MPLS-LC-FR-STD-MIB
Imported Objects
Objects
14 total| Object Name |
|---|
mplsLcFrStdMIBThis MIB module contains managed object definitions for
MPLS Label-Controlled Frame-Relay interfaces as defined
in (RFC3034).
Copyright (C) The Internet Society (2006). This
version of this MIB module is part of RFC 4368; see
the RFC itself for full legal notices. MODULE-IDENTITY .1.3.6.1.2.1.10.166.10 |
mplsLcFrStdNotifications OBJECT IDENTIFIER .1.3.6.1.2.1.10.166.10.0 |
mplsLcFrStdObjects OBJECT IDENTIFIER .1.3.6.1.2.1.10.166.10.1 |
mplsLcFrStdInterfaceConfTableThis table specifies per-interface MPLS LC-FR
capability and associated information. In particular,
this table sparsely extends the MPLS-LSR-STD-MIB's
mplsInterfaceConfTable. SEQUENCE OF MplsLcFrStdInterfaceConfEntry .1.3.6.1.2.1.10.166.10.1.1 |
mplsLcFrStdInterfaceConfEntryAn entry in this table is created by an LSR for
every interface capable of supporting MPLS LC-FR.
Each entry in this table will exist only if a
corresponding entry in ifTable and mplsInterfaceConfTable
exists. If the associated entries in ifTable and
mplsInterfaceConfTable are deleted, the corresponding
entry in this table must also be deleted shortly
thereafter. MplsLcFrStdInterfaceConfEntry .1.3.6.1.2.1.10.166.10.1.1.1 |
mplsLcFrStdTrafficMinDlciThis is the minimum DLCI value over which this
LSR is willing to accept traffic on this
interface.rw DLCI (FRAME-RELAY-DTE-MIB) .1.3.6.1.2.1.10.166.10.1.1.1.1 |
mplsLcFrStdTrafficMaxDlciThis is the max DLCI value over which this
LSR is willing to accept traffic on this
interface.rw DLCI (FRAME-RELAY-DTE-MIB) .1.3.6.1.2.1.10.166.10.1.1.1.2 |
mplsLcFrStdCtrlMinDlciThis is the min DLCI value over which this
LSR is willing to accept control traffic
on this interface.rw DLCI (FRAME-RELAY-DTE-MIB) .1.3.6.1.2.1.10.166.10.1.1.1.3 |
mplsLcFrStdCtrlMaxDlciThis is the max DLCI value over which this
LSR is willing to accept control traffic
on this interface.rw DLCI (FRAME-RELAY-DTE-MIB) .1.3.6.1.2.1.10.166.10.1.1.1.4 |
mplsLcFrStdInterfaceConfRowStatusThis object is used to create and
delete entries in this table. When configuring
entries in this table, the corresponding ifEntry and
mplsInterfaceConfEntry MUST exist beforehand. If a manager
attempts to create an entry for a corresponding
mplsInterfaceConfEntry that does not support LC-FR,
the agent MUST return an inconsistentValue error.
If this table is implemented read-only, then the
agent must set this object to active(1) when this
row is made active. If this table is implemented
writable, then an agent MUST not allow modification
to its objects once this value is set to active(1),
except to mplsLcFrStdInterfaceConfRowStatus and
mplsLcFrStdInterfaceConfStorageType.rw RowStatus (SNMPv2-TC) .1.3.6.1.2.1.10.166.10.1.1.1.5 |
mplsLcFrStdInterfaceConfStorageTypeThe storage type for this conceptual row.
Conceptual rows having the value 'permanent(4)'
need not allow write-access to any columnar
objects in the row.rw StorageType (SNMPv2-TC) .1.3.6.1.2.1.10.166.10.1.1.1.6 |
mplsLcFrStdConformance OBJECT IDENTIFIER .1.3.6.1.2.1.10.166.10.2 |
mplsLcFrStdCompliances OBJECT IDENTIFIER .1.3.6.1.2.1.10.166.10.2.1 |
mplsLcFrStdGroups OBJECT IDENTIFIER .1.3.6.1.2.1.10.166.10.2.2 |
More MIBs from Default
Browse all DefaultMIBs →SNMP MIB module
The AVAYA-WLAN-MIB provides SNMP-based management and monitoring capabilities for Avaya wireless LAN infrastructure, enabling the collection of performance metrics such as access point status, client association counts, signal strength, and radio interface statistics. This module facilitates the tracking of WLAN-specific events and configuration parameters to support network availability and troubleshooting within Avaya wireless deployments.
The VMWARE-NSX-MIB enables SNMP-based monitoring and management of VMware NSX-T Data Center virtual network infrastructure, exposing metrics for logical switches, routers, distributed firewalls, and overlay tunnel states. It facilitates the tracking of Layer 2 through Layer 7 service instances, including access control lists, Quality of Service policies, and virtual network topology changes within the software-defined networking environment.
Standard SNMP MIB module defining data structures for 923switch.m.
Standard SNMP MIB module defining data structures for CTATX-MIB.
SNMP MIB module