Home/Catalog/MICOMBRGEXT

MICOMBRGEXT

AI MIB Summary

Standard SNMP MIB module defining data structures for MICOMBRGEXT.

109
Objects
Active
Status
2
Dependencies

Imported Objects

Objects

109 total
Object Name
mcmBrg
OBJECT IDENTIFIER
.micom-oscar.6
MICOM-OSCAR-MIB
Unknown
.micom-oscar.6
mcmBrgGlobalParamGroup
OBJECT IDENTIFIER
.micom-oscar.6.1
mcmBrgIPBridgedNAME = ; DESC = IP is being bridged or Routed.; HELP = Is IP being Bridged or Routed?; CAPABILITIES = NET_CFG, VPN_CFG;ro
Enumeration
.micom-oscar.6.1.1
mcmBrgNumInterfacesNAME = ; DESC = The number of ports(ethernet & wan) \ that the access device has.; HELP = The number of ports this bridge has.; CAPABILITIES = NET_CFG, VPN_CFG;ro
INTEGER
.micom-oscar.6.1.2
mcmBrgSpanEnableNAME = ; DESC = The current state of the Spanning \ tree Algorithm on the access device.; HELP = Spanning-Tree Algorithm Enabled?; CAPABILITIES = NET_CFG, VPN_CFG;ro
Enumeration
.micom-oscar.6.1.3
mcmBrgSpoofEnableNAME = ; DESC = IP-ARP spoofing -when enabled, access device \ intercepts most ARP bcasts and handle them locally \ to reduce the amount of bcast pkts fwded across WAN.; HELP = IP-ARP Spoofing Enabled?; CAPABILITIES = NET_CFG, VPN_CFG;ro
Enumeration
.micom-oscar.6.1.4
mcmBrgAgeTimeNAME = ; DESC = Aging time for dynamically learned devices \ in forwarding Table.; HELP = The timeout period in seconds for aging \ out dynamically learned forwarding \ information. 802.1D-1990 recommends \ a default of 300 seconds. Mirror object \ of dot1dTpAgingTime.; CAPABILITIES = NET_CFG, VPN_CFG;ro
INTEGER
.micom-oscar.6.1.5
mcmBrgMiscParamGroup
OBJECT IDENTIFIER
.micom-oscar.6.2
mcmBrgDebugEnableNAME = ; DESC = The access device capability to generate controlled \ number of debugging messages to CLI for \ the purpose of debugging some bridge \ status.; HELP = Bridge Debugging Enabled?; CAPABILITIES = NET_CFG, VPN_DISP;rw
Enumeration
.micom-oscar.6.2.1
mcmBrgSpanDebugEnableNAME = ; DESC = The access device capability to debug spanning \ tree algorithm.; HELP = Spanning-Tree Debugging Enabled?; CAPABILITIES = NET_CFG, VPN_DISP;rw
Enumeration
.micom-oscar.6.2.2
mcmBrgSpoofCacheAgeNAME = ; DESC = The aging time for entries in the ARP Spoof\ cache table to specified by the cache timeout \ to make room for active entries.; HELP = The Aging Time for the ARP Spoof Cache.; CAPABILITIES = NET_CFG, VPN_CFG;rw
INTEGER
.micom-oscar.6.2.3
mcmBrgSpoofThresholdAgeNAME = ; DESC = The Aging Time for the ARP Spoofcache Threshold \ in seconds.(60 .. 1800 sec).; HELP = The Aging Time for the ARP Spoof Threshold.; CAPABILITIES = NET_CFG, VPN_CFG;rw
INTEGER
.micom-oscar.6.2.4
mcmBrgSpoofThresholdCountNAME = ; DESC = The ARP Spoof Threshold count- allows \ the max number of consecutive outstanding \ ARP request per destination node.; HELP = The ARP Spoof Threshold count.; CAPABILITIES = NET_CFG, VPN_CFG;rw
INTEGER
.micom-oscar.6.2.5
mcmBrgConfPortTableNAME = ; DESC = A config Table that contains port-specific \ information for the access device Bridge \ Configuration information.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
SEQUENCE OF McmBrgConfPortEntry
.micom-oscar.6.3
mcmBrgConfPortEntryNAME = ; DESC = Configuration parameter information maintained by \ each Port that are being used by the access \ device.; HELP = ; CAPABILITIES = ;
McmBrgConfPortEntry
.micom-oscar.6.3.1
mcmBrgConfPortIndexNAME = ; DESC = The Port Index to which this entry pertains.; HELP = ; CAPABILITIES = ;ro
