ME1200-RMIRROR-MIB
This is a private version of Rmirror
Main OID:
me1200RmirrorMib.1.3.6.1.4.1.9.9.815.1.120
35
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
35 total| Object Name |
|---|
me1200RmirrorMibThis is a private version of Rmirror MODULE-IDENTITY .1.3.6.1.4.1.9.9.815.1.120 |
me1200RmirrorMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.120.1 |
me1200RmirrorCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.120.1.1 |
me1200RmirrorCapabilitiesReflectorPortSupportIndicate if reflector port is configurable or not. true(1) means
supported. false(2) means not supported.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.120.1.1.1 |
me1200RmirrorCapabilitiesCpuMirrorSupportIndicate if mirroring CPU traffic is supported or not. true(1) means
supported. false(2) means not supported.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.120.1.1.2 |
me1200RmirrorConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.120.1.2 |
me1200RmirrorConfigSessionTableThis is a table of global configuration per session SEQUENCE OF ME1200RmirrorConfigSessionEntry .1.3.6.1.4.1.9.9.815.1.120.1.2.1 |
me1200RmirrorConfigSessionEntryEach session has a set of parameters ME1200RmirrorConfigSessionEntry .1.3.6.1.4.1.9.9.815.1.120.1.2.1.1 |
me1200RmirrorConfigSessionSessionIdSession ID. Integer32 .1.3.6.1.4.1.9.9.815.1.120.1.2.1.1.1 |
me1200RmirrorConfigSessionModeEnable/Disable the mirror or Remote Mirroring function. true(1) is to
enable the function. false(2) is to disable it.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.120.1.2.1.1.2 |
me1200RmirrorConfigSessionSwitchTypeSwitch type in rmirror. mirror(0) means to do the mirror function on
the device. source(1) means the device acts as source node for monitor
flow. intermediate(2) means the device acts as forwarding node for
monitor flow. The object is to forward traffic from source switch to
destination switch. destination(3) means the device acts as end node
for moniot flow.rw ME1200RmirrorSwitchType .1.3.6.1.4.1.9.9.815.1.120.1.2.1.1.3 |
me1200RmirrorConfigSessionVidThe VLAN ID points out where the monitor packet will copy to.rw ME1200Unsigned16 .1.3.6.1.4.1.9.9.815.1.120.1.2.1.1.4 |
me1200RmirrorConfigSessionSourceCpuTableThis is a table of source CPU configuration per session SEQUENCE OF ME1200RmirrorConfigSessionSourceCpuEntry .1.3.6.1.4.1.9.9.815.1.120.1.2.2 |
me1200RmirrorConfigSessionSourceCpuEntryEach session has a set of parameters ME1200RmirrorConfigSessionSourceCpuEntry .1.3.6.1.4.1.9.9.815.1.120.1.2.2.1 |
me1200RmirrorConfigSessionSourceCpuSessionIdSession ID. Integer32 .1.3.6.1.4.1.9.9.815.1.120.1.2.2.1.1 |
me1200RmirrorConfigSessionSourceCpuSwitchIdThe identification of switch. Integer32 .1.3.6.1.4.1.9.9.815.1.120.1.2.2.1.2 |
me1200RmirrorConfigSessionSourceCpuMirrorTypeMirror type on packets to/from CPU. none(0) means no mirror. tx(1) is
to monitor the packets sent from CPU. rx(2) is to monitor the packets
sent to CPU. both(3) is to monitor all packets sent from and to CPU.
Some platforms do not support CPU mirror. Refer to CpuMirrorSupport in
rmirrorCapabilities.rw ME1200RmirrorMirrorType .1.3.6.1.4.1.9.9.815.1.120.1.2.2.1.3 |
me1200RmirrorConfigSessionSourceVlanTableThis is a table of source VLAN configuration per session SEQUENCE OF ME1200RmirrorConfigSessionSourceVlanEntry .1.3.6.1.4.1.9.9.815.1.120.1.2.3 |
me1200RmirrorConfigSessionSourceVlanEntryEach session has a set of parameters ME1200RmirrorConfigSessionSourceVlanEntry .1.3.6.1.4.1.9.9.815.1.120.1.2.3.1 |
me1200RmirrorConfigSessionSourceVlanSessionIdSession ID. Integer32 .1.3.6.1.4.1.9.9.815.1.120.1.2.3.1.1 |
me1200RmirrorConfigSessionSourceVlanIfIndexLogical interface number of VLAN. ME1200InterfaceIndex (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.120.1.2.3.1.2 |
me1200RmirrorConfigSessionSourceVlanModeEnable/Disable monitor per VLAN. true(1) is to enable the function.
false(2) is to disable it.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.120.1.2.3.1.3 |
me1200RmirrorConfigSessionSourcePortTableThis is a table of source port configuration per session SEQUENCE OF ME1200RmirrorConfigSessionSourcePortEntry .1.3.6.1.4.1.9.9.815.1.120.1.2.4 |
me1200RmirrorConfigSessionSourcePortEntryEach session has a set of parameters ME1200RmirrorConfigSessionSourcePortEntry .1.3.6.1.4.1.9.9.815.1.120.1.2.4.1 |
me1200RmirrorConfigSessionSourcePortSessionIdSession ID. Integer32 .1.3.6.1.4.1.9.9.815.1.120.1.2.4.1.1 |
me1200RmirrorConfigSessionSourcePortIfIndexLogical interface number of physical port. ME1200InterfaceIndex (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.120.1.2.4.1.2 |
me1200RmirrorConfigSessionSourcePortMirrorTypeMirror type on frames to/from port. none(0) means no mirror. tx(1) is
to monitor the packets sent from the port. rx(2) is to monitor the
packets sent to the port. both(3) is to monitor all packets sent from
and to the port.rw ME1200RmirrorMirrorType .1.3.6.1.4.1.9.9.815.1.120.1.2.4.1.3 |
me1200RmirrorConfigSessionPortTableThis is a table of port configuration per session SEQUENCE OF ME1200RmirrorConfigSessionPortEntry .1.3.6.1.4.1.9.9.815.1.120.1.2.5 |
me1200RmirrorConfigSessionPortEntryEach session has a set of parameters ME1200RmirrorConfigSessionPortEntry .1.3.6.1.4.1.9.9.815.1.120.1.2.5.1 |
me1200RmirrorConfigSessionPortSessionIdSession ID. Integer32 .1.3.6.1.4.1.9.9.815.1.120.1.2.5.1.1 |
me1200RmirrorConfigSessionPortIfIndexLogical interface number of physical port. ME1200InterfaceIndex (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.120.1.2.5.1.2 |
me1200RmirrorConfigSessionPortTypeType of port in rmirror function. none(0) means no mirror.
intermediate(1) means the port to be a forwarding port. destination(2)
means the port to be an end port. reflector(3) means the port to be a
reflector port.rw ME1200RmirrorPortType .1.3.6.1.4.1.9.9.815.1.120.1.2.5.1.3 |
me1200RmirrorMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.120.2 |
me1200RmirrorMibCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.120.2.1 |
me1200RmirrorMibGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.120.2.2 |