MRV-IN-REACH-BOOT-SERVER-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for MRV-IN-REACH-BOOT-SERVER-MIB.
108
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
108 total| Object Name |
|---|
xBootServer OBJECT IDENTIFIER .1.3.6.1.4.1.33.6 |
RFC1213-MIB Unknown .1.3.6.1.4.1.33.6 |
xBsBasic OBJECT IDENTIFIER .1.3.6.1.4.1.33.6.1 |
basicLogLimitMaximum allowed number of kilobytes for recording
events. Corresponds directly to MANAGER LOG FILE
SIZE and the value labeled 'Log File Size:' in the
MANAGER CHARACTERISTICS display.rw INTEGER .1.3.6.1.4.1.33.6.1.1 |
basicActiveLimitMaximum allowed number of simultaneous service
dialogs. Corresponds directly to MANAGER
SIMULTANEOUS and the value labeled 'Maximum
simultaneous requests:' in the MANAGER
CHARACTERISTICS display.rw INTEGER .1.3.6.1.4.1.33.6.1.2 |
basicActiveNumberNumber of active service dialogs. Corresponds
indirectly to the list of active clients in the
MANAGER STATUS display.ro Gauge .1.3.6.1.4.1.33.6.1.3 |
basicClientNumberNumber of defined clients. Corresponds indirectly
to the list of defined clients in the MANAGER LOCAL,
MANAGER GLOBAL, and MANAGER NODE displays.ro Gauge .1.3.6.1.4.1.33.6.1.4 |
basicOffersSentTotal number of service offers sent in response to
client requests. Corresponds directly to the value
labeled 'Total service offers sent:' in the MANAGER
STATUS display.ro Counter .1.3.6.1.4.1.33.6.1.5 |
basicEventTotalTotal number of events that have been written to
the event log since it was last purged. This may be
less than the number currently in the log.
Corresponds directly to the value labeled 'Total
Messages Logged:' in the MANAGER EVENTS display.ro Gauge .1.3.6.1.4.1.33.6.1.6 |
basicEventPurgeControl to cause emptying the event log. In
response to a get-request or get-next-request, the
agent always returns 'ready' for this value.
Setting the value to 'ready' has no effect. Setting
it to 'execute' causes the event log to immediately
become empty. Corresponds directly to the PURGE
MANAGER LOG FILE command.rw Enumeration .1.3.6.1.4.1.33.6.1.7 |
activeTableA list of active client dialog entries. The number
of entries is given by basicActiveNumber. SEQUENCE OF ActiveEntry .1.3.6.1.4.1.33.6.1.8 |
activeEntryParameter values for an active client dialog
entry. ActiveEntry .1.3.6.1.4.1.33.6.1.8.1 |
activeIdentificationTypeThe type of identification value in
activeIdentification. Corresponds indirectly to the
value labeled 'EthernetAddress' in the MANAGER
STATUS display.ro AddressType .1.3.6.1.4.1.33.6.1.8.1.1 |
activeIdentificationIdentification of the active partner. Corresponds
directly to the value labeled 'EthernetAddress' in
the MANAGER STATUS display.ro OCTET STRING .1.3.6.1.4.1.33.6.1.8.1.2 |
activeFunctionThe function the server is performing with the
partner. Corresponds directly to the value labeled
'Function' in the MANAGER STATUS display.ro Enumeration .1.3.6.1.4.1.33.6.1.8.1.3 |
activeSoftwareVersionTypeIf activeFunction is 'load', the software version
being sent to the client, otherwise 'notApplicable'.
Corresponds to the letter in the software version
labeled 'Version' in the MANAGER STATUS display.
alpha 'A': alpha test
beta 'B': beta test
production null: normal, production software
special 'S': special, custom software
diagnostic 'D': diagnostic, debug softwarero Enumeration .1.3.6.1.4.1.33.6.1.8.1.4 |
activeSoftwareVersionIf activeFunction is 'load', the 4-byte software
version being sent to the client, otherwise zero
length. In order, the octets contain major version,
minor version, ECO, and pre-release number.
