ME1200-QOS-MIB
This is a private MIB for QoS
Main OID:
me1200QosMIB.1.3.6.1.4.1.9.9.815.1.14
277
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
277 total| Object Name |
|---|
me1200QosMIBThis is a private MIB for QoS MODULE-IDENTITY .1.3.6.1.4.1.9.9.815.1.14 |
me1200QosMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.14.1 |
me1200QosConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.14.1.2 |
me1200QosGlobals OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.14.1.2.1 |
me1200QosStormPolicers OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.14.1.2.1.1 |
me1200QosStormPolicerUnicast OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.14.1.2.1.1.1 |
me1200QosStormPolicerUnicastEnableIf true, the storm policer is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.1.1.1 |
me1200QosStormPolicerUnicastRateConfigure the storm policer rate in frames/second. Valid values are: 1,
2, 4, 8, 16, 32, 64, 128, 256, 512, 1000, 2000, 4000, 8000, 16000,
32000, 64000, 128000, 256000, 512000, 1024000rw Unsigned32 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.1.1.2 |
me1200QosStormPolicerMulticast OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.14.1.2.1.1.2 |
me1200QosStormPolicerMulticastEnableIf true, the storm policer is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.1.2.1 |
me1200QosStormPolicerMulticastRateConfigure the storm policer rate in frames/second. Valid values are: 1,
2, 4, 8, 16, 32, 64, 128, 256, 512, 1000, 2000, 4000, 8000, 16000,
32000, 64000, 128000, 256000, 512000, 1024000rw Unsigned32 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.1.2.2 |
me1200QosStormPolicerBroadcast OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.14.1.2.1.1.3 |
me1200QosStormPolicerBroadcastEnableIf true, the storm policer is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.1.3.1 |
me1200QosStormPolicerBroadcastRateConfigure the storm policer rate in frames/second. Valid values are: 1,
2, 4, 8, 16, 32, 64, 128, 256, 512, 1000, 2000, 4000, 8000, 16000,
32000, 64000, 128000, 256000, 512000, 1024000rw Unsigned32 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.1.3.2 |
me1200QosWredTableThis table contains the configuration of WRED for queue 0 through 5 SEQUENCE OF ME1200QosWredEntry .1.3.6.1.4.1.9.9.815.1.14.1.2.1.2 |
me1200QosWredEntryEach row contains the configuration for a specific queue ME1200QosWredEntry .1.3.6.1.4.1.9.9.815.1.14.1.2.1.2.1 |
me1200QosWredQueueQueue index. Integer32 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.2.1.1 |
me1200QosWredEnableIf true, RED is enabled for this queuerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.2.1.2 |
me1200QosWredMinimumFillLevelControls the lower RED fill level threshold in percent of the whole
queue. If the queue filling level is below this threshold, the drop
probability is zero. Valid range is 0-100rw ME1200Percent (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.2.1.3 |
me1200QosWredMaximumControls the upper RED drop probability or fill level threshold for
frames marked with Drop Precedence Level 1 (yellow frames). Valid range
is 1-100rw ME1200Percent (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.2.1.4 |
me1200QosWredMaxSelectorSelects whether 'Maximum' controls 'Maximum Drop Probability' or
'Maximum Fill Level'.rw ME1200MaxSelector .1.3.6.1.4.1.9.9.815.1.14.1.2.1.2.1.5 |
me1200QosDscpTableThis table has 64 entries, one for each DSCP value SEQUENCE OF ME1200QosDscpEntry .1.3.6.1.4.1.9.9.815.1.14.1.2.1.3 |
me1200QosDscpEntryEach row contains the configuration for a specific DSCP ME1200QosDscpEntry .1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1 |
me1200QosDscpDscpDSCP index. Dscp (DIFFSERV-DSCP-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.1 |
me1200QosDscpTrustIf true, this DSCP value is trusted. Packets arriving on interfaces
where 'TrustDscp' is enabled will be classified to the corresponding
CoS and DPL in this table.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.2 |
me1200QosDscpCosThe CoS value which the DSCP value maps to. Valid range is 0-7.rw Unsigned32 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.3 |
me1200QosDscpDplThe DPL (Drop Precedence Level) which the DSCP value maps to. Valid
range is 0-1.rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.4 |
me1200QosDscpIngressTranslationThe new classified DSCP value which the original DSCP value is replaced
with if 'DscpTranslate' is enabled on the interfacerw Dscp (DIFFSERV-DSCP-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.5 |