INTEGER
.micom-oscar.6.3.1.1
mcmBrgConfPortPPANAME = ; DESC = The Protocol Point of Access to which \ this entry pertains.; HELP = ; CAPABILITIES = ;ro
INTEGER
.micom-oscar.6.3.1.2
mcmBrgConfPortTypeNAME = ; DESC = The Type of the interface this port \ is attached to.; HELP = ; CAPABILITIES = ;ro
Enumeration
.micom-oscar.6.3.1.3
mcmBrgConfPortMacFilterFlagNAME = ; DESC = When MAC address filtering is needed on a \ specific port, enable MAC filter Flag. \ Otherwise, disable the MAC Filetr Flag.; HELP = Is MAC Filtering enabled?; CAPABILITIES = ;rw
Enumeration
.micom-oscar.6.3.1.4
mcmBrgConfPortEtFilterFlagNAME = ; DESC = When E-type filtering is needed on a specific \ port, enable E-type filter Flag. Otherwise, \ disable E-type Filter Flag.; HELP = Is E-type Filtering enabled?; CAPABILITIES = ;rw
Enumeration
.micom-oscar.6.3.1.5
mcmBrgConfPortSapFilterFlagNAME = ; DESC = When SAP filtering is needed on a specific \ port, enable SAP filter flag. Otherwise, \ disable the SAP filter flag.; HELP = Is SAP Filtering enabled?; CAPABILITIES = ;rw
Enumeration
.micom-oscar.6.3.1.6
mcmBrgConfPortMacInclExclNAME = ; DESC = If Inclusive MAC filtering is set, only \ addresses in the table are filtered/discarded.\ If Exclusive, allow only addresses in the \ table to be accepted/learned.; HELP = Inclusive or Exclusive Mac Filtering?; CAPABILITIES = ;rw
Enumeration
.micom-oscar.6.3.1.7
mcmBrgConfPortEtInclExclNAME = ; DESC = If Inclusive E-Type filtering is set, only \ E-Type in the table are filtered/discarded.\ If Exclusive, allow only E-Type in the \ table to be accepted/learned.; HELP = Inclusive or Exclusive Et Filtering?; CAPABILITIES = ;rw
Enumeration
.micom-oscar.6.3.1.8
mcmBrgConfPortSapInclExclNAME = ; DESC = If Inclusive Sap Type filtering is set, only \ Sap Types in the Table are filtered/discarded. \ If Exclusive, allow only Sap Types in the \ table to be accepted/learned.; HELP = Inclusive or Exclusive Sap Filtering?; CAPABILITIES = ;rw
Enumeration
.micom-oscar.6.3.1.9
mcmBrgMacFilterTableNAME = ; DESC = A table that contains port-specific \ information for the access device MAC Filter \ info including the source & destination.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
SEQUENCE OF McmBrgMacFilterEntry
.micom-oscar.6.4
mcmBrgMacFilterEntryNAME = ; DESC = MAC Filter parameter information maintained by \ every port that the access device uses.; HELP = ; CAPABILITIES = ;
McmBrgMacFilterEntry
.micom-oscar.6.4.1
mcmBrgMacFilterPortIndexNAME = ; DESC = The Port Index particular to this entry.; HELP = ; CAPABILITIES = ;rw
INTEGER
.micom-oscar.6.4.1.1
mcmBrgMacFilterNumberNAME = ; DESC = The Filter number associated with the entry.; HELP = ; CAPABILITIES = ;rw
INTEGER
.micom-oscar.6.4.1.2
mcmBrgMacAddressNAME = ; DESC = The MAC address(HW address) that needs to be \ filtered.; HELP = ; CAPABILITIES = ;rw
MacAddress (SNMPv2-TC)
.micom-oscar.6.4.1.3
mcmBrgMacTypeNAME = ; DESC = Filter based on source MAC address or \ destination MAC address.; HELP = The type of the MAC Address. By setting \ it to invalid one can invalidate the \ entry.; CAPABILITIES = ;rw
Enumeration
.micom-oscar.6.4.1.4
mcmBrgEtFilterTableNAME = ; DESC = A table that contains port-specific \ information for the access device \ E-type Filter.; HELP = CAPABILITIES = NET_CFG, VPN_CFG;
SEQUENCE OF McmBrgEtFilterEntry
.micom-oscar.6.5
