MGUARDB-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for MGUARDB-MIB.
812
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
812 total| Object Name |
|---|
innominate OBJECT IDENTIFIER .1.3.6.1.4.1.15450 |
RFC1155-SMI Unknown .1.3.6.1.4.1.15450 |
mGuardb OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2 |
mGuardHTTPSLoginTrapThis trap is sent when someone is trying to open a HTTPS session
using the wrong password. mGuardHTTPSLastAccessIP contains the IP
address of the last unsuccessfull login request. TRAP-TYPE .1.3.6.1.4.1.15450.2.0.1 |
mGuardShellLoginTrapThis trap is sent when someone opens the shell through SSH or
serial console. mGuardShellAccessLastIP contains the IP address of
the login request. The value of mGuardShellAccessLastIP is 0.0.0.0,
if the request was sent via serial console. TRAP-TYPE .1.3.6.1.4.1.15450.2.0.2 |
mGuardDHCPNewClientTrapThis trap is sent when a DHCP request was received from an unknown
client TRAP-TYPE .1.3.6.1.4.1.15450.2.0.3 |
mGuardVPN OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.1 |
mGuardVPNMachine OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.1.1 |
mGuardVPNMachineCertMachine certificate and private key of this device.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.1.1 |
mGuardVPNMachinePrivatePrivate keyrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.1.2 |
mGuardVPNConnectionTableA table containing the configuration of
the local device's VPN connections. SEQUENCE OF MGuardVPNConnectionEntry .1.3.6.1.4.1.15450.2.1.2 |
mGuardVPNConnectionEntryConfiguration of a single VPN connection. MGuardVPNConnectionEntry .1.3.6.1.4.1.15450.2.1.2.1 |
mGuardVPNconIndexIndex to identify the connection. INTEGER .1.3.6.1.4.1.15450.2.1.2.1.1 |
mGuardVPNconNameDescriptive name of the connection.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.2.1.2 |
mGuardVPNconEnabledIs the connection enabled: yes / no .rw Enumeration .1.3.6.1.4.1.15450.2.1.2.1.3 |
mGuardVPNremGWRemote VPN gateway.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.2.1.4 |
mGuardVPNconTypeType of VPN connection: transport / tunnel / l2tp-w2k / l2tp-sshrw Enumeration .1.3.6.1.4.1.15450.2.1.2.1.5 |
mGuardVPNlocalNetLocal net address for VPN connection in tunnel mode.rwdeprecated IpAddress .1.3.6.1.4.1.15450.2.1.2.1.6 |
mGuardVPNlocalMaskLocal netmask for VPN connection in tunnel mode.rwdeprecated IpAddress .1.3.6.1.4.1.15450.2.1.2.1.7 |
mGuardVPNremoteNetRemote net address for VPN connection in tunnel mode.rwdeprecated IpAddress .1.3.6.1.4.1.15450.2.1.2.1.8 |
mGuardVPNremoteMaskRemote netmask for VPN connection in tunnel mode.rwdeprecated IpAddress .1.3.6.1.4.1.15450.2.1.2.1.9 |
mGuardVPNauthTypeAuthentification mode of the VPN connection: psk / x509rw Enumeration .1.3.6.1.4.1.15450.2.1.2.1.10 |
mGuardVPNpskPre Shared Secretrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.2.1.11 |
mGuardVPNx509X.509 certificaterw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.2.1.12 |
mGuardVPNikeDHIKE DH algorithm.rw Enumeration .1.3.6.1.4.1.15450.2.1.2.1.13 |
mGuardVPNikeHashIKE hash algorithm: all / md5 / sha1rw Enumeration .1.3.6.1.4.1.15450.2.1.2.1.14 |
mGuardVPNipsecHashipsec hash algorithm: all / md5 / sha1rw Enumeration .1.3.6.1.4.1.15450.2.1.2.1.15 |
mGuardVPNikeAlgIKE encryption algorithm: des / 3des168 / aes128 / aes192 / aes256rw Enumeration .1.3.6.1.4.1.15450.2.1.2.1.16 |
mGuardVPNipsecAlgipsec encryption algorithm: des/ 3des168 / aes128 / aes192 / aes256 / nullrw Enumeration .1.3.6.1.4.1.15450.2.1.2.1.17 |
mGuardVPNpfsipsec perfect forward secrecy: no / all / modp1024 / modp1536 / modp2048 / modp3072 / modp4096rw Enumeration .1.3.6.1.4.1.15450.2.1.2.1.18 |
mGuardVPNconStartUpRecognize the startup of the VPN connection or wait
for connection startup of the remote gateway: yes / no .rw Enumeration .1.3.6.1.4.1.15450.2.1.2.1.19 |
mGuardVPNvirtIPMethodThis option isn't implemented yet.rw Enumeration .1.3.6.1.4.1.15450.2.1.2.1.20 |
mGuardVPNvirtIPVirtual IP to userw IpAddress .1.3.6.1.4.1.15450.2.1.2.1.21 |
mGuardVPNFWLogDefInLog entries for undefined incoming connection attemps ?rw Enumeration .1.3.6.1.4.1.15450.2.1.2.1.22 |
mGuardVPNFWLogDefOutLog entries for undefined outgoing connection attemps ?rw Enumeration .1.3.6.1.4.1.15450.2.1.2.1.23 |
mGuardVPNProtoAHUse the AH protocoll. Only 'no' is supported.rw Enumeration .1.3.6.1.4.1.15450.2.1.2.1.26 |
mGuardVPNProtoESPUse the ESP protocoll. Only 'yes' is supported.rw Enumeration .1.3.6.1.4.1.15450.2.1.2.1.27 |
mGuardVPNCompUse IPsec compression. Only 'no' is supported.rw Enumeration .1.3.6.1.4.1.15450.2.1.2.1.28 |
mGuardVPNLocalIDModeMode for local ID. This option isn't implemented yet.rw Enumeration .1.3.6.1.4.1.15450.2.1.2.1.29 |
mGuardVPNLocalIDLocal ID.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.2.1.30 |
mGuardVPNRemoteIDModeMode for remote ID. This option isn't implemented yet.rw Enumeration .1.3.6.1.4.1.15450.2.1.2.1.31 |
mGuardVPNRemoteIDLocal ID.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.2.1.32 |
mGuardVPNIkeLifetimeISAKMP SA lifetime (seconds).rw INTEGER .1.3.6.1.4.1.15450.2.1.2.1.33 |
mGuardVPNIpsecLifetimeIPSec SA lifetime (seconds).rw INTEGER .1.3.6.1.4.1.15450.2.1.2.1.34 |
mGuardVPNRekeyMarginRekey Margin (seconds).rw INTEGER .1.3.6.1.4.1.15450.2.1.2.1.35 |
mGuardVPNRekeyFuzzRekey fuzz (in percent).rw INTEGER .1.3.6.1.4.1.15450.2.1.2.1.36 |
mGuardVPNKeyingTriesRekey fuzz (in percent).rw INTEGER .1.3.6.1.4.1.15450.2.1.2.1.37 |
mGuardVPNRekeyRenegotiate connection after the keys have expired? Must be set to
'no' on both end to be effective.rw Enumeration .1.3.6.1.4.1.15450.2.1.2.1.38 |
mGuardVPNDPDActionWhat to do in case DPD found out that the connection is dead:
'hold': renegotiate connection.
'clear': clear connection and don't renegotiate.rw Enumeration .1.3.6.1.4.1.15450.2.1.2.1.39 |
mGuardVPNDPDDelayInterval in seconds to wait before sending DPD requests when
the remote end didn't send data. The default value is 30.rw INTEGER .1.3.6.1.4.1.15450.2.1.2.1.40 |
mGuardVPNDPDTimeoutInterval in seconds before declaring the remote end as dead after
sending the first DPD request. The default value is 120.rw INTEGER .1.3.6.1.4.1.15450.2.1.2.1.41 |
mGuardVPNRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.2.1.42 |
mGuardVPNAggressiveWether to use/accept aggressive mode VPn connections for this one.rw Enumeration .1.3.6.1.4.1.15450.2.1.2.1.43 |
mGuardVPNlocalLocal network for VPN connection in tunnel mode in CIDR notation.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.2.1.44 |
mGuardVPNremoteRemote network for VPN connection in tunnel mode in CIDR notation.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.2.1.45 |
mGuardVPNFW OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.1.3 |
mGuardVPNFWINTableTable of firewall rules for incoming packets. SEQUENCE OF MGuardVPNFWINEntry .1.3.6.1.4.1.15450.2.1.3.1 |
mGuardVPNFWINEntryAn entry containing data of a single rule. MGuardVPNFWINEntry .1.3.6.1.4.1.15450.2.1.3.1.1 |
mGuardVPNFWINconIndexIndex to identify the rule. INTEGER .1.3.6.1.4.1.15450.2.1.3.1.1.1 |
mGuardVPNFWINruleIndexIndex to identify the rule. INTEGER .1.3.6.1.4.1.15450.2.1.3.1.1.2 |
mGuardVPNFWINsourceIPThe rule's source IP addressrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.3.1.1.3 |
mGuardVPNFWINdestinationIPThe rule's source IP addressrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.3.1.1.4 |
mGuardVPNFWINsportThe rule's source portrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.3.1.1.5 |
mGuardVPNFWINdportThe rule's destination portrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.3.1.1.6 |
mGuardVPNFWINtargetThe rule's targetrw Enumeration .1.3.6.1.4.1.15450.2.1.3.1.1.7 |
mGuardVPNFWINprotoThe rule's transport protocolrw Enumeration .1.3.6.1.4.1.15450.2.1.3.1.1.8 |
mGuardVPNFWINlogLog packets matching this rule.rw Enumeration .1.3.6.1.4.1.15450.2.1.3.1.1.9 |
mGuardVPNFWINRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.3.1.1.10 |
mGuardVPNFWINcommentCommentary or name for this rule.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.3.1.1.11 |
mGuardVPNFWOUTTableTable of firewall rules for outgoing packets. SEQUENCE OF MGuardVPNFWOUTEntry .1.3.6.1.4.1.15450.2.1.3.2 |
mGuardVPNFWOUTEntryAn entry containing data of a single rule. MGuardVPNFWOUTEntry .1.3.6.1.4.1.15450.2.1.3.2.1 |
mGuardVPNFWOUTconIndexIndex to identify the rule. INTEGER .1.3.6.1.4.1.15450.2.1.3.2.1.1 |
mGuardVPNFWOUTruleIndexIndex to identify the rule. INTEGER .1.3.6.1.4.1.15450.2.1.3.2.1.2 |
mGuardVPNFWOUTsourceIPThe rule's source IP addressrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.3.2.1.3 |
mGuardVPNFWOUTdestinationIPThe rule's source IP addressrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.3.2.1.4 |
mGuardVPNFWOUTsportThe rule's source portrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.3.2.1.5 |
mGuardVPNFWOUTdportThe rule's destination portrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.3.2.1.6 |
mGuardVPNFWOUTtargetThe rule's targetrw Enumeration .1.3.6.1.4.1.15450.2.1.3.2.1.7 |
mGuardVPNFWOUTprotoThe rule's transport protocolrw Enumeration .1.3.6.1.4.1.15450.2.1.3.2.1.8 |
mGuardVPNFWOUTlogLog packets matching this rule.rw Enumeration .1.3.6.1.4.1.15450.2.1.3.2.1.9 |
mGuardVPNFWOUTRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.3.2.1.10 |
mGuardVPNFWOUTcommentCommentary or name for this rule.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.3.2.1.11 |
mGuardVPNDynDNS OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.1.4 |
mGuardVPNDynDNSRegister OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.1.4.1 |
mGuardVPNDynDNSRegRegister at a DynDNS service:
no, yesrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.4.1.1 |
mGuardVPNDynDNSRegIntervalRefresh interval for registration.rw INTEGER .1.3.6.1.4.1.15450.2.1.4.1.2 |
mGuardVPNDynDNSRegServerDynDNS server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.4.1.3 |
mGuardVPNDynDNSRegLoginLogin for DynDNS server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.4.1.4 |
mGuardVPNDynDNSRegPasswdPassword for DynDNS server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.4.1.5 |
mGuardVPNDynDNSRegProviderDynDNS providerrw Enumeration .1.3.6.1.4.1.15450.2.1.4.1.6 |
mGuardVPNDynDNSRegHostnameHostname to registerrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.4.1.7 |
mGuardVPNDynDNSCheck OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.1.4.2 |
mGuardVPNDynDNSCheckDoShould hostnames of remote vpn gateways be checked after certain
time intervals in case they are at a DynDNS provider? : no,yesrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.4.2.1 |
mGuardVPNDynDNSCheckRefreshRefresh interval for checking DNS names of remote VPN peers.rw INTEGER .1.3.6.1.4.1.15450.2.1.4.2.2 |
mGuardVPNL2TP OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.1.5 |
mGuardVPNL2TPStartStart the L2TP Server ? yes,norw Enumeration .1.3.6.1.4.1.15450.2.1.5.1 |
mGuardVPNL2TPLocalIPLocal IP for L2TP connectionsrw IpAddress .1.3.6.1.4.1.15450.2.1.5.2 |
mGuardVPNL2TPRemoteIPRangeStartStart of range of remote IPs.rw IpAddress .1.3.6.1.4.1.15450.2.1.5.3 |
mGuardVPNL2TPRemoteIPRangeEndEnd of range of remote IPs.rw IpAddress .1.3.6.1.4.1.15450.2.1.5.4 |
mGuardVPNL2TPpppdOptTableA table of options set for the pppd process implementing IPsec/L2TP. SEQUENCE OF MGuardVPNL2TPpppdOptEntry .1.3.6.1.4.1.15450.2.1.5.5 |
mGuardVPNL2TPpppdOptEntryA single option set for pppd. MGuardVPNL2TPpppdOptEntry .1.3.6.1.4.1.15450.2.1.5.5.1 |
mGuardVPNL2TPpppdOptIndexTable index. INTEGER .1.3.6.1.4.1.15450.2.1.5.5.1.1 |
mGuardVPNL2TPpppdOptValueThe pppd option.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.5.5.1.2 |
mGuardVPNL2TPpppdOptRowStatusRow Statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.1.5.5.1.3 |
mGuardVPNSettings OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.1.6 |
mGuardVPNRequireUniqueIDsAllow only one open connection per identity (ie. X.509 certificate).rw Enumeration .1.3.6.1.4.1.15450.2.1.6.1 |
mGuardVPNNatTraversalEncapsulate ESP traffic into IKE (UDP) packets to pass IPsec unaware NAT routers.rw Enumeration .1.3.6.1.4.1.15450.2.1.6.2 |
mGuardVPNNatTPortfloatingSome NAT routers fail to perform NAT originating low UDP ports. This option moves IKE from UDP 500 to UDP 4500 if possiblerw Enumeration .1.3.6.1.4.1.15450.2.1.6.3 |
mGuardVPNNatTKeepAliveIntervalNAT-T Keepalive Interval (in seconds).