me1200QosDscpClassifyIf true, then packets received on interfaces where 'DscpClassify' is
set to 'selected' will be classified to a new DSCP value based on the
classified CoS and DPL value configured in the qosCosDscpTable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.6 |
me1200QosDscpEgressTranslationThe new DSCP value that will be written into the packet at egress if
'DscpRemark' on the interface is set to 'remap' or 'remap-dp'. If
'remap-dp' is set then only packets classified to Dpl 0 will use this
table.rw Dscp (DIFFSERV-DSCP-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.7 |
me1200QosDscpEgressTranslationDp1The new DSCP value that will be written into the packet at egress if
'DscpRemark' on the interface is set to 'remap-dp'. Only packets
classified to Dpl 1 will use this table.rw Dscp (DIFFSERV-DSCP-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.8 |
me1200QosCosToDscpTableThis table has QOS_CLASS_CNT entries, one for each Cos value SEQUENCE OF ME1200QosCosToDscpEntry .1.3.6.1.4.1.9.9.815.1.14.1.2.1.4 |
me1200QosCosToDscpEntryEach row contains the configuration for a specific Cos ME1200QosCosToDscpEntry .1.3.6.1.4.1.9.9.815.1.14.1.2.1.4.1 |
me1200QosCosToDscpCosCoS index. Integer32 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.4.1.1 |
me1200QosCosToDscpDscpThe DSCP value which the classified CoS value maps to when the
classified DPL is 0.rw Dscp (DIFFSERV-DSCP-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.4.1.2 |
me1200QosCosToDscpDscpDp1The DSCP value which the classified CoS value maps to when the
classified DPL is 1.rw Dscp (DIFFSERV-DSCP-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.4.1.3 |
me1200QosQce OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10 |
me1200QosQceTableThis table contains the configuration of QCEs. The index is QceId. SEQUENCE OF ME1200QosQceEntry .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1 |
me1200QosQceEntryEach row contains the configuration of a single QCE. ME1200QosQceEntry .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1 |
me1200QosQceQceIdQCE Id index. Integer32 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1 |
me1200QosQceNextQceIdQCE Id of the next QCE.rw Unsigned32 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.2 |
me1200QosQcePortListList of ports that are member of this QCE.rw ME1200PortList (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.4 |
me1200QosQceDestMacTypeIndicates the destination MAC type to match.rw ME1200DestMacType .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.5 |
me1200QosQceDestMacIndicates the 48 bits destination MAC address. The packets destination
address is AND-ed with the value of DestMacMask and then compared
against the value of this object. If this object value and the value of
DestMacMask is 00-00-00-00-00-00, this entry matches any destination
MAC address. This object can only be configured if DestMacType is
any(0) and DestMacMask is ff-ff-ff-ff-ff-ff.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.6 |
me1200QosQceDestMacMaskIndicates the 48 bits destination MAC address mask.Valid values are
00-00-00-00-00-00 or ff-ff-ff-ff-ff-ff.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.7 |
me1200QosQceSrcMacIndicates the 48 bits source MAC address. The packets source address is
AND-ed with the value of SrcMacMask and then compared against the value
of this object. If this object value and the value of SrcMacMask is
00-00-00-00-00-00, this entry matches any source MAC address. This
object can only be configured if SrcMacMask is ff-ff-ff-ff-ff-ff.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.8 |
me1200QosQceSrcMacMaskIndicates the 48 bits source MAC address mask. Valid values are
00-00-00-00-00-00 or ff-ff-ff-ff-ff-ff.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.9 |
me1200QosQceVlanTagTypeIndicates the VLAN tag type to match.rw ME1200VlanTagType .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.10 |
me1200QosQceVlanIdOpIndicates how a packets's VLAN ID is to be compared.rw ME1200ASRType .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.11 |
me1200QosQceVlanIdThe VLAN ID to be compared. If the VlanIdOp object in the same row is
range(2), this object will be the starting VLAN ID of the range. Valid
range is 1-4095. This object can only be configured if VlanIdOp is not
any(0).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.12 |
me1200QosQceVlanIdRangeThe VLAN ID to be compared. If the VlanIdOp object in the same row is
range(2), this object will be the ending VLAN ID of the range. Valid
range is 1-4095. This object can only be configured if VlanIdOp is