mcmBrgEtFilterEntryNAME = ; DESC = A list of information maintained by \ each port about the access device \ E-type Filter parameters for that port.; HELP = CAPABILITIES = ;
McmBrgEtFilterEntry
.micom-oscar.6.5.1
mcmBrgEtFilterPortIndexNAME = ; DESC = The port Index particular to this port.; HELP = ; CAPABILITIES = ;rw
INTEGER
.micom-oscar.6.5.1.1
mcmBrgEtFilterNumberNAME = ; DESC = The Filter number associated with the \ port Index.; HELP = ; CAPABILITIES = ;rw
INTEGER
.micom-oscar.6.5.1.2
mcmBrgEtFilterStatusNAME = ; DESC = An indication as to whether the filter \^M is specified as a single e-type or as a range of \ as a range of e-types.; ; HELP = HELP = Setting the value tp invalid, has the effect of \ the entry,; CAPABILITIES = ;rw
Enumeration
.micom-oscar.6.5.1.3
mcmBrgEtFilterETypeNAME = ; DESC = The singular e-type to be filtered.; HELP = The value of this object is valid only \ if the mcmBrgEtFilterStatus (above) \ is singular.; CAPABILITIES = ;rw
INTEGER
.micom-oscar.6.5.1.4
mcmBrgEtFilterUpperRangeNAME = ; DESC = DESC = The Upper Range of the E-type to be \ filtered. Range is between 0 - 65535.; HELP = This object is valid only if the \ mcmBrgEtFilterStatus (above) is range.; CAPABILITIES = ;rw
INTEGER
.micom-oscar.6.5.1.5
mcmBrgEtFilterLowerRangeNAME = ; DESC = The lower Range of the E-type to be \ filtered. Range is between 0 - 65535.; HELP = This object is valid only \ if the mcmBrgEtFilterStatus (above) \ is range.; CAPABILITIES = ;rw
INTEGER
.micom-oscar.6.5.1.6
mcmBrgSapFilterTableNAME = ; DESC = A table that contains port-specific \ information for the access device E-type \ Filter information. (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
SEQUENCE OF McmBrgSapFilterEntry
.micom-oscar.6.6
mcmBrgSapFilterEntryNAME = ; DESC = A list of information maintained by \ every port about the access device E-type Filter \ parameters for that port. (Operational); HELP = ; CAPABILITIES = ;
McmBrgSapFilterEntry
.micom-oscar.6.6.1
mcmBrgSapFilterPortIndexNAME = ; DESC = ; HELP = The Port Index to which this entry pertains.; CAPABILITIES = ;rw
INTEGER
.micom-oscar.6.6.1.1
mcmBrgSapFilterNumberNAME = ; DESC = The Filter number associated with the \ port Index.; HELP = ; CAPABILITIES = ;rw
INTEGER
.micom-oscar.6.6.1.2
mcmBrgSapFilterStatusNAME = ; DESC = An indication as to whether the filter \ is specified as a single e-type or \ as a range of e-types.; HELP = Setting the value to invalid has the \ effect of deleteing the entry.;; CAPABILITIES = ;rw
Enumeration
.micom-oscar.6.6.1.3
mcmBrgSapFilterETypeNAME = ; DESC = The singular e-type to be filtered.; HELP = The value of this object is valid only \ if the mcmBrgSapFilterStatus (above) \ is singular.; CAPABILITIES = ;rw
INTEGER
.micom-oscar.6.6.1.4
mcmBrgSapFilterUpperRangeNAME = ; DESC = The Upper Range of the E-type to be \ filtered.; HELP = This object is valid only if the \ mcmBrgSapFilterStatus (above) \ is range.; CAPABILITIES = ;rw
INTEGER
.micom-oscar.6.6.1.5
mcmBrgSapFilterLowerRangeNAME = ; DESC = The lower Range of the E-type to be \ filtered.; HELP = This object is valid only if the \ mcmBrgSapFilterStatus (above) \ is range.; CAPABILITIES = ;rw
INTEGER
.micom-oscar.6.6.1.6
nvmBrgGlobalParamGroup
OBJECT IDENTIFIER
.micom-oscar.6.7
nvmBrgIPBridgedNAME = ; DESC = IP is being bridged or Routed in the access device.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;rw
Enumeration
.micom-oscar.6.7.1