Corresponds to the numbers in the software version
labeled 'Version' in the MANAGER STATUS display.
For example, the version display for
activeSoftwareVersionType 'production' and
activeSoftwareVersion '2.2.0.0' is 'V2.2'.
The version display for activeSoftwareVersionType
'beta' and activeSoftwareVersion '3.1.0.4' is
'V3.1B4'.ro OCTET STRING .1.3.6.1.4.1.33.6.1.8.1.5 |
activeParameterVersionIf activeFunction is 'parameterStore', the
parameter version being stored by the client,
otherwise zero. Corresponds directly to the value
labeled 'Version' in the MANAGER STATUS display.ro INTEGER .1.3.6.1.4.1.33.6.1.8.1.6 |
activeCurrentSequenceThe current dialog sequence number. Corresponds
directly to the value labeled 'Seq' in the MANAGER
STATUS display.ro INTEGER .1.3.6.1.4.1.33.6.1.8.1.7 |
activeBytesRemainingThe number of bytes remaining to be transferred in
the dialog. Corresponds directly to the value
labeled 'Left' in the MANAGER STATUS display.ro INTEGER .1.3.6.1.4.1.33.6.1.8.1.8 |
activeFileThe name of the file being used in the dialog.
Corresponds directly to the value labeled 'File' in
the MANAGER STATUS display.ro DisplayString .1.3.6.1.4.1.33.6.1.8.1.9 |
activeStatusThe final status of the most recent attempt to get
an image. Corresponds directly to the value labeled
'Get Status:' in the DEVICE STATUS display.ro DialogStatus .1.3.6.1.4.1.33.6.1.8.1.10 |
activeStateThe dynamic state of an active attempt to get an
image. Corresponds directly to the value labeled
'Get State:' in the DEVICE STATUS display.ro Enumeration .1.3.6.1.4.1.33.6.1.8.1.11 |
clientTableA list of client data base entries. The number of
entries is given by basicClientNumber. SEQUENCE OF ClientEntry .1.3.6.1.4.1.33.6.1.9 |
clientEntryParameter values for a client data base entry. ClientEntry .1.3.6.1.4.1.33.6.1.9.1 |
clientIdentificationTypeThe type of identification value in
clientIdentification. Corresponds directly to
MANAGER NODE, MANAGER GLOBAL, and MANAGER LOCAL, and
the value labeled 'Ethernet Address' in the MANAGER
NODE display or 'Ethernet Address', 'Device', and
'Global Devices' or 'Local Devices' in the MANAGER
GLOBAL and LOCAL displays.ro AddressType .1.3.6.1.4.1.33.6.1.9.1.1 |
clientIdentificationIdentification of the client, either a hardware
type or an Ethernet address, depending on
clientIdentificationType. Corresponds directly to
MANAGER NODE, MANAGER GLOBAL, and MANAGER LOCAL, and
the value labeled 'Ethernet Address' in the MANAGER
NODE display or 'Ethernet Address', 'Device', and
'Global Devices' or 'Local Devices' in the MANAGER
GLOBAL and LOCAL displays.ro OCTET STRING .1.3.6.1.4.1.33.6.1.9.1.2 |
clientEntryStatusThe status of the entry. Set to 'invalid' to
remove the entry, which corresponds directly to the
PURGE LOCAL, PURGE GLOBAL, and PURGE NODE commands.
Actual removal of the entry is implementation
specific.rw Enumeration .1.3.6.1.4.1.33.6.1.9.1.3 |
clientNameA name that may be used to identify the client.
Corresponds directly to the value labeled 'Name' in
the MANAGER NODE display.rw DisplayString .1.3.6.1.4.1.33.6.1.9.1.4 |
clientLoadFileThe file with the client's load image. Corresponds
directly to the value labeled 'Load File' in the
MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE
displays.rw DisplayString .1.3.6.1.4.1.33.6.1.9.1.5 |
clientDiagnosticFileThe file with the client's diagnostic test image.