range(2).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.13 |
me1200QosQcePcpThe PCP value(s) to be compared.rw ME1200VlanTagPriority .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.14 |
me1200QosQceDeiThe DEI value to be compared. Valid range is 0-1.rw ME1200BitType .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.15 |
me1200QosQceInnerVlanTagTypeIndicates the inner VLAN tag type to match.rw ME1200VlanTagType .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.16 |
me1200QosQceInnerVlanIdOpIndicates how a packets's inner VLAN ID is to be compared.rw ME1200ASRType .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.17 |
me1200QosQceInnerVlanIdThe inner VLAN ID to be compared. If the InnerVlanIdOp object in the
same row is range(2), this object will be the starting VLAN ID of the
range. Valid range is 1-4095. This object can only be configured if
InnerVlanIdOp is not any(0).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.18 |
me1200QosQceInnerVlanIdRangeThe inner VLAN ID to be compared. If the InnerVlanIdOp object in the
same row is range(2), this object will be the ending VLAN ID of the
range. Valid range is 1-4095. This object can only be configured if
InnerVlanIdOp is range(2).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.19 |
me1200QosQceInnerPcpThe inner PCP value(s) to be compared.rw ME1200VlanTagPriority .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.20 |
me1200QosQceInnerDeiThe inner DEI value to be compared. Valid range is 0-1.rw ME1200BitType .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.21 |
me1200QosQceFrameTypeIndicates the packet's frame type. Modifying the frame type on an
existing QCE will restore the content of all frame type dependent
configuration to default.rw ME1200QceFrameType .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.100 |
me1200QosQceEtypeIndicates the packet's 16 bit Ethernet type field. Valid values are:
0(match any), 0x600-0xFFFF but excluding 0x800(IPv4) and
0x86DD(IPv6).This object can only be configured if FrameType is
etype(1).rw ME1200EtherType (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.101 |
me1200QosQceLlcDsapIndicates the packets's 8 bit LLC DSAP field. The packets LLC DSAP
field is AND-ed with the value of LlcDsapMask and then compared against
the value of this object. If this object value and the value of
LlcDsapMask is 0x00, this entry matches any LLC DSAP. Valid range is
0x00-0xFF. This object can only be configured if FrameType is llc(2).rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.200 |
me1200QosQceLlcDsapMaskIndicates the 8 bit LLC DSAP mask. Valid values are 0x00 or 0xFF. This
object can only be configured if FrameType is llc(2).rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.201 |
me1200QosQceLlcSsapIndicates the packets's 8 bit LLC SSAP field. The packets LLC SSAP
field is AND-ed with the value of LlcSsapMask and then compared against
the value of this object. If this object value and the value of
LlcSsapMask is 0x00, this entry matches any LLC SSAP. Valid range is
0x00-0xFF. This object can only be configured if FrameType is llc(2).rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.202 |
me1200QosQceLlcSsapMaskIndicates the 8 bit LLC SSAP mask. Valid values are 0x00 or 0xFF. This
object can only be configured if FrameType is llc(2).rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.203 |
me1200QosQceLlcControlIndicates the packets's 8 bit LLC Control field. The packets LLC
Control field is AND-ed with the value of LlcControlMask and then
compared against the value of this object. If this object value and the
value of LlcControlMask is 0x00, this entry matches any LLC Control.
Valid range is 0x00-0xFF. This object can only be configured if
FrameType is llc(2).rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.204 |
me1200QosQceLlcControlMaskIndicates the 8 bit LLC Control mask. Valid values are 0x00 or 0xFF.
This object can only be configured if FrameType is llc(2).rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.205 |
me1200QosQceSnapPidIndicates the packet's 16 bit SNAP PID field. The packets SNAP PID
field is AND-ed with the value of SnapPidMask and then compared against
the value of this object. If this object value and the value of
SnapPidMask is 0x0000, this entry matches any ethertype. This object
can only be configured if FrameType is snap(3).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.302 |
me1200QosQceSnapPidMaskIndicates the 16 bit SNAP PID mask. Valid values are 0x0000 or 0xFFFF.
