METRO1500-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
222
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
222 total| Object Name |
|---|
org OBJECT IDENTIFIER .1.3 |
IMPORTS Unknown .1.3 |
dod OBJECT IDENTIFIER .1.3.6 |
internet OBJECT IDENTIFIER .1.3.6.1 |
private OBJECT IDENTIFIER .1.3.6.1.4 |
enterprises OBJECT IDENTIFIER .1.3.6.1.4.1 |
adva OBJECT IDENTIFIER .1.3.6.1.4.1.2544 |
advaProducts OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1 |
metro1500 OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.3 |
metro1500Main OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.3.1 |
metro1500Housing OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.3.1.1 |
metro1500ManufacturerManufacturer of the METRO1500 Systemro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.3.1.1.1 |
metro1500MainTypeType of the METRO1500 Systemro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.3.1.1.2 |
metro1500MainSerialNumberSerial Number of the METRO1500 Systemro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.3.1.1.3 |
metro1500MainHardwareVersionHardware Version of the METRO1500 Systemro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.3.1.1.4 |
metro1500MainSoftwareVersionSoftware Version of the METRO1500 System (Device Master).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.3.1.1.5 |
metro1500MainBusMessagesNumber of received internal Messages. This Number gives
Information on the internal Activity of the METRO1500
System. This should be a large integer Number except when the
System has just started. The Value is updated every five
Seconds.ro INTEGER .1.3.6.1.4.1.2544.1.3.1.1.6 |
metro1500MainBusErrorsNumber of dropped received internal Messages. This value
should be 0 or a very small Integer.ro INTEGER .1.3.6.1.4.1.2544.1.3.1.1.7 |
metro1500MainLastEventSince SNMP Traps are not reliable, this Number can be polled
periodically. The Value is set to a nonzero Integer when an
Event occurs and cleared ten Minutes after the last Event.ro INTEGER .1.3.6.1.4.1.2544.1.3.1.1.8 |
metro1500MainMotdMessage Of The Day is the greeting when login via telnet. It
shows the actual Kernel Version and the Software Update
State. With the MOTD you get Information on the actual
installed Software Packets.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.3.1.1.9 |
metro1500MainTrapsinkTableTable of Trapsinks SEQUENCE OF Metro1500MainTrapsinkEntry .1.3.6.1.4.1.2544.1.3.1.1.10 |
metro1500MainTrapsinkEntryEntries in the Trapsink Table Metro1500MainTrapsinkEntry .1.3.6.1.4.1.2544.1.3.1.1.10.1 |
metro1500MainTrapsinkNumberNumber of Trapsinkro INTEGER .1.3.6.1.4.1.2544.1.3.1.1.10.1.1 |
metro1500MainTrapsinkAddressIP Address of the Management System which should receive SNMP
Traps. The Logfiles are also shown in this Tablero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.3.1.1.10.1.2 |
metro1500MainTrapsinkCommunityCommunity String which is sent with a SNMP Trap to the
Management Stationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.3.1.1.10.1.3 |
metro1500MainTrapsinkPriorityPriority of the Trapsink (lower level gets less Traps)ro INTEGER .1.3.6.1.4.1.2544.1.3.1.1.10.1.4 |
metro1500MainLogfileTableTable of Log Files SEQUENCE OF Metro1500MainLogfileEntry .1.3.6.1.4.1.2544.1.3.1.1.11 |
metro1500MainLogfileEntryEntries in the Logfile Table Metro1500MainLogfileEntry .1.3.6.1.4.1.2544.1.3.1.1.11.1 |
metro1500MainLogfileNumberNumber of Logfilero INTEGER .1.3.6.1.4.1.2544.1.3.1.1.11.1.1 |
metro1500MainLogfileNameName of Logfilero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.3.1.1.11.1.2 |