Corresponds directly to the value labeled 'Diag
File' in the MANAGER LOCAL, MANAGER GLOBAL, and
MANAGER NODE displays.rw DisplayString .1.3.6.1.4.1.33.6.1.9.1.6 |
clientLoadServiceControl for allowing load service for the client.
Corresponds directly to the value labeled 'Load' in
the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE
displays.rw Enumeration .1.3.6.1.4.1.33.6.1.9.1.7 |
clientDumpServiceControl for allowing dump service for the client.
Corresponds directly to the value labeled 'Dump' in
the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE
displays.rw Enumeration .1.3.6.1.4.1.33.6.1.9.1.8 |
namedTableA list of named client data base entries. The
number of entries is given by basicClientNumber. SEQUENCE OF NamedEntry .1.3.6.1.4.1.33.6.1.10 |
namedEntryParameter values for a named client data base
entry. NamedEntry .1.3.6.1.4.1.33.6.1.10.1 |
namedIdentificationTypeThe type of identification value in
namedIdentification. Corresponds directly to
MANAGER NODE, MANAGER GLOBAL, and MANAGER LOCAL, and
the value labeled 'Ethernet Address' in the MANAGER
NODE display or 'Ethernet Address', 'Device', and
'Global Devices' or 'Local Devices' in the MANAGER
GLOBAL and LOCAL displays.ro AddressType .1.3.6.1.4.1.33.6.1.10.1.1 |
namedIdentificationIdentification of the client, either a hardware
type or an Ethernet address, depending on
namedIdentificationType. Corresponds directly to
MANAGER NODE, MANAGER GLOBAL, and MANAGER LOCAL, and
the value labeled 'Ethernet Address' in the MANAGER
NODE display or 'Ethernet Address', 'Device', and
'Global Devices' or 'Local Devices' in the MANAGER
GLOBAL and LOCAL displays.ro OCTET STRING .1.3.6.1.4.1.33.6.1.10.1.2 |
namedEntryStatusThe status of the entry. Set to 'invalid' to
remove the entry, which corresponds directly to the
PURGE LOCAL, PURGE GLOBAL, and PURGE NODE commands.
Actual removal of the entry is implementation
specific.ro Enumeration .1.3.6.1.4.1.33.6.1.10.1.3 |
namedNameA name that may be used to identify the client.
Corresponds directly to the value labeled 'Name' in
the MANAGER NODE display.ro DisplayString .1.3.6.1.4.1.33.6.1.10.1.4 |
namedLoadFileThe file with the client's load image. Corresponds
directly to the value labeled 'Load File' in the
MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE
displays.ro DisplayString .1.3.6.1.4.1.33.6.1.10.1.5 |
namedDiagnosticFileThe file with the client's diagnostic test image.
Corresponds directly to the value labeled 'Diag
File' in the MANAGER LOCAL, MANAGER GLOBAL, and
MANAGER NODE displays.ro DisplayString .1.3.6.1.4.1.33.6.1.10.1.6 |
namedLoadServiceControl for allowing load service for the client.
Corresponds directly to the value labeled 'Load' in
the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE
displays.ro Enumeration .1.3.6.1.4.1.33.6.1.10.1.7 |
namedDumpServiceControl for allowing dump service for the client.
Corresponds directly to the value labeled 'Dump' in
the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE
displays.ro Enumeration .1.3.6.1.4.1.33.6.1.10.1.8 |
xEventTableA list of event entries. The number of entries is
given by basicEventNumber. SEQUENCE OF XEventEntry .1.3.6.1.4.1.33.6.1.11 |
xEventEntryParameter values for a event entry. XEventEntry .1.3.6.1.4.1.33.6.1.11.1 |
xEventIndexIn identification number for an event. The value 1
indicates the oldest event in the file, with
subsequent numbers indicating sequential events.
The event text for a given number may change as a
circular event log wraps over its beginning.