This object can only be configured if FrameType is snap(3).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.303 |
me1200QosQceIpv4FragmentIndicates how an IPv4 fragment bit is to be compared. This object can
only be configured if FrameType is ipv4(4).rw ME1200BitType .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.400 |
me1200QosQceIpv4DscpOpIndicates how an IPv4 DSCP field is to be compared. This object can
only be configured if FrameType is ipv4(4).rw ME1200ASRType .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.401 |
me1200QosQceIpv4DscpThe DSCP value to be compared. If the Ipv4DscpOp object in the same row
is range(2), this object will be the starting DSCP value of the range.
Valid range is 0-63. This object can only be configured if FrameType is
ipv4(4) and Ipv4DscpOp is not any(0).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.402 |
me1200QosQceIpv4DscpRangeThe DSCP value to be compared. If the Ipv4DscpOp object in the same row
is range(2), this object will be the ending DSCP value of the range.
Valid range is 0-63. This object can only be configured if FrameType is
ipv4(4) and Ipv4DscpOp is range(2).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.403 |
me1200QosQceIpv4ProtocolThe protocol number field in the IPv4 header used to indicate a higher
layer protocol. The packets protocol number field is AND-ed with the
value of Ipv4ProtocolMask and then compared with the value of this
object. If Ipv4Protocol and Ipv4protocolMask are 0, this entry matches
any IPv4 protocol. Valid range is 0-255. This object can only be
configured if FrameType is ipv4(4).rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.404 |
me1200QosQceIpv4ProtocolMaskThe specified IPv4 protocol number mask. Valid values are 0 or 255.
This object can only be configured if FrameType is ipv4(4).rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.405 |
me1200QosQceIpv4SrcIpThe specified IPv4 source address. The packets source address is AND-ed
with the value of Ipv4SrcIpMask and then compared with the value of
this object. If Ipv4SrcIP and Ipv4SrcIpMask are 0.0.0.0, this entry
matches any IPv4 source address. This object can only be configured if
FrameType is ipv4(4).rw IpAddress .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.406 |
me1200QosQceIpv4SrcIpMaskThe specified IPv4 source address mask. This object can only be
configured if FrameType is ipv4(4).rw IpAddress .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.407 |
me1200QosQceIpv4DestIpThe specified IPv4 destination address. The packets destination address
is AND-ed with the value of Ipv4DestIpMask and then compared with the
value of this object. If Ipv4DestIP and Ipv4DestIpMask are 0.0.0.0,
this entry matches any IPv4 destination address. This object can only
be configured if FrameType is ipv4(4).rw IpAddress .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.408 |
me1200QosQceIpv4DestIpMaskThe specified IPv4 destination address mask. This object can only be
configured if FrameType is ipv4(4).rw IpAddress .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.409 |
me1200QosQceIpv4SrcPortOpIndicates how a packet's source TCP/UDP port number is to be compared.
This object can only be configured if FrameType is ipv4(4).rw ME1200ASRType .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.410 |
me1200QosQceIpv4SrcPortThe source port number of the TCP or UDP protocol. If the Ipv4SrcPortOp
object in the same row is range(2), this object will be the starting
port number of the port range. Valid range is 0-65535. This object can
only be configured if FrameType is ipv4(4) and Ipv4SrcPortOp is not
any(0).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.411 |
me1200QosQceIpv4SrcPortRangeThe source port number of the TCP or UDP protocol. If the Ipv4SrcPortOp
object in the same row is range(2), this object will be the ending port
number of the port range. Valid range is 0-65535. This object can only
be configured if FrameType is ipv4(4) and Ipv4SrcPortOp is range(2).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.412 |
me1200QosQceIpv4DestPortOpIndicates how a packet's destination TCP/UDP port number is to be
compared. This object can only be configured if FrameType is ipv4(4).rw ME1200ASRType .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.413 |
me1200QosQceIpv4DestPortThe destination port number of the TCP or UDP protocol. If the
Ipv4DestPortOp object in the same row is range(2), this object will be
the starting port number of the port range. Valid range is 0-65535.
This object can only be configured if FrameType is ipv4(4) and
Ipv4DestPortOp is not any(0).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.414 |
me1200QosQceIpv4DestPortRangeThe source port number of the TCP or UDP protocol. If the
Ipv4DestPortOp object in the same row is range(2), this object will be
the ending port number of the port range. Valid range is 0-65535. This
object can only be configured if FrameType is ipv4(4) and
Ipv4DestPortOp is range(2).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.415 |
me1200QosQceIpv6DscpOpIndicates how an IPv6 DSCP field is to be compared. This object can
only be configured if FrameType is ipv6(5).rw ME1200ASRType .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.500 |
me1200QosQceIpv6DscpThe DSCP value to be compared. If the Ipv6DscpOp object in the same row
is range(2), this object will be the starting DSCP value of the range.
