MIP-UDPTUNNEL-MIB
Imported Objects
Objects
18 total| Object Name |
|---|
mipUdpTunnelMIBThe MIB module for configuring and displaying Mobile
IP Traversal of Network Address Translation (NAT)
Devices information.
Copyright (C) IETF Trust (2007). This version
of this MIB module is part of RFC yyyy; see the RFC
itself for full legal notices. MODULE-IDENTITY .1.3.6.1.4.1.727.7.2.1.44.4 |
mipUdpTunnelMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.727.7.2.1.44.4.1 |
mnUdpTunnel OBJECT IDENTIFIER .1.3.6.1.4.1.727.7.2.1.44.4.1.1 |
mnUdpTunnelEnableThis parameter enables and disables the RFC 3519 UDP
tunneling function in the MN completely.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.727.7.2.1.44.4.1.1.1 |
mnUdpTunnelForceThis parameter enables (or disables) the MN to set
the F (force) flag. It indicates that the mobile
node wants to use traversal regardless of the
outcome of NAT detection performed by the home agent.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.727.7.2.1.44.4.1.1.2 |
mnUdpTunnelKeepaliveIntervalDefines the default NAT keepalive interval that the
mobile node will use in the case that the HA does
not impose another value by setting the Keepalive
Interval in the UDP Tunnel Reply Extension.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.727.7.2.1.44.4.1.1.3 |
haUdpTunnel OBJECT IDENTIFIER .1.3.6.1.4.1.727.7.2.1.44.4.1.2 |
haUdpTunnelEnableThis parameter enables and disables the RFC 3519 UDP
tunneling function in the HA completely.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.727.7.2.1.44.4.1.2.1 |
haUdpTunnelKeepaliveIntervalThis parameter sets the keepalive interval override.
Normally, the MN uses the keepalive time that was
configured using UDP tunneling and sending
keepalive messages. The HA can override this
configured keepalive time by setting a new
interval value for this parameter to a value other
than zero.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.727.7.2.1.44.4.1.2.2 |
haUdpTunnelForceThis parameter enables and disables the HA forcing all
connections from MNs which support RFC 3519 UDP
tunneling to use tunneling whether or not the
presence of a NAT is detected.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.727.7.2.1.44.4.1.2.3 |
haUdpTunnelEncapUnavailTotal number of Registration Requests denied by the
home agent
unavailable (code 142).ro Counter32 .1.3.6.1.4.1.727.7.2.1.44.4.1.2.4 |
faUdpTunnel OBJECT IDENTIFIER .1.3.6.1.4.1.727.7.2.1.44.4.1.3 |
faUdpTunnelEnableThis parameter enables and disables the RFC 3519 UDP
tunneling function in the FA completely.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.727.7.2.1.44.4.1.3.1 |
faUdpTunnelForceThis parameter enables (or disables) the FA to set
the F (force) flag. It indicates that the foreign
agent wants to use traversal regardless of the
outcome of NAT detection performed by the home agent.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.727.7.2.1.44.4.1.3.2 |
faUdpTunnelKeepaliveIntervalDefines the default NAT keepalive interval that the
foreign agent will use in the case that the HA does
not impose another value by setting the Keepalive
Interval in the UDP Tunnel Reply Extension.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.727.7.2.1.44.4.1.3.3 |
mipUdpTunnelConformance OBJECT IDENTIFIER .1.3.6.1.4.1.727.7.2.1.44.4.2 |
mipUdpTunnelGroups OBJECT IDENTIFIER .1.3.6.1.4.1.727.7.2.1.44.4.2.1 |
mipUdpTunnelCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.727.7.2.1.44.4.2.2 |
More MIBs from Presticom
Browse all PresticomMIBs →SNMP MIB module
Standard SNMP MIB module defining data structures for CLEARTRAC7-MIB.
SNMP MIB module
The APPN-MIB provides standardized SNMP objects to monitor and manage Advanced Peer-to-Peer Networking (APPN) instances on network devices, specifically tracking high-level topology elements such as network nodes, logical links, and session states. It enables administrators to observe APPN-specific performance metrics including node availability, link utilization, and the status of dynamic routing tables within the SNA over TCP/IP or native SNA environments.
The APPC-MIB facilitates the monitoring and management of IBM Systems Network Architecture (SNA) Advanced Program-to-Program Communication (APPC) sessions and logical units on network devices. It exposes specific metrics including session states, connection establishment failures, and resource utilization counters to enable troubleshooting of legacy SNA over IP or TCP/IP transport layers.
Standard SNMP MIB module defining data structures for APPLETALK-MIB.