metro1500MainLogfileSizeSize of Logfilero INTEGER .1.3.6.1.4.1.2544.1.3.1.1.11.1.3 |
metro1500MainLogfilePriorityPriority of Logfilero INTEGER .1.3.6.1.4.1.2544.1.3.1.1.11.1.4 |
metro1500SlotTableTable of installed METRO1500 Components. Since METRO1500 can
handle many different Components, in this Section only the
common Information is displayed. Component specific
Information is stored in different Subtrees. SEQUENCE OF Metro1500SlotEntry .1.3.6.1.4.1.2544.1.3.1.2 |
metro1500SlotEntryInstalled METRO1500 Components Metro1500SlotEntry .1.3.6.1.4.1.2544.1.3.1.2.1 |
metro1500SlotNumberSlot Number of installed Component. The Device
Master has always Slot Number 0 and is shown in the
Main section.ro INTEGER .1.3.6.1.4.1.2544.1.3.1.2.1.1 |
metro1500TypeType of installed Componentro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.3.1.2.1.2 |
metro1500SlotTypeNumberInteger Number between 0 and 255 unique for a
specific type of installed Component. This
Number can be used for management Systems to
handle automatically the different Options
of installed Components.ro Enumeration .1.3.6.1.4.1.2544.1.3.1.2.1.3 |
metro1500SerialNumberSerial Number of installed Componentro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.3.1.2.1.4 |
metro1500HardwareVersionHardware Version of installed Componentro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.3.1.2.1.5 |
metro1500SoftwareVersionSoftwareVersion of installed Componentro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.3.1.2.1.6 |
metro1500TemperatureTemperature of installed Component in
Celsiusro INTEGER .1.3.6.1.4.1.2544.1.3.1.2.1.7 |
metro1500BoardVoltageVoltage measured directly on the board in mVro INTEGER .1.3.6.1.4.1.2544.1.3.1.2.1.8 |
metro1500DetailInfoA Reference to the MIB Definition where the special
Options of the Component are described with more Detailsro OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.3.1.2.1.9 |
metro1500EPLDVersionSoftware Version on the programmable Logic Circuitro INTEGER .1.3.6.1.4.1.2544.1.3.1.2.1.10 |
metro1500PSTableTable of installed Power Supplies SEQUENCE OF Metro1500PSEntry .1.3.6.1.4.1.2544.1.3.1.3 |
metro1500PSEntryInstalled METRO1500 Power Supplies Metro1500PSEntry .1.3.6.1.4.1.2544.1.3.1.3.1 |
metro1500PSNumberNumber of installed Power Supplyro INTEGER .1.3.6.1.4.1.2544.1.3.1.3.1.1 |
metro1500PSOnIs installed Power Supply On or Offro Enumeration .1.3.6.1.4.1.2544.1.3.1.3.1.2 |
metro1500FanTableTable of installed Fans SEQUENCE OF Metro1500FanEntry .1.3.6.1.4.1.2544.1.3.1.4 |
metro1500FanEntryInstalled METRO1500 Fans Metro1500FanEntry .1.3.6.1.4.1.2544.1.3.1.4.1 |
metro1500FanNumberNumber of installed Fanro INTEGER .1.3.6.1.4.1.2544.1.3.1.4.1.1 |
metro1500FanOnIs installed Fan On or Offro Enumeration .1.3.6.1.4.1.2544.1.3.1.4.1.2 |
metro1500Converter OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.3.5 |
metro1500ConverterTableTable of installed METRO1500 Converters SEQUENCE OF Metro1500ConverterEntry .1.3.6.1.4.1.2544.1.3.5.1 |
metro1500ConverterEntryInstalled METRO1500 Converters Metro1500ConverterEntry .1.3.6.1.4.1.2544.1.3.5.1.1 |
metro1500ConverterNumberSlot Number of installed Converter Cardro INTEGER .1.3.6.1.4.1.2544.1.3.5.1.1.1 |
metro1500RxLocLocal Receiver has Signal (On) or Loss
of Signal (Off)ro Enumeration .1.3.6.1.4.1.2544.1.3.5.1.1.2 |
metro1500TxLocLocal Transmitter is On or Offro Enumeration .1.3.6.1.4.1.2544.1.3.5.1.1.3 |
metro1500TxLocCCurrent of the local Transmitter in mA.