Keepalives will tell the NAT router not to close the connection.rw INTEGER .1.3.6.1.4.1.15450.2.1.6.4 |
mGuardVPNNatTKeepAliveForceForce NAT-T Keepalive ?rw Enumeration .1.3.6.1.4.1.15450.2.1.6.5 |
mGuardVPNIkeLogLog verbose information on IKE ?rw Enumeration .1.3.6.1.4.1.15450.2.1.6.6 |
mGuardVPNHideTosWhen set to yes the TOS bit will be cleared on IPsec output.rw Enumeration .1.3.6.1.4.1.15450.2.1.6.7 |
mGuardVPNmtuipsec0 mturw INTEGER .1.3.6.1.4.1.15450.2.1.6.8 |
mGuardVPNStrictCRLPolicyUse a strict CRL policy?rw Enumeration .1.3.6.1.4.1.15450.2.1.6.9 |
mGuardVPNNoCertReqSendDon't send certificate requests?rw Enumeration .1.3.6.1.4.1.15450.2.1.6.10 |
mGuardFirewall OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.2 |
mGuardFirewallIncoming OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.2.1 |
mGuardFirewallIncomingTableA table containing firewall rules for incoming packets. SEQUENCE OF MGuardFirewallIncomingEntry .1.3.6.1.4.1.15450.2.2.1.1 |
mGuardFirewallIncomingEntryAn entry containing data of a single rule. MGuardFirewallIncomingEntry .1.3.6.1.4.1.15450.2.2.1.1.1 |
mGuardFWINruleIndexIndex to identify the rule. INTEGER .1.3.6.1.4.1.15450.2.2.1.1.1.1 |
mGuardFWINsourceIPThe rule's source IP addressrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.1.1.1.2 |
mGuardFWINdestinationIPThe rule's source IP addressrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.1.1.1.3 |
mGuardFWINsportThe rule's source portrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.1.1.1.4 |
mGuardFWINdportThe rule's destination portrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.1.1.1.5 |
mGuardFWINtargetThe rule's targetrw Enumeration .1.3.6.1.4.1.15450.2.2.1.1.1.6 |
mGuardFWINprotoThe rule's transport protocolrw Enumeration .1.3.6.1.4.1.15450.2.2.1.1.1.7 |
mGuardFWINlogLog packets matching this rule ?rw Enumeration .1.3.6.1.4.1.15450.2.2.1.1.1.8 |
mGuardFWINRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.1.1.1.9 |
mGuardFWINcommentCommentary or name for this rule.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.1.1.1.10 |
mGuardFirewallINLogDefaultLog entries for unknown connection attemps ?rw Enumeration .1.3.6.1.4.1.15450.2.2.1.2 |
mGuardFirewallOutgoing OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.2.2 |
mGuardFirewallOutgoingTableA table containing firewall rules for outgoing packets. SEQUENCE OF MGuardFirewallOutgoingEntry .1.3.6.1.4.1.15450.2.2.2.1 |
mGuardFirewallOutgoingEntryAn entry containing data of a single rule. MGuardFirewallOutgoingEntry .1.3.6.1.4.1.15450.2.2.2.1.1 |
mGuardFWOUTruleIndexIndex to identify the rule. INTEGER .1.3.6.1.4.1.15450.2.2.2.1.1.1 |
mGuardFWOUTsourceIPThe rule's source IP addressrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.2.1.1.2 |
mGuardFWOUTdestinationIPThe rule's source IP addressrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.2.1.1.3 |
mGuardFWOUTsportThe rule's source portrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.2.1.1.4 |
mGuardFWOUTdportThe rule's destination portrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.2.1.1.5 |
mGuardFWOUTtargetThe rule's targetrw Enumeration .1.3.6.1.4.1.15450.2.2.2.1.1.6 |
mGuardFWOUTprotoThe rule's transport protocolrw Enumeration .1.3.6.1.4.1.15450.2.2.2.1.1.7 |
mGuardFWOUTlogLog packets matching this rule ?rw Enumeration .1.3.6.1.4.1.15450.2.2.2.1.1.8 |
mGuardFWOUTRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.2.1.1.9 |
mGuardFWOUTcommentCommentary or name for this rule.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.2.1.1.10 |
mGuardFirewallOUTLogDefaultLog entries for unknown connection attemps ?rw Enumeration .1.3.6.1.4.1.15450.2.2.2.2 |
mGuardFirewallPortforwarding OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.2.3 |
mGuardFirewallPortforwardTableA table containing firewall rules for portforwarding. SEQUENCE OF MGuardFirewallPortforwardEntry .1.3.6.1.4.1.15450.2.2.3.1 |
mGuardFirewallPortforwardEntryAn entry containing data of a single rule. MGuardFirewallPortforwardEntry .1.3.6.1.4.1.15450.2.2.3.1.1 |
mGuardFWPORTFORWruleIndexIndex to identify the rule. INTEGER .1.3.6.1.4.1.15450.2.2.3.1.1.1 |
mGuardFWPORTFORWinIPThe rule's incoming IP addressrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.3.1.1.2 |
mGuardFWPORTFORWoutIPThe rule's redirect IP addressrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.3.1.1.3 |
mGuardFWPORTFORWinportThe rule's incoming portrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.3.1.1.4 |
mGuardFWPORTFORWoutportThe rule's destination portrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.3.1.1.5 |
mGuardFWPORTFORWprotoThe rule's transport protocolrw Enumeration .1.3.6.1.4.1.15450.2.2.3.1.1.6 |
mGuardFWPORTFORWlogLog packets matching this rule ?rw Enumeration .1.3.6.1.4.1.15450.2.2.3.1.1.7 |
mGuardFWPORTFORWRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.3.1.1.8 |
mGuardFWPORTFORWsrcIPThe rule's source IP addressrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.3.1.1.9 |
mGuardFWPORTFORWsrcportThe rule's source portrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.3.1.1.10 |
mGuardFWPORTFORWcommentCommentary or name for this rule.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.3.1.1.11 |
mGuardFirewallNAT OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.2.4 |
mGuardFirewallNATRuleTableA table containing firewall rules for network address translation. SEQUENCE OF MGuardFirewallNATRuleEntry .1.3.6.1.4.1.15450.2.2.4.1 |
mGuardFirewallNATRuleEntryAn entry containing data of a single rule. MGuardFirewallNATRuleEntry .1.3.6.1.4.1.15450.2.2.4.1.1 |
mGuardFWNATruleIndexIndex to identify the rule. INTEGER .1.3.6.1.4.1.15450.2.2.4.1.1.1 |
mGuardFWNATIPThe rule's source IP addressrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.4.1.1.2 |
mGuardFWNATRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.4.1.1.3 |
mGuardFWNATOutIPReserved for future userw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.4.1.1.4 |
mGuardFirewallExtended OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.2.5 |
mGuardFirewallIPConntrackMaxMaximum size of connection tracking tablerw INTEGER .1.3.6.1.4.1.15450.2.2.5.1 |
mGuardFirewallIPSynfloodLimitIntMaximum number of new outgoing TCP connections (SYN) per secondrw INTEGER .1.3.6.1.4.1.15450.2.2.5.2 |
mGuardFirewallIPSynfloodLimitExtMaximum number of new incoming TCP connections (SYN) per secondrw INTEGER .1.3.6.1.4.1.15450.2.2.5.3 |
mGuardFirewallICMPLimitIntMaximum number of outgoing ping frames (ICMP Echo Request) per secondrw INTEGER .1.3.6.1.4.1.15450.2.2.5.4 |
mGuardFirewallICMPLimitExtMaximum number of incoming ping frames (ICMP Echo Request) per secondrw INTEGER .1.3.6.1.4.1.15450.2.2.5.5 |
mGuardFirewallEnableConntrackFTPEnable active FTP NAT/Connection Tracking supportrw Enumeration .1.3.6.1.4.1.15450.2.2.5.6 |
mGuardFirewallConntrackIRCEnable IRC NAT/Connection Tracking supportrw Enumeration .1.3.6.1.4.1.15450.2.2.5.7 |
mGuardFirewallConntrackPPTPEnable PPTP NAT/Connection Tracking supportrw Enumeration .1.3.6.1.4.1.15450.2.2.5.8 |
mGuardFirewallARPLimitIntMaximum number of outgoing arp request frames per second (stealth mode only)rw INTEGER .1.3.6.1.4.1.15450.2.2.5.9 |
mGuardFirewallARPLimitExtMaximum number of incoming arp request frames per second (stealth mode only)rw INTEGER .1.3.6.1.4.1.15450.2.2.5.10 |
mGuardFirewallICMPPolicyAllow incoming ICMP frames to the mGuard itself (router modes only):
drop: default, ping: allow incoming ICMP echo request (required to
answer ping), all: allow all incoming ICMP request to reach the TCP
stack.
Note: ICMP packets related to established connections are handled
by the connection tracking. This setting is used for unrelated ICMP
traffic.rw Enumeration .1.3.6.1.4.1.15450.2.2.5.11 |
mGuardFirewallConntrackH323Enable H323 NAT/Connection Tracking supportrw Enumeration .1.3.6.1.4.1.15450.2.2.5.12 |
mGuardFirewallIpUncleanMatchEnable IP Unclean Matchrw Enumeration .1.3.6.1.4.1.15450.2.2.5.13 |
mGuardFirewall11NAT OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.2.6 |
mGuardFirewall11NATRuleTableA table containing firewall rules for network address translation. SEQUENCE OF MGuardFirewall11NATRuleEntry .1.3.6.1.4.1.15450.2.2.6.1 |
mGuardFirewall11NATRuleEntryAn entry containing data of a single rule. MGuardFirewall11NATRuleEntry .1.3.6.1.4.1.15450.2.2.6.1.1 |
mGuardFW11NATruleIndexIndex to identify the rule. INTEGER .1.3.6.1.4.1.15450.2.2.6.1.1.1 |
mGuardFW11NATLocalNetwork for 1:1 NAT on local interface.rw IpAddress .1.3.6.1.4.1.15450.2.2.6.1.1.2 |
mGuardFW11NATRemoteNetwork for 1:1 NAT on remote interface.rw IpAddress .1.3.6.1.4.1.15450.2.2.6.1.1.3 |
mGuardFW11NATMaskNetmask for 1:1 NAT between 0 and 32.rw INTEGER .1.3.6.1.4.1.15450.2.2.6.1.1.4 |
mGuardFW11NATLogLog entries for this rule?rw Enumeration .1.3.6.1.4.1.15450.2.2.6.1.1.5 |
mGuardFW11NATRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.6.1.1.10 |
mGuardFirewallUserFW OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.2.7 |
mGuardFirewallUserFWEnabledEnable the user firewall.rw Enumeration .1.3.6.1.4.1.15450.2.2.7.1 |
mGuardFirewallUserFWTemplateTableA table containing user firewall templates. SEQUENCE OF MGuardFirewallUserFWTemplateEntry .1.3.6.1.4.1.15450.2.2.7.2 |
mGuardFirewallUserFWTemplateEntryAn entry containing a single user firewall template. MGuardFirewallUserFWTemplateEntry .1.3.6.1.4.1.15450.2.2.7.2.1 |
mGuardFirewallUserFWTemplateIndexIndex to identify the user firewall template entry. INTEGER .1.3.6.1.4.1.15450.2.2.7.2.1.1 |
mGuardFirewallUserFWTemplateEnabledEnable this user firewall template.rw Enumeration .1.3.6.1.4.1.15450.2.2.7.2.1.2 |
mGuardFirewallUserFWTemplateNameA descriptive name of the user firewall template.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.7.2.1.3 |
mGuardFirewallUserFWTemplateCommentA comment associated with the user firewall template.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.7.2.1.4 |
mGuardFirewallUserFWTemplateTimeoutThe timeout in seconds of the user firewall template.rw INTEGER .1.3.6.1.4.1.15450.2.2.7.2.1.5 |
mGuardFirewallUserFWTemplateSrcIPThe source IP address of the user firewall template.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.7.2.1.6 |
mGuardFirewallUserFWTemplateRowStatusRow Statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.7.2.1.7 |
mGuardFirewallUserFWTemplateUserTableA table containing the users associated with a user firewall template. SEQUENCE OF MGuardFirewallUserFWTemplateUserEntry .1.3.6.1.4.1.15450.2.2.7.3 |
mGuardFirewallUserFWTemplateUserEntryAn entry containing a single user associated with a user firewall template. MGuardFirewallUserFWTemplateUserEntry .1.3.6.1.4.1.15450.2.2.7.3.1 |
mGuardFirewallUserFWTemplateUserTemplateIndexIndex to identify the user firewall template entry. INTEGER .1.3.6.1.4.1.15450.2.2.7.3.1.1 |
mGuardFirewallUserFWTemplateUserIndexIndex to identify the user within the user firewall template entry. INTEGER .1.3.6.1.4.1.15450.2.2.7.3.1.2 |
mGuardFirewallUserFWTemplateUserNameThe username of the user within the user firewall template entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.7.3.1.3 |
mGuardFirewallUserFWTemplateUserRowStatusRow Statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.7.3.1.4 |
mGuardFirewallUserFWTemplateRuleTableA table containing the rules associated with a user firewall template. SEQUENCE OF MGuardFirewallUserFWTemplateRuleEntry .1.3.6.1.4.1.15450.2.2.7.4 |
mGuardFirewallUserFWTemplateRuleEntryAn entry containing a single rule associated with a user firewall template. MGuardFirewallUserFWTemplateRuleEntry .1.3.6.1.4.1.15450.2.2.7.4.1 |
mGuardFirewallUserFWTemplateRuleTemplateIndexIndex to identify the user firewall template entry. INTEGER .1.3.6.1.4.1.15450.2.2.7.4.1.1 |
mGuardFirewallUserFWTemplateRuleIndexIndex to identify the rule within the user firewall template entry. INTEGER .1.3.6.1.4.1.15450.2.2.7.4.1.2 |
mGuardFirewallUserFWTemplateRuleProtoThe protocol of the rule within the user firewall template entry.rw Enumeration .1.3.6.1.4.1.15450.2.2.7.4.1.3 |
mGuardFirewallUserFWTemplateRuleSrcPortThe source port or port range of the rule within the user firewall template entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.7.4.1.4 |
mGuardFirewallUserFWTemplateRuleDstPortThe destination port or port range of the rule within the user firewall template entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.7.4.1.5 |
mGuardFirewallUserFWTemplateRuleDstIPThe destination IP address of the rule within the user firewall template entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.7.4.1.6 |
mGuardFirewallUserFWTemplateRuleLogLog packets matching the rule within the user firewall template entry.rw Enumeration .1.3.6.1.4.1.15450.2.2.7.4.1.7 |
mGuardFirewallUserFWTemplateRuleCommentA comment associated with the rule within the user firewall template entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.7.4.1.8 |
mGuardFirewallUserFWTemplateRuleRowStatusRow Statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.2.7.4.1.9 |
mGuardNetwork OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.3 |
mGuardNetworkModeNetwork mode:
router,stealthro Enumeration .1.3.6.1.4.1.15450.2.3.1 |
mGuardStealth OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.3.2 |
mGuardStealthIPConfModeType of IP Stack configuration in stealth mode.