Corresponds directly to the relative position of an
event in the MANAGER EVENTS display.ro INTEGER .1.3.6.1.4.1.33.6.1.11.1.1 |
xEventTextThe text of the event, including date, time and
other information. Corresponds directly to the
individual event text in the MANAGER EVENTS
display.ro DisplayString .1.3.6.1.4.1.33.6.1.11.1.2 |
basicDeviceNumberThe system's number of mass-storage devices.ro INTEGER .1.3.6.1.4.1.33.6.1.12 |
deviceTableA list of device entries. The number of entries is
given by basicDeviceNumber. SEQUENCE OF DeviceEntry .1.3.6.1.4.1.33.6.1.13 |
deviceEntryParameter values for a device entry. DeviceEntry .1.3.6.1.4.1.33.6.1.13.1 |
deviceIndexIn identification number for a device, in the range
1 to basicDeviceNumberro INTEGER .1.3.6.1.4.1.33.6.1.13.1.1 |
deviceNameA name by which the device is known in other
displays, such as 'C1' or 'D2'.ro DisplayString .1.3.6.1.4.1.33.6.1.13.1.2 |
deviceDescrDetails of the device type, including, for example,
size, manufacturer, Flash versus RAM, and such.
Corresponds directly to the value labeled 'Device
Type: in the MANAGER DEVICE STATUS display.ro DisplayString .1.3.6.1.4.1.33.6.1.13.1.3 |
deviceOperationCurrent operational state of the device.
Corresponds directly the value labeled 'Device
Operation:' in the MANAGER DEVICE STATUS display.ro Enumeration .1.3.6.1.4.1.33.6.1.13.1.4 |
deviceFormatFormatting status of the device. Corresponds
directly the presence of one of the value labels
under the label 'Device Status:' in the MANAGER
DEVICE STATUS display.ro Enumeration .1.3.6.1.4.1.33.6.1.13.1.5 |
deviceProtectionWrite-protect status of the device. Corresponds
directly the presence of one of the value labels
under the label 'Device Status:' in the MANAGER
DEVICE STATUS display.ro Enumeration .1.3.6.1.4.1.33.6.1.13.1.6 |
deviceFormatMediumControl to cause formatting of the medium in the
device. In response to a get-request or
get-next-request, the agent always returns 'ready'
for this value. Setting the value to 'ready' has no
effect. Setting it to 'execute' causes the device
to be formatted. Corresponds directly to the FORMAT
DEVICE command.rw Enumeration .1.3.6.1.4.1.33.6.1.13.1.7 |
deviceGetFileControl to cause getting a file to the device from
a remote host system. In response to a get-request
or get-next-request, the agent always returns
'ready' for this value. Setting the value to
'ready' has no effect. Setting it to 'execute'
causes the get to be attempted. Corresponds
directly to the GET DEVICE command.
When set to 'execute', the objects
deviceGetFileHostIdentificationType,
deviceGetFileHostIdentification,
deviceGetFileName and deviceGetFileArea
must be somewhere in the same set
request message.rw Enumeration .1.3.6.1.4.1.33.6.1.13.1.8 |
deviceGetFileHostIdentificationTypeThe type of identification value in
deviceIdentification. Corresponds indirectly to
ADDRESS in the GET DEVICE command.
This object may not be set outside the context of
setting deviceGetFile to 'execute'. In response to
a get-request or get-next-request, the value of this
object is 'undefined'.rw AddressType .1.3.6.1.4.1.33.6.1.13.1.9 |
deviceGetFileHostIdentificationIdentification of the host to get the file from,
with type depending on deviceIdentificationType.
Corresponds directly to ADDRESS in the GET DEVICE
command.
This object may not be set outside the context of
setting deviceGetFile to 'execute'. In response to
a get-request or get-next-request, the value of this
object is zero length.rw OCTET STRING .1.3.6.1.4.1.33.6.1.13.1.10 |
deviceGetFileNameThe name of the file to get. Corresponds directly
to LOAD FILE in the GET DEVICE command.
