MRV-IN-REACH-DECNET-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for MRV-IN-REACH-DECNET-MIB.
72
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
72 total| Object Name |
|---|
xDecnet OBJECT IDENTIFIER .1.3.6.1.4.1.33.14 |
MRV-IN-REACH-PRODUCT-DIVISION-MIB Unknown .1.3.6.1.4.1.33.14 |
xRcp OBJECT IDENTIFIER .1.3.6.1.4.1.33.14.1 |
rcpRemoteAddressIf a remote console session exists, the Ethernet
address of the remote partner, otherwise zero
length.ro OCTET STRING .1.3.6.1.4.1.33.14.1.1 |
xPhiv OBJECT IDENTIFIER .1.3.6.1.4.1.33.14.2 |
xPhivRoute OBJECT IDENTIFIER .1.3.6.1.4.1.33.14.2.1 |
phivPathSelectionThe algorithm used to balance traffic between equal
next hop paths. 'roundRobin' selects the next hop
using a round robin algorithm for each hop.
'samePath' selects the next hop guaranteeing that
all packets with the same source/destination pair
will always use the same next hop.rw Enumeration .1.3.6.1.4.1.33.14.2.1.1 |
phivMaxPathsThe maximum number of equal cost next hops that the
router can remember and successfully load balance
between.rw INTEGER .1.3.6.1.4.1.33.14.2.1.2 |
phivStatusThe status of the DECnet routing software.ro Enumeration .1.3.6.1.4.1.33.14.2.1.3 |
xPhivCircuit OBJECT IDENTIFIER .1.3.6.1.4.1.33.14.2.2 |
phivCircuitTableA list of DECnet circuit entries. SEQUENCE OF PhivCircuitEntry .1.3.6.1.4.1.33.14.2.2.1 |
phivCircuitEntryParameter values for a DECnet circuit. PhivCircuitEntry .1.3.6.1.4.1.33.14.2.2.1.1 |
xPhivCircuitIndexIdentification of a circuit entry. Same as an
interface index (ifIndex).ro INTEGER .1.3.6.1.4.1.33.14.2.2.1.1.1 |
phivCircuitRoutingTimerThe maximum time in seconds allowed between Routing
updates on the circuit. Different values for LANs
vs. WANs.rw INTEGER .1.3.6.1.4.1.33.14.2.2.1.1.2 |
phivCircuitOperCostThe actual cost associated with the circuit.ro INTEGER .1.3.6.1.4.1.33.14.2.2.1.1.3 |
phivCircuitErrorsThe number of routed DECnet packets received in
error on this circuit.ro Counter .1.3.6.1.4.1.33.14.2.2.1.1.4 |
phivCircuitLastErrorThe error of the last routed DECnet packet received
in error on this circuit.ro Enumeration .1.3.6.1.4.1.33.14.2.2.1.1.5 |
phivCircuitLastErrorTimeThe date and time that the last routed DECnet
packet was received in error on this circuit.ro DateTime .1.3.6.1.4.1.33.14.2.2.1.1.6 |
phivCircuitLastErrorDataThe first 22 bytes of the last routed DECnet packet
received in error on this circuit.ro OCTET STRING .1.3.6.1.4.1.33.14.2.2.1.1.7 |
phivCircuitProtocolPriorityThe priority at which all DECnet routed packets
will be placed on the WAN output queue.rw Enumeration .1.3.6.1.4.1.33.14.2.2.1.1.8 |
phivCircuitRoutingPriorityRouter's priority to be designated router on this
circuit.rw INTEGER .1.3.6.1.4.1.33.14.2.2.1.1.9 |
xPhivImport OBJECT IDENTIFIER .1.3.6.1.4.1.33.14.2.3 |
phivCircuitImportTableA list of circuit import filter entries. SEQUENCE OF PhivCircuitImportEntry .1.3.6.1.4.1.33.14.2.3.1 |
phivCircuitImportEntryParameter values for an import filter. PhivCircuitImportEntry .1.3.6.1.4.1.33.14.2.3.1.1 |
phivCircuitImportIfThe interface associated with the import routing
filter.ro INTEGER .1.3.6.1.4.1.33.14.2.3.1.1.1 |
phivCircuitImportAddrThe address (node or area) to match against learned
route entries to decide whether to import the entry
to the routing database.ro PhivAddr .1.3.6.1.4.1.33.14.2.3.1.1.2 |