autodetect, static, multiple-clientsrw Enumeration .1.3.6.1.4.1.15450.2.3.2.1 |
mGuardStealthIPConfStatic OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.3.2.2 |
mGuardStealthStaticIPIP address of the protected client in stealth mode (using static ip
configuration).rw IpAddress .1.3.6.1.4.1.15450.2.3.2.2.1 |
mGuardStealthStaticMACMAC address of protected client in stealth mode (using static ip
configuration).rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.2.2.2 |
mGuardStealthStaticActivateButton to activate Stealth Static IP configuration.rw Enumeration .1.3.6.1.4.1.15450.2.3.2.2.3 |
mGuardStealthManageIPThe management IP address of this system in stealth mode
When set, this value is internally cached inside the agent until it
is explicitly activated by writing the mGuardStealthManageActivate
object. When read the currently active setting is returned, not
regarding any cached values.rw IpAddress .1.3.6.1.4.1.15450.2.3.2.2.4 |
mGuardStealthManageNetmaskThe management IP netmask of this system in stealth mode
When set, this value is internally cached inside the agent until it
is explicitly activated by writing the mGuardStealthManageActivate
object. When read the currently active setting is returned, not
regarding any cached values.rw IpAddress .1.3.6.1.4.1.15450.2.3.2.2.5 |
mGuardStealthManageGatewayThe default gateway for the management IP of the mGuard in
stealth mode When set, this value is internally cached inside the
agent until it is explicitly activated by writing the
mGuardStealthManageActivate object. When read the currently active
setting is returned, not regarding any cached values.rw IpAddress .1.3.6.1.4.1.15450.2.3.2.2.6 |
mGuardStealthManageActivateButton to activate the stealth management IP configuration. When
activate(1) is written, any cached values for the
mGuardStealthManageIP, mGuardStealthManageNetmask, and
mGuardStealthManageGateway objects are activated. When read and one
or more of the above mentioned objects have been cached,
valuescached(2) is returned, not regarding whether the cached valued
and the current value are different.rw Enumeration .1.3.6.1.4.1.15450.2.3.2.2.7 |
mGuardStealthHiDiscoveryRelayRelay/bridge HiDiscovery queries when in Stealth Mode.rw Enumeration .1.3.6.1.4.1.15450.2.3.2.3 |
mGuardStealthHiDiscoveryStateEnable HiDiscovery in StealthMode. This is mutually exclusive with
the two HiDiscovery router mode settings of course.rw Enumeration .1.3.6.1.4.1.15450.2.3.2.4 |
mGuardStealthL2Filter OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.3.2.5 |
mGuardL2FilterInternTableTable of firewall rules for Layer 2 filtering on internal interface. SEQUENCE OF MGuardL2FilterInternEntry .1.3.6.1.4.1.15450.2.3.2.5.1 |
mGuardL2FilterInternEntryA single rule for Layer-2 filter in internal interface. MGuardL2FilterInternEntry .1.3.6.1.4.1.15450.2.3.2.5.1.1 |
mGuardL2FilterInternRuleIndexTable index. INTEGER .1.3.6.1.4.1.15450.2.3.2.5.1.1.1 |
mGuardL2FilterInternRowStatusRow Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.2.5.1.1.2 |
mGuardL2FilterInternSrcMacSource MAC Address to apply this filter rule for.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.2.5.1.1.3 |
mGuardL2FilterInternDstMacDesitination MAC Address to apply this filter rule for.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.2.5.1.1.4 |
mGuardL2FilterInternEthTypeEthernet type to apply this filter rule for.rw INTEGER .1.3.6.1.4.1.15450.2.3.2.5.1.1.5 |
mGuardL2FilterInternTargetThe rule's targetrw Enumeration .1.3.6.1.4.1.15450.2.3.2.5.1.1.6 |
mGuardL2FilterInternCommentComment or name for this rule.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.2.5.1.1.7 |
mGuardL2FilterExternTableTable of firewall rules for Layer 2 filterin on external interface. SEQUENCE OF MGuardL2FilterExternEntry .1.3.6.1.4.1.15450.2.3.2.5.2 |
mGuardL2FilterExternEntryA single rule for Layer-2 filter in external interface. MGuardL2FilterExternEntry .1.3.6.1.4.1.15450.2.3.2.5.2.1 |
mGuardL2FilterExternRuleIndexTable index. INTEGER .1.3.6.1.4.1.15450.2.3.2.5.2.1.1 |
mGuardL2FilterExternRowStatusRow Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.2.5.2.1.2 |
mGuardL2FilterExternSrcMacSource MAC Address to apply this filter rule for.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.2.5.2.1.3 |
mGuardL2FilterExternDstMacDesitination MAC Address to apply this filter rule for.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.2.5.2.1.4 |
mGuardL2FilterExternEthTypeEthernet type to apply this filter rule for.rw INTEGER .1.3.6.1.4.1.15450.2.3.2.5.2.1.5 |
mGuardL2FilterExternTargetThe rule's targetrw Enumeration .1.3.6.1.4.1.15450.2.3.2.5.2.1.6 |
mGuardL2FilterExternCommentComment or name for this rule.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.2.5.2.1.7 |
mGuardStealthL2ForwardGVRPEnable GVRP forwarding in StealthMode.rw Enumeration .1.3.6.1.4.1.15450.2.3.2.5.3 |
mGuardStealthL2ForwardSTPEnable STP forwarding in StealthMode.rw Enumeration .1.3.6.1.4.1.15450.2.3.2.5.4 |
mGuardStealthL2ForwardDHCPEnable DHCP forwarding in StealthMode. This will allow computers on
the internal/protected side to receive their configuration via
DHCP even if no special DHCP rule is configured in the firewallrw Enumeration .1.3.6.1.4.1.15450.2.3.2.5.5 |
mGuardStealthInterface OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.3.2.6 |
mGuardStealthMTUMTU to use in Stealth Mode.rw INTEGER .1.3.6.1.4.1.15450.2.3.2.6.1 |
mGuardStealthVlanMTUMTU to use in Stealth Mode for VLAN packets.rw INTEGER .1.3.6.1.4.1.15450.2.3.2.6.2 |
mGuardStealthManageUseVLANUse VLAn tagging for the management IP address in Stealth Mode.rw Enumeration .1.3.6.1.4.1.15450.2.3.2.6.3 |
mGuardStealthManageVLanIDVLAN ID for the management IP address in Stealth Mode.rw INTEGER .1.3.6.1.4.1.15450.2.3.2.6.4 |
mGuardRouter OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.3.3 |
mGuardRouterLocal OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.3.3.1 |
mGuardRouterLocalIPThe internal IP address of this device in router mode. When set,
this value is internally cached inside the agent until it is
explicitly activated by writing the mGuardRouterLocalActivate
object. When read the currently active setting is returned,
not regarding any cached values.rw IpAddress .1.3.6.1.4.1.15450.2.3.3.1.1 |
mGuardRouterLocalNetmaskThe internal subnet mask of this device in router mode. When set,
this value is internally cached inside the agent until it is
explicitly activated by writing the mGuardRouterLocalActivate
object. When read the currently active setting is returned,
not regarding any cached values.rw IpAddress .1.3.6.1.4.1.15450.2.3.3.1.2 |
mGuardRouterLocalActivateButton to activate the router local IP configuration. When
activate(1) is written, any cached values for the mGuardRouterLocalIP,
mGuardRouterLocalNetmask, and mGuardRouterExternStaticGateway
objects are activated. When read and one or more of the above
mentioned objects have been cached, valuescached(2) is returned,
not regarding whether the cached valued and the current value
are different.rw Enumeration .1.3.6.1.4.1.15450.2.3.3.1.3 |
mGuardRouterLocalAliasesTableA table containing aliases for the local interface. SEQUENCE OF MGuardRouterLocalAliasesEntry .1.3.6.1.4.1.15450.2.3.3.1.4 |
mGuardRouterLocalAliasesEntryAn entry containing a single alias for the local interface. MGuardRouterLocalAliasesEntry .1.3.6.1.4.1.15450.2.3.3.1.4.1 |
mGuardLocalAliasIndexIdentifier. INTEGER .1.3.6.1.4.1.15450.2.3.3.1.4.1.1 |
mGuardLocalAliasIpAddressIP address.rw IpAddress .1.3.6.1.4.1.15450.2.3.3.1.4.1.2 |
mGuardLocalAliasNetmaskNetmask.rw IpAddress .1.3.6.1.4.1.15450.2.3.3.1.4.1.3 |
mGuardLocalAliasRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.3.1.4.1.4 |
mGuardLocalAliasUseVLANUse VLAn tagging with this Alias interface.rw Enumeration .1.3.6.1.4.1.15450.2.3.3.1.4.1.5 |
mGuardLocalAliasVLANidVLAN ID to be used with this Alias.rw INTEGER .1.3.6.1.4.1.15450.2.3.3.1.4.1.6 |
mGuardLocalRoutesTableA table containing additional internal routes interface. SEQUENCE OF MGuardLocalRoutesEntry .1.3.6.1.4.1.15450.2.3.3.1.5 |
mGuardLocalRoutesEntryAn entry containing a single internal route. MGuardLocalRoutesEntry .1.3.6.1.4.1.15450.2.3.3.1.5.1 |
mGuardLocalRouteIndexIdentifier. INTEGER .1.3.6.1.4.1.15450.2.3.3.1.5.1.1 |
mGuardLocalRouteNetworkRouted network.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.3.1.5.1.2 |
mGuardLocalRouteGatewayRouting gateway.rw IpAddress .1.3.6.1.4.1.15450.2.3.3.1.5.1.3 |
mGuardLocalRouteRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.3.1.5.1.4 |
mGuardRouterLocalDevMTUSet the MTU for the local interface. Router-Mode only.rw INTEGER .1.3.6.1.4.1.15450.2.3.3.1.6 |
mGuardRouterLocalUseVLANUse VLAN for the local interface. Router-Mode only.rw Enumeration .1.3.6.1.4.1.15450.2.3.3.1.7 |
mGuardRouterLocalVlanIdVLAN-ID for the local interface, used only if set to use VLAN. Router-Mode only.rw INTEGER .1.3.6.1.4.1.15450.2.3.3.1.8 |
mGuardRouterLocalDevVlanMTUSet the MTU for the VLAN if enabled on local interface. Router-Mode only.rw INTEGER .1.3.6.1.4.1.15450.2.3.3.1.9 |
mGuardRouterExtern OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.3.3.2 |
mGuardRouterExternDHCPWhen enabled, retrieve the external IP via DHCP, otherwise use
the value stored in mGuardRouterExternStaticIP.rw Enumeration .1.3.6.1.4.1.15450.2.3.3.2.1 |
mGuardRouterExternStatic OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.3.3.2.2 |
mGuardRouterExternStaticIPThe external IP address of this device in router mode
(when statically configured). When set, this value is internally
cached inside the agent until it is explicitly activated by writing
the mGuardRouterExternStaticActivate object. When read the currently
active setting is returned, not regarding any cached values.rw IpAddress .1.3.6.1.4.1.15450.2.3.3.2.2.1 |
mGuardRouterExternStaticNetmaskThe external netmask of this device in router mode (when
statically configured). When set, this value is internally cached
inside the agent until it is explicitly activated by writing the
mGuardRouterExternStaticActivate object. When read the currently
active setting is returned, not regarding any cached values.rw IpAddress .1.3.6.1.4.1.15450.2.3.3.2.2.2 |
mGuardRouterExternStaticGatewayThe (extern) default gateway of this device in router mode (when
statically configured). When set, this value is internally cached
inside the agent until it is explicitly activated by writing the
mGuardRouterExternStaticActivate or mGuardRouterLocalActivate object.