This object may not be set outside the context of
setting deviceGetFile to 'execute'. In response to
a get-request or get-next-request, the value of this
object is zero length.rw DisplayString .1.3.6.1.4.1.33.6.1.13.1.11 |
deviceGetFileAreaThe area number in which to put the file.
Corresponds directly to AREA in the GET DEVICE
command. If it is not relevant to the particular
device, it is ignored.
This object may not be set outside the context of
setting deviceGetFile to 'execute'. In response to
a get-request or get-next-request, the value of this
object is zero.rw INTEGER .1.3.6.1.4.1.33.6.1.13.1.12 |
deviceFormatOptionFormatting option to apply. Corresponds directly
to the OPTION in the FORMAT DEVICE command.
This object may not be set outside the context of
setting deviceFormatMedium to 'execute'. In
response to a get-request or get-next-request, the
value of this object is zero.rw INTEGER .1.3.6.1.4.1.33.6.1.13.1.13 |
deviceFormatRedundantParamsControl for creating redundant parameter storage
areas when formatting. Corresponds directly to
NONREDUNDANT in the FORMAT DEVICE command.
This object may not be set outside the context of
setting deviceFormatMedium to 'execute'. In
response to a get-request or get-next-request, the
value of this object is zero.rw Enumeration .1.3.6.1.4.1.33.6.1.13.1.14 |
devicePreviousStatusResult of the immediately previous concluded boot
dialog. Corresponds directly to the value labeled
'Get File Previous Status:' in the SHOW CARD STATUS
display.ro DialogStatus .1.3.6.1.4.1.33.6.1.13.1.15 |
xDump OBJECT IDENTIFIER .1.3.6.1.4.1.33.6.2 |
dumpServiceControl for allowing dump service for any client.
Corresponds directly to DUMP and the value labeled
'Dump:' in the MANAGER CHARACTERISTICS display.rw Enumeration .1.3.6.1.4.1.33.6.2.1 |
dumpDriveIdentification number of the disk drive where dumps
are stored. Corresponds directly to DUMP DRIVE and
the value labeled 'Dump Drive:' in the MANAGER
CHARACTERISTICS display.rw INTEGER .1.3.6.1.4.1.33.6.2.2 |
dumpMeritRelative preference for this dump server over
others. Corresponds directly to DUMP MERIT and the
value labeled 'Dump Merit:' in the MANAGER
CHARACTERISTICS display.rw INTEGER .1.3.6.1.4.1.33.6.2.3 |
dumpSizeType of dump file to keep. Corresponds directly to
DUMP SIZE and the value labeled 'Dump Size:' in the
MANAGER CHARACTERISTICS display.rw Enumeration .1.3.6.1.4.1.33.6.2.4 |
dumpCompletedThe number of dumps completed since system
initialization. Corresponds directly to the value
labeled 'Dump Operations Completed:' in the MANAGER
STATUS display.ro Counter .1.3.6.1.4.1.33.6.2.5 |
dumpActiveThe number of dumps in progress. Corresponds
directly to the value labeled 'Currently Dumping:'
in the MANAGER STATUS display.ro Gauge .1.3.6.1.4.1.33.6.2.6 |
dumpFileNumberThe number of dump files currently stored.
Corresponds directly to the value labeled 'Network
dump files' and 'files' in the MANAGER FILES
display.ro Gauge .1.3.6.1.4.1.33.6.2.7 |
dumpFileTableA list of dump file entries. The number of entries
is given by dumpFileNumber. SEQUENCE OF DumpFileEntry .1.3.6.1.4.1.33.6.2.8 |
dumpFileEntryParameter values for a dump file entry. DumpFileEntry .1.3.6.1.4.1.33.6.2.8.1 |
dumpFileIdentificationTypeThe type of identification value in
dumpFileIdentification. Corresponds indirectly to a
file name part in the section labeled 'Network dump
files' in the MANAGER FILES display.ro AddressType .1.3.6.1.4.1.33.6.2.8.1.1 |
dumpFileIdentificationIdentification of the dump file, an Ethernet
address, as indicated by dumpFileIdentificationType.