phivCircuitImportMaskThe mask which is ANDed with the address field as
well as the route entries address to determine
whether the address matches the route entry.ro PhivAddr .1.3.6.1.4.1.33.14.2.3.1.1.3 |
phivCircuitImportActionThe action to take if the address field along with
the mask field matches the route entry.rw Enumeration .1.3.6.1.4.1.33.14.2.3.1.1.4 |
phivCircuitImportStatusSetting to 'invalid' removes this import filter
from the table. Setting to 'valid' has no effect.rw Enumeration .1.3.6.1.4.1.33.14.2.3.1.1.5 |
xPhivImportArea OBJECT IDENTIFIER .1.3.6.1.4.1.33.14.2.4 |
phivCircuitImportAreaTableA list of circuit import area filter entries. SEQUENCE OF PhivCircuitImportAreaEntry .1.3.6.1.4.1.33.14.2.4.1 |
phivCircuitImportAreaEntryParameter values for an import area filter. PhivCircuitImportAreaEntry .1.3.6.1.4.1.33.14.2.4.1.1 |
phivCircuitImportAreaIfThe interface associated with the import area
routing filter.ro INTEGER .1.3.6.1.4.1.33.14.2.4.1.1.1 |
phivCircuitImportAreaAddrThe address (node or area) to match against learned
route entries to decide whether to import the entry
to the routing database.ro PhivAddr .1.3.6.1.4.1.33.14.2.4.1.1.2 |
phivCircuitImportAreaMaskThe mask which is ANDed with the address field as
well as the route entries address to determine
whether the address matches the route entry.ro PhivAddr .1.3.6.1.4.1.33.14.2.4.1.1.3 |
phivCircuitImportAreaActionThe action to take if the address field along with
the mask field matches the route entry.rw Enumeration .1.3.6.1.4.1.33.14.2.4.1.1.4 |
phivCircuitImportAreaStatusSetting to 'invalid' removes this import area
filter from the table. Setting to 'valid' has no
effect.rw Enumeration .1.3.6.1.4.1.33.14.2.4.1.1.5 |
xPhivExport OBJECT IDENTIFIER .1.3.6.1.4.1.33.14.2.5 |
phivCircuitExportTableA list of circuit export filter entries. SEQUENCE OF PhivCircuitExportEntry .1.3.6.1.4.1.33.14.2.5.1 |
phivCircuitExportEntryParameter values for an export filter. PhivCircuitExportEntry .1.3.6.1.4.1.33.14.2.5.1.1 |
phivCircuitExportIfThe interface associated with the export routing
filter.ro INTEGER .1.3.6.1.4.1.33.14.2.5.1.1.1 |
phivCircuitExportAddrThe address (node or area) to match against learned
route entries to decide whether to export the entry
to the routing database.ro PhivAddr .1.3.6.1.4.1.33.14.2.5.1.1.2 |
phivCircuitExportMaskThe mask which is ANDed with the address field as
well as the route entries address to determine
whether the address matches the route entry.ro PhivAddr .1.3.6.1.4.1.33.14.2.5.1.1.3 |
phivCircuitExportActionThe action to take if the address field along with
the mask field matches the route entry.rw Enumeration .1.3.6.1.4.1.33.14.2.5.1.1.4 |
phivCircuitExportStatusSetting to 'invalid' removes this export filter
from the table. Setting to 'valid' has no effect.rw Enumeration .1.3.6.1.4.1.33.14.2.5.1.1.5 |
xPhivExportArea OBJECT IDENTIFIER .1.3.6.1.4.1.33.14.2.6 |
phivCircuitExportAreaTableA list of circuit export area filter entries. SEQUENCE OF PhivCircuitExportAreaEntry .1.3.6.1.4.1.33.14.2.6.1 |
phivCircuitExportAreaEntryParameter values for an export area filter. PhivCircuitExportAreaEntry .1.3.6.1.4.1.33.14.2.6.1.1 |
phivCircuitExportAreaIfThe interface associated with the export area
routing filter.ro INTEGER .1.3.6.1.4.1.33.14.2.6.1.1.1 |
phivCircuitExportAreaAddrThe address (node or area) to match against learned
route entries to decide whether to export the entry