When read the currently active setting is returned, not regarding
any cached values.rw IpAddress .1.3.6.1.4.1.15450.2.3.3.2.2.3 |
mGuardRouterExternActivateButton to activate the router extern IP configuration. When
activate(1) is written, any cached values for the
mGuardRouterExternStaticIP, mGuardRouterExternStaticNetmask, and
mGuardRouterExternStaticGateway objects are activated. When read
and one or more of the above mentioned objects have been cached,
valuescached(2) is returned, not regarding whether the cached valued
and the current value are different.rw Enumeration .1.3.6.1.4.1.15450.2.3.3.2.2.4 |
mGuardRouterExternAliasesTableA table containing aliases for the external interface. SEQUENCE OF MGuardRouterExternAliasesEntry .1.3.6.1.4.1.15450.2.3.3.2.2.5 |
mGuardRouterExternAliasesEntryAn entry containing a single alias for the extern interface. MGuardRouterExternAliasesEntry .1.3.6.1.4.1.15450.2.3.3.2.2.5.1 |
mGuardExternAliasIndexIdentifier. INTEGER .1.3.6.1.4.1.15450.2.3.3.2.2.5.1.1 |
mGuardExternAliasIpAddressIP address.rw IpAddress .1.3.6.1.4.1.15450.2.3.3.2.2.5.1.2 |
mGuardExternAliasNetmaskNetmask.rw IpAddress .1.3.6.1.4.1.15450.2.3.3.2.2.5.1.3 |
mGuardExternAliasRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.3.2.2.5.1.4 |
mGuardExternAliasUseVLANUse VLAn tagging with this Alias interface.rw Enumeration .1.3.6.1.4.1.15450.2.3.3.2.2.5.1.5 |
mGuardExternAliasVLANidVLAN ID to be used with this Alias.rw INTEGER .1.3.6.1.4.1.15450.2.3.3.2.2.5.1.6 |
mGuardExternRoutesTableA table containing additional external routes. SEQUENCE OF MGuardExternRoutesEntry .1.3.6.1.4.1.15450.2.3.3.2.2.6 |
mGuardExternRoutesEntryAn entry containing a single external route. MGuardExternRoutesEntry .1.3.6.1.4.1.15450.2.3.3.2.2.6.1 |
mGuardExternRouteIndexIdentifier. INTEGER .1.3.6.1.4.1.15450.2.3.3.2.2.6.1.1 |
mGuardExternRouteNetworkRouted network.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.3.2.2.6.1.2 |
mGuardExternRouteGatewayRouting gateway.rw IpAddress .1.3.6.1.4.1.15450.2.3.3.2.2.6.1.3 |
mGuardExternRouteRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.3.2.2.6.1.4 |
mGuardRouterExternDevMTUSet the MTU for the external interface. Router-Mode only.rw INTEGER .1.3.6.1.4.1.15450.2.3.3.2.6 |
mGuardRouterExternUseVLANUse VLAN for the external interface. Router-Mode only.rw Enumeration .1.3.6.1.4.1.15450.2.3.3.2.7 |
mGuardRouterExternVlanIdVLAN-ID for the external interface, used only if set to use VLAN. Router-Mode only.rw INTEGER .1.3.6.1.4.1.15450.2.3.3.2.8 |
mGuardRouterExternDevVlanMTUSet the MTU for the VLAN if enabled on external interface. Router-Mode only.rw INTEGER .1.3.6.1.4.1.15450.2.3.3.2.9 |
mGuardRouterHiDiscovery OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.3.3.3 |
mGuardRouterHiDiscoveryInternEnable HiDiscovery on internal interface in RouterMode.rw Enumeration .1.3.6.1.4.1.15450.2.3.3.3.1 |
mGuardRouterHiDiscoveryExternEnable HiDiscovery on external interface in RouterMode.rw Enumeration .1.3.6.1.4.1.15450.2.3.3.3.2 |
mGuardPPPOE OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.3.4 |
mGuardPPPOELoginPPPoE login user name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.4.1 |
mGuardPPPOEPasswdPPPoE login password.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.4.2 |
mGuardPPPOEMSSThe maximum segment size used for PPPoErw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.4.3 |
mGuardPPPOEServiceNameThe service name used for PPPoE, normally not used!rwobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.4.4 |
mGuardPPPOEAccessConcentNameThe access concentrator name used for PPPoE, normally not used!rwobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.4.5 |
mGuardPPPOEHostUniqueSet 'Host-Unique' tag for discovery, required for operation with
several daemonsrwobsolete Enumeration .1.3.6.1.4.1.15450.2.3.4.6 |
mGuardPPPOEpppdOptionsTableA table of options set for the pppd process implementing PPPOE. SEQUENCE OF MGuardPPPOEpppdOptionsEntry .1.3.6.1.4.1.15450.2.3.4.7 |
mGuardPPPOEpppdOptionsEntryA single option set for pppd. MGuardPPPOEpppdOptionsEntry .1.3.6.1.4.1.15450.2.3.4.7.1 |
mGuardPPPOEpppdOptionsIndexTable index. INTEGER .1.3.6.1.4.1.15450.2.3.4.7.1.1 |
mGuardPPPOEpppdOptionsValueThe pppd option.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.4.7.1.2 |
mGuardPPPOEpppdOptionsRowStatusRow Statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.4.7.1.3 |
mGuardDHCP OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.3.5 |
mGuardDHCPInt OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.3.5.1 |
mGuardDHCPIntStartEnable the internal DHCP/DHCP Relay Server ?rw Enumeration .1.3.6.1.4.1.15450.2.3.5.1.1 |
mGuardDHCPIntPoolEnableEnable the dynamic DHCP Pool ?rw Enumeration .1.3.6.1.4.1.15450.2.3.5.1.2 |
mGuardDHCPIntRangeStartStart of ip range provided by the builtin DHCP Server for the internal network.rw IpAddress .1.3.6.1.4.1.15450.2.3.5.1.3 |
mGuardDHCPIntRangeEndEnd of ip range provided by the builtin DHCP Server for the internal network.rw IpAddress .1.3.6.1.4.1.15450.2.3.5.1.4 |
mGuardDHCPIntNetmaskNetmask provided by the builtin DHCP Server for the internal network.rw IpAddress .1.3.6.1.4.1.15450.2.3.5.1.5 |
mGuardDHCPIntGatewayDefault gateway provided by the builtin DHCP Server for the internal network.rw IpAddress .1.3.6.1.4.1.15450.2.3.5.1.6 |
mGuardDHCPIntDnsServerDNS Server provided by the builtin DHCP server.rw IpAddress .1.3.6.1.4.1.15450.2.3.5.1.7 |
mGuardDHCPIntStaticTableA table containing static MAC-IP address allocations. SEQUENCE OF MGuardDHCPIntStaticEntry .1.3.6.1.4.1.15450.2.3.5.1.8 |
mGuardDHCPIntStaticEntryAn entry containing a single MAC-IP address allocation. MGuardDHCPIntStaticEntry .1.3.6.1.4.1.15450.2.3.5.1.8.1 |
mGuardDHCPIntStaticIndexIndex to identify allocation entry. INTEGER .1.3.6.1.4.1.15450.2.3.5.1.8.1.1 |
mGuardDHCPIntStaticMACThe client's MAC addressrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.5.1.8.1.2 |
mGuardDHCPIntStaticIPThe allocated IP addressrw IpAddress .1.3.6.1.4.1.15450.2.3.5.1.8.1.3 |
mGuardDHCPIntStaticRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.5.1.8.1.4 |
mGuardDHCPIntBroadcastBroadcast address provided by the builtin DHCP server.rw IpAddress .1.3.6.1.4.1.15450.2.3.5.1.9 |
mGuardDHCPIntWINSWINS provided by the builtin DHCP Server for the internal network.rw IpAddress .1.3.6.1.4.1.15450.2.3.5.1.10 |
mGuardDHCPIntLeaseTimeLifetime for DHCP Leasesrw INTEGER .1.3.6.1.4.1.15450.2.3.5.1.11 |
mGuardDHCPIntRelayServerTableList of DHCP Servers to relay to. SEQUENCE OF MGuardDHCPIntRelayServerEntry .1.3.6.1.4.1.15450.2.3.5.1.50 |
mGuardDHCPIntRelayServerEntryAn entry containing a DHCP Relay Server IP. MGuardDHCPIntRelayServerEntry .1.3.6.1.4.1.15450.2.3.5.1.50.1 |
mGuardDHCPIntRelayServerIndexIndex to identify relay server entry. INTEGER .1.3.6.1.4.1.15450.2.3.5.1.50.1.1 |
mGuardDHCPIntRelayServerIPThe allocated IP addressrw IpAddress .1.3.6.1.4.1.15450.2.3.5.1.50.1.2 |
mGuardDHCPIntRelayRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.5.1.50.1.10 |
mGuardDHCPIntRelayMaxHopMaximal number of Hops when relaying.rw INTEGER .1.3.6.1.4.1.15450.2.3.5.1.51 |
mGuardDHCPIntRelayAppendWhether to append DHCP Relay Agent Information.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.5.1.52 |
mGuardDHCPIntRelayAppendLimitWhen appending DHCP Relay Agent Information would exceed
this limit, it is not appended.rw INTEGER .1.3.6.1.4.1.15450.2.3.5.1.53 |
mGuardDHCPIntRelayCircuitInfoWhat to append as Circuit ID:
none: no Cicuit ID
if-idx: the system interface index (1 octet)
if-name: the systems interface name (ascii)
if-mac: the MAC address (6 octets)
if-ip: the IP address (4 octets)
sysname: the systems hostname
text: a text defined in mGuardDHCPIntRelayCircuitText.0
if-prefixed-ip: prefix IP with 0xA1 Sub Remote ID (2+4 octets)
rs2: Hirschmann RS2 Sub Circuit Informationrw Enumeration .1.3.6.1.4.1.15450.2.3.5.1.54 |
mGuardDHCPIntRelayCircuitTextText in case mGuardDHCPIntRelayCircuitInfo.0 is set to text(7).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.5.1.55 |
mGuardDHCPIntRelayRemoteInfoWhat to append as Remote ID:
none: no Cicuit ID
if-idx: the system interface index (1 octet)
if-name: the systems interface name (ascii)
if-mac: the MAC address (6 octets)
if-ip: the IP address (4 octets)
sysname: the systems hostname
text: a text defined in mGuardDHCPIntRelayRemoteText.0
if-prefixed-ip: prefix IP with 0xA1 Sub Remote ID (2+4 octets)
rs2: Hirschmann RS2 Sub Circuit Informationrw Enumeration .1.3.6.1.4.1.15450.2.3.5.1.56 |
mGuardDHCPIntRelayRemoteTextText in case mGuardDHCPIntRelayRemoteInfo.0 is set to text(7).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.5.1.57 |
mGuardDHCPExt OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.3.5.2 |
mGuardDHCPExtStartEnable the external DHCP/DHCP Relay Server ?rw Enumeration .1.3.6.1.4.1.15450.2.3.5.2.1 |
mGuardDHCPExtPoolEnableEnable the dynamic DHCP Pool ?rw Enumeration .1.3.6.1.4.1.15450.2.3.5.2.2 |
mGuardDHCPExtRangeStartStart of ip range provided by the builtin DHCP Server for the external network.rw IpAddress .1.3.6.1.4.1.15450.2.3.5.2.3 |
mGuardDHCPExtRangeEndEnd of ip range provided by the builtin DHCP Server for the external network.rw IpAddress .1.3.6.1.4.1.15450.2.3.5.2.4 |
mGuardDHCPExtNetmaskNetmask provided by the builtin DHCP Server for the external network.rw IpAddress .1.3.6.1.4.1.15450.2.3.5.2.5 |
mGuardDHCPExtGatewayDefault gateway provided by the builtin DHCP Server for the external network.rw IpAddress .1.3.6.1.4.1.15450.2.3.5.2.6 |
mGuardDHCPExtDnsServerDNS Server provided by the builtin DHCP server.rw IpAddress .1.3.6.1.4.1.15450.2.3.5.2.7 |
mGuardDHCPExtStaticTableA table containing static MAC-IP address allocations. SEQUENCE OF MGuardDHCPExtStaticEntry .1.3.6.1.4.1.15450.2.3.5.2.8 |
mGuardDHCPExtStaticEntryAn entry containing a single MAC-IP address allocation. MGuardDHCPExtStaticEntry .1.3.6.1.4.1.15450.2.3.5.2.8.1 |
mGuardDHCPExtStaticIndexIndex to identify allocation entry. INTEGER .1.3.6.1.4.1.15450.2.3.5.2.8.1.1 |
mGuardDHCPExtStaticMACThe client's MAC addressrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.5.2.8.1.2 |
mGuardDHCPExtStaticIPThe allocated IP addressrw IpAddress .1.3.6.1.4.1.15450.2.3.5.2.8.1.3 |
mGuardDHCPExtStaticRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.5.2.8.1.4 |
mGuardDHCPExtBroadcastBroadcast address provided by the builtin DHCP server.rw IpAddress .1.3.6.1.4.1.15450.2.3.5.2.9 |
mGuardDHCPExtWINSWINS provided by the builtin DHCP Server for the external network.rw IpAddress .1.3.6.1.4.1.15450.2.3.5.2.10 |
mGuardDHCPExtLeaseTimeLifetime for DHCP Leasesrw INTEGER .1.3.6.1.4.1.15450.2.3.5.2.11 |
mGuardDHCPExtRelayServerTableList of DHCP Servers to relay to. SEQUENCE OF MGuardDHCPExtRelayServerEntry .1.3.6.1.4.1.15450.2.3.5.2.50 |