This Entry is only available if a Current Sensor is
installedro INTEGER .1.3.6.1.4.1.2544.1.3.5.1.1.4 |
metro1500TxLocTempTemperature of the local Transmitter in Celsius.
This Entry is only available if the Laser is cooledro INTEGER (-50..100) .1.3.6.1.4.1.2544.1.3.5.1.1.5 |
metro1500RxRemRemote Receiver has Signal (On) or Loss
of Signal (Off)ro Enumeration .1.3.6.1.4.1.2544.1.3.5.1.1.6 |
metro1500TxRemRemote Transmitter is On or Offro Enumeration .1.3.6.1.4.1.2544.1.3.5.1.1.7 |
metro1500TxRemCCurrent of the Remote Transmitter in Milli Ampere.
This Entry is only available if a Current Sensor is
installedro INTEGER .1.3.6.1.4.1.2544.1.3.5.1.1.8 |
metro1500TxRemTempTemperature of the Remote Transmitter in Celsius
This Entry is only available if the Laser is cooledro INTEGER (-50..100) .1.3.6.1.4.1.2544.1.3.5.1.1.9 |
metro1500RxRem22nd Remote receiver has Signal (On) or Loss
of Signal (Off).
(Only available if a 2nd Remote Receiver is
installed)ro Enumeration .1.3.6.1.4.1.2544.1.3.5.1.1.10 |
metro1500ClockStateStatus of the Clock. This Entry is only available
if a Clock is installed. If the Clock is enabled,
and has an error output, and cannot synchronize to
the Signal, the Clock fails.ro Enumeration .1.3.6.1.4.1.2544.1.3.5.1.1.11 |
metro1500ClockFreqFrequency of the Clock in MBit/s. Only available if
a Clock is installed.ro INTEGER .1.3.6.1.4.1.2544.1.3.5.1.1.12 |
metro1500LocLoopLocal Loop is set to On or to Offro Enumeration .1.3.6.1.4.1.2544.1.3.5.1.1.13 |
metro1500RemLoopRemote Loop is set to On or to Offro Enumeration .1.3.6.1.4.1.2544.1.3.5.1.1.14 |
metro1500ClockTypeType of the Clock. Only available, if a Clock is installed.ro Enumeration .1.3.6.1.4.1.2544.1.3.5.1.1.15 |
metro1500Switch OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.3.10 |
metro1500SwitchTableTable of installed METRO1500 Switches SEQUENCE OF Metro1500SwitchEntry .1.3.6.1.4.1.2544.1.3.10.1 |
metro1500SwitchEntryInstalled METRO1500 Switches Metro1500SwitchEntry .1.3.6.1.4.1.2544.1.3.10.1.1 |
metro1500SwitchNumberSlot Number of installed Remote Optical Switch Cardro INTEGER .1.3.6.1.4.1.2544.1.3.10.1.1.1 |
metro1500SwitchLineActive Line of Remote Optical Switchro Enumeration .1.3.6.1.4.1.2544.1.3.10.1.1.2 |
metro1500SwitchModeMode of Transmit Line of Remote Optical Switchro Enumeration .1.3.6.1.4.1.2544.1.3.10.1.1.3 |
metro1500SwitchLaserOnShows if the reference Laser is On or Offro Enumeration .1.3.6.1.4.1.2544.1.3.10.1.1.4 |
metro1500SwitchLineAavailIs Line A of Remote Optical Switch available?ro Enumeration .1.3.6.1.4.1.2544.1.3.10.1.1.5 |
metro1500SwitchLineBavailIs Line B of Remote Optical Switch availablero Enumeration .1.3.6.1.4.1.2544.1.3.10.1.1.6 |
metro1500EthernetHub OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.3.14 |
metro1500EthernetHubTableTable of installed FSP-II Hub Cards SEQUENCE OF Metro1500EthernetHubEntry .1.3.6.1.4.1.2544.1.3.14.1 |
metro1500EthernetHubEntryInstalled FSP-II Hub Cards Metro1500EthernetHubEntry .1.3.6.1.4.1.2544.1.3.14.1.1 |
metro1500EthernetHubNumberSlot Number of installed Hub Cardro INTEGER .1.3.6.1.4.1.2544.1.3.14.1.1.1 |
