTEGER .1.3.6.1.4.1.33.100.4.1.2.1.2 |
irHdamModuleTypeThe type of module in the slot.ro IrHdamModuleType .1.3.6.1.4.1.33.100.4.1.2.1.3 |
irHdamPowerSupplyTableA list of hdam power supply entries. SEQUENCE OF IrHdamPowerSupplyEntry .1.3.6.1.4.1.33.100.4.1.3 |
irHdamPowerSupplyEntryAn hdam power supply entry. IrHdamPowerSupplyEntry .1.3.6.1.4.1.33.100.4.1.3.1 |
irHdamPowerPortIndexThe index of the port to which the hdam unit is attached.ro INTEGER .1.3.6.1.4.1.33.100.4.1.3.1.1 |
irHdamPowerIndexThe index of the hdam power unit.ro INTEGER .1.3.6.1.4.1.33.100.4.1.3.1.2 |
irHdamPowerUnitPresentThis indicates if the power unit is present or not.ro Enumeration .1.3.6.1.4.1.33.100.4.1.3.1.3 |
irHdamPowerInputStatusThis indicates if the power unit is plugged into a power source.ro Enumeration .1.3.6.1.4.1.33.100.4.1.3.1.4 |
irHdamPowerOutputStatusThis indicates the status of the internal power feed to the device components.ro Enumeration .1.3.6.1.4.1.33.100.4.1.3.1.5 |
irHdamPowerStatusThe overall status of the power unit.ro Enumeration .1.3.6.1.4.1.33.100.4.1.3.1.6 |
irHdamAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.33.100.4.2 |
irAlarmConfigTableA list of alarm config entries. SEQUENCE OF IrAlarmConfigEntry .1.3.6.1.4.1.33.100.4.2.1 |
irAlarmConfigEntryAn hdam alarm config entry. IrAlarmConfigEntry .1.3.6.1.4.1.33.100.4.2.1.1 |
irAlarmPortIndexThe port index on which the alarm unit is attached.ro INTEGER .1.3.6.1.4.1.33.100.4.2.1.1.1 |
irAlarmSlotIndexThe slot in the alarm unit which identifies this module.ro INTEGER .1.3.6.1.4.1.33.100.4.2.1.1.2 |
irAlarmPointIndexAn integer which uniquely identifies an alarm on this module.ro INTEGER .1.3.6.1.4.1.33.100.4.2.1.1.3 |
irAlarmNameThe name assigned to the alarm.rw DisplayString .1.3.6.1.4.1.33.100.4.2.1.1.4 |
irAlarmContactStateThe current state of the alarm contacts.ro IrContactState .1.3.6.1.4.1.33.100.4.2.1.1.5 |
irAlarmContactFaultStateThe contact state (open or closed) which indicates the fault condition. If the value of this object and irAlarmContactState is the same, then the alarm has been triggered.rw IrContactState .1.3.6.1.4.1.33.100.4.2.1.1.6 |
irAlarmDebounceIntervalThe number of seconds the alarm must be in the fault state before it is considered valid.rw INTEGER .1.3.6.1.4.1.33.100.4.2.1.1.7 |
irAlarmAudibleStatusThis indicates whether the audible alarm on the unit will sound when this alarm is generated.rw Enumeration .1.3.6.1.4.1.33.100.4.2.1.1.8 |
irAlarmTrapStatusThis indicates whether an snmp trap will be generated when this alarm is generated.rw Enumeration .1.3.6.1.4.1.33.100.4.2.1.1.9 |
irAlarmTrapSeverityThe trap severity assigned to this alarm. This value will be sent when an alarm fires and an snmp trap is generated.rw TrapSeverity .1.3.6.1.4.1.33.100.4.2.1.1.10 |
irAlarmCountThe number of times the alarm has been generated since the unit was started.ro Counter32 .1.3.6.1.4.1.33.100.4.2.1.1.11 |
irAlarmTimestampA timestamp string indicating the time the last alarm was generated. A null string indicates that the alarm has not been generated.ro DisplayString .1.3.6.1.4.1.33.100.4.2.1.1.12 |
irAlarmDescriptionA user configurable alarm description string.rw DisplayString .1.3.6.1.4.1.33.100.4.2.1.1.13 |
irHdamControl OBJECT IDENTIFIER .1.3.6.1.4.1.33.100.4.3 |
irControlConfigTableA list of control config entries. SEQUENCE OF IrControlConfigEntry .1.3.6.1.4.1.33.100.4.3.1 |
irControlConfigEntryA control config entry. IrControlConfigEntry .1.3.6.1.4.1.33.100.4.3.1.1 |
irControlPortIndexThe port index on which the control unit is attached.ro INTEGER .1.3.6.1.4.1.33.100.4.3.1.1.1 |
irControlSlotIndexThe slot in the control unit which identifies this module.ro INTEGER .1.3.6.1.4.1.33.100.4.3.1.1.2 |