mGuardDHCPExtRelayServerEntryAn entry containing a DHCP Relay Server IP. MGuardDHCPExtRelayServerEntry .1.3.6.1.4.1.15450.2.3.5.2.50.1 |
mGuardDHCPExtRelayServerIndexIndex to identify relay server entry. INTEGER .1.3.6.1.4.1.15450.2.3.5.2.50.1.1 |
mGuardDHCPExtRelayServerIPThe allocated IP addressrw IpAddress .1.3.6.1.4.1.15450.2.3.5.2.50.1.2 |
mGuardDHCPExtRelayRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.5.2.50.1.10 |
mGuardDHCPExtRelayMaxHopMaximal number of Hops when relaying.rw INTEGER .1.3.6.1.4.1.15450.2.3.5.2.51 |
mGuardDHCPExtRelayAppendWhether to append DHCP Relay Agent Information.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.5.2.52 |
mGuardDHCPExtRelayAppendLimitWhen appending DHCP Relay Agent Information would exceed
this limit, it is not appended.rw INTEGER .1.3.6.1.4.1.15450.2.3.5.2.53 |
mGuardDHCPExtRelayCircuitInfoWhat to append as Circuit ID:
none: no Cicuit ID
if-idx: the system interface index (1 octet)
if-name: the systems interface name (ascii)
if-mac: the MAC address (6 octets)
if-ip: the IP address (4 octets)
sysname: the systems hostname
text: a text defined in mGuardDHCPExtRelayCircuitText.0
if-prefixed-ip: prefix IP with 0xA1 Sub Remote ID (2+4 octets)
rs2: Hirschmann RS2 Sub Circuit Informationrw Enumeration .1.3.6.1.4.1.15450.2.3.5.2.54 |
mGuardDHCPExtRelayCircuitTextText in case mGuardDHCPExtRelayCircuitInfo.0 is set to text(7).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.5.2.55 |
mGuardDHCPExtRelayRemoteInfoWhat to append as Remote ID:
none: no Cicuit ID
if-idx: the system interface index (1 octet)
if-name: the systems interface name (ascii)
if-mac: the MAC address (6 octets)
if-ip: the IP address (4 octets)
sysname: the systems hostname
text: a text defined in mGuardDHCPExtRelayRemoteText.0
if-prefixed-ip: prefix IP with 0xA1 Sub Remote ID (2+4 octets)
rs2: Hirschmann RS2 Sub Circuit Informationrw Enumeration .1.3.6.1.4.1.15450.2.3.5.2.56 |
mGuardDHCPExtRelayRemoteTextText in case mGuardDHCPExtRelayRemoteInfo.0 is set to text(7).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.5.2.57 |
mGuardDNS OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.3.6 |
mGuardDNSSearchPathDomain search path.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.6.1 |
mGuardDNSServerTypeType of DNS Servers to query:
root: DNS root servers
provider: Provider defined DNS Servers (via DHCP,PPPOE)
user: User defined DNS Serversrw Enumeration .1.3.6.1.4.1.15450.2.3.6.2 |
mGuardDNSUserDefinedServerTableA table containing user defined DNS Servers SEQUENCE OF MGuardDNSUserDefinedServerEntry .1.3.6.1.4.1.15450.2.3.6.3 |
mGuardDNSUserDefinedServerEntryA mGuardDNSServer entry. MGuardDNSUserDefinedServerEntry .1.3.6.1.4.1.15450.2.3.6.3.1 |
mGuarddnsServerIndexIndex to identify DNS Server entry. INTEGER .1.3.6.1.4.1.15450.2.3.6.3.1.1 |
mGuarddnsServerIPDNS Server IP address.rw IpAddress .1.3.6.1.4.1.15450.2.3.6.3.1.2 |
mGuarddnsServerRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.6.3.1.3 |
mGuardDNSCacheEnabledEnable or disable built-in DNS cache featurerw Enumeration .1.3.6.1.4.1.15450.2.3.6.4 |
mGuardNetworkStatus OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.3.7 |
mGuardNetworkStatModeCurrent network mode of this device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.7.1 |
mGuardNetworkStatExtIPexternal IP address of this device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.7.2 |
mGuardNetworkStatGatewayDefault gateway via the external IP address.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.7.3 |
mGuardNetworkStatVPNStatistics about the VPN connections (total/used/up).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.7.4 |
mGuardNetworkStatDynIPRegStatistics about VPN DynIP registration.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.7.5 |
mGuardNetworkStatHTTPSRemAccessStatus of HTTPS remote access (yes/no).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.7.6 |
mGuardNetworkStatSSHRemoteAccessStatus of SSH remote access (yes/no).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.7.7 |
mGuardNetworkSoftwareVersionCurrent software version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.7.8 |
mGuardNetworkStatUptimeUptime.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.7.9 |
mGuardNetworkStatLanguageGAI Language.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.7.10 |
mGuardHostnameThe hostname of this systemrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.8 |
mGuardHostnameModeHostname mode:
1: defined by mGuardHostname,
2: provider defined (e.g. DHCP)rw Enumeration .1.3.6.1.4.1.15450.2.3.9 |
mGuardPPTP OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.3.10 |
mGuardPPTPLoginPPTP loginrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.10.1 |
mGuardPPTPasswordPPTP passwordrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.10.2 |
mGuardPPTPLocalIPModeWhen set to static will use the value from mGuardPPTPLocalIP on it
external interface connecting to the PPTP server/modem. Otherwise it
it use DHCP.rw Enumeration .1.3.6.1.4.1.15450.2.3.10.3 |
mGuardPPTPLocalIPThe external IP of this system when connecting to the PPTP server/modem
when mGuardPPTPLocalIPMode is set to static.rw IpAddress .1.3.6.1.4.1.15450.2.3.10.4 |
mGuardPPTPModemIPThe IP of the PPTP server/modem.rw IpAddress .1.3.6.1.4.1.15450.2.3.10.5 |
mGuardPPTPpppdOptionsTableA table of options set for the pppd process implementing PPTP. SEQUENCE OF MGuardPPTPpppdOptionsEntry .1.3.6.1.4.1.15450.2.3.10.6 |
mGuardPPTPpppdOptionsEntryA single option set for pppd. MGuardPPTPpppdOptionsEntry .1.3.6.1.4.1.15450.2.3.10.6.1 |
mGuardPPTPpppdOptionsIndexTable index. INTEGER .1.3.6.1.4.1.15450.2.3.10.6.1.1 |
mGuardPPTPpppdOptionsValueThe pppd option.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.10.6.1.2 |
mGuardPPTPpppdOptionsRowStatusRow Statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.10.6.1.3 |
mGuardSerial OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.3.11 |
mGuardSerialBaudBaudrate for the serial line. Possible values are 9600, 19200,
38400, 57600rw INTEGER .1.3.6.1.4.1.15450.2.3.11.1 |
mGuardSerialHWHandshakeEnableEnable hardware handshakerw Enumeration .1.3.6.1.4.1.15450.2.3.11.2 |
mGuardSerialPPP OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.3.11.3 |
mGuardSerialPPPEnableEnable PPPrw Enumeration .1.3.6.1.4.1.15450.2.3.11.3.1 |
mGuardSerialPPPLoginLogin for Serial PPP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.11.3.2 |
mGuardSerialPPPPasswdPassword for Serial PPP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.11.3.3 |
mGuardSerialPPPLocalIPLocal IP address for PPP.rw IpAddress .1.3.6.1.4.1.15450.2.3.11.3.4 |
mGuardSerialPPPRemoteIPRemote IP address for PPP.rw IpAddress .1.3.6.1.4.1.15450.2.3.11.3.5 |
mGuardSerialPPPFWIN OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.3.11.3.6 |
mGuardSerialPPPFWINTableA table containing firewall rules for incoming packets. SEQUENCE OF MGuardSerialPPPFWINEntry .1.3.6.1.4.1.15450.2.3.11.3.6.1 |
mGuardSerialPPPFWINEntryAn entry containing data of a single rule. MGuardSerialPPPFWINEntry .1.3.6.1.4.1.15450.2.3.11.3.6.1.1 |
mGuardSerialPPPFWINruleIndexIndex to identify the rule. INTEGER .1.3.6.1.4.1.15450.2.3.11.3.6.1.1.1 |
mGuardSerialPPPFWINsourceIPThe rule's source IP addressrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.11.3.6.1.1.2 |
mGuardSerialPPPFWINdestinationIPThe rule's source IP addressrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.11.3.6.1.1.3 |
mGuardSerialPPPFWINsportThe rule's source portrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.11.3.6.1.1.4 |
mGuardSerialPPPFWINdportThe rule's destination portrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.11.3.6.1.1.5 |
mGuardSerialPPPFWINtargetThe rule's targetrw Enumeration .1.3.6.1.4.1.15450.2.3.11.3.6.1.1.6 |
mGuardSerialPPPFWINprotoThe rule's protocolrw Enumeration .1.3.6.1.4.1.15450.2.3.11.3.6.1.1.7 |
mGuardSerialPPPFWINlogLog packets matching this rule ?rw Enumeration .1.3.6.1.4.1.15450.2.3.11.3.6.1.1.8 |
mGuardSerialPPPFWINRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.11.3.6.1.1.9 |
mGuardSerialPPPFWINcommentCommentary or name for this rule.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.11.3.6.1.1.10 |
mGuardSerialPPPFWINLogDefaultLog entries for undefined incoming connection attemps.rw Enumeration .1.3.6.1.4.1.15450.2.3.11.3.6.2 |
mGuardSerialPPPFWOUT OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.3.11.3.7 |
mGuardSerialPPPFWOUTTableA table containing firewall rules for incoming packets. SEQUENCE OF MGuardSerialPPPFWOUTEntry .1.3.6.1.4.1.15450.2.3.11.3.7.1 |
mGuardSerialPPPFWOUTEntryAn entry containing data of a single rule. MGuardSerialPPPFWOUTEntry .1.3.6.1.4.1.15450.2.3.11.3.7.1.1 |
mGuardSerialPPPFWOUTruleIndexIndex to identify the rule. INTEGER .1.3.6.1.4.1.15450.2.3.11.3.7.1.1.1 |
mGuardSerialPPPFWOUTsourceIPThe rule's source IP addressrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.11.3.7.1.1.2 |
mGuardSerialPPPFWOUTtargetIPThe rule's source IP addressrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.11.3.7.1.1.3 |
mGuardSerialPPPFWOUTsportThe rule's source portrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.11.3.7.1.1.4 |
mGuardSerialPPPFWOUTdportThe rule's destination portrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.11.3.7.1.1.5 |
mGuardSerialPPPFWOUTtargetThe rule's targetrw Enumeration .1.3.6.1.4.1.15450.2.3.11.3.7.1.1.6 |
mGuardSerialPPPFWOUTprotoThe rule's protocolrw Enumeration .1.3.6.1.4.1.15450.2.3.11.3.7.1.1.7 |
mGuardSerialPPPFWOUTlogLog packets matching this rule ?rw Enumeration .1.3.6.1.4.1.15450.2.3.11.3.7.1.1.8 |
mGuardSerialPPPFWOUTRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.11.3.7.1.1.9 |
mGuardSerialPPPFWOUTcommentCommentary or name for this rule.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.3.11.3.7.1.1.10 |
mGuardSerialPPPFWOUTLogDefaultLog entries for unknown outgoing connection attemps ?rw Enumeration .1.3.6.1.4.1.15450.2.3.11.3.7.2 |
mGuardArpTimeoutGlobal ARP timeout in seconds.rw INTEGER .1.3.6.1.4.1.15450.2.3.12 |
mGuardSystem OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.4 |
mGuardPasswords OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.4.1 |
mGuardRootPasswordObject to change the root password.
Change by setting: <old root password> <new root password>rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.1.1 |
mGuardAdminPasswordObject to change the admin password.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.1.2 |
mGuardUserPasswordObject to change the user password.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.1.3 |
mGuardUserPwdEnableEnable user password ?
