MPLS-DS-TE-MIB
This MIB contains managed object definitions for Diff-Serv-aware MPLS Traffic Engineering as described in [DSTEREQS][DSTEEXTS].
Main OID:
mplsDsTeMIB.1.3.6.1.3.9999
46
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
46 total| Object Name |
|---|
mplsDsTeMIBThis MIB contains managed object definitions for
Diff-Serv-aware MPLS Traffic Engineering as described in
[DSTEREQS][DSTEEXTS]. MODULE-IDENTITY .1.3.6.1.3.9999 |
mplsDsTeNotifications OBJECT IDENTIFIER .1.3.6.1.3.9999.0 |
mplsDsTeObjects OBJECT IDENTIFIER .1.3.6.1.3.9999.1 |
mplsDsTeScalarObjects OBJECT IDENTIFIER .1.3.6.1.3.9999.1.1 |
mplsDsTeNumConfIfsIndicates the number of interfaces which are configured for
DiffServ-Aware TE MPLS capability on this device.ro Unsigned32 .1.3.6.1.3.9999.1.1.1 |
mplsDsTeIfConfTableThis table specifies per-interface DiffServ-Aware TE MPLS
capability and associated information. The entries in this
table correspond to MPLS-enabled interfaces which must also be
present in the mplsInterfaceConfTable [LSR-MIB]. SEQUENCE OF MplsDsTeIfConfEntry .1.3.6.1.3.9999.1.2 |
mplsDsTeIfConfEntryAn entry in this table is created by an LSR for every
interface capable of supporting MPLS DiffServ-Aware Traffic
Engineering. Each entry in this table should correspond to an
entry in the mplsInterfaceConfTable [LSR-MIB], and will have a
corresponding Interfaces MIB entry as well. Administrators
wishing to enable the DS-TE feature on an interface without
this feature already enabled should first create entries in
the MPLS interface conf table in the MPLS-LSR-MIB. Next, the
agent should create a corresponding entry in this table to
specifically enable the DS-TE feature on the MPLS
interface. This order or operation should be enforced by the
agent to preserve consistency and interoperability. This table
'extends' the Interfaces MIB in that each entry in this table
MUST correspond to an entry in the Interfaces MIB. Therefore
the index used in this table must correspond to one found in
the Interfaces MIB. MplsDsTeIfConfEntry .1.3.6.1.3.9999.1.2.1 |
mplsDsTeIfConfIndexThis is a unique index for an entry in the
MplsDsTeIfConfTable. A non-zero index for an entry indicates
the ifIndex for the corresponding Interfaces MIB entry. Note
that this table does not necessarily correspond one-to-one with
all entries in the Interface MIB having an ifType of
MPLS-layer; rather, only those which are enabled for MPLS
DiffServ-Aware TE functionality.ro InterfaceIndex (IF-MIB) .1.3.6.1.3.9999.1.2.1.1 |
mplsDsTeIfMaxAggrResBwThe maximum bandwidth reservable on an aggregated basis among all
bandwidth classes. Note that overbooking of this value is
allowed, and sometimes desirable.rw Unsigned32 .1.3.6.1.3.9999.1.2.1.2 |
mplsDsTeIfMaxAddrUnresBwThe maximum bandwidth which is un-reservable on an aggregated basis
among all bandwidth classes. Note that overbooking of this value
is allowed, and sometimes desirable.rw Unsigned32 .1.3.6.1.3.9999.1.2.1.3 |
mplsDsTeIfAggrResBwUsedThe amount of reservable bandwidth which currently in use an
aggregated basis among all bandwidth classes.ro Unsigned32 .1.3.6.1.3.9999.1.2.1.4 |
mplsDsTeIfAggrUnresBwUsedThe amount of un-reservable bandwidth which currently in use an
aggregated basis among all bandwidth classes.ro Unsigned32 .1.3.6.1.3.9999.1.2.1.5 |
mplsDsTeIfAdminStatusThis object is used to indicate the desired DiffServ-Aware TE
functionality status (i.e.: enable/disable) on the corresponding
MPLS interface.rw Enumeration .1.3.6.1.3.9999.1.2.1.6 |
mplsDsTeIfOperStatusThis object is used to indicate the actual status of the
DiffServ-Aware TE feature on this interface.ro Enumeration .1.3.6.1.3.9999.1.2.1.7 |
mplsDsTeIfConfRowStatusThe row status for a row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.3.9999.1.2.1.8 |
mplsDsTeIfConfStorageTypeThe storage type for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.3.9999.1.2.1.9 |
mplsDsTeIfClassTypeTableThis table specifies per-interface DiffServ-Aware TE class
type information. This table AUGMENTS the
mplsDsTeIfConfTable. SEQUENCE OF MplsDsTeIfClassTypeEntry .1.3.6.1.3.9999.1.3 |
