MRV-IR-CHAR-MIB
AI MIB Summary
The MRV-IR-CHAR-MIB module enables monitoring and management of character-based terminal interface parameters, including baud rates, parity settings, and flow control configurations, on MRV LX series networking equipment.
This is the MRV LX Character MIB module.
Main OID:
irCharMib.1.3.6.1.4.1.33.100.2
136
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
136 total| Object Name |
|---|
irCharMibThis is the MRV LX Character MIB module. MODULE-IDENTITY .1.3.6.1.4.1.33.100.2 |
irCharNumberThe number of entries in irCharPortTable.ro Integer32 .1.3.6.1.4.1.33.100.2.1 |
irCharPortTableA list of character port entries. SEQUENCE OF IrCharPortEntry .1.3.6.1.4.1.33.100.2.2 |
irCharPortEntryA character port entry. IrCharPortEntry .1.3.6.1.4.1.33.100.2.2.1 |
irCharPortIndexAn index value that uniquely identifies a port.ro INTEGER .1.3.6.1.4.1.33.100.2.2.1.1 |
irCharPortAccessTypeThe access type value for the port.rw PortAccessType .1.3.6.1.4.1.33.100.2.2.1.2 |
irCharPortFlowControlThe flow control mechanism configured for the port.rw Enumeration .1.3.6.1.4.1.33.100.2.2.1.3 |
irCharPortStopBitsThe number of stop bits configured for the port.rw INTEGER .1.3.6.1.4.1.33.100.2.2.1.4 |
irCharPortParityThe parity configured for the port.rw Enumeration .1.3.6.1.4.1.33.100.2.2.1.5 |
irCharPortBitsPerCharThe number of bits per character.rw INTEGER .1.3.6.1.4.1.33.100.2.2.1.6 |
irCharPortAutoDialThe auto dial setting for the port. This object has been deprecated and will be removed in the next release.rodeprecated Enumeration .1.3.6.1.4.1.33.100.2.2.1.7 |
irCharPortAutoHangupThe auto hangup setting for the port.rw Enumeration .1.3.6.1.4.1.33.100.2.2.1.8 |
irCharPortAutobaudThe autobaud status for the port.rw Enumeration .1.3.6.1.4.1.33.100.2.2.1.9 |
irCharPortAutobaudRetryThe autobaud retry interval (in secods).rw INTEGER .1.3.6.1.4.1.33.100.2.2.1.10 |
irCharPortInSignalCtsThe current value of the input CTS signal.ro SignalStatus .1.3.6.1.4.1.33.100.2.2.1.11 |
irCharPortInSignalDsrThe current value of the input DSR signal.ro SignalStatus .1.3.6.1.4.1.33.100.2.2.1.12 |
irCharPortInSignalDcdThe current value of the input DCD signal.ro SignalStatus .1.3.6.1.4.1.33.100.2.2.1.13 |
irCharPortOutSignalRtsThe current value of the output RTS signal.rw SignalStatus .1.3.6.1.4.1.33.100.2.2.1.14 |
irCharPortOutSignalDtrThe current value of the output DTR signal.rw SignalStatus .1.3.6.1.4.1.33.100.2.2.1.15 |
irCharPortSpeedThe port speed in bits per second.rw PortSpeed .1.3.6.1.4.1.33.100.2.2.1.16 |
irCharPortPromptAn administratively assigned prompt for the port.rw DisplayString .1.3.6.1.4.1.33.100.2.2.1.17 |
irCharPortBreakThe break status for the port.rw Enumeration .1.3.6.1.4.1.33.100.2.2.1.18 |
irCharPortSpecialBreakStringAn administratively assigned special break string for the port.rw DisplayString .1.3.6.1.4.1.33.100.2.2.1.19 |
irCharPortSpecialBreakThe special break status for the port.rw Enumeration .1.3.6.1.4.1.33.100.2.2.1.20 |
irCharPortInboundAuthThe inbound authentication status for the port.rw PortAuthType .1.3.6.1.4.1.33.100.2.2.1.21 |
irCharPortOutboundAuthThe outbound authentication status for the port.rw PortAuthType .1.3.6.1.4.1.33.100.2.2.1.22 |
irCharPortAuthFallbackThe Authentication fallback attempts for the port.rw INTEGER .1.3.6.1.4.1.33.100.2.2.1.23 |
irCharPortRadiusAcctThe Radius accounting status for the port.rw Enumeration .1.3.6.1.4.1.33.100.2.2.1.24 |