metro1500EthernetHubPortEnable1is Hub Port 1 enabled ?ro Enumeration .1.3.6.1.4.1.2544.1.3.14.1.1.10 |
metro1500EthernetHubPortPartitionStatus1is Port 1 partitioned ?ro Enumeration .1.3.6.1.4.1.2544.1.3.14.1.1.11 |
metro1500EthernetHubPortLinkStatus1does Port 1 receive Link Pulses ?ro Enumeration .1.3.6.1.4.1.2544.1.3.14.1.1.12 |
metro1500EthernetHubPortPolarity1polarity of input signal at Port 1ro Enumeration .1.3.6.1.4.1.2544.1.3.14.1.1.13 |
metro1500EthernetHubPortEnable2is Hub Port 2 enabled ?ro Enumeration .1.3.6.1.4.1.2544.1.3.14.1.1.20 |
metro1500EthernetHubPortPartitionStatus2is Port 2 partitioned ?ro Enumeration .1.3.6.1.4.1.2544.1.3.14.1.1.21 |
metro1500EthernetHubPortLinkStatus2does Port 2 receive Link Pulses ?ro Enumeration .1.3.6.1.4.1.2544.1.3.14.1.1.22 |
metro1500EthernetHubPortPolarity2polarity of input signal at Port 2ro Enumeration .1.3.6.1.4.1.2544.1.3.14.1.1.23 |
metro1500EthernetHubPortEnable3is Hub Port 3 enabled ?ro Enumeration .1.3.6.1.4.1.2544.1.3.14.1.1.30 |
metro1500EthernetHubPortPartitionStatus3is Port 3 partitioned ?ro Enumeration .1.3.6.1.4.1.2544.1.3.14.1.1.31 |
metro1500EthernetHubPortLinkStatus3does Port 3 receive Link Pulses ?ro Enumeration .1.3.6.1.4.1.2544.1.3.14.1.1.32 |
metro1500EthernetHubPortPolarity3polarity of input signal at Port 3ro Enumeration .1.3.6.1.4.1.2544.1.3.14.1.1.33 |
metro1500EthernetHubPortEnable4is Hub Port 4 enabled ?ro Enumeration .1.3.6.1.4.1.2544.1.3.14.1.1.40 |
metro1500EthernetHubPortPartitionStatus4is Port 4 partitioned ?ro Enumeration .1.3.6.1.4.1.2544.1.3.14.1.1.41 |
metro1500EthernetHubPortLinkStatus4does Port 4 receive Link Pulses ?ro Enumeration .1.3.6.1.4.1.2544.1.3.14.1.1.42 |
metro1500EthernetHubPortPolarity4polarity of input signal at Port 4ro Enumeration .1.3.6.1.4.1.2544.1.3.14.1.1.43 |
metro1500EthernetHubPortEnable5is Hub Port 5 enabled ?ro Enumeration .1.3.6.1.4.1.2544.1.3.14.1.1.50 |
metro1500EthernetHubPortPartitionStatus5is Port 5 partitioned ?ro Enumeration .1.3.6.1.4.1.2544.1.3.14.1.1.51 |
metro1500EthernetHubPortLinkStatus5does Port 5 receive Link Pulses ?ro Enumeration .1.3.6.1.4.1.2544.1.3.14.1.1.52 |
metro1500EthernetHubPortPolarity5polarity of input signal at Port 5ro Enumeration .1.3.6.1.4.1.2544.1.3.14.1.1.53 |
metro1500TDM OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.3.15 |
metro1500TDMTableTable of installed FSP-II TDM Cards SEQUENCE OF Metro1500TDMEntry .1.3.6.1.4.1.2544.1.3.15.1 |
metro1500TDMEntryInstalled FSP-II TDM Cards Metro1500TDMEntry .1.3.6.1.4.1.2544.1.3.15.1.1 |
metro1500TDMNumberSlot Number of installed TDM Cardro INTEGER .1.3.6.1.4.1.2544.1.3.15.1.1.1 |
metro1500TDMRxRemDoes the remote receiver receive Light (on) or not
(off)?ro Enumeration .1.3.6.1.4.1.2544.1.3.15.1.1.4 |
metro1500TDMRxSyncIs the input signal synchronized with the corresponding
TDM card?ro Enumeration .1.3.6.1.4.1.2544.1.3.15.1.1.5 |
metro1500TDMTxRemState of the Remote Transmitterro Enumeration .1.3.6.1.4.1.2544.1.3.15.1.1.6 |
metro1500TDMTxRemCCurrent of the remote Transmitter in mAro INTEGER .1.3.6.1.4.1.2544.1.3.15.1.1.7 |
metro1500TDMTxRemTempTemperature of the remote Transmitter in Celsiusro INTEGER (-50..100) .1.3.6.1.4.1.2544.1.3.15.1.1.8 |