yes,norw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.1.4 |
mGuardHTTPSRemoteAccess OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.4.2 |
mGuardHTTPSRemoteEnableValue to control HTTPS remote access:
yes: enabled
no: disabledrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.2.1 |
mGuardHTTPSRemotePortPort for HTTPS remote Access (regularly 443), service names allowed.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.2.2 |
mGuardHTTPSRemoteFWRuleTableA table containing firewall rules to allow HTTPS remote access. SEQUENCE OF MGuardHTTPSRemoteFWRuleEntry .1.3.6.1.4.1.15450.2.4.2.3 |
mGuardHTTPSRemoteFWRuleEntryAn entry containing a single firewall rule to allow HTTPS remote access. MGuardHTTPSRemoteFWRuleEntry .1.3.6.1.4.1.15450.2.4.2.3.1 |
mGuardHTTPSFWruleIndexIndex to identify rule. INTEGER .1.3.6.1.4.1.15450.2.4.2.3.1.1 |
mGuardHTTPSFWsourceIPThe rule's source IP addressrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.2.3.1.2 |
mGuardHTTPSFWinterfaceThe network interface the rule belongs to (extern/intern).rw Enumeration .1.3.6.1.4.1.15450.2.4.2.3.1.3 |
mGuardHTTPSFWtargetThe target of the rule (accept,reject,drop).rw Enumeration .1.3.6.1.4.1.15450.2.4.2.3.1.4 |
mGuardHTTPSFWlogLog packets matching this rule ?rw Enumeration .1.3.6.1.4.1.15450.2.4.2.3.1.5 |
mGuardHTTPSFWRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.2.3.1.6 |
mGuardHTTPSFWcommentCommentary or name for this rule.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.2.3.1.7 |
mGuardSSHRemoteAccess OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.4.3 |
mGuardSSHRemoteEnableValue to control SSH remote access:
yes: enabled
no: disabledrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.3.1 |
mGuardSSHRemotePortPort for SSH remote Access (regularly 22), service names allowed.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.3.2 |
mGuardSSHRemoteFWRuleTableA table containing firewall rules to allow SSH remote access. SEQUENCE OF MGuardSSHRemoteFWRuleEntry .1.3.6.1.4.1.15450.2.4.3.3 |
mGuardSSHRemoteFWRuleEntryAn entry containing a single firewall rule to allow SSH remote access. MGuardSSHRemoteFWRuleEntry .1.3.6.1.4.1.15450.2.4.3.3.1 |
mGuardSSHFWruleIndexIndex to identify rule. INTEGER .1.3.6.1.4.1.15450.2.4.3.3.1.1 |
mGuardSSHFWsourceIPThe rule's source IP addressrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.3.3.1.2 |
mGuardSSHFWinterfaceThe network interface the rule belongs to (extern/intern).rw Enumeration .1.3.6.1.4.1.15450.2.4.3.3.1.3 |
mGuardSSHFWtargetThe target of the rule (accept/reject/drop).rw Enumeration .1.3.6.1.4.1.15450.2.4.3.3.1.4 |
mGuardSSHFWlogLog packets matching this rule ?rw Enumeration .1.3.6.1.4.1.15450.2.4.3.3.1.5 |
mGuardSSHFWRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.3.3.1.6 |
mGuardSSHFWcommentCommentary or name for this rule.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.3.3.1.7 |
mGuardWebInterface OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.4.4 |
mGuardWebInterfaceLanguageThe language used in the web interface.rw Enumeration .1.3.6.1.4.1.15450.2.4.4.1 |
mGuardWebInterfaceSessionTimeoutThe session timeout of the web interface in seconds. If no changes are submitted
for the specified time, the session is terminated and it will be necessary to log
in again before further use of the web interface.rw INTEGER .1.3.6.1.4.1.15450.2.4.4.2 |
mGuardWebInterfaceApplyButtonScopeThe scope of the Apply button in the web interface.rw Enumeration .1.3.6.1.4.1.15450.2.4.4.3 |
mGuardHardwareInformation OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.4.5 |
mGuardHardwareThe hardware of the mGuard.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.5.1 |
mGuardCPUThe CPU name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.5.2 |
mGuardCPUFamilyThe CPU family.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.5.3 |
mGuardCPUSteppingThe CPU stepping.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.5.4 |
mGuardCPUSpeedThe CPU speed in MHz.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.5.5 |
mGuardSystemTemperatureThe current system temperature (in degrees Celsius).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.5.6 |
mGuardUptimeThe system uptime.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.5.7 |
mGuardUSMemThe userspace memory.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.5.8 |
mGuardMAC1The MAC address of the first network interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.5.9 |
mGuardMAC2The MAC address of the second network interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.5.10 |
mGuardMAC3The MAC address of the third network interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.5.11 |
mGuardSerialNumberThe system's serial number .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.5.12 |
mGuardVerParSetThe parameterset version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.5.13 |
mGuardProductNameThe product name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.5.14 |
mGuardOEMNameThe name of the OEM.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.5.15 |
mGuardOEMSerialThe OEM serial number .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.5.16 |
mGuardManufacturerThe system manufacturer.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.5.17 |
mGuardManuDateDate of manufacturing.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.5.18 |
mGuardBootLoaderThe bootloader used at production .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.5.19 |
mGuardHardwareVersionThe hardware version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.5.20 |
mGuardRescueSystemThe rescue system used at production .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.5.21 |
mGuardProdSoftThe software used at production .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.5.22 |
mGuardVersions OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.4.7 |
mGuardVersionThe current version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.7.1 |
mGuardBaseVersionThe base version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.7.2 |
mGuardUpdatesPerformed updates.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.7.3 |
mGuardPackageVersionTablePackage descriptions. SEQUENCE OF MGuardPackageVersionEntry .1.3.6.1.4.1.15450.2.4.7.4 |
mGuardPackageVersionEntryDescription of a single package. MGuardPackageVersionEntry .1.3.6.1.4.1.15450.2.4.7.4.1 |
mGuardPkgIndexIndex to identify package. INTEGER .1.3.6.1.4.1.15450.2.4.7.4.1.1 |
mGuardPkgNamePackage name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.7.4.1.2 |
mGuardPkgVerNumPackage version number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.7.4.1.3 |
mGuardPkgVerVersionPackage version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.7.4.1.4 |
mGuardPkgVerFlavourPackage flavour.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.4.7.4.1.5 |
mGuardActionIf set to 1, the system reboots.rw Enumeration .1.3.6.1.4.1.15450.2.4.8 |
mGuardSysProductManufacturer-defined product identifier.ro Enumeration .1.3.6.1.4.1.15450.2.4.9 |
mGuardSNMP OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.5 |
mGuardSNMPenableV3Should SNMPv3 be enabled ?rw Enumeration .1.3.6.1.4.1.15450.2.5.1 |
mGuardSNMPenableV1Should SNMPv1 be enabled ?rw Enumeration .1.3.6.1.4.1.15450.2.5.2 |
mGuardSNMPportThe port the snmp agent listens to.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.5.3 |
mGuardSNMPv1ROCommunityRead-only community string for SNMPv1.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.5.4 |
mGuardSNMPv1RWCommunityRead-write community string for SNMPv1.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.5.5 |
mGuardSNMPFWRuleTableA table containing firewall rules to allow SNMP access. SEQUENCE OF MGuardSNMPFWRuleEntry .1.3.6.1.4.1.15450.2.5.6 |
mGuardSNMPFWRuleEntryAn entry containing a single firewall rule to allow SNMP access. MGuardSNMPFWRuleEntry .1.3.6.1.4.1.15450.2.5.6.1 |
mGuardSNMPFWruleIndexIndex to identify rule. INTEGER .1.3.6.1.4.1.15450.2.5.6.1.1 |
mGuardSNMPFWsourceIPThe rule's source IP addressrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.5.6.1.2 |
mGuardSNMPFWinterfaceThe network interface the rule belongs to (extern/intern).rw Enumeration .1.3.6.1.4.1.15450.2.5.6.1.3 |
mGuardSNMPFWtargetThe target of the rule (accept/reject/drop).rw Enumeration .1.3.6.1.4.1.15450.2.5.6.1.4 |
mGuardSNMPFWlogLog packets matching this rule ?rw Enumeration .1.3.6.1.4.1.15450.2.5.6.1.5 |
mGuardSNMPFWRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.5.6.1.6 |
mGuardSNMPFWcommentCommentary or name for this rule.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.5.6.1.7 |
mGuardSNMPTrapReceiverTableTrap messages are sent across a network to an SNMP Network Manager.
These messages alert the manager to events occurring within the security
gateway or on the network. Up to six simultaneous trap receivers are supported. SEQUENCE OF MGuardSNMPTrapReceiverEntry .1.3.6.1.4.1.15450.2.5.7 |
mGuardSNMPTrapReceiverEntrySecurity gateway's Snmp Trap Receiver Config entry MGuardSNMPTrapReceiverEntry .1.3.6.1.4.1.15450.2.5.7.1 |
mGuardSNMPTrapReceiverIndexThe security gateway's Snmp Trap Receiver Index INTEGER .1.3.6.1.4.1.15450.2.5.7.1.1 |
mGuardSNMPTrapReceiverCommunityThe security gateway's Snmp Trap Receiver Community Name.
This is the SNMP community name of the remote network manager;
the name can be up to 16 characters (????), and is case-sensitive.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.5.7.1.2 |
mGuardSNMPTrapReceiverIPAddressIP Address - Each IP address parameter is four integer numbers.
The numbers range from 0 to 255.rw IpAddress .1.3.6.1.4.1.15450.2.5.7.1.3 |
mGuardSNMPTrapReceiverNameThe name of this Trap Receiver entryrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.5.7.1.4 |
mGuardSNMPTrapReceiverRowStatusThe security gateway's Snmp Trap Reciever Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.5.7.1.5 |
mGuardSNMPTrapConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.5.8 |
mGuardSNMPAuthenticationTrapFlagAuthentication Flag - Enable/Disable SNMP authentication trap.rw Enumeration .1.3.6.1.4.1.15450.2.5.8.1 |
mGuardSNMPLinkUpDownTrapFlagLink Up/Down Flag - Enable/Disable Link Up/Link Down traps for the
entire security gateway.rw Enumeration .1.3.6.1.4.1.15450.2.5.8.2 |
mGuardSNMPColdStartTrapFlagColdStart Flag - Enable/Disable SNMP coldstart trap.rw Enumeration .1.3.6.1.4.1.15450.2.5.8.3 |
mGuardSNMPTrapFlagEnables/Disables the traps with enterprise = mGuardb.rw Enumeration .1.3.6.1.4.1.15450.2.5.8.4 |
mGuardSNMPChassisTrapFlagEnables/Disables the traps with enterprise = hmChassis.rw Enumeration .1.3.6.1.4.1.15450.2.5.8.5 |
mGuardSNMPAgentTrapFlagEnables/Disables the traps with enterprise = hmAgent.rw Enumeration .1.3.6.1.4.1.15450.2.5.8.6 |
mGuardSNMPAvFailTrapFlagEnables/Disables the traps with AntiVirus failures (update or engine failures).rw Enumeration .1.3.6.1.4.1.15450.2.5.8.7 |
mGuardSNMPAvInfoTrapFlagEnables/Disables the traps with informational AntiVirus messages.rw Enumeration .1.3.6.1.4.1.15450.2.5.8.8 |
mGuardSNMPBladeStateTrapFlagEnables/Disables traps sent at blade status change.rw Enumeration .1.3.6.1.4.1.15450.2.5.8.9 |
mGuardSNMPBladeConfigTrapFlagEnables/Disables traps sent at automatic blade configuration or backup.rw Enumeration .1.3.6.1.4.1.15450.2.5.8.10 |
mGuardSNMPRouterRedundancyStatusFlagEnables/Disables traps sent at change of HA state.rw Enumeration .1.3.6.1.4.1.15450.2.5.8.11 |
mGuardNTP OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.6 |
mGuardNTPactivateActivate NTP ?rw Enumeration .1.3.6.1.4.1.15450.2.6.1 |
mGuardNTPtimestampTime stamp in filesystem ?rw Enumeration .1.3.6.1.4.1.15450.2.6.2 |
mGuardNTPServerTableA table of NTP Servers. SEQUENCE OF MGuardNTPServerEntry .1.3.6.1.4.1.15450.2.6.3 |
mGuardNTPServerEntryA single NTP Server. MGuardNTPServerEntry .1.3.6.1.4.1.15450.2.6.3.1 |
mGuardNTPServerIndexTable index INTEGER .1.3.6.1.4.1.15450.2.6.3.1.1 |
mGuardNTPServerHostHostname or IP address of the NTP Server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.6.3.1.2 |
mGuardNTPServerRowStatusRow statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.6.3.1.3 |
mGuardNTPTimezoneTimezone in POSIX.1 notationrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.6.4 |
mGuardNTPStatusNTP statero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.6.5 |
mGuardUpdate OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.7 |
mGuardUpdateServerTableA table of update server repositories. SEQUENCE OF MGuardUpdateServerEntry .1.3.6.1.4.1.15450.2.7.1 |
mGuardUpdateServerEntryA single update server repository. MGuardUpdateServerEntry .1.3.6.1.4.1.15450.2.7.1.1 |
mGuardUpdateServerIndexTable index. INTEGER .1.3.6.1.4.1.15450.2.7.1.1.1 |
mGuardUpdateServerURL of the update server.rwdeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.7.1.1.2 |
mGuardUpdateServerRowStatusRow Statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.7.1.1.3 |
mGuardUpdateServerProtoProtocol, either https or httprw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.7.1.1.4 |
mGuardUpdateServerHostHostname of the update server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.7.1.1.5 |
mGuardUpdateServerLoginLogin on the update server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.7.1.1.6 |
mGuardUpdateServerPasswordPassword on the update server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.7.1.1.7 |
mGuardSNMPErrorField, providing textual description of errors caused by SNMP
operations.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.8 |
mGuardRedundancy OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.9 |
mGuardRouterRedundancy OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.9.2 |
mGuardRouterRedundancyEnableEnable Router Redundancy.rw Enumeration .1.3.6.1.4.1.15450.2.9.2.1 |
mGuardRouterRedundancyTrackRun ICMP checks against redundancy peer.rw Enumeration .1.3.6.1.4.1.15450.2.9.2.2 |
mGuardRouterRedundancyInternalIDInternal ID of the virtual router.rw INTEGER .1.3.6.1.4.1.15450.2.9.2.3 |
mGuardRouterRedundancyExternalIDExternal ID of the virtual router.rw INTEGER .1.3.6.1.4.1.15450.2.9.2.4 |
mGuardRouterRedundancyPasswordPasswort for synchronization between the virtual router peers.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.9.2.5 |
mGuardRouterRedundancyPeerInternInternal IP of the VR peer.rw IpAddress .1.3.6.1.4.1.15450.2.9.2.6 |
mGuardRouterRedundancyPeerExternExternal IP of the VR peer.rw IpAddress .1.3.6.1.4.1.15450.2.9.2.7 |
mGuardRouterRedundancyPriorityPriority for the virtual router.rw INTEGER .1.3.6.1.4.1.15450.2.9.2.8 |
mGuardRouterRedundancyVirtIpIntVirtual IP address of the HA cluster for the internal network.rw IpAddress .1.3.6.1.4.1.15450.2.9.2.9 |
mGuardRouterRedundancyVirtIpExtVirtual IP address of the HA cluster for the external network.rw IpAddress .1.3.6.1.4.1.15450.2.9.2.10 |
mGuardRouterRedundancyWantStateHA cluster state to start this mGuard with at boot time.rw Enumeration .1.3.6.1.4.1.15450.2.9.2.11 |
mGuardRouterRedExtHostCheckTableA table of hosts to check with ICMP for detecting the VR state. SEQUENCE OF MGuardRouterRedExtHostCheckEntry .1.3.6.1.4.1.15450.2.9.2.12 |
mGuardRouterRedExtHostCheckEntryExternal hosts to check with ICMP for detecting the VR state. MGuardRouterRedExtHostCheckEntry .1.3.6.1.4.1.15450.2.9.2.12.1 |
mGuardRouterRedExtHostCheckIndexTable index. INTEGER .1.3.6.1.4.1.15450.2.9.2.12.1.1 |
mGuardRouterRedExtHostCheckIPThe IP address.rw IpAddress .1.3.6.1.4.1.15450.2.9.2.12.1.2 |
mGuardRouterRedExtHostCheckRowStRow Statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.9.2.12.1.3 |
mGuardRouterRedIntHostCheckTableA table of hosts to check with ICMP for detecting the VR state. SEQUENCE OF MGuardRouterRedIntHostCheckEntry .1.3.6.1.4.1.15450.2.9.2.13 |
mGuardRouterRedIntHostCheckEntryExternal hosts to check with ICMP for detecting the VR state. MGuardRouterRedIntHostCheckEntry .1.3.6.1.4.1.15450.2.9.2.13.1 |
mGuardRouterRedIntHostCheckIndexTable index. INTEGER .1.3.6.1.4.1.15450.2.9.2.13.1.1 |
mGuardRouterRedIntHostCheckIPThe IP address.rw IpAddress .1.3.6.1.4.1.15450.2.9.2.13.1.2 |
mGuardRouterRedIntHostCheckRowStRow Statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.9.2.13.1.3 |
mGuardRouterRedundancyStateCurrent HA cluster state.ro Enumeration .1.3.6.1.4.1.15450.2.9.2.14 |
mGuardInfo OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.10 |
mGuardHTTPSLastAccessIPAddress of the last IP from which a wrong authentication information
was sent for HTTPS access was sent.ro IpAddress .1.3.6.1.4.1.15450.2.10.1 |
mGuardShellLastAccessIPAddress of the last IP from which a login event occured.ro IpAddress .1.3.6.1.4.1.15450.2.10.2 |
mGuardDHCPLastAccessMACMAC Address of the last unknown client trying to obtain a lease.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.15450.2.10.3 |
mGuardTrapResources OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.10.4 |
mGuardTResDiscFullStatus of file system free space. If multiple file systems, the worst state is used.ro Enumeration .1.3.6.1.4.1.15450.2.10.4.1 |
mGuardTResCpuLoadHighCPU load (uptime*10).ro INTEGER .1.3.6.1.4.1.15450.2.10.4.2 |
mGuardTResMemoryFullFree memory (RAM) in KiByte.ro INTEGER .1.3.6.1.4.1.15450.2.10.4.3 |
mGuardTResColdstartTrap sent when system rebooted (snmp daemon started).ro INTEGER .1.3.6.1.4.1.15450.2.10.4.4 |
mGuardTResAV OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.10.4.6 |
mGuardTResAvUpdateDoneAV Update was performed successfully.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.10.4.6.1 |
mGuardTResAvUpdateErrorError when performing AV Update.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.10.4.6.2 |
mGuardTResAvVirusDetectedAV found a virus.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.10.4.6.3 |
mGuardTResAvFileNotScannedThe file was not scanned for viruses.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.10.4.6.4 |
mGuardTResAvFailedGeneral AV failure.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.10.4.6.5 |
mGuardTResPlatformSpecific OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.10.4.7 |
mGuardTResIndustrial OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.10.4.7.1 |
mGuardTResIndustrialPower OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.10.4.7.1.1 |
mGuardPSTableThis table contains all variables related to the power supply
units of the chassis/switch. For each power supply slot exists
one instance. SEQUENCE OF MguardPSEntry .1.3.6.1.4.1.15450.2.10.4.7.1.1.2 |
mGuardPSEntryPower supply entry MguardPSEntry .1.3.6.1.4.1.15450.2.10.4.7.1.1.2.1 |
mGuardPSSysIDThe value of SysID is assigned so as to uniquely identify a
chassis/switch among the subordinate managed objects of the
system.ro INTEGER .1.3.6.1.4.1.15450.2.10.4.7.1.1.2.1.1 |
mGuardPSIDThis Index is used to identify the associated power supply unit.ro INTEGER .1.3.6.1.4.1.15450.2.10.4.7.1.1.2.1.2 |
mGuardPSStateIndicates the operational state of the associated power supply. If
the value of this variable changes, a mGuardPowerSupply trap is sent.ro Enumeration .1.3.6.1.4.1.15450.2.10.4.7.1.1.2.1.3 |
mGuardTResIndustrialTemperature OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.10.4.7.1.2 |
mGuardTResIndustrialTempHiLimitUpper limit of allowed system temperature.rw INTEGER .1.3.6.1.4.1.15450.2.10.4.7.1.2.2 |
mGuardTResIndustrialTempLowLimitLower limit of allowed system temperature.rw INTEGER .1.3.6.1.4.1.15450.2.10.4.7.1.2.3 |
mGuardTResSignalRelais OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.10.4.7.1.3 |
mGuardTResSignalRelaisStateCurrent state of the signal relais (1=on, 2=off).ro INTEGER .1.3.6.1.4.1.15450.2.10.4.7.1.3.1 |
mGuardTResSignalRelaisReasonReason why the signal relais was triggered.ro OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.10.4.7.1.3.2 |
mGuardTResSignalRelaisReasonIdxReason number (ue0=1, ue1=2, number of TX bytes for eth).ro INTEGER .1.3.6.1.4.1.15450.2.10.4.7.1.3.3 |
mGuardTResSignalRelaisPowerAlarmEnables/disables an alarm for the signalling relay of the powersupply state.rw Enumeration .1.3.6.1.4.1.15450.2.10.4.7.1.3.4 |
mGuardTResSignalRelaisModeWhen set to standard, this is the default, the signalling relay shows the state of
hmRS2SigRelayState.