Valid range is 0-63. This object can only be configured if FrameType is
ipv6(5) and Ipv6DscpOp is not any(0).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.501 |
me1200QosQceIpv6DscpRangeThe DSCP value to be compared. If the Ipv6DscpOp object in the same row
is range(2), this object will be the ending DSCP value of the range.
Valid range is 0-63. This object can only be configured if FrameType is
ipv6(5) and Ipv6DscpOp is range(2).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.502 |
me1200QosQceIpv6ProtocolThe protocol number field in the IPv6 header used to indicate a higher
layer protocol. The packets protocol number field is AND-ed with the
value of Ipv6ProtocolMask and then compared with the value of this
object. If Ipv46rotocol and Ipv6protocolMask are 0, this entry matches
any IPv6 protocol. Valid range is 0-255. This object can only be
configured if FrameType is ipv6(5).rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.503 |
me1200QosQceIpv6ProtocolMaskThe specified IPv6 protocol number mask. Valid values are 0 or 255.
This object can only be configured if FrameType is ipv6(5).rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.504 |
me1200QosQceIpv6SrcIpThe specified IPv6 source address. The packets source address is AND-ed
with the value of Ipv6SrcIpMask and then compared with the value of
this object. If Ipv6SrcIP and Ipv6SrcIpMask are all zeros, this entry
matches any IPv6 source address. Only the least significant 32 bits of
this object are used. This object can only be configured if FrameType
is ipv6(5).rw InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.506 |
me1200QosQceIpv6SrcIpMaskThe specified IPv6 source address mask. Only the least significant 32
bits of this object are used. This object can only be configured if
FrameType is ipv6(5).rw InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.508 |
me1200QosQceIpv6DestIpThe specified IPv6 destination address. The packets destination address
is AND-ed with the value of Ipv6DestIpMask and then compared with the
value of this object. If Ipv6DestIP and Ipv6DestIpMask are all zeros,
this entry matches any IPv6 destination address. Only the least
significant 32 bits of this object are used. This object can only be
configured if FrameType is ipv6(5).rw InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.510 |
me1200QosQceIpv6DestIpMaskThe specified IPv6 destination address mask. Only the least significant
32 bits of this object are used. This object can only be configured if
FrameType is ipv6(5).rw InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.512 |
me1200QosQceIpv6SrcPortOpIndicates how a packet's source TCP/UDP port number is to be compared.
This object can only be configured if FrameType is ipv6(5).rw ME1200ASRType .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.513 |
me1200QosQceIpv6SrcPortThe source port number of the TCP or UDP protocol. If the Ipv6SrcPortOp
object in the same row is range(2), this object will be the starting
port number of the port range. Valid range is 0-65535. This object can
only be configured if FrameType is ipv6(5) and Ipv6SrcPortOp is not
any(0).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.514 |
me1200QosQceIpv6SrcPortRangeThe source port number of the TCP or UDP protocol. If the Ipv6SrcPortOp
object in the same row is range(2), this object will be the ending port
number of the port range. Valid range is 0-65535. This object can only
be configured if FrameType is ipv6(5) and Ipv6SrcPortOp is range(2).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.515 |
me1200QosQceIpv6DestPortOpIndicates how a packet's destination TCP/UDP port number is to be
compared. This object can only be configured if FrameType is ipv6(5).rw ME1200ASRType .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.516 |
me1200QosQceIpv6DestPortThe destination port number of the TCP or UDP protocol. If the
Ipv6DestPortOp object in the same row is range(2), this object will be
the starting port number of the port range. Valid range is 0-65535.