metro1500TDMLocLoopLoop for all Local Inputs enabled (on) or disabled (off)ro Enumeration .1.3.6.1.4.1.2544.1.3.15.1.1.9 |
metro1500TDMLocModuleInst1is local Module 1 installed ?ro Enumeration .1.3.6.1.4.1.2544.1.3.15.1.1.20 |
metro1500TDMLocModuleEnable1is local Module 1 enabled ?ro Enumeration .1.3.6.1.4.1.2544.1.3.15.1.1.21 |
metro1500TDMLocModuleRx1local receiver 1 gets signal (on)ro Enumeration .1.3.6.1.4.1.2544.1.3.15.1.1.22 |
metro1500TDMLocModuleTx1state of the local transmitterro Enumeration .1.3.6.1.4.1.2544.1.3.15.1.1.23 |
metro1500TDMLocModuleRemoteData1receiving data for this module from the remote sidero Enumeration .1.3.6.1.4.1.2544.1.3.15.1.1.24 |
metro1500TDMLocModuleClockFrequency1data rate of the clock installed on local Module 1
in MBit/sro INTEGER .1.3.6.1.4.1.2544.1.3.15.1.1.25 |
metro1500TDMLocModuleClockError1data rate and clock frequency are not synchronizedro Enumeration .1.3.6.1.4.1.2544.1.3.15.1.1.26 |
metro1500TDMLocModuleInst2is local Module 2 installed ?ro Enumeration .1.3.6.1.4.1.2544.1.3.15.1.1.30 |
metro1500TDMLocModuleEnable2is local Module 2 enabled ?ro Enumeration .1.3.6.1.4.1.2544.1.3.15.1.1.31 |
metro1500TDMLocModuleRx2local receiver 2 gets signal (on)ro Enumeration .1.3.6.1.4.1.2544.1.3.15.1.1.32 |
metro1500TDMLocModuleTx2state of the local transmitterro Enumeration .1.3.6.1.4.1.2544.1.3.15.1.1.33 |
metro1500TDMLocModuleRemoteData2receiving data for this module from the remote sidero Enumeration .1.3.6.1.4.1.2544.1.3.15.1.1.34 |
metro1500TDMLocModuleClockFrequency2data rate of the clock installed on local Module 2
in MBit/sro INTEGER .1.3.6.1.4.1.2544.1.3.15.1.1.35 |
metro1500TDMLocModuleClockError2data rate and clock frequency are not synchronizedro Enumeration .1.3.6.1.4.1.2544.1.3.15.1.1.36 |
metro1500TDMLocModuleInst3is local Module 3 installed ?ro Enumeration .1.3.6.1.4.1.2544.1.3.15.1.1.40 |
metro1500TDMLocModuleEnable3is local Module 3 enabled ?ro Enumeration .1.3.6.1.4.1.2544.1.3.15.1.1.41 |
metro1500TDMLocModuleRx3local receiver 3 gets signal (on)ro Enumeration .1.3.6.1.4.1.2544.1.3.15.1.1.42 |
metro1500TDMLocModuleTx3state of the local transmitterro Enumeration .1.3.6.1.4.1.2544.1.3.15.1.1.43 |
metro1500TDMLocModuleRemoteData3receiving data for this module from the remote sidero Enumeration .1.3.6.1.4.1.2544.1.3.15.1.1.44 |
metro1500TDMLocModuleClockFrequency3data rate of the clock installed on local Module 3
in MBit/sro INTEGER .1.3.6.1.4.1.2544.1.3.15.1.1.45 |
metro1500TDMLocModuleClockError3data rate and clock frequency are not synchronizedro Enumeration .1.3.6.1.4.1.2544.1.3.15.1.1.46 |
metro1500TDMLocModuleInst4is local Module 4 installed ?ro Enumeration .1.3.6.1.4.1.2544.1.3.15.1.1.50 |
metro1500TDMLocModuleEnable4is local Module 4 enabled ?ro Enumeration .1.3.6.1.4.1.2544.1.3.15.1.1.51 |
metro1500TDMLocModuleRx4local receiver 4 gets signal (on)ro Enumeration .1.3.6.1.4.1.2544.1.3.15.1.1.52 |
metro1500TDMLocModuleTx4state of the local transmitterro Enumeration .1.3.6.1.4.1.2544.1.3.15.1.1.53 |
metro1500TDMLocModuleRemoteData4receiving data for this module from the remote sidero Enumeration .1.3.6.1.4.1.2544.1.3.15.1.1.54 |