When set to manual, the relay is controlled by the configured Manual State.rw Enumeration .1.3.6.1.4.1.15450.2.10.4.7.1.3.5 |
mGuardTResSignalRelaisManualStatWhen set to on, this is the default, the signalling relay is opened.
When set to off the relay is closed.rw Enumeration .1.3.6.1.4.1.15450.2.10.4.7.1.3.6 |
mGuardTResAutoConfigAdapterStateTrap sent when ACA was accessed.ro Enumeration .1.3.6.1.4.1.15450.2.10.4.7.1.4 |
mGuardTResSignalLinkTable OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.10.4.7.1.5 |
mGuardTResSigLinkIDThis index is used to identify the associated link and
corresponds with ifMauIfIndex.ro INTEGER .1.3.6.1.4.1.15450.2.10.4.7.1.5.1 |
mGuardTResSigLinkAlarmDURABLE: { off:all }
Indicates whether an alarm for the signalling relay of the
associated link will be produced or not, so you can mask the
value of ifMauMediaAvailable.rw Enumeration .1.3.6.1.4.1.15450.2.10.4.7.1.5.2 |
mGuardTResBladeCTRL OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.10.4.7.2 |
mGuardTResBladeInfo OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.10.4.7.2.1 |
mGuardTResBladeRackIDRack ID in question when sending a Blade-related SNMP trap.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.10.4.7.2.1.1 |
mGuardTResBladeSlotNrSlot ID in question when sending a Blade-related SNMP trap.ro INTEGER .1.3.6.1.4.1.15450.2.10.4.7.2.1.2 |
mGuardTResBladeCtrlPowerStatusStatus of the BladePack's power supplies when sending an SNMP trap.ro Enumeration .1.3.6.1.4.1.15450.2.10.4.7.2.2 |
mGuardTResBladeCtrlRunStatusStatus of the Blade's run status when sending an SNMP trap.ro Enumeration .1.3.6.1.4.1.15450.2.10.4.7.2.3 |
mGuardTResBladeCtrlCfg OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.10.4.7.2.5 |
mGuardTResBladeCtrlCfgBackupReason/details for configuration backup to Blade CTRL when sending an SNMP trap.ro Enumeration .1.3.6.1.4.1.15450.2.10.4.7.2.5.1 |
mGuardTResBladeCtrlCfgRestoredReason for configuration restore from Blade CTRL when sending an SNMP trap.ro Enumeration .1.3.6.1.4.1.15450.2.10.4.7.2.5.2 |
mGuardTResRedundancy OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.10.4.8 |
mGuardTResRedundacyReasonReason for redundancy status change.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.10.4.8.1 |
mGuardTResRedundacyBackupDownInformation sent by Master device when Backup device is not reachable.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.10.4.8.2 |
mGuardTraps OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.10.5 |
mGuardTrapDiscFullStatus of file system free space. If multiple file systems, the worst state is used. TRAP-TYPE .1.3.6.1.4.1.15450.2.10.5.0.1 |
mGuardTrapCpuLoadHighCPU load above 1. TRAP-TYPE .1.3.6.1.4.1.15450.2.10.5.0.2 |
mGuardTrapMemoryFullFree memory (RAM) low. TRAP-TYPE .1.3.6.1.4.1.15450.2.10.5.0.3 |
mGuardTrapColdstartTrap sent when system rebooted (snmp daemon started). TRAP-TYPE .1.3.6.1.4.1.15450.2.10.5.0.4 |
mGuardTrapAV OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.10.6 |
mGuardTrapAvUpdateDoneAV Update was performed successfully. TRAP-TYPE .1.3.6.1.4.1.15450.2.10.6.0.1 |
mGuardTrapAvUpdateErrorError when performing AV Update. TRAP-TYPE .1.3.6.1.4.1.15450.2.10.6.0.2 |
mGuardTrapAvVirusDetectedAV found a virus. TRAP-TYPE .1.3.6.1.4.1.15450.2.10.6.0.3 |
mGuardTrapAvFileNotScannedThe file was not scanned for viruses. TRAP-TYPE .1.3.6.1.4.1.15450.2.10.6.0.4 |
mGuardTrapAvFailedGeneral AV failure. TRAP-TYPE .1.3.6.1.4.1.15450.2.10.6.0.5 |
mGuardTrapPlatformSpecific OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.10.7 |
mGuardTrapIndustrial OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.10.7.1 |
mGuardTrapIndustrialTemperatureTrap reporting temperature exceeding the given limits. TRAP-TYPE .1.3.6.1.4.1.15450.2.10.7.1.0.1 |
mGuardTrapIndustrialPowerStatusTrap sent when power supply failure was detected. TRAP-TYPE .1.3.6.1.4.1.15450.2.10.7.1.0.2 |
mGuardTrapSignalRelaisCurrent state of the signal relais changed (0=off, 1=on). TRAP-TYPE .1.3.6.1.4.1.15450.2.10.7.1.0.3 |
mGuardTrapAutoConfigAdapterStateTrap sent when ACA was accessed. TRAP-TYPE .1.3.6.1.4.1.15450.2.10.7.1.0.4 |
mGuardTrapBladeCTRL OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.10.7.2 |
mGuardTrapBladeCtrlPowerStatusBladePack's power supplies status changed. TRAP-TYPE .1.3.6.1.4.1.15450.2.10.7.2.0.2 |
mGuardTrapBladeCtrlRunStatusBlade's run status changed. TRAP-TYPE .1.3.6.1.4.1.15450.2.10.7.2.0.3 |
mGuardTrapBladeCtrlCfg OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.10.7.2.5 |
mGuardTrapBladeCtrlCfgBackupConfiguration backup to Blade CTRL is triggered. TRAP-TYPE .1.3.6.1.4.1.15450.2.10.7.2.5.0.1 |
mGuardTrapBladeCtrlCfgRestoredConfiguration restore from Blade CTRL is triggered. TRAP-TYPE .1.3.6.1.4.1.15450.2.10.7.2.5.0.2 |
mGuardTrapRouterRedundancy OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.10.8 |
mGuardTrapRouterRedundancyStatusChangeCurrent HA cluster state changed. TRAP-TYPE .1.3.6.1.4.1.15450.2.10.8.0.1 |
mGuardTrapRouterRedundancyBackupDownBackup device is not reachable by Master device (This trap is only sent, when ICMP checks are activated). TRAP-TYPE .1.3.6.1.4.1.15450.2.10.8.0.2 |
mGuardLogging OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.11 |
mGuardLoggingRemoteActivateActivate remote logging?rw Enumeration .1.3.6.1.4.1.15450.2.11.1 |
mGuardLoggingRemoteIPIP address of the remote log serverrw IpAddress .1.3.6.1.4.1.15450.2.11.2 |
mGuardLoggingRemotePortUDP port of the remote logging servicerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.11.3 |
mGuardContFilt OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.12 |
mGuardContFiltAVP OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.12.1 |
mGuardContFiltAVPScheduleThe period used when updating the antivirus databaserw Enumeration .1.3.6.1.4.1.15450.2.12.1.1 |
mGuardContFiltAVPServerTableA table of update server repositories. SEQUENCE OF MGuardContFiltAVPServerEntry .1.3.6.1.4.1.15450.2.12.1.2 |
mGuardContFiltAVPServerEntryA single update server repository. MGuardContFiltAVPServerEntry .1.3.6.1.4.1.15450.2.12.1.2.1 |
mGuardContFiltAVPServerIndexTable index. INTEGER .1.3.6.1.4.1.15450.2.12.1.2.1.1 |
mGuardContFiltAVPServerURLURL of the update server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.12.1.2.1.2 |
mGuardContFiltAVPServerRowStatusRow Statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.12.1.2.1.3 |
mGuardContFiltAVPHTTPProxy OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.12.1.3 |
mGuardContFiltAVPHTTPProxyLoginLogin for a HTTP proxy for retrival of anti-virus patterns.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.12.1.3.1 |
mGuardContFiltAVPHTTPProxyPasswdPassword for mGuardContFiltAVPHTTPProxyLogin.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.12.1.3.2 |
mGuardContFiltAVPHTTPProxyServerHostname or IP of an HTTP proxy for retrival of anti-virus patterns.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.12.1.3.3 |
mGuardContFiltAVPHTTPProxyPortPort of an HTTP proxy for retrival of anti-virus patterns, eg. 3128.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.12.1.3.4 |
mGuardContFiltAVPLogLevelAVP log detail level with 0 lowest 5 highest, defaults to 2.rw INTEGER .1.3.6.1.4.1.15450.2.12.1.5 |
mGuardContFiltAVPMaxConnectionsMaximum number of connections the AVP will handle.rw INTEGER .1.3.6.1.4.1.15450.2.12.1.6 |
mGuardContFiltAVPScanTimeoutMaximum time the protocol wrapper will wait for the scan engine in seconds.rw INTEGER .1.3.6.1.4.1.15450.2.12.1.7 |
mGuardContFiltAVPpass OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.12.1.8 |
mGuardContFiltAVPpassCorruptLet corrupt (archive) files pass, treat them as not virus infected.rw Enumeration .1.3.6.1.4.1.15450.2.12.1.8.1 |
mGuardContFiltAVPpassEncryptedLet encrypted files pass, treat them as not virus infected.rw Enumeration .1.3.6.1.4.1.15450.2.12.1.8.2 |
mGuardContFiltAVPpassSuspiciousLet suspicious files (e.g. known spyware) pass, treat them as not virus infected.rw Enumeration .1.3.6.1.4.1.15450.2.12.1.8.3 |
mGuardContFiltAVPpassWarningsLet files pass that triggered a warning, treat them as not virus infected.rw Enumeration .1.3.6.1.4.1.15450.2.12.1.8.4 |
mGuardContFiltQuarantine OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.12.1.9 |
mGuardContFiltQuarantineCleanSend clean files to quarantine server for debugging
(warning: do not violate privacy law with this option!).rw Enumeration .1.3.6.1.4.1.15450.2.12.1.9.1 |
mGuardContFiltQuarantineErrorSend files producing an error to quarantine server for debugging
(warning: do not violate privacy law with this option!).rw Enumeration .1.3.6.1.4.1.15450.2.12.1.9.2 |
mGuardContFiltQuarantineVirusSend files found to be infected to quarantine server for debugging
(warning: do not violate privacy law with this option!).rw Enumeration .1.3.6.1.4.1.15450.2.12.1.9.3 |
mGuardContFiltQuarantineSrvIPIP Address of the quarantine server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.12.1.9.4 |
mGuardContFiltQuarantineSrvPortPort used for/on the quarantine server (Innominate Quarantine Server Protocol).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.12.1.9.5 |
mGuardContFiltInfo OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.12.1.10 |
mGuardContFiltInfoFlashIDFlash ID of the device to be used for license handling.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.12.1.10.1 |
mGuardContFiltHTTP OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.12.2 |
mGuardContFiltHTTPEnableEnable HTTP procotol proxyrw Enumeration .1.3.6.1.4.1.15450.2.12.2.1 |
mGuardContFiltHTTPVirusActionAction to take on virus detectionrw Enumeration .1.3.6.1.4.1.15450.2.12.2.2 |
mGuardContFiltHTTPMaxSizeMaximum object size to be handled (actually sizes may depend on
software version and underlying hardware.rw Enumeration .1.3.6.1.4.1.15450.2.12.2.3 |
mGuardContFiltHTTPExceedActionAction to take if an object exceeds the maximum handled sizerw Enumeration .1.3.6.1.4.1.15450.2.12.2.4 |
mGuardContFiltHTTPSrvrTableA table of update server repositories. SEQUENCE OF MGuardContFiltHTTPSrvrEntry .1.3.6.1.4.1.15450.2.12.2.5 |
mGuardContFiltHTTPSrvrEntryA single update server repository. MGuardContFiltHTTPSrvrEntry .1.3.6.1.4.1.15450.2.12.2.5.1 |
mGuardContFiltHTTPSrvrIndexTable index. INTEGER .1.3.6.1.4.1.15450.2.12.2.5.1.1 |
mGuardContFiltHTTPSrvrIPIP address expression for http server(s).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.12.2.5.1.2 |
mGuardContFiltHTTPSrvrPortPort the HTTP server listens to..rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.12.2.5.1.3 |
mGuardContFiltHTTPSrvrScanActionAction to be taken when contacting respective servers.rw Enumeration .1.3.6.1.4.1.15450.2.12.2.5.1.4 |
mGuardContFiltHTTPSrvrRowStatusRow Statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.12.2.5.1.5 |
mGuardContFiltHTTPSrvrCommentComment for this rule.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.12.2.5.1.6 |