mplsDsTeLspTableThis table indicates which DiffServ-Aware TE class particular
LSPs. This table 'extends' the mplsXCTable, as it uses the
same indexing scheme utilized therein. SEQUENCE OF MplsDsTeLspEntry .1.3.6.1.3.9999.1.4 |
mplsDsTeLspEntryAn entry in this table is created by an LSR for every LSP
capable of supporting MPLS DiffServ-Aware Traffic
Engineering. Specifically, an entry in this table must
correspond to an entry in the mplsXCTable from the
MPLS-LSR-MIB [MPLS-LSR-MIB]. MplsDsTeLspEntry .1.3.6.1.3.9999.1.4.1 |
mplsDsTeLspXCIndexThis value indicates the primary index of the LSP which can be
found in the MPLS-LSR-MIB's [LSR-MIB] XCTable. The entry MUST
exist in the MPLS-LSR-MIB before an entry in this table may be
transition into the operStatus of up(1). If the entry is not
ready or has not yet been created in the MPLS-LSR-MIB, the
operStatus of this value must contain the value notPresent(6)
to indicate that this entry will be activated as soon as the
entry is available in the MPLS-LSR-MIB.rw Integer32 .1.3.6.1.3.9999.1.4.1.1 |
mplsDsTeLspInSegmentIfIndexThis value indicates the secondary index of the LSP which can be
found in the MPLS-LSR-MIB's [LSR-MIB] XCTable. The entry MUST
exist in the MPLS-LSR-MIB before an entry in this table may be
transition into the operStatus of up(1). If the entry is not
ready or has not yet been created in the MPLS-LSR-MIB, the
operStatus of this value must contain the value notPresent(6)
to indicate that this entry will be activated as soon as the
entry is available in the MPLS-LSR-MIB.rw InterfaceIndex (IF-MIB) .1.3.6.1.3.9999.1.4.1.2 |
mplsDsTeLspInSegmentLabelThis value indicates the tertiary index of the LSP which can be
found in the MPLS-LSR-MIB's [LSR-MIB] XCTable. The entry MUST
exist in the MPLS-LSR-MIB before an entry in this table may be
transition into the operStatus of up(1). If the entry is not
ready or has not yet been created in the MPLS-LSR-MIB, the
operStatus of this value must contain the value notPresent(6)
to indicate that this entry will be activated as soon as the
entry is available in the MPLS-LSR-MIB.rw MplsLabel (MPLS-LSR-MIB) .1.3.6.1.3.9999.1.4.1.3 |
mplsDsTeLspOutSegmentIndexThis value indicates the fourth index of the LSP which can be
found in the MPLS-LSR-MIB's [LSR-MIB] XCTable. The entry MUST
exist in the MPLS-LSR-MIB before an entry in this table may be
transition into the operStatus of up(1). If the entry is not
ready or has not yet been created in the MPLS-LSR-MIB, the
operStatus of this value must contain the value notPresent(6)
to indicate that this entry will be activated as soon as the
entry is available in the MPLS-LSR-MIB.rw Integer32 .1.3.6.1.3.9999.1.4.1.4 |
mplsDsTeTunTableThis table indicates which DiffServ-Aware TE class particular
Traffic Engineering tunnels have been assigned to. This table
'extends' the mplsTunnelTable from the MPLS-TE-MIB[TEMIB], as
it uses the same indexing scheme utilized therein. SEQUENCE OF MplsDsTeTunEntry .1.3.6.1.3.9999.1.5 |
mplsDsTeTunEntryAn entry in this table is created by an LSR for every traffic
engineering tunnel instance capable of supporting MPLS
DiffServ-Aware Traffic Engineering. We must include all
indexes here to indicate which instances of tunnels are in
which bandwidth class, as it is entirely possible (and
sometimes desirable) to include different instances in
different classes. MplsDsTeTunEntry .1.3.6.1.3.9999.1.5.1 |
mplsDsTeTunTunnelIndexThis value indicates the primary index of the tunnel entry
which can be found in the MPLS-TE-MIB's [TEMIB]
mplsTunnelTable. The entry MUST exist in the MPLS-TE-MIB before
an entry in this table may be transition into the operStatus of
up(1). If the entry is not ready or has not yet been created in
the MPLS-TE-MIB, the operStatus of this value must contain the
value notPresent(6) to indicate that this entry will be
activated as soon as the entry is available in the MPLS-TE-MIB.rw MplsTunnelIndex .1.3.6.1.3.9999.1.5.1.1 |
mplsDsTeTunTunnelInstanceThis value indicates the secondary index of the tunnel entry
which can be found in the MPLS-TE-MIB's [TEMIB]
mplsTunnelTable. The entry MUST exist in the MPLS-TE-MIB before
