MICOMETHER
Detailed view of the defined objects, syntax rules, and hierarchical paths.
Imported Objects
Objects
8 total| Object Name |
|---|
mcmEth OBJECT IDENTIFIER .micom-oscar.10 |
MICOM-OSCAR-MIB Unknown .micom-oscar.10 |
mcmEthCntr OBJECT IDENTIFIER .micom-oscar.10.1 |
mcmEthCntrZeroTableNAME = ;
DESC = This table was obsoleted as of release \
3.0; and is included here only to support \
backwards compatibility for software \
versions prior to release 3.0. \
A table that contains the ethernet Port\
specific information regarding counters\
that can be Zeroed.;
HELP = A table that contains port-specific \
information for the MICOM Port Counter \
Zeroing.;
CAPABILITIES = NET_CFG, VPN_CFG;obsolete SEQUENCE OF McmEthCntrZeroEntry .micom-oscar.10.1.1 |
mcmEthCntrZeroEntryNAME = ;
DESC = This object was obsoleted as of release \
3.0; and is included here only to support \
backwards compatibility for software \
versions prior to release 3.0. \
The list of information maintained by\
the ethernet Port specific to the\
ethernet counters.;
HELP = A list of information maintained by \
every port about the MICOM E-type Filter \
parameters for that port.;
CAPABILITIES = ;obsolete McmEthCntrZeroEntry .micom-oscar.10.1.1.1 |
mcmEthCntrZeroPortNAME = ;
DESC = This object was obsoleted as of release \
3.0; and is included here only to support \
backwards compatibility for software \
versions prior to release 3.0. \
The ethernet Port that these counters\
pertain to.;
HELP = The Port to which this entry pertains.;
CAPABILITIES = ;rwobsolete INTEGER .micom-oscar.10.1.1.1.1 |
mcmEthStatsGrpCounterZeroNAME = ;
DESC = This object was obsoleted as of release \
3.0; and is included here only to support \
backwards compatibility for software \
versions prior to release 3.0. \
When reset counter information is performed,\
the ethernet statistic group counter info.\
collected will reset to zero.;
HELP = When set to reset, the StatsGrp Counters \
should be zeroed out.;
CAPABILITIES = ;rwobsolete Enumeration .micom-oscar.10.1.1.1.2 |
mcmEthCollStatsGrpCounterZeroNAME = ;
DESC = This object was obsoleted as of release \
3.0; and is included here only to support \
backwards compatibility for software \
versions prior to release 3.0. \
When reset counter information is performed,\
the ethernet collusion statistics group counter\
information collected will reset to Zero.;
HELP = When set to reset, the Collision StatsGrp \
Counters should be zeroed out.;
CAPABILITIES = ;rwobsolete Enumeration .micom-oscar.10.1.1.1.3 |
More MIBs from Default
Browse all DefaultMIBs →SNMP MIB module
The AVAYA-WLAN-MIB provides SNMP-based management and monitoring capabilities for Avaya wireless LAN infrastructure, enabling the collection of performance metrics such as access point status, client association counts, signal strength, and radio interface statistics. This module facilitates the tracking of WLAN-specific events and configuration parameters to support network availability and troubleshooting within Avaya wireless deployments.
The VMWARE-NSX-MIB enables SNMP-based monitoring and management of VMware NSX-T Data Center virtual network infrastructure, exposing metrics for logical switches, routers, distributed firewalls, and overlay tunnel states. It facilitates the tracking of Layer 2 through Layer 7 service instances, including access control lists, Quality of Service policies, and virtual network topology changes within the software-defined networking environment.
Standard SNMP MIB module defining data structures for 923switch.m.
Standard SNMP MIB module defining data structures for CTATX-MIB.
SNMP MIB module