mGuardContFiltPOP3 OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.12.3 |
mGuardContFiltPOP3EnableEnable POP3 procotol proxyrw Enumeration .1.3.6.1.4.1.15450.2.12.3.1 |
mGuardContFiltPOP3VirusActionAction to take on virus detectionrw Enumeration .1.3.6.1.4.1.15450.2.12.3.2 |
mGuardContFiltPOP3MaxSizeMaximum object size to be handled (actually sizes may depend on
software version and underlying hardware.rw Enumeration .1.3.6.1.4.1.15450.2.12.3.3 |
mGuardContFiltPOP3ExceedActionAction to take if an object exceeds the maximum handled sizerw Enumeration .1.3.6.1.4.1.15450.2.12.3.4 |
mGuardContFiltPOP3SrvrTableA table of update server repositories. SEQUENCE OF MGuardContFiltPOP3SrvrEntry .1.3.6.1.4.1.15450.2.12.3.5 |
mGuardContFiltPOP3SrvrEntryA single update server repository. MGuardContFiltPOP3SrvrEntry .1.3.6.1.4.1.15450.2.12.3.5.1 |
mGuardContFiltPOP3SrvrIndexTable index. INTEGER .1.3.6.1.4.1.15450.2.12.3.5.1.1 |
mGuardContFiltPOP3SrvrIPIP address expression for pop3 server(s).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.12.3.5.1.2 |
mGuardContFiltPOP3SrvrPortPort expression for pop3 server(s).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.12.3.5.1.3 |
mGuardContFiltPOP3SrvrScanActionAction to be taken when contacting respective servers. Enumeration .1.3.6.1.4.1.15450.2.12.3.5.1.4 |
mGuardContFiltPOP3SrvrRowStatusRow Statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.12.3.5.1.5 |
mGuardContFiltPOP3SrvrCommentComment for this rule.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.12.3.5.1.6 |
mGuardContFiltSMTP OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.12.4 |
mGuardContFiltSMTPEnableEnable SMTP procotol proxyrw Enumeration .1.3.6.1.4.1.15450.2.12.4.1 |
mGuardContFiltSMTPVirusActionAction to take on virus detectionrw Enumeration .1.3.6.1.4.1.15450.2.12.4.2 |
mGuardContFiltSMTPMaxSizeMaximum object size to be handled (actually sizes may depend on
software version and underlying hardware.rw Enumeration .1.3.6.1.4.1.15450.2.12.4.3 |
mGuardContFiltSMTPExceedActionAction to take if an object exceeds the maximum handled sizerw Enumeration .1.3.6.1.4.1.15450.2.12.4.4 |
mGuardContFiltSMTPSrvrTableA table of update server repositories. SEQUENCE OF MGuardContFiltSMTPSrvrEntry .1.3.6.1.4.1.15450.2.12.4.5 |
mGuardContFiltSMTPSrvrEntryA single update server repository. MGuardContFiltSMTPSrvrEntry .1.3.6.1.4.1.15450.2.12.4.5.1 |
mGuardContFiltSMTPSrvrIndexTable index. INTEGER .1.3.6.1.4.1.15450.2.12.4.5.1.1 |
mGuardContFiltSMTPSrvrIPIP address expression for smtp server(s).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.12.4.5.1.2 |
mGuardContFiltSMTPSrvrPortPort expression for smtp server(s).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.12.4.5.1.3 |
mGuardContFiltSMTPSrvrScanActionAction to be taken when contacting respective servers. Enumeration .1.3.6.1.4.1.15450.2.12.4.5.1.4 |
mGuardContFiltSMTPSrvrRowStatusRow Statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.12.4.5.1.5 |
mGuardContFiltSMTPSrvrCommentComment for this rule.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.12.4.5.1.6 |
mGuardContFiltFTP OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.12.5 |
mGuardContFiltFTPEnableEnable FTP procotol proxyrw Enumeration .1.3.6.1.4.1.15450.2.12.5.1 |
mGuardContFiltFTPVirusActionAction to take on virus detectionrw Enumeration .1.3.6.1.4.1.15450.2.12.5.2 |
mGuardContFiltFTPMaxSizeMaximum object size to be handled (actually sizes may depend on
software version and underlying hardware.rw Enumeration .1.3.6.1.4.1.15450.2.12.5.3 |
mGuardContFiltFTPExceedActionAction to take if an object exceeds the maximum handled sizerw Enumeration .1.3.6.1.4.1.15450.2.12.5.4 |
mGuardContFiltFTPSrvrTableA table of update server repositories. SEQUENCE OF MGuardContFiltFTPSrvrEntry .1.3.6.1.4.1.15450.2.12.5.5 |
mGuardContFiltFTPSrvrEntryA single update server repository. MGuardContFiltFTPSrvrEntry .1.3.6.1.4.1.15450.2.12.5.5.1 |
mGuardContFiltFTPSrvrIndexTable index. INTEGER .1.3.6.1.4.1.15450.2.12.5.5.1.1 |
mGuardContFiltFTPSrvrIPIP address expression for smtp server(s).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.12.5.5.1.2 |
mGuardContFiltFTPSrvrPortPort expression for smtp server(s).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.12.5.5.1.3 |
mGuardContFiltFTPSrvrScanActionAction to be taken when contacting respective servers. Enumeration .1.3.6.1.4.1.15450.2.12.5.5.1.4 |
mGuardContFiltFTPSrvrRowStatusRow Statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.12.5.5.1.5 |
mGuardContFiltFTPSrvrCommentComment for this rule.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.12.5.5.1.6 |
mGuardBlade OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.13 |
mGuardBladeRackIDBlade rack ID, read-only on a blade, read-write on a controllerrw INTEGER .1.3.6.1.4.1.15450.2.13.1 |
mGuardBladeSlotIDBlade slot ID, slot ID in a mGuard Rack INTEGER .1.3.6.1.4.1.15450.2.13.2 |
mGuardBladeCtrlTableOverview of controlled blades. SEQUENCE OF MGuardBladeCtrlEntry .1.3.6.1.4.1.15450.2.13.3 |
mGuardBladeCtrlEntryA single update server repository. MGuardBladeCtrlEntry .1.3.6.1.4.1.15450.2.13.3.1 |
mGuardBladeCtrlIndexTable index. INTEGER .1.3.6.1.4.1.15450.2.13.3.1.1 |
mGuardBladeCtrlDeviceThe name of the device inside the slot.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.13.3.1.2 |
mGuardBladeCtrlStatusThe status of the blade/slot.ro Enumeration .1.3.6.1.4.1.15450.2.13.3.1.3 |
mGuardBladeCtrlAVRRevisionThe AVR revision of the blades bus controller.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.13.3.1.4 |
mGuardBladeCtrlSlotIDThe blades slot ID, as seen by the blade.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.13.3.1.5 |
mGuardBladeCtrlProductIDThe blades product ID.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.13.3.1.6 |
mGuardBladeCtrlAssemblyIDThe blades assembly ID.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.13.3.1.7 |
mGuardBladeCtrlSerialThe blades serial number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.13.3.1.8 |
mGuardBladeCtrlFlashIDThe blades Flash ID.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.13.3.1.9 |
mGuardBladeCtrlVersionThe blades software version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.13.3.1.10 |
mGuardBladeCtrlBackupWether to automatically pull the configuration off the blade/slot.rw Enumeration .1.3.6.1.4.1.15450.2.13.3.1.11 |
mGuardBladeCtrlRestoreWether to automatically push the configuration to the blade freshly inserted into the slot.rw Enumeration .1.3.6.1.4.1.15450.2.13.3.1.12 |
mGuardBladePwrTableOverview of controlled power supplies. SEQUENCE OF MGuardBladePwrEntry .1.3.6.1.4.1.15450.2.13.4 |
mGuardBladePwrEntryTable entry. MGuardBladePwrEntry .1.3.6.1.4.1.15450.2.13.4.1 |
mGuardBladePwrIndexTable index. INTEGER .1.3.6.1.4.1.15450.2.13.4.1.1 |
mGuardBladePwrStatusStatus of the power supply.ro Enumeration .1.3.6.1.4.1.15450.2.13.4.1.2 |
mGuardProfile OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.14 |
mGuardProfilePush OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.14.1 |
mGuardProfilePull OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.14.2 |
mGuardProfilePullScheduleThe period used when polling remote configuration profiles.rw Enumeration .1.3.6.1.4.1.15450.2.14.2.1 |
mGuardProfilePullHTTPS OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.14.2.2 |
mGuardProfilePullHTTPSCertX.509 Certificate of the HTTPS server to pull configuration profiles
from. This used to authenticate the HTTPS server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.14.2.2.1 |
mGuardProfilePullHTTPSServerHostname or IP of the HTTPS server to pull configuration profiles
from.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.14.2.2.2 |
mGuardProfilePullHTTPSPortPort of the HTTPS server to pull configuration profiles from.
Usually 443.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.14.2.2.3 |
mGuardProfilePullHTTPSFileFilename of the configuration to pull. Default is an empty name, in
which case the serialnumber with the extension '.atv' is used.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.14.2.2.4 |
mGuardProfilePullHTTPSLoginLogin on the HTTPS server to pull configuration profiles from.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.14.2.2.5 |
mGuardProfilePullHTTPSPasswdPassword on the HTTPS server to pull configuration profiles from.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.14.2.2.6 |
mGuardProfilePullHTTPSDirectoryDirectory on the HTTPS server to pull configuration profiles from.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.14.2.2.7 |
mGuardUsers OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.15 |
mGuardRemoteUsers OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.15.1 |
mGuardRADIUS OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.15.1.1 |
mGuardRADIUSTimeoutTime to wait before deciding that a RADIUS server has not responded to a request.rw INTEGER .1.3.6.1.4.1.15450.2.15.1.1.1 |
mGuardRADIUSRetriesThe number of packets of sent to a RADIUS server before giving up.rw INTEGER .1.3.6.1.4.1.15450.2.15.1.1.2 |
mGuardRADIUSServerTableA table containing RADIUS servers. SEQUENCE OF MGuardRADIUSServerEntry .1.3.6.1.4.1.15450.2.15.1.1.3 |
mGuardRADIUSServerEntryAn entry containing a single RADIUS server. MGuardRADIUSServerEntry .1.3.6.1.4.1.15450.2.15.1.1.3.1 |
mGuardRADIUSServerIndexIndex to identify RADIUS server entry. INTEGER .1.3.6.1.4.1.15450.2.15.1.1.3.1.1 |
mGuardRADIUSServerHostnameThe hostname or IP address of the RADIUS server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.15.1.1.3.1.2 |
mGuardRADIUSServerPortThe port number of the RADIUS server.rw INTEGER .1.3.6.1.4.1.15450.2.15.1.1.3.1.3 |
mGuardRADIUSServerSecretThe secret shared with the RADIUS server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.15.1.1.3.1.4 |
mGuardRADIUSServerRowStatusRow Statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.15.1.1.3.1.5 |
mGuardUserFWUsers OBJECT IDENTIFIER .1.3.6.1.4.1.15450.2.15.1.2 |
mGuardUserFWUserTableA table containing user firewall users. SEQUENCE OF MGuardUserFWUserEntry .1.3.6.1.4.1.15450.2.15.1.2.1 |
mGuardUserFWUserEntryAn entry containing a single user firewall user. MGuardUserFWUserEntry .1.3.6.1.4.1.15450.2.15.1.2.1.1 |
mGuardUserFWUserIndexIndex to identify the user firewall user entry. INTEGER .1.3.6.1.4.1.15450.2.15.1.2.1.1.1 |
mGuardUserFWUserNameThe username of the user firewall user entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.15.1.2.1.1.2 |
mGuardUserFWUserAuthMethodThe authentication method of the user firewall user entry.rw Enumeration .1.3.6.1.4.1.15450.2.15.1.2.1.1.3 |
mGuardUserFWUserPasswordThe password of the user firewall user entry. The password can be set, but not obtained.
If the variable is read, a * character is returned.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15450.2.15.1.2.1.1.4 |
mGuardUserFWUserRowStatusRow Statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15450.2.15.1.2.1.1.5 |