This object can only be configured if FrameType is ipv6(5) and
Ipv6DestPortOp is not any(0).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.517 |
me1200QosQceIpv6DestPortRangeThe source port number of the TCP or UDP protocol. If the
Ipv6DestPortOp object in the same row is range(2), this object will be
the ending port number of the port range. Valid range is 0-65535. This
object can only be configured if FrameType is ipv6(5) and
Ipv6DestPortOp is range(2).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.518 |
me1200QosQceActionCosEnableIf true, the packet is classified to the CoS value in ActionCos.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1000 |
me1200QosQceActionCosThe CoS value used for classification. Valid range is 0-7.rw Unsigned32 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1001 |
me1200QosQceActionDplEnableIf true, the packet is classified to the DPL value in ActionDpl.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1002 |
me1200QosQceActionDplThe DPL value used for classification. Valid range is 0-1.rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1003 |
me1200QosQceActionDscpEnableIf true, the packet is classified to the DSCP value in ActionDscp.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1004 |
me1200QosQceActionDscpThe DSCP value used for classification. Valid range is 0-1.rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1005 |
me1200QosQceActionPcpDeiEnableIf true, the packet is classified to the PCP value in ActionPcp and the
DEI value in ActionDei.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1006 |
me1200QosQceActionPcpThe PCP value used for classification. Valid range is 0-7.rw Unsigned32 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1007 |
me1200QosQceActionDeiThe DEI value used for classification. Valid range is 0-1.rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1008 |
me1200QosQceActionPolicyEnableIf true, the packet is classified to the policy number in ActionPolicy.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1009 |
me1200QosQceActionPolicyThe policy number used for classification. Valid range is 0-63.rw Unsigned32 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1010 |
me1200QosQceActionActionrw ME1200RowEditorState (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.10000 |
me1200QosQceTableRowEditor OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2 |
me1200QosQceTableRowEditorQceIdQCE Id index.rw Integer32 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1 |
me1200QosQceTableRowEditorNextQceIdQCE Id of the next QCE.rw Unsigned32 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.2 |
me1200QosQceTableRowEditorPortListList of ports that are member of this QCE.rw ME1200PortList (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.4 |
me1200QosQceTableRowEditorDestMacTypeIndicates the destination MAC type to match.rw ME1200DestMacType .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.5 |
me1200QosQceTableRowEditorDestMacIndicates the 48 bits destination MAC address. The packets destination
address is AND-ed with the value of DestMacMask and then compared
against the value of this object. If this object value and the value of
DestMacMask is 00-00-00-00-00-00, this entry matches any destination
MAC address. This object can only be configured if DestMacType is
any(0) and DestMacMask is ff-ff-ff-ff-ff-ff.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.6 |
me1200QosQceTableRowEditorDestMacMaskIndicates the 48 bits destination MAC address mask.Valid values are
00-00-00-00-00-00 or ff-ff-ff-ff-ff-ff.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.7 |
me1200QosQceTableRowEditorSrcMacIndicates the 48 bits source MAC address. The packets source address is
AND-ed with the value of SrcMacMask and then compared against the value
of this object. If this object value and the value of SrcMacMask is
00-00-00-00-00-00, this entry matches any source MAC address. This
object can only be configured if SrcMacMask is ff-ff-ff-ff-ff-ff.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.8 |
me1200QosQceTableRowEditorSrcMacMaskIndicates the 48 bits source MAC address mask. Valid values are
00-00-00-00-00-00 or ff-ff-ff-ff-ff-ff.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.9 |
me1200QosQceTableRowEditorVlanTagTypeIndicates the VLAN tag type to match.rw ME1200VlanTagType .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.10 |
me1200QosQceTableRowEditorVlanIdOpIndicates how a packets's VLAN ID is to be compared.rw ME1200ASRType .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.11 |
me1200QosQceTableRowEditorVlanIdThe VLAN ID to be compared. If the VlanIdOp object in the same row is
range(2), this object will be the starting VLAN ID of the range. Valid
range is 1-4095. This object can only be configured if VlanIdOp is not
any(0).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.12 |
me1200QosQceTableRowEditorVlanIdRangeThe VLAN ID to be compared. If the VlanIdOp object in the same row is
range(2), this object will be the ending VLAN ID of the range. Valid
range is 1-4095. This object can only be configured if VlanIdOp is
range(2).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.13 |