irCharPortTacacsAcctThe Tacacs accounting status for the port.rw Enumeration .1.3.6.1.4.1.33.100.2.2.1.25 |
irCharPortTransparentThe transparent status for the port.rw Enumeration .1.3.6.1.4.1.33.100.2.2.1.26 |
irCharPortDataBufferSizeAn administratively assigned data buffer log sizerw INTEGER .1.3.6.1.4.1.33.100.2.2.1.27 |
irCharPortDataBufferSyslogThe data buffer syslog status for the port.rw Enumeration .1.3.6.1.4.1.33.100.2.2.1.28 |
irCharPortDataBufferDisplayThe data buffer display status for the port.rw Enumeration .1.3.6.1.4.1.33.100.2.2.1.29 |
irCharPortDataBufferTimeStampThe data buffer time stamp status for the port.rw Enumeration .1.3.6.1.4.1.33.100.2.2.1.30 |
irCharPortTelnetPortThe configured port used to telnet to the device attached to this port.ro INTEGER .1.3.6.1.4.1.33.100.2.2.1.31 |
irCharPortSshPortThe configured port used to SSH to the device attached to this port.ro INTEGER .1.3.6.1.4.1.33.100.2.2.1.32 |
irCharPortStatsTableA list of character port stats entries. SEQUENCE OF IrCharPortStatsEntry .1.3.6.1.4.1.33.100.2.3 |
irCharPortStatsEntryA character port stats entry. IrCharPortStatsEntry .1.3.6.1.4.1.33.100.2.3.1 |
irCharPortTransmitBytesThe number of bytes transmitted on the port.ro Counter32 .1.3.6.1.4.1.33.100.2.3.1.1 |
irCharPortReceiveBytesThe number of bytes received on the port.ro Counter32 .1.3.6.1.4.1.33.100.2.3.1.2 |
irCharPortFrameErrorsThe number of frame errors on the port.ro Counter32 .1.3.6.1.4.1.33.100.2.3.1.3 |
irCharPortOverrunErrorsThe number of overrun errors on the port.ro Counter32 .1.3.6.1.4.1.33.100.2.3.1.4 |
irCharPortParityErrorsThe number of parity errors on the port.ro Counter32 .1.3.6.1.4.1.33.100.2.3.1.5 |
irTempSensorTableList of temperature sensor entries. SEQUENCE OF IrTempSensorEntry .1.3.6.1.4.1.33.100.2.4 |
irTempSensorEntryA temp sensor entry. IrTempSensorEntry .1.3.6.1.4.1.33.100.2.4.1 |
irTempPortIndexThe port on which the temp sensor is configured.ro INTEGER .1.3.6.1.4.1.33.100.2.4.1.1 |
irTempSensorIndexA unique value that identifies a specific configured temp sensor.ro INTEGER .1.3.6.1.4.1.33.100.2.4.1.2 |
irTempValueThe current temperature value.ro INTEGER .1.3.6.1.4.1.33.100.2.4.1.3 |
irTempValueUnitsThis object indicates the units for the temperature value.rw Enumeration .1.3.6.1.4.1.33.100.2.4.1.4 |
irTempThresholdHighThe high temperature threhsold value.rw INTEGER .1.3.6.1.4.1.33.100.2.4.1.5 |
irTempThresholdLowThe low temperature threhsold value.rw INTEGER .1.3.6.1.4.1.33.100.2.4.1.6 |
irTempTrapSeverityThe severity value to be sent in the threshold trap.rw TrapSeverity .1.3.6.1.4.1.33.100.2.4.1.7 |
irTempHysteresisAfter crossing a threshold, the delta by which the caliberated value must drop within the normal range before the alarm condition is cleared (i.e. a cleared alarm is generated).rw INTEGER .1.3.6.1.4.1.33.100.2.4.1.8 |
irHumiditySensorTableA list of humidity sensor entries. SEQUENCE OF IrHumiditySensorEntry .1.3.6.1.4.1.33.100.2.5 |
irHumiditySensorEntryA humidity sensor entry. IrHumiditySensorEntry .1.3.6.1.4.1.33.100.2.5.1 |
irHumidityPortIndexThe port on which the humidity sensor is configured.ro INTEGER .1.3.6.1.4.1.33.100.2.5.1.1 |
irHumiditySensorIndexA unique value that identifies a specific configured humidity sensor.ro INTEGER .1.3.6.1.4.1.33.100.2.5.1.2 |
irHumidityValueThe current humidity value (as a percentage).ro INTEGER .1.3.6.1.4.1.33.100.2.5.1.3 |
