INNOMINATE-LLDP-MIB
This MIB contains the proprietary extensions to the LLDP standard.
Main OID:
innominateLldpMIB.1.3.6.1.4.1.15450.3.7
20
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
20 total| Object Name |
|---|
innominateLldpMIBThis MIB contains the proprietary extensions to the LLDP standard. MODULE-IDENTITY .1.3.6.1.4.1.15450.3.7 |
innominateLLDPConfig OBJECT IDENTIFIER .1.3.6.1.4.1.15450.3.7.1 |
innominateLLDPAdminStatusDURABLE: Enables/disables the IEEE802.1AB functionality on this device. If disabled(2), the LLDP protocol is inactive, but the LLDP MIBs can be accessed.rw Enumeration .1.3.6.1.4.1.15450.3.7.1.1 |
innominateLLDPInterfaceTableThis table contains variables for each interface of the switch. SEQUENCE OF InnominateLLDPIfEntry .1.3.6.1.4.1.15450.3.7.1.2 |
innominateLLDPIfEntry InnominateLLDPIfEntry .1.3.6.1.4.1.15450.3.7.1.2.1 |
innominateLLDPIfaceGroupIDIndex to identify an interface card. This value is never greater than innominateSysGroupCapacity.ro INTEGER .1.3.6.1.4.1.15450.3.7.1.2.1.1 |
innominateLLDPIfaceIDIndex to identify an interface within an interface card.ro INTEGER .1.3.6.1.4.1.15450.3.7.1.2.1.2 |
innominateLLDPIfaceHirmaModeConfigure Hirschmann LLDP on this physical port. If an IEEE802.1AB capable device not manufactured by Hirschmann is connected to a port, innominateLLDPIfaceHirmaMode should be set to disabled (4) for this port.rw Enumeration .1.3.6.1.4.1.15450.3.7.1.2.1.3 |
innominateLLDPIfaceFDBModeIf configured to lldpOnly(1), only received LLDP messages will be used to populate the LLDP-MIB's remTable. If configured to macOnly(2), learned mac addresses out of the switch's forwarding database (FDB) will be used to populate the LLDP-MIB's remTable. If configured to both(3), both received LLDP messages and learned mac addresses out of the switch's forwarding database (FDB) will be used to populate the LLDP-MIB's remTable. If configured to autoDetect(4) and LLDP messages are received on this port, this mode will behave like lldpOnly(1), otherwise it will behave like macOnly(2).rw Enumeration .1.3.6.1.4.1.15450.3.7.1.2.1.4 |
innominateLLDPIfaceMaxNeighborsConfigure Hirschmann LLDP on this physical port. This value limits the number of entries in the remTable for this port.rw INTEGER .1.3.6.1.4.1.15450.3.7.1.2.1.5 |
innominateLLDPStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.15450.3.7.2 |
innominateLLDPStatsIfTableThis table contains variables for each interface of the switch. SEQUENCE OF InnominateLLDPStatsIfEntry .1.3.6.1.4.1.15450.3.7.2.1 |
innominateLLDPStatsIfEntry InnominateLLDPStatsIfEntry .1.3.6.1.4.1.15450.3.7.2.1.1 |
innominateLLDPStatsIfaceGroupIDIndex to identify an interface card. This value is never greater than innominateSysGroupCapacity.ro INTEGER .1.3.6.1.4.1.15450.3.7.2.1.1.1 |
innominateLLDPStatsIfaceIDIndex to identify an interface within an interface card.ro INTEGER .1.3.6.1.4.1.15450.3.7.2.1.1.2 |
innominateLLDPStatsIfaceTotalFDBEntryCountThe total number of learned entries in the forwarding database (FDB) for this port.ro Counter32 .1.3.6.1.4.1.15450.3.7.2.1.1.3 |
innominateLLDPStatsIfaceTotalEntryCountThe total number of remote connections in the LLDP MIB's remTable for this port.ro Counter32 .1.3.6.1.4.1.15450.3.7.2.1.1.4 |
innominateLLDPStatsIfaceIEEEEntryCountThe number of remote connections in the LLDP MIB's remTable for this port that were detected because an LLDP message from an IEEE source was received.ro Counter32 .1.3.6.1.4.1.15450.3.7.2.1.1.5 |
innominateLLDPStatsIfaceHirmaEntryCountThe number of remote connections in the LLDP MIB's remTable for this port that were detected because an LLDP message from an Hirschmann source was received.ro Counter32 .1.3.6.1.4.1.15450.3.7.2.1.1.6 |
innominateLLDPStatsIfaceFDBEntryCountThe number of remote connections in the LLDP MIB's remTable for this port that were detected in the forwarding database (FDB) for this port.ro Counter32 .1.3.6.1.4.1.15450.3.7.2.1.1.7 |