nvmBrgNumInterfacesNAME = ; DESC = The number of ethernet and WAN ports that \ the access device has.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;rw
INTEGER
.micom-oscar.6.7.2
nvmBrgSpanEnableNAME = ; DESC = The current state of the Spanning \ tree Algorithm on the access device is enabled \ or disabled.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;rw
Enumeration
.micom-oscar.6.7.3
nvmBrgSpoofEnableNAME = ; DESC = IP-ARP spoofing -when enabled,access device intercepts\ most ARP bcasts and handle them locally to \ reduce the amount of bcast pkts fwded across WAN.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;rw
Enumeration
.micom-oscar.6.7.4
nvmBrgAgeTimeNAME = ; DESC = Aging time for dynamically learned devices \ in forwarding Table.; HELP = The timeout period in seconds for aging \ out dynamically learned forwarding \ information. 802.1D-1990 recommends \ a default of 300 seconds. Mirror object \ of dot1dTpAgingTime.; CAPABILITIES = NET_CFG, VPN_CFG;rw
INTEGER
.micom-oscar.6.7.5
nvmBrgMiscParamGroup
OBJECT IDENTIFIER
.micom-oscar.6.8
nvmBrgDebugEnableNAME = ; DESC = The access device's capability to generate controlled \ number of debugging messages to CLI for \ the purpose of debugging some bridge \ status.; HELP = Bridge Debugging Enabled?; CAPABILITIES = NET_CFG, VPN_DISP;rw
Enumeration
.micom-oscar.6.8.1
nvmBrgSpanDebugEnableNAME = ; DESC = The access device's capability to debug spanning \ tree algorithm.; HELP = Spanning-Tree Debugging Enabled?; CAPABILITIES = NET_CFG, VPN_DISP;rw
Enumeration
.micom-oscar.6.8.2
nvmBrgSpoofCacheAgeNAME = ; DESC = The aging time for entries in the ARP Spoof\ cache table to specified by the cache timeout \ to make room for active entries.; HELP = The Aging Time for the ARP Spoof Cache.; CAPABILITIES = NET_CFG, VPN_CFG;rw
INTEGER
.micom-oscar.6.8.3
nvmBrgSpoofThresholdAgeNAME = ; DESC = The Aging Time for the ARP Spoofcache Threshold \ in seconds.(60 .. 1800 sec); HELP = The Aging Time for the ARP Spoof Threshold.; CAPABILITIES = NET_CFG, VPN_CFG;rw
INTEGER
.micom-oscar.6.8.4
nvmBrgSpoofThresholdCountNAME = ; DESC = The ARP Spoof Threshold count- allows \ the max number of consecutive outstanding \ ARP request per dest node.; HELP = The ARP Spoof Threshold count.; CAPABILITIES = NET_CFG, VPN_CFG;rw
INTEGER
.micom-oscar.6.8.5
nvmBrgStpParamGroup
OBJECT IDENTIFIER
.micom-oscar.6.9
nvmBrgPriorityNAME = ; DESC = The value of the write-able portion \ of the Bridge ID, i.e., the first two \ octets of the (8 octet long) Bridge ID.; HELP = The other (last) 6 octets of the \ Bridge ID are given by the value of \ dot1dBaseBridgeAddress. This is Mirror \ object to dot1dStpPriority.; CAPABILITIES = NET_CFG, VPN_CFG;rw
INTEGER
.micom-oscar.6.9.1
nvmBrgMaxAgeNAME = ; DESC = The maximum age of Spanning Tree Protocol \ information learned from the network \ on any port before it is discarded, \ in units of hundredths of a second.; HELP = This is the programmed value of the \ dot1dStpBridgeMaxAge.; CAPABILITIES = NET_CFG, VPN_CFG;rw
Timeout
.micom-oscar.6.9.2
nvmBrgFwdDelayNAME = ; DESC = The value that all bridges use for \ ForwardDelay when this bridge is \ acting as the root.; HELP = Note that 802.1D-1990 specifies that \ the range for this parameter is related \ to the value of dot1dStpBridgeMaxAge. \ The granularity of this timer is specified \ by 802.1D-1990 to be 1 second. An agent \ may return a badValue error if a set \ is attempted to a value which is not \ a whole number of seconds. Mirror object \ of dot1dStpBridgeForwardDelay; CAPABILITIES = NET_CFG, VPN_CFG;rw