irHumidityThresholdHighThe high humidity threhsold value.rw INTEGER .1.3.6.1.4.1.33.100.2.5.1.4 |
irHumidityThresholdLowThe low humidity threhsold value.rw INTEGER .1.3.6.1.4.1.33.100.2.5.1.5 |
irHumidityTrapSeverityThe severity value to be sent in the threshold trap.rw TrapSeverity .1.3.6.1.4.1.33.100.2.5.1.6 |
irHumidityHysteresisAfter crossing a threshold, the delta by which the caliberated value must drop within the normal range before the alarm condition is cleared (i.e. a cleared alarm is generated).rw INTEGER .1.3.6.1.4.1.33.100.2.5.1.7 |
irPowerTableA list of power port entries. SEQUENCE OF IrPowerEntry .1.3.6.1.4.1.33.100.2.6 |
irPowerEntryA power port config entry. IrPowerEntry .1.3.6.1.4.1.33.100.2.6.1 |
irPowerModuleTypeThe type of power module attached to the power port.ro Enumeration .1.3.6.1.4.1.33.100.2.6.1.1 |
irPowerCurrentLoadAn Ascii string indicating the total unit current load, in Amps.ro DisplayString .1.3.6.1.4.1.33.100.2.6.1.2 |
irPowerOutletCountThe number of power outlets on the module.ro INTEGER .1.3.6.1.4.1.33.100.2.6.1.4 |
irPowerCurrentLoadAAn Ascii string indicating the current load, in Amps, of input feed A. Note that this info is available only on certain models. A value of 'N/A' indicates that this information is not available.ro DisplayString .1.3.6.1.4.1.33.100.2.6.1.5 |
irPowerCurrentLoadBAn Ascii string indicating the current load, in Amps, of input feed B. Note that this info is available only on certain models. A value of 'N/A' indicates that this information is not available.ro DisplayString .1.3.6.1.4.1.33.100.2.6.1.6 |
irPowerCurrentLoadCAn Ascii string indicating the current load, in Amps, of input feed C. Note that this info is available only on certain models. A value of 'N/A' indicates that this information is not available.ro DisplayString .1.3.6.1.4.1.33.100.2.6.1.7 |
irPowerOutletTableA list of Power Outlet entries. SEQUENCE OF IrPowerOutletEntry .1.3.6.1.4.1.33.100.2.7 |
irPowerOutletEntryA power outlet entry. IrPowerOutletEntry .1.3.6.1.4.1.33.100.2.7.1 |
irPowerPortIndexAn index which uniquely identifies a physical power port.ro INTEGER .1.3.6.1.4.1.33.100.2.7.1.1 |
irPowerOutletIndexAn index which uniquely identifies an outlet on a power outlet port.ro INTEGER .1.3.6.1.4.1.33.100.2.7.1.2 |
irPowerOutletNameA name used to identify this power outlet.rw DisplayString .1.3.6.1.4.1.33.100.2.7.1.3 |
irPowerOutletStatusThe status of the power outlet.ro Enumeration .1.3.6.1.4.1.33.100.2.7.1.4 |
irPowerOutletActionA read of this object always returns the value other(1). Setting it to one of the other values causes the corresponding action to take place.rw Enumeration .1.3.6.1.4.1.33.100.2.7.1.5 |
irPowerOutletCurrentLoadAn Ascii string indicating the current load, in Amps, for this outlet. A value of 'N/A' indicates that this information is not available.ro DisplayString .1.3.6.1.4.1.33.100.2.7.1.6 |
irTcpPipeTableA list of TcpPipe port entries. SEQUENCE OF IrTcpPipeEntry .1.3.6.1.4.1.33.100.2.8 |
irTcpPipeEntryA TcpPipe port config entry. IrTcpPipeEntry .1.3.6.1.4.1.33.100.2.8.1 |
irTcpPipeRemoteIpAddressThe IP address of the remote end of the TCP connection.rw IpAddress .1.3.6.1.4.1.33.100.2.8.1.1 |
irTcpPipeRemoteTcpPortThe TCP port number for the remote end of the TCP connection.rw INTEGER .1.3.6.1.4.1.33.100.2.8.1.2 |