to the routing database.ro PhivAddr .1.3.6.1.4.1.33.14.2.6.1.1.2 |
phivCircuitExportAreaMaskThe mask which is ANDed with the address field as
well as the route entries address to determine
whether the address matches the route entry.ro PhivAddr .1.3.6.1.4.1.33.14.2.6.1.1.3 |
phivCircuitExportAreaActionThe action to take if the address field along with
the mask field matches the route entry.rw Enumeration .1.3.6.1.4.1.33.14.2.6.1.1.4 |
phivCircuitExportAreaStatusSetting to 'invalid' removes this export area
filter from the table. Setting to 'valid' has no
effect.rw Enumeration .1.3.6.1.4.1.33.14.2.6.1.1.5 |
xPhivFilter OBJECT IDENTIFIER .1.3.6.1.4.1.33.14.2.7 |
phivCircuitFilterTableA list of circuit filter entries. SEQUENCE OF PhivCircuitFilterEntry .1.3.6.1.4.1.33.14.2.7.1 |
phivCircuitFilterEntryParameter values for a filter. PhivCircuitFilterEntry .1.3.6.1.4.1.33.14.2.7.1.1 |
phivCircuitFilterIfThe interface associated with the filter entry.ro INTEGER .1.3.6.1.4.1.33.14.2.7.1.1.1 |
phivCircuitFilterDstAddrThe address (node or area) to match against the
destination address of the packet to decide whether
to forward the packet.ro PhivAddr .1.3.6.1.4.1.33.14.2.7.1.1.2 |
phivCircuitFilterDstMaskThe mask which is ANDed with the destination
address field and the packet's destination address
to determine whether the address matches the
packet's address.ro PhivAddr .1.3.6.1.4.1.33.14.2.7.1.1.3 |
phivCircuitFilterSrcAddrThe address (node or area) to match against the
source address of the packet to decide whether to
forward the packet.ro PhivAddr .1.3.6.1.4.1.33.14.2.7.1.1.4 |
phivCircuitFilterSrcMaskThe mask which is ANDed with the source address
field and the packet's source address to determine
whether the address matches the packet's address.ro PhivAddr .1.3.6.1.4.1.33.14.2.7.1.1.5 |
phivCircuitFilterActionThe action to take if the address fields along with
the mask fields match the packet.rw Enumeration .1.3.6.1.4.1.33.14.2.7.1.1.6 |
phivCircuitFilterStatusSetting to 'invalid' removes this Filter filter
from the table. Setting to 'valid' has no effect.rw Enumeration .1.3.6.1.4.1.33.14.2.7.1.1.7 |
xPhivTraffic OBJECT IDENTIFIER .1.3.6.1.4.1.33.14.2.8 |
phivTrafficSortSetting to 'execute' causes the most recent traffic
information to be sorted into the phivTrafficTable.
The sorting precedence is: decreasing percentage,
increasing destination address, increasing source
address, and increasing interface number. Setting
to 'ready' has no effect.rw Enumeration .1.3.6.1.4.1.33.14.2.8.1 |
phivTrafficTableA list of traffic entries, sorted in the order
specified by phivTrafficSort. SEQUENCE OF PhivTrafficEntry .1.3.6.1.4.1.33.14.2.8.2 |
phivTrafficEntryA traffic entry. PhivTrafficEntry .1.3.6.1.4.1.33.14.2.8.2.1 |
phivTrafficIndexIdentification of this traffic entry.ro INTEGER .1.3.6.1.4.1.33.14.2.8.2.1.1 |
phivTrafficPercentThe percentage of total traffic that this traffic
entry represents, in tenths of a percent.ro INTEGER .1.3.6.1.4.1.33.14.2.8.2.1.2 |
phivTrafficDstThe destination to which the traffic entry
applies.ro PhivAddr .1.3.6.1.4.1.33.14.2.8.2.1.3 |
phivTrafficSrcThe source to which the traffic entry applies.ro PhivAddr .1.3.6.1.4.1.33.14.2.8.2.1.4 |
phivTrafficIfThe inbound interface to which the traffic entry
applies. This value is the same as IfIndex.ro INTEGER .1.3.6.1.4.1.33.14.2.8.2.1.5 |