Timeout
.micom-oscar.6.9.3
nvmBrgHelloTimeNAME = ; DESC = The value that all bridges use for HelloTime \ when this bridge is acting as the root.; HELP = The granularity of this timer is specified \ by 802.1D- 1990 to be 1 second. An \ agent may return a badValue error if \ a set is attempted to a value which \ is not a whole number of seconds. Mirror \ object of dot1dStpBridgeHelloTime.; CAPABILITIES = NET_CFG, VPN_CFG;rw
Timeout
.micom-oscar.6.9.4
nvmBrgConfPortTableNAME = ; DESC = A config table that contains port-specific \ information for tha access device Bridge Configuration \ information.; HELP = A table that contains port-specific \ information for the access device Biidge Config \ information.; CAPABILITIES = NET_CFG, VPN_CFG;
SEQUENCE OF NvmBrgConfPortEntry
.micom-oscar.6.10
nvmBrgConfPortEntryNAME = ; DESC = A list of information maintained by \ each Port that are being used by the access device, \ about conf. parameters for that port.; HELP = ; CAPABILITIES = ;
NvmBrgConfPortEntry
.micom-oscar.6.10.1
nvmBrgConfPortIndexNAME = ; DESC = The Port Index to which this entry pertains.; HELP = ; CAPABILITIES = ;rw
INTEGER
.micom-oscar.6.10.1.1
nvmBrgConfPortTypeNAME = ; DESC = The Type of the interface this port \ is attached to. \ This object only supported enumerations of \ ethernet and frameRelay.; HELP = ; CAPABILITIES = ;rw
Enumeration
.micom-oscar.6.10.1.2
nvmBrgConfPortEnableNAME = ; DESC = The status of the Port is enabled/disabled.; HELP = Mirror object of dot1dStpPortEnable.; CAPABILITIES = ;rw
Enumeration
.micom-oscar.6.10.1.3
nvmBrgConfPortPriorityNAME = ; DESC = The value of the priority field which \ is contained in the first (in network \ byte order) octet of the port ID.; HELP = It's the mirror object of dot1dStpPortPriority.; CAPABILITIES = ;rw
INTEGER
.micom-oscar.6.10.1.4
nvmBrgConfPortPathCostNAME = ; DESC = The contribution of this port to the \ path cost of paths towards the spanning \ tree root which include this port.; HELP = 802.1D-1990 recommends that the default \ value of this parameter be in inverse \ proportion to the speed of the attached \ LAN. Mirror object of dot1dStpPortPathCost.; CAPABILITIES = ;rw
INTEGER
.micom-oscar.6.10.1.5
nvmBrgConfPortMacFilterFlagNAME = ; DESC = When MAC address filtering is needed on a \ specific port, enable MAC filter Flag. Otherwise, \ disable the MAC Filetr Flag.; HELP = Is MAC Filtering enabled?; CAPABILITIES = ;rw
Enumeration
.micom-oscar.6.10.1.6
nvmBrgConfPortEtFilterFlagNAME = ; DESC = When E-type filtering is needed on a specific \ port, enable E-type filter Flag. Otherwise,When \ disable E-type Filter Flag.; HELP = Is E-type Filtering enabled?; CAPABILITIES = ;rw
Enumeration
.micom-oscar.6.10.1.7
nvmBrgConfPortSapFilterFlagNAME = ; DESC = When SAP filtering is needed on a specific \ port, enable SAP filter flag. Otherwise, \ disable the SAP filter flag.; HELP = Is SAP Filtering enabled?; CAPABILITIES = ;rw
Enumeration
.micom-oscar.6.10.1.8
nvmBrgConfPortMacInclExclNAME = ; DESC = ; HELP = Inclusive or Exclusive Mac Filtering?; CAPABILITIES = ;rw
Enumeration
.micom-oscar.6.10.1.9
nvmBrgConfPortEtInclExclNAME = ; DESC = ; HELP = Inclusive or Exclusive Et Filtering?; CAPABILITIES = ;rw
Enumeration
.micom-oscar.6.10.1.10
nvmBrgConfPortSapInclExclNAME = ; DESC = ; HELP = Inclusive or Exclusive Sap Filtering?; CAPABILITIES = ;rw
