MPLS-LC-FR-MIB-DRAFT-01
AI MIB Summary
The MPLS-LC-FR-MIB-DRAFT-01 module provides managed object definitions for monitoring and configuring MPLS Label Controlled Frame-Relay interfaces, enabling the tracking of interface status, label binding states, and traffic statistics for Frame-Relay services encapsulated within an MPLS network as specified in RFC 3034.
This MIB contains managed object definitions for MPLS Label Controlled Frame-Relay interfaces as defined in RFC3034.
Main OID:
mplsLcFrMIB.1.3.6.1.2.1.10.166.1
14
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
14 total| Object Name |
|---|
mplsLcFrMIBThis MIB contains managed object definitions for
MPLS Label Controlled Frame-Relay interfaces as defined
in RFC3034. MODULE-IDENTITY .1.3.6.1.2.1.10.166.1 |
mplsLcFrNotifications OBJECT IDENTIFIER .1.3.6.1.2.1.10.166.1.0 |
mplsLcFrObjects OBJECT IDENTIFIER .1.3.6.1.2.1.10.166.1.1 |
mplsLcFrIfConfTableThis table specifies per-interface MPLS LC-FR
capability and associated information. In particular,
this table extends the MPLS-LSR MIB's
mplsInterfaceConfTable. SEQUENCE OF MplsLcFrIfConfEntry .1.3.6.1.2.1.10.166.1.1.1 |
mplsLcFrIfConfEntryAn entry in this table is created by an LSR for
every interface capable of supporting MPLS LC-FR.
Each entry in this table will exist only if a
corresponding entry in ifTable and mplsInterfaceConfTable
exist. If the associated entries in ifTable and
mplsInterfaceConfTable are deleted, the corresponding
entry in this table must also be deleted shortly
thereafter. MplsLcFrIfConfEntry .1.3.6.1.2.1.10.166.1.1.1.1 |
mplsLcFrTrafficMinDlciThis is the minimum DLCI value over which this
LSR is willing to accept traffic on this
interface.rw DLCI (FRAME-RELAY-DTE-MIB) .1.3.6.1.2.1.10.166.1.1.1.1.1 |
mplsLcFrTrafficMaxDlciThis is the max DLCI value over which this
LSR is willing to accept traffic on this
interface.rw DLCI (FRAME-RELAY-DTE-MIB) .1.3.6.1.2.1.10.166.1.1.1.1.2 |
mplsLcFrCtrlMinDlciThis is the min DLCI value over which this
LSR is willing to accept control traffic
on this interface.rw DLCI (FRAME-RELAY-DTE-MIB) .1.3.6.1.2.1.10.166.1.1.1.1.3 |
mplsLcFrCtrlMaxDlciThis is the max DLCI value over which this
LSR is willing to accept control traffic
on this interface.rw DLCI (FRAME-RELAY-DTE-MIB) .1.3.6.1.2.1.10.166.1.1.1.1.4 |
mplsLcFrIfConfRowStatusThis is object is used to create and
delete entries in this table. When configuring
entries in this table, the corresponding
corresponding ifEntry and mplsInterfaceConfEntry
MUST exist before hand. If an entry is attempted
to be created by a manager for a corresponding
mplsInterfaceConfEntry that does not support LC-FR,
the agent MUST return an inconsistentValue error.
If this table is implemented read-only, then the
agent must set this object to active(1) when this
row is made active. If this table is implemented
writable, then an agent MUST not allow modification
to its objects once this value is set to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.2.1.10.166.1.1.1.1.5 |
mplsLcFrIfConfStoreTypeThis SNMP storage type for this entry. All objects
are writable for permanent entries.rw StorageType (SNMPv2-TC) .1.3.6.1.2.1.10.166.1.1.1.1.6 |
mplsLcFrConformance OBJECT IDENTIFIER .1.3.6.1.2.1.10.166.1.2 |
mplsLcFrCompliances OBJECT IDENTIFIER .1.3.6.1.2.1.10.166.1.2.1 |
mplsLcFrGroups OBJECT IDENTIFIER .1.3.6.1.2.1.10.166.1.2.2 |