Corresponds indirectly to a file name part in the
section labeled 'Network dump files' in the MANAGER
FILES display.ro OCTET STRING .1.3.6.1.4.1.33.6.2.8.1.2 |
dumpFileEntryStatusThe status of the entry. Set to 'invalid' to
remove the entry, which corresponds indirectly to
the PURGE MANAGER DUMP FILES command. Actual
removal of the entry is implementation specific.rw Enumeration .1.3.6.1.4.1.33.6.2.8.1.3 |
dumpFileCreationThe time the dump file was created. Corresponds
directly to a date and time in the section labeled
'Network dump files' in the MANAGER FILES display.ro DateTime .1.3.6.1.4.1.33.6.2.8.1.4 |
dumpFileSizeThe number of bytes stored in the dump file.
Corresponds directly to the value labeled 'bytes' in
the section labeled 'Network dump files' in the
MANAGER FILES display.ro INTEGER .1.3.6.1.4.1.33.6.2.8.1.5 |
xLoad OBJECT IDENTIFIER .1.3.6.1.4.1.33.6.3 |
loadServiceControl for allowing load service for any client.
Corresponds directly to LOAD and the value labeled
'Load:' in the MANAGER CHARACTERISTICS display.rw Enumeration .1.3.6.1.4.1.33.6.3.1 |
loadMeritRelative preference for this load server over
others. Corresponds directly to LOAD MERIT and the
value labeled 'Load Merit:' in the MANAGER
CHARACTERISTICS display.rw INTEGER .1.3.6.1.4.1.33.6.3.2 |
loadCompletedThe number of loads completed since system
initialization. Corresponds directly to the value
labeled 'Load Operations Completed:' in the MANAGER
STATUS display.ro Counter .1.3.6.1.4.1.33.6.3.3 |
loadActiveThe number of loads in progress. Corresponds
directly to the value labeled 'Currently Loading:'
in the MANAGER STATUS display.ro Gauge .1.3.6.1.4.1.33.6.3.4 |
loadFileNumberThe number of load files currently stored.
Corresponds directly to the value labeled 'Load
image files' and 'files' in the MANAGER FILES
display.ro Gauge .1.3.6.1.4.1.33.6.3.5 |
loadFileTableA list of load file entries. The number of entries
is given by loadFileNumber. SEQUENCE OF LoadFileEntry .1.3.6.1.4.1.33.6.3.6 |
loadFileEntryParameter values for a load file entry. LoadFileEntry .1.3.6.1.4.1.33.6.3.6.1 |
loadFileNameThe name of a load file. Corresponds directly to a
file name part in the section labeled 'Load image
files' in the MANAGER FILES display.ro DisplayString .1.3.6.1.4.1.33.6.3.6.1.1 |
loadFileCreationThe time the load file was created. Corresponds
directly to a date and time in the section labeled
'Load image files' in the MANAGER FILES display.ro DateTime .1.3.6.1.4.1.33.6.3.6.1.2 |
loadFileSizeThe number of bytes stored in the load file.
Corresponds directly to the value labeled 'bytes' in
the section labeled 'Load image files' in the
MANAGER FILES display.ro INTEGER .1.3.6.1.4.1.33.6.3.6.1.3 |
loadFileSoftwareVersionTypeThe software version type of the image in the load
file. Corresponds directly to a software version in
the section labeled 'Load image files' in the
MANAGER FILES display.
alpha 'A': alpha test
beta 'B': beta test
production null: normal, production software
special 'S': special, custom softwarero Enumeration .1.3.6.1.4.1.33.6.3.6.1.4 |
loadFileSoftwareVersionThe software version of the image in the load file.
Corresponds directly to a software version in the
section labeled 'Load image files' in the MANAGER
FILES display.