metro1500TDMLocModuleClockFrequency4data rate of the clock installed on local Module 4
in MBit/sro INTEGER .1.3.6.1.4.1.2544.1.3.15.1.1.55 |
metro1500TDMLocModuleClockError4data rate and clock frequency are not synchronizedro Enumeration .1.3.6.1.4.1.2544.1.3.15.1.1.56 |
metro1500Trap OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.3.100 |
metro1500HardwareAddedTrap is sent when a new Module is inserted
into the FSP-I Box TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.1 |
metro1500HardwareDeletedTrap is sent when a Module is removed
from the FSP-I Box TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.2 |
metro1500PSNotFailTrap is sent when a Power Supply
starts working TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.3 |
metro1500PSFailTrap is sent when a Power Supply fails TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.4 |
metro1500FanNotFailTrap is sent when a Fan starts working TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.5 |
metro1500FanFailTrap is sent when a Fan fails TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.6 |
metro1500BusNotFailTrap is sent when the internal Bus starts
working again TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.7 |
metro1500BusFailTrap is sent when an internal Bus Failure occurs TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.8 |
metro1500RxLocOnTrap is sent when the local Receiver gets Signal TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.20 |
metro1500RxLocOffTrap is sent when the local Receiver has Loss of Signal TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.21 |
metro1500TxLocOnTrap is sent when the local Transmitter is switched on,
Either this trap or Trap #20 should be disabled in the
Configuration because they are typically sent at the same Time. TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.22 |
metro1500TxLocOffTrap is sent when the local Transmitter is switched off,
Either this trap or Trap #21 should be disabled in the
Configuration because they are typically sent at the same Time. TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.23 |
metro1500RxRemOnTrap is sent when the remote Receiver gets Signal TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.24 |
metro1500RxRemOffTrap is sent when the remote Receiver has Loss of Signal TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.25 |
metro1500TxRemOnTrap is sent when the remote Transmitter is switched on,
Either this trap or Trap #24 should be disabled in the
Configuration because they are typically sent at the same Time. TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.26 |
metro1500TxRemOffTrap is sent when the remote Transmitter is switched off,
Either this trap or Trap #25 should be disabled in the
Configuration because they are typically sent at the same Time. TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.27 |
metro1500RxRem2OnTrap is sent when the 2nd remote Receiver gets Signal.
This Trap is only sent if there is a 2nd remote Receiver. TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.28 |
metro1500RxRem2OffTrap is sent when the 2nd remote Receiver has Loss of Signal.