irControlPointIndexAn integer which uniquely identifies a control on this module.ro INTEGER .1.3.6.1.4.1.33.100.4.3.1.1.3 |
irControlNameThe name assigned to the control.rw DisplayString .1.3.6.1.4.1.33.100.4.3.1.1.4 |
irControlStateThe current value of the control state.rw IrContactState .1.3.6.1.4.1.33.100.4.3.1.1.5 |
irControlActiveStateThe value of the control state that activates the attached device.rw IrContactState .1.3.6.1.4.1.33.100.4.3.1.1.6 |
irControlDescriptionA user configurable control description string.rw DisplayString .1.3.6.1.4.1.33.100.4.3.1.1.7 |
irHdamAnalog OBJECT IDENTIFIER .1.3.6.1.4.1.33.100.4.4 |
irAnalogConfigTableA list of analog loop config entries. SEQUENCE OF IrAnalogConfigEntry .1.3.6.1.4.1.33.100.4.4.1 |
irAnalogConfigEntryAn analog loop config entry. IrAnalogConfigEntry .1.3.6.1.4.1.33.100.4.4.1.1 |
irAnalogPortIndexThe port index on which the analog unit is attached.ro INTEGER .1.3.6.1.4.1.33.100.4.4.1.1.1 |
irAnalogSlotIndexThe slot in the analog unit which identifies this module.ro INTEGER .1.3.6.1.4.1.33.100.4.4.1.1.2 |
irAnalogPointIndexAn integer which uniquely identifies an analog point on this module.ro INTEGER .1.3.6.1.4.1.33.100.4.4.1.1.3 |
irAnalogNameThe name assigned to the analog.rw DisplayString .1.3.6.1.4.1.33.100.4.4.1.1.4 |
irAnalogDescriptionA user configurable analog description string.rw DisplayString .1.3.6.1.4.1.33.100.4.4.1.1.5 |
irAnalogStatusThe status of the analog point.rw IrAnalogStatus .1.3.6.1.4.1.33.100.4.4.1.1.6 |
irAnalogValueThe current analog sensor reading in milliAmps.ro DisplayString .1.3.6.1.4.1.33.100.4.4.1.1.7 |
irAnalogCalValueThe current analog sensor calibrated value.ro DisplayString .1.3.6.1.4.1.33.100.4.4.1.1.8 |
irAnalogCalMinValueThe calibration value assigned to the minimum sensor reading.rw DisplayString .1.3.6.1.4.1.33.100.4.4.1.1.9 |
irAnalogCalMaxValueThe calibration value assigned to the maximum analog sensor reading.rw DisplayString .1.3.6.1.4.1.33.100.4.4.1.1.10 |
irAnalogCalMarginThe calibration margin value. This will be added to the calibrated analog sensor value.rw DisplayString .1.3.6.1.4.1.33.100.4.4.1.1.11 |
irAnalogCalUnitsA user defined string describing the calibrated units for the analog sensor.rw DisplayString .1.3.6.1.4.1.33.100.4.4.1.1.12 |
irAnalogThresholdHighThe analog sensor high threshold value. A value of -0 indicates threshold is not configured.rw DisplayString .1.3.6.1.4.1.33.100.4.4.1.1.13 |
irAnalogThresholdLowThe analog sensor low threshold value. A value of -0 indicates threshold is not configured.rw DisplayString .1.3.6.1.4.1.33.100.4.4.1.1.14 |
irAnalogThresholdSeverityThe severity value of the analog sensor assigned to the low threshold. This value will be sent in the threshold trap.rw TrapSeverity .1.3.6.1.4.1.33.100.4.4.1.1.15 |
irAnalogThresholdHysteresisAfter crossing a threshold, the delta by which the caliberated value must drop within the normal range before the alarm condition is cleared (i.e. a cleared alarm is generated).rw DisplayString .1.3.6.1.4.1.33.100.4.4.1.1.16 |
irAnalogThresholdHighAlarmCountThe number of times the analog sensor high threshold has been crossed since the unit was started.ro Counter32 .1.3.6.1.4.1.33.100.4.4.1.1.17 |
irAnalogThresholdLowAlarmCountThe number of times the analog sensor low threshold has been crossed since the unit was started.ro Counter32 .1.3.6.1.4.1.33.100.4.4.1.1.18 |
irAnalogThresholdHighTimestampA timestamp string indicating the time the analog sensor last crossed the high threshold. A null string indicates that the alarm has not been crossed.ro DisplayString .1.3.6.1.4.1.33.100.4.4.1.1.19 |
irAnalogThresholdLowTimestampA timestamp string indicating the time the analog sensor last crossed the low threshold. A null string indicates that the alarm has not been crossed.ro DisplayString .1.3.6.1.4.1.33.100.4.4.1.1.20 |