Enumeration
.micom-oscar.6.10.1.11
nvmBrgMacFilterTableNAME = ; DESC = ; HELP = A table that contains port-specific \ information for the access device MAC Filter \ information.; CAPABILITIES = NET_CFG, VPN_CFG;
SEQUENCE OF NvmBrgMacFilterEntry
.micom-oscar.6.11
nvmBrgMacFilterEntryNAME = ; DESC = ; HELP = A list of information maintained by \ every port about the access device MAC Filter \ parameters for that port.; CAPABILITIES = ;
NvmBrgMacFilterEntry
.micom-oscar.6.11.1
nvmBrgMacFilterPortIndexNAME = ; DESC = ; HELP = The Port Index to which this entry pertains.; CAPABILITIES = ;ro
INTEGER
.micom-oscar.6.11.1.1
nvmBrgMacFilterNumberNAME = ; DESC = ; HELP = The Port Index to which this entry pertains.; CAPABILITIES = ;ro
INTEGER
.micom-oscar.6.11.1.2
nvmBrgMacAddressNAME = ; DESC = ; HELP = The MAC Address which needs to be filtered.; CAPABILITIES = ;ro
MacAddress (SNMPv2-TC)
.micom-oscar.6.11.1.3
nvmBrgMacTypeNAME = ; DESC = ; HELP = The type of the MAC Address. By setting \ it to invalid one can invalidate the \ entry.; CAPABILITIES = ;ro
Enumeration
.micom-oscar.6.11.1.4
nvmBrgEtFilterTableNAME = ; DESC = DESC = A table that contains port-specific \ information for the access device E-type Filter.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
SEQUENCE OF NvmBrgEtFilterEntry
.micom-oscar.6.12
nvmBrgEtFilterEntryNAME = ; DESC = A list of information maintained by \ each port about the access device E-type Filter \ parameters for that port.; Help = ; CAPABILITIES = ;
NvmBrgEtFilterEntry
.micom-oscar.6.12.1
nvmBrgEtFilterPortIndexNAME = ; DESC = The port Index particular to this port.; HELP = ; CAPABILITIES = ;ro
INTEGER
.micom-oscar.6.12.1.1
nvmBrgEtFilterNumberNAME = ; DESC = The Filter number associated with the \ port Index.; HELP = ; CAPABILITIES = ;ro
INTEGER
.micom-oscar.6.12.1.2
nvmBrgEtFilterStatusNAME = ; DESC = An indication as to whether the filter \ is specified as a single e-type or \ as a range of e-types.; HELP = Setting the value to invalid has the \ the effect of deleting the entry.; CAPABILITIES = ;ro
Enumeration
.micom-oscar.6.12.1.3
nvmBrgEtFilterETypeNAME = ; DESC = The singular e-type to be filters.; HELP = The value of this object is valid only \ if the mcmBrgEtFilterStatus (above) \ is singular.; CAPABILITIES = ;ro
INTEGER
.micom-oscar.6.12.1.4
nvmBrgEtFilterUpperRangeNAME = ; DESC = The Upper Range of the E-type to be \ filtered. Range is between 0 - 65535.; HELP = This object is valid only if the \ mcmBrgEtFilterStatus (above) is range.; CAPABILITIES = ;ro
INTEGER
.micom-oscar.6.12.1.5
nvmBrgEtFilterLowerRangeNAME = ; DESC = The lower Range of the E-type to be \ filtered. Range is between 0 - 65535.; HELP = This object is valid only \ if the mcmBrgEtFilterStatus (above) \ is range.; CAPABILITIES = ;ro
INTEGER
.micom-oscar.6.12.1.6
nvmBrgSapFilterTableNAME = ; DESC = A table that contains port-specific \ information for the access device E-type \ Filter information.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
SEQUENCE OF NvmBrgSapFilterEntry
.micom-oscar.6.13
nvmBrgSapFilterEntryNAME = ; DESC = A list of information maintained by \ every port about the access device E-type Filter \ parameters for that port.; HELP = ; CAPABILITIES = ;
NvmBrgSapFilterEntry
.micom-oscar.6.13.1
nvmBrgSapFilterPortIndexNAME = ; DESC = The Port Index to which this entry pertains.; HELP = ; CAPABILITIES = ;rw
INTEGER
.micom-oscar.6.13.1.1