an entry in this table may be transition into the operStatus of
up(1). If the entry is not ready or has not yet been created in
the MPLS-TE-MIB, the operStatus of this value must contain the
value notPresent(6) to indicate that this entry will be
activated as soon as the entry is available in the
MPLS-TE-MIB.rw MplsTunnelInstanceIndex .1.3.6.1.3.9999.1.5.1.2 |
mplsDsTeTunTunnelIngressLSRIdThis value indicates the third index of the tunnel entry
which can be found in the MPLS-TE-MIB's [TEMIB]
mplsTunnelTable. The entry MUST exist in the MPLS-TE-MIB before
an entry in this table may be transition into the operStatus of
up(1). If the entry is not ready or has not yet been created in
the MPLS-TE-MIB, the operStatus of this value must contain the
value notPresent(6) to indicate that this entry will be
activated as soon as the entry is available in the
MPLS-TE-MIB.rw MplsLsrId .1.3.6.1.3.9999.1.5.1.3 |
mplsDsTeTunTunnelEgressLSRIdThis value indicates the fourth index of the tunnel entry
which can be found in the MPLS-TE-MIB's [TEMIB]
mplsTunnelTable. The entry MUST exist in the MPLS-TE-MIB before
an entry in this table may be transition into the operStatus of
up(1). If the entry is not ready or has not yet been created in
the MPLS-TE-MIB, the operStatus of this value must contain the
value notPresent(6) to indicate that this entry will be
activated as soon as the entry is available in the
MPLS-TE-MIB.rw MplsLsrId .1.3.6.1.3.9999.1.5.1.4 |
mplsDsTeLspClassTypeThis object indicates the DiffServ-Aware TE class to which this
LSP has been assigned.ro Integer32 .1.3.6.1.3.9999.1.5.1.5 |
mplsDsTeLspAdminStatusThis object is used to indicate the desired DiffServ-Aware
TE functionality status (i.e.: enable/disable) on this LSP.rw Enumeration .1.3.6.1.3.9999.1.5.1.6 |
mplsDsTeLspOperStatusThis object is used to indicate the actual status of the
DiffServ-Aware TE feature on this LSP.ro Enumeration .1.3.6.1.3.9999.1.5.1.7 |
mplsDsTeLspRowStatusThe row status for a row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.3.9999.1.5.1.8 |
mplsDsTeLspStorageTypeThe storage type for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.3.9999.1.5.1.9 |
mplsDsTeConformance OBJECT IDENTIFIER .1.3.6.1.3.9999.2 |
mplsDsTeGroups OBJECT IDENTIFIER .1.3.6.1.3.9999.2.1 |
mplsDsTeCompliances OBJECT IDENTIFIER .1.3.6.1.3.9999.2.2 |
mplsDsTeIfClassTypeEntryAn entry in this table is created by an LSR for every
interface capable of supporting MPLS DiffServ-Aware Traffic
Engineering. Specifically, an entry in this table must
correspond to an entry in the mplsDsTeIfConfTable. Each entry
in this table corresponds to a specific class type associated
with an interface. The entries in this table are used to
expose the bandwidth classes associated with each
interface. At the moment, only 4 bandwidth classes are
supported. MplsDsTeIfClassTypeEntry .mplsDsTeClassTypeTable.1 |
mplsDsTeIfClassTypeZeroMaxResBwThis value indicates the maximum reservable bandwidth for
class type 0.rw InterfaceIndex (IF-MIB) .mplsDsTeClassTypeTable.1.1 |
mplsDsTeIfClassTypeZeroUnresBwThis value indicates the maximum unreservable bandwidth for
class type 0.rw InterfaceIndex (IF-MIB) .mplsDsTeClassTypeTable.1.2 |
mplsDsTeIfClassTypeOneMaxResBwThis value indicates the maximum reservable bandwidth for
class type 1.rw InterfaceIndex (IF-MIB) .mplsDsTeClassTypeTable.1.3 |
mplsDsTeIfClassTypeOneUnresBwThis value indicates the maximum unreservable bandwidth for
class type 1.rw InterfaceIndex (IF-MIB) .mplsDsTeClassTypeTable.1.4 |
mplsDsTeIfClassTypeTwoMaxResBwThis value indicates the maximum reservable bandwidth for
class type 2.rw InterfaceIndex (IF-MIB) .mplsDsTeClassTypeTable.1.5 |
mplsDsTeIfClassTypeTwoUnresBwThis value indicates the maximum unreservable bandwidth for
class type 2.rw InterfaceIndex (IF-MIB) .mplsDsTeClassTypeTable.1.6 |
mplsDsTeIfClassTypeThreeMaxResBwThis value indicates the maximum reservable bandwidth for class
type 3.rw InterfaceIndex (IF-MIB) .mplsDsTeClassTypeTable.1.7 |
mplsDsTeIfClassTypeThreeUnresBwThis value indicates the maximum unreservable bandwidth for
class type 3.rw InterfaceIndex (IF-MIB) .mplsDsTeClassTypeTable.1.8 |