irTcpPipeWindowSizeThe TCP window size to use for the TCP connection.rw INTEGER .1.3.6.1.4.1.33.100.2.8.1.3 |
irTcpPipeConnRetryCountThe TCP connection retry count to use for the TCP connection.rw INTEGER .1.3.6.1.4.1.33.100.2.8.1.4 |
irTcpPipeConnStatusThe TCP connection status.ro Enumeration .1.3.6.1.4.1.33.100.2.8.1.5 |
irModem OBJECT IDENTIFIER .1.3.6.1.4.1.33.100.2.9 |
irModemCfgTableA list of modem config entries. SEQUENCE OF IrModemCfgEntry .1.3.6.1.4.1.33.100.2.9.1 |
irModemCfgEntryA modem config entry. IrModemCfgEntry .1.3.6.1.4.1.33.100.2.9.1.1 |
irModemIndexAn index value that uniquely identifies a modem.ro INTEGER .1.3.6.1.4.1.33.100.2.9.1.1.1 |
irModemTimeoutThe number of seconds to wait to detect remote end setting DSR signal high before giving up trying to establish a call.rw INTEGER .1.3.6.1.4.1.33.100.2.9.1.1.2 |
irModemRetryThe number of times to try establishing a call.rw INTEGER .1.3.6.1.4.1.33.100.2.9.1.1.3 |
irModemStateThis indicates whether the modem is enabled or disabled on a port.rw Enumeration .1.3.6.1.4.1.33.100.2.9.1.1.4 |
irModemPoolingThis indicates whether modem pooling is enabled or disabled.rw Enumeration .1.3.6.1.4.1.33.100.2.9.1.1.5 |
irModemDialNumberThe phone number to dial when setting up a call.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.33.100.2.9.1.1.6 |
irModemInitStringThe modem initialisation string.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.33.100.2.9.1.1.7 |
irInternalModemPortThe physical port to which an internal modem is attached. A value of 0 indicates there is no internal modem present.ro INTEGER .1.3.6.1.4.1.33.100.2.9.2 |
irInternalModemTypeThe type of modem module installed in the system.ro Enumeration .1.3.6.1.4.1.33.100.2.9.3 |
irLdAlarmConfigTableA list of ldam alarm port config entries. SEQUENCE OF IrLdAlarmConfigEntry .1.3.6.1.4.1.33.100.2.10 |
irLdAlarmConfigEntryAn ldam alarm port config entry. IrLdAlarmConfigEntry .1.3.6.1.4.1.33.100.2.10.1 |
irLdAlarmPortIndexThe alarm port index.ro INTEGER .1.3.6.1.4.1.33.100.2.10.1.1 |
irLdAlarmPointIndexAn integer which uniquely identifies an alarm point on this port.ro INTEGER .1.3.6.1.4.1.33.100.2.10.1.2 |
irLdAlarmNameThe name assigned to the alarm point.rw DisplayString .1.3.6.1.4.1.33.100.2.10.1.3 |
irLdAlarmDescriptionA user configurable alarm point description string.rw DisplayString .1.3.6.1.4.1.33.100.2.10.1.4 |
irLdAlarmContactStateThe current state of the alarm point contacts.ro IrContactState .1.3.6.1.4.1.33.100.2.10.1.5 |
irLdAlarmContactFaultStateThe contact state (open or closed) which indicates the fault condition. If the value of this object and irLdAlarmContactState is the same, then the alarm point has been triggered.rw IrContactState .1.3.6.1.4.1.33.100.2.10.1.6 |
irLdAlarmTrapStatusThis indicates whether an snmp trap will be generated when this alarm point is generated.rw Enumeration .1.3.6.1.4.1.33.100.2.10.1.7 |
irLdAlarmTrapSeverityThe trap severity assigned to this alarm point. This value will be sent when an alarm fires and an snmp trap is generated.rw TrapSeverity .1.3.6.1.4.1.33.100.2.10.1.8 |
irLdAlarmCountThe number of times the alarm point has been generated since the LX was started.ro Counter32 .1.3.6.1.4.1.33.100.2.10.1.9 |
irLdAlarmTimestampA timestamp string indicating the time the last alarm was generated. A null string indicates that the alarm point has not been triggered.ro DisplayString .1.3.6.1.4.1.33.100.2.10.1.10 |