This Trap is only sent if there is a 2nd remote Receiver. TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.29 |
metro1500TxRem2OnTrap is sent when the 2nd remote Transmitter is switched on,
Either this Trap or Trap #28 should be disabled in the
Configuration because they are typically sent at the same Time.
This Trap is only sent if there is a 2nd remote Receiver. TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.30 |
metro1500TxRem2OffTrap is sent when the 2nd remote Transmitter is switched off,
Either this trap or Trap #29 should be disabled in the
Configuration because they are typically sent at the same Time. TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.31 |
metro1500ClockNoFailTrap is sent if a Clock is installed and can
synchronize with the input Signal. This Trap is not sent
if the installed Clock does not have an error Output TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.32 |
metro1500ClockFailTrap is sent if a Clock is installed and can not
synchronize with the input Signal. This trap is not sent
if the installed Clock does not have an error Output TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.33 |
metro1500ClockChangeFrequencyTrap is sent if a multi frequency Clock is installed and
changes its frequency. TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.34 |
metro1500LocLoopOnTrap is sent if Local Loop is set to On. TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.35 |
metro1500LocLoopOffTrap is sent if Local Loop is set to Off. TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.36 |
metro1500RemLoopOnTrap is sent if Remote Loop is set to On. TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.37 |
metro1500RemLoopOffTrap is sent if Remote Loop is set to Off. TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.38 |
metro1500switchReferenceLaserOnTrap is sent when the Reference Laser is switched on TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.40 |
metro1500switchReferenceLaserOffTrap is sent when the Reference Laser is switched off TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.41 |
metro1500switchToATrap is sent when the Switch switches to Line A TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.42 |
metro1500switchToBTrap is sent when the Switch switches to Line B TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.43 |
metro1500switchAutomaticTrap is sent when the Switch is going to Automatic State TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.44 |
metro1500switchLockedTrap is sent when the Switch is going to Locked State TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.45 |
metro1500switchLineAavailTrap is sent when the Switch Line A is available TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.46 |
metro1500switchLineANotAvailTrap is sent when the Switch Line A is not available TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.47 |
metro1500switchLineBavailTrap is sent when the Switch Line B is available TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.48 |
metro1500switchLineBNotAvailTrap is sent when the Switch Line B is not available TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.49 |
metro1500repeatedMessageTrap is sent, after three times the same trap is sent (instead of
the fourth one). The original trap is suppressed for one minute. TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.50 |
metro1500INNCDownTrap is sent, when the Inter NEMI Network Connection (INNC) is down. TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.51 |
metro1500INNCUpTrap is sent, when the Inter NEMI Network Connection (INNC) is up. TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.52 |
metro1500EthernetHubPortEnableTrap is sent, when one of the ports of the Ethernet Hub is
enabled by the management software (default). Use SNMP Get
to get the Port Number. TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.60 |
metro1500EthernetHubPortDisableTrap is sent, when one of the ports of the Ethernet Hub is
disabled by the management Software. Use SNMP Get to get
the Port number. TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.61 |
metro1500EthernetHubPortPartitionedTrap is sent, when a Hub Port is disabled by the Hub Hardware.
Use SNMP Get to get the Port Number. TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.62 |
metro1500EthernetHubPortNotPartitionedTrap is sent, when a Hub Port is enabled by the Hub Hardware
(default). Use SNMP Get to get the Port Number. TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.63 |
metro1500EthernetHubPortLinkPulsesTrap is sent, when a Hub Port starts receiving Link Pulses.
Use SNMP Get to get the Port Number TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.64 |
metro1500EthernetHubPortNoLinkPulsesTrap is sent, when a Hub Port stops receiving Link Pulses.