nvmBrgSapFilterNumberNAME = ; DESC = The Filter number associated with the \ port Index.; HELP = ; CAPABILITIES = ;rw
INTEGER
.micom-oscar.6.13.1.2
nvmBrgSapFilterStatusNAME = ; DESC = An indication as to whether the filter \ is specified as a single e-type or \ as a range of e-types.; HELP = Setting the value to invalid has the \ effect of deleteing the entry.; CAPABILITIES = ;rw
Enumeration
.micom-oscar.6.13.1.3
nvmBrgSapFilterETypeNAME = ; DESC = The singular e-type to be filtered. \ HELP = The value of this object is valid only \ if the mcmBrgSapFilterStatus (above) \ is singular.; CAPABILITIES = ;rw
INTEGER
.micom-oscar.6.13.1.4
nvmBrgSapFilterUpperRangeNAME = ; DESC = The Upper Range of the E-type to be \ filtered.; HELP = This object is valid only if the \ mcmBrgSapFilterStatus (above) \ is range.; CAPABILITIES = ;rw
INTEGER
.micom-oscar.6.13.1.5
nvmBrgSapFilterLowerRangeNAME = ; DESC = The lower Range of the E-type to be \ filtered.; HELP = This object is valid only if the \ mcmBrgSapFilterStatus (above) \ is range.; CAPABILITIES = ;rw
INTEGER
.micom-oscar.6.13.1.6
mcmBrgCntr
OBJECT IDENTIFIER
.micom-oscar.6.14
mcmBrgPortCntrZeroTableNAME = ; DESC = This object was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to release 3.0. \ A table that contains port-specific \ information for access device Port Counter \ Zeroing.; HELP =; CAPABILITIES = NET_CFG, VPN_CFG;obsolete
SEQUENCE OF McmBrgPortCntrZeroEntry
.micom-oscar.6.14.1
mcmBrgPortCntrZeroEntryNAME = ; DESC = This object was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to release 3.0. \ A list of information maintained by \ every port about the access device E-type Filter \ parameters for that port.; HELP = ; CAPABILITIES = ;obsolete
McmBrgPortCntrZeroEntry
.micom-oscar.6.14.1.1
mcmBrgPortCntrZeroIndexNAME = ; DESC = This object was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to release 3.0. \ The Port Index to which this entry pertains.; HELP = ; CAPABILITIES = ;rwobsolete
INTEGER
.micom-oscar.6.14.1.1.1
mcmBrgBasePortCounterZeroNAME = ; DESC = This object was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to release 3.0. \ When set to reset, the Base port Counters \ should be zeroed out.; HELP = ; CAPABILITIES = ;rwobsolete
Enumeration
.micom-oscar.6.14.1.1.2
mcmBrgStpPortCounterZeroNAME = ; DESC = This object was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to release 3.0. \ When set to reset, the spanning Tree port \ counters will be zeroed out.; HELP = ; CAPABILITIES = ;rwobsolete
Enumeration
.micom-oscar.6.14.1.1.3
mcmBrgTpPortCounterZeroNAME = ; DESC = This object was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to release 3.0. \ When set to reset, the Transparent port \ counters will be zeroed out.; HELP = ; CAPABILITIES = ;rwobsolete
Enumeration
.micom-oscar.6.14.1.1.4
mcmBrgCounterZero
OBJECT IDENTIFIER
.micom-oscar.6.14.2
mcmBrgStpCounterZeroNAME = ; DESC = This object was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to release 3.0. \ When set to reset, the spanning Tree port \ counters will be zeroed out.; HELP = ; CAPABILITIES = ;rwobsolete
Enumeration
.micom-oscar.6.14.2.1
mcmBrgTpCounterZeroNAME = ; DESC = This object was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to release 3.0. \ When set to reset, the Transparent port \ counters will be zeroed out.; HELP = ; CAPABILITIES = ;rwobsolete
Enumeration
.micom-oscar.6.14.2.2
MICOMBRGEXT - SNMP MIB Reference | MIBs Explorer