irLdControlConfigTableA list of ldam control port config entries. SEQUENCE OF IrLdControlConfigEntry .1.3.6.1.4.1.33.100.2.11 |
irLdControlConfigEntryAn ldam control port config entry. IrLdControlConfigEntry .1.3.6.1.4.1.33.100.2.11.1 |
irLdControlPortIndexThe control port index.ro INTEGER .1.3.6.1.4.1.33.100.2.11.1.1 |
irLdControlPointIndexAn integer which uniquely identifies a control point on this port.ro INTEGER (1) .1.3.6.1.4.1.33.100.2.11.1.2 |
irLdControlNameThe name assigned to the control point.rw DisplayString .1.3.6.1.4.1.33.100.2.11.1.3 |
irLdControlDescriptionA user configurable control point description string.rw DisplayString .1.3.6.1.4.1.33.100.2.11.1.4 |
irLdControlStateThe configured control state (deassert or assert).rw IrControlState .1.3.6.1.4.1.33.100.2.11.1.5 |
irLdControlEnergizedStateThe configured energized state (deassert or assert). If the value of this object and irLdControlState is the same, then the operational state will be on.rw IrControlState .1.3.6.1.4.1.33.100.2.11.1.6 |
irRs485PortTableA list of RS485 character port entries. SEQUENCE OF IrRs485PortEntry .1.3.6.1.4.1.33.100.2.12 |
irRs485PortEntryAn RS485 character port entry. IrRs485PortEntry .1.3.6.1.4.1.33.100.2.12.1 |
irRs485PortIndexAn index value that uniquely identifies an RS485 port. This value maps to the same index in the irCharPortTable.ro INTEGER .1.3.6.1.4.1.33.100.2.12.1.1 |
irRs485PortDuplexModeThe duplex mode for this RS485 port.rw Enumeration .1.3.6.1.4.1.33.100.2.12.1.2 |
irRs485PortEchoModeThe echo mode for this RS4585 port. This is used when irRs485PortDuplexMode object is set to half(2).rw Enumeration .1.3.6.1.4.1.33.100.2.12.1.3 |
irRs485PortTransmitterThe transmitter setting for this RS4585 port. This is used when irRs485PortDuplexMode object is set to full(1).rw Enumeration .1.3.6.1.4.1.33.100.2.12.1.4 |
irGsmPortTableA list of GSM/GPRS port entries. SEQUENCE OF IrGsmPortEntry .1.3.6.1.4.1.33.100.2.13 |
irGsmPortEntryAn GSM/GPRS port entry. IrGsmPortEntry .1.3.6.1.4.1.33.100.2.13.1 |
irGsmPortIndexAn index value that uniquely identifies an GSM/GPRS port. This value maps to the same index in the irCharPortTable.ro INTEGER .1.3.6.1.4.1.33.100.2.13.1.1 |
irGsmPortRcvSigStrengthThe received signal strenth.ro INTEGER .1.3.6.1.4.1.33.100.2.13.1.2 |
irGsmPortBitErrorRateThe port bit error rate.ro INTEGER .1.3.6.1.4.1.33.100.2.13.1.3 |
irUpsTableA list of ups entries. SEQUENCE OF IrUpsEntry .1.3.6.1.4.1.33.100.2.14 |
irUpsEntryA ups entry. IrUpsEntry .1.3.6.1.4.1.33.100.2.14.1 |
irUpsTypeThe ups type. It indicates the protocol used to communicate with the ups. A value of smart(1) means use Ascii based commands. A value of simple(2) means use RS232 signals (DTR, CTS). Note that, when irUpsType is simple, only irUpsStatus info is available.rw Enumeration .1.3.6.1.4.1.33.100.2.14.1.1 |
irUpsStatusThe ups status. A value of offline(1) indicates the ups is not providing power to the attached devices. A value of online(2) indicates the ups is providing power to the attached devices.ro Enumeration .1.3.6.1.4.1.33.100.2.14.1.2 |
irUpsModelThe ups model.ro DisplayString .1.3.6.1.4.1.33.100.2.14.1.3 |
irUpsChargeThe ups charge, as a percentage.ro DisplayString .1.3.6.1.4.1.33.100.2.14.1.4 |
irUpsLoadThe current load, as a percentage.ro DisplayString .1.3.6.1.4.1.33.100.2.14.1.5 |
irUpsLifeThe ups life (time remaining), in minutes.ro DisplayString .1.3.6.1.4.1.33.100.2.14.1.6 |