For example, the version display for
loadFileSoftwareVersionType 'production' and
loadFileSoftwareVersion '2.2.0.0' is 'V2.2'.
The version display for loadFileSoftwareVersionType
'beta' and loadFileSoftwareVersion '3.1.0.4' is
'V3.1B4'.ro OCTET STRING .1.3.6.1.4.1.33.6.3.6.1.5 |
xParam OBJECT IDENTIFIER .1.3.6.1.4.1.33.6.4 |
paramServiceControl for allowing parameter storage service for
any client. Corresponds directly to PARAMETER
SERVICE and the value labeled 'Parameter Service:'
in the MANAGER CHARACTERISTICS display.rw Enumeration .1.3.6.1.4.1.33.6.4.1 |
paramDefaultServiceControl for allowing default parameter loading
service for any client. Corresponds directly to
PARAMETER DEFAULT SERVICE and the value labeled
'Parameter Default Service:' in the MANAGER
CHARACTERISTICS display.rw Enumeration .1.3.6.1.4.1.33.6.4.2 |
paramDriveIdentification number of the disk drive where
parameters are stored. Corresponds directly to
PARAMETER DRIVE and the value labeled 'Parameter
Drive:' in the MANAGER CHARACTERISTICS display.rw INTEGER .1.3.6.1.4.1.33.6.4.3 |
paramActiveThe number of params in progress. Corresponds
directly to the value labeled 'Currently Paraming:'
in the MANAGER STATUS display.ro Gauge .1.3.6.1.4.1.33.6.4.4 |
paramStorageActiveThe number of parameter storage operations in
progress. Corresponds directly to the value labeled
'Currently saving parameters:' in the MANAGER STATUS
display.ro Gauge .1.3.6.1.4.1.33.6.4.5 |
paramFileNumberThe number of parameter files currently stored.
Corresponds directly to the value labeled 'Parameter
files' and 'files' in the MANAGER FILES display.ro Gauge .1.3.6.1.4.1.33.6.4.6 |
paramFileTableA list of param file entries. The number of
entries is given by paramFileNumber. SEQUENCE OF ParamFileEntry .1.3.6.1.4.1.33.6.4.7 |
paramFileEntryParameter values for a param file entry. ParamFileEntry .1.3.6.1.4.1.33.6.4.7.1 |
paramFileIdentificationTypeThe type of identification value in
paramFileIdentification. Corresponds indirectly to
a file name part in the section labeled 'Parameter
files' in the MANAGER FILES display.ro AddressType .1.3.6.1.4.1.33.6.4.7.1.1 |
paramFileIdentificationIdentification of the param file, an Ethernet
address, as indicated by
paramFileIdentificationType. Corresponds indirectly
to a file name part in the section labeled
'Parameter files' in the MANAGER FILES display.ro OCTET STRING .1.3.6.1.4.1.33.6.4.7.1.2 |
paramFileEntryStatusThe status of the entry. Set to 'invalid' to
remove the entry, which corresponds indirectly to
the PURGE MANAGER PARAMETER FILES command. Actual
removal of the entry is implementation specific.rw Enumeration .1.3.6.1.4.1.33.6.4.7.1.3 |
paramFileWriteThe time the parameter file was last written.
Corresponds directly to a date and time in the
section labeled 'Parameter files' in the MANAGER
FILES display.ro DateTime .1.3.6.1.4.1.33.6.4.7.1.4 |
paramFileSizeThe number of bytes stored in the param file.
Corresponds directly to the value labeled 'bytes' in
the section labeled 'Parameter files' in the MANAGER
FILES display.ro INTEGER .1.3.6.1.4.1.33.6.4.7.1.5 |
paramFileParameterVersionThe version number of the parameter data in the
file. Corresponds directly to the value labeled
'ver' in the section labeled 'Parameter files' in
the MANAGER FILES display.ro INTEGER .1.3.6.1.4.1.33.6.4.7.1.6 |