Use SNMP Get to get the Port Number TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.65 |
metro1500TDMRemoteSyncLossTrap is sent, when the synchronisation of the incoming
remote data stream is lost TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.70 |
metro1500TDMRemoteSyncTrap is sent, when the synchronisation of the incoming
remote data stream is established TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.71 |
metro1500TDMLocModuleEnabled1Trap is sent, when local module 1 is enabled by software TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.72 |
metro1500TDMLocModuleDisable1Trap is sent, when local module 1 is disabled by software TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.73 |
metro1500TDMLocModuleEnabled2Trap is sent, when local module 2 is enabled by software TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.74 |
metro1500TDMLocModuleDisable2Trap is sent, when local module 2 is disabled by software TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.75 |
metro1500TDMLocModuleEnabled3Trap is sent, when local module 3 is enabled by software TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.76 |
metro1500TDMLocModuleDisable3Trap is sent, when local module 3 is disabled by software TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.77 |
metro1500TDMLocModuleEnabled4Trap is sent, when local module 4 is enabled by software TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.78 |
metro1500TDMLocModuleDisable4Trap is sent, when local module 4 is disabled by software TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.79 |
metro1500TDMLocModuleRxOn1Trap is sent, when the local receiver 1 of a TDM card gets
modulated signal TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.88 |
metro1500TDMLocModuleRxOff1Trap is sent, when the local receiver 1 of a TDM card doesn't
get modulated signal TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.89 |
metro1500TDMLocModuleRxOn2Trap is sent, when the local receiver 2 of a TDM card gets
modulated signal TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.90 |
metro1500TDMLocModuleRxOff2Trap is sent, when the local receiver 2 of a TDM card doesn't
get modulated signal TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.91 |
metro1500TDMLocModuleRxOn3Trap is sent, when the local receiver 3 of a TDM card gets
modulated signal TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.92 |
metro1500TDMLocModuleRxOff3Trap is sent, when the local receiver 3 of a TDM card doesn't
get modulated signal TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.93 |
metro1500TDMLocModuleRxOn4Trap is sent, when the local receiver 4 of a TDM card gets
modulated signal TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.94 |
metro1500TDMLocModuleRxOff4Trap is sent, when the local receiver 4 of a TDM card doesn't
get modulated signal TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.95 |
metro1500TDMLocModuleData1Trap is sent, when data from the remote side is available for
this TDM channel TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.104 |
metro1500TDMLocModuleNoData1Trap is sent, when no data from the remote side is available for
this TDM channel TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.105 |
metro1500TDMLocModuleData2Trap is sent, when data from the remote side is available for
this TDM channel TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.106 |
metro1500TDMLocModuleNoData2Trap is sent, when no data from the remote side is available for
this TDM channel TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.107 |
metro1500TDMLocModuleData3Trap is sent, when data from the remote side is available for
this TDM channel TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.108 |
metro1500TDMLocModuleNoData3Trap is sent, when no data from the remote side is available for
this TDM channel TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.109 |
metro1500TDMLocModuleData4Trap is sent, when data from the remote side is available for
this TDM channel TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.110 |
metro1500TDMLocModuleNoData4Trap is sent, when no data from the remote side is available for
this TDM channel TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.111 |
metro1500TDMLocModuleClockFail1Trap is sent, when the Data Rate of the local input signal doesn't
match the Data Rate of the local clock TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.120 |
metro1500TDMLocModuleClockNoFail1Trap is sent, when the Data Rate of the local input signal matches
the Data Rate of the local clock TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.121 |
metro1500TDMLocModuleClockFail2Trap is sent, when the Data Rate of the local input signal doesn't
match the Data Rate of the local clock TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.122 |
metro1500TDMLocModuleClockNoFail2Trap is sent, when the Data Rate of the local input signal matches
the Data Rate of the local clock TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.123 |
metro1500TDMLocModuleClockFail3Trap is sent, when the Data Rate of the local input signal doesn't
match the Data Rate of the local clock TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.124 |
metro1500TDMLocModuleClockNoFail3Trap is sent, when the Data Rate of the local input signal matches
the Data Rate of the local clock TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.125 |
metro1500TDMLocModuleClockFail4Trap is sent, when the Data Rate of the local input signal doesn't
match the Data Rate of the local clock TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.126 |
metro1500TDMLocModuleClockNoFail4Trap is sent, when the Data Rate of the local input signal matches
the Data Rate of the local clock TRAP-TYPE .1.3.6.1.4.1.2544.1.3.100.0.127 |