MPLS-ID-STD-MIB
Imported Objects
Objects
14 total| Object Name |
|---|
mplsIdStdMIBThis MIB module contains identifier object definitions for MPLS Traffic Engineering in transport networks. Copyright (c) 2015 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). MODULE-IDENTITY .1.3.6.1.2.1.10.166.18 |
mplsIdNotifications OBJECT IDENTIFIER .1.3.6.1.2.1.10.166.18.0 |
mplsIdObjects OBJECT IDENTIFIER .1.3.6.1.2.1.10.166.18.1 |
mplsIdGlobalIdThis object allows the operator or service provider to assign a unique operator identifier, also called the MPLS-TP Global_ID. If this value is used in mplsTunnelExtNodeConfigGlobalId for mapping Global_ID::Node_ID with the local identifier, then this object value MUST NOT be changed.rw MplsGlobalId (MPLS-TC-EXT-STD-MIB) .1.3.6.1.2.1.10.166.18.1.1 |
mplsIdNodeIdThis object allows the operator or service provider to assign a unique MPLS-TP Node_ID. The Node_ID is assigned within the scope of the Global_ID/ICC_Operator_ID. If this value is used in mplsTunnelExtNodeConfigNodeId for mapping Global_ID::Node_ID with the local identifier, then this object value SHOULD NOT be changed. If this value is used in mplsTunnelExtNodeConfigNodeId for mapping ICC_Operator_ID::Node_ID with the local identifier, then this object value MUST NOT be changed.rw MplsNodeId (MPLS-TC-EXT-STD-MIB) .1.3.6.1.2.1.10.166.18.1.2 |
mplsIdCcThis object allows the operator or service provider to assign a Country Code (CC) to the node. Global uniqueness of ICC is assured by concatenating the ICC with a Country Code (CC). If this value is used in mplsTunnelExtNodeConfigCcId for mapping ICC_Operator_ID::Node_ID with the local identifier, then this object value MUST NOT be changed.rw MplsCcId (MPLS-TC-EXT-STD-MIB) .1.3.6.1.2.1.10.166.18.1.3 |
mplsIdIccThis object allows the operator or service provider to assign a unique MPLS-TP ITU-T Carrier Code (ICC) to the node. Together, the CC and the ICC form the ICC_Operator_ID as CC::ICC. If this value is used in mplsTunnelExtNodeConfigIccId for mapping ICC_Operator_ID::Node_ID with the local identifier, then this object value MUST NOT be changed.rw MplsIccId (MPLS-TC-EXT-STD-MIB) .1.3.6.1.2.1.10.166.18.1.4 |
mplsIdConformance OBJECT IDENTIFIER .1.3.6.1.2.1.10.166.18.2 |
mplsIdCompliances OBJECT IDENTIFIER .1.3.6.1.2.1.10.166.18.2.1 |
mplsIdModuleFullComplianceCompliance statement for agents that provide full support of the MPLS-ID-STD-MIB module. Unknown .1.3.6.1.2.1.10.166.18.2.1.1 |
mplsIdModuleReadOnlyComplianceCompliance statement for agents that only provide read-only support for the MPLS-ID-STD-MIB module. Unknown .1.3.6.1.2.1.10.166.18.2.1.2 |
mplsIdGroups OBJECT IDENTIFIER .1.3.6.1.2.1.10.166.18.2.2 |
mplsIdIpOperatorGroupThe objects in this group are optional for an ICC-based node. Unknown .1.3.6.1.2.1.10.166.18.2.2.1 |
mplsIdIccOperatorGroupThe objects in this group are optional for an IP-based node. Unknown .1.3.6.1.2.1.10.166.18.2.2.2 |
More MIBs from Default
Browse all DefaultMIBs →SNMP MIB module
The AVAYA-WLAN-MIB provides SNMP-based management and monitoring capabilities for Avaya wireless LAN infrastructure, enabling the collection of performance metrics such as access point status, client association counts, signal strength, and radio interface statistics. This module facilitates the tracking of WLAN-specific events and configuration parameters to support network availability and troubleshooting within Avaya wireless deployments.
The VMWARE-NSX-MIB enables SNMP-based monitoring and management of VMware NSX-T Data Center virtual network infrastructure, exposing metrics for logical switches, routers, distributed firewalls, and overlay tunnel states. It facilitates the tracking of Layer 2 through Layer 7 service instances, including access control lists, Quality of Service policies, and virtual network topology changes within the software-defined networking environment.
Standard SNMP MIB module defining data structures for 923switch.m.
Standard SNMP MIB module defining data structures for CTATX-MIB.
SNMP MIB module