me1200QosQceTableRowEditorPcpThe PCP value(s) to be compared.rw ME1200VlanTagPriority .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.14 |
me1200QosQceTableRowEditorDeiThe DEI value to be compared. Valid range is 0-1.rw ME1200BitType .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.15 |
me1200QosQceTableRowEditorInnerVlanTagTypeIndicates the inner VLAN tag type to match.rw ME1200VlanTagType .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.16 |
me1200QosQceTableRowEditorInnerVlanIdOpIndicates how a packets's inner VLAN ID is to be compared.rw ME1200ASRType .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.17 |
me1200QosQceTableRowEditorInnerVlanIdThe inner VLAN ID to be compared. If the InnerVlanIdOp object in the
same row is range(2), this object will be the starting VLAN ID of the
range. Valid range is 1-4095. This object can only be configured if
InnerVlanIdOp is not any(0).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.18 |
me1200QosQceTableRowEditorInnerVlanIdRangeThe inner VLAN ID to be compared. If the InnerVlanIdOp object in the
same row is range(2), this object will be the ending VLAN ID of the
range. Valid range is 1-4095. This object can only be configured if
InnerVlanIdOp is range(2).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.19 |
me1200QosQceTableRowEditorInnerPcpThe inner PCP value(s) to be compared.rw ME1200VlanTagPriority .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.20 |
me1200QosQceTableRowEditorInnerDeiThe inner DEI value to be compared. Valid range is 0-1.rw ME1200BitType .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.21 |
me1200QosQceTableRowEditorFrameTypeIndicates the packet's frame type. Modifying the frame type on an
existing QCE will restore the content of all frame type dependent
configuration to default.rw ME1200QceFrameType .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.100 |
me1200QosQceTableRowEditorEtypeIndicates the packet's 16 bit Ethernet type field. Valid values are:
0(match any), 0x600-0xFFFF but excluding 0x800(IPv4) and
0x86DD(IPv6).This object can only be configured if FrameType is
etype(1).rw ME1200EtherType (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.101 |
me1200QosQceTableRowEditorLlcDsapIndicates the packets's 8 bit LLC DSAP field. The packets LLC DSAP
field is AND-ed with the value of LlcDsapMask and then compared against
the value of this object. If this object value and the value of
LlcDsapMask is 0x00, this entry matches any LLC DSAP. Valid range is
0x00-0xFF. This object can only be configured if FrameType is llc(2).rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.200 |
me1200QosQceTableRowEditorLlcDsapMaskIndicates the 8 bit LLC DSAP mask. Valid values are 0x00 or 0xFF. This
object can only be configured if FrameType is llc(2).rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.201 |
me1200QosQceTableRowEditorLlcSsapIndicates the packets's 8 bit LLC SSAP field. The packets LLC SSAP
field is AND-ed with the value of LlcSsapMask and then compared against
the value of this object. If this object value and the value of
LlcSsapMask is 0x00, this entry matches any LLC SSAP. Valid range is
0x00-0xFF. This object can only be configured if FrameType is llc(2).rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.202 |
me1200QosQceTableRowEditorLlcSsapMaskIndicates the 8 bit LLC SSAP mask. Valid values are 0x00 or 0xFF. This
object can only be configured if FrameType is llc(2).rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.203 |
me1200QosQceTableRowEditorLlcControlIndicates the packets's 8 bit LLC Control field. The packets LLC
Control field is AND-ed with the value of LlcControlMask and then
compared against the value of this object. If this object value and the
value of LlcControlMask is 0x00, this entry matches any LLC Control.
Valid range is 0x00-0xFF. This object can only be configured if
FrameType is llc(2).rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.204 |
me1200QosQceTableRowEditorLlcControlMaskIndicates the 8 bit LLC Control mask. Valid values are 0x00 or 0xFF.
This object can only be configured if FrameType is llc(2).rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.205 |
me1200QosQceTableRowEditorSnapPidIndicates the packet's 16 bit SNAP PID field. The packets SNAP PID
field is AND-ed with the value of SnapPidMask and then compared against
the value of this object. If this object value and the value of
SnapPidMask is 0x0000, this entry matches any ethertype. This object
can only be configured if FrameType is snap(3).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.302 |
me1200QosQceTableRowEditorSnapPidMaskIndicates the 16 bit SNAP PID mask. Valid values are 0x0000 or 0xFFFF.
This object can only be configured if FrameType is snap(3).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.303 |
me1200QosQceTableRowEditorIpv4FragmentIndicates how an IPv4 fragment bit is to be compared. This object can
only be configured if FrameType is ipv4(4).rw ME1200BitType .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.400 |
me1200QosQceTableRowEditorIpv4DscpOpIndicates how an IPv4 DSCP field is to be compared. This object can
only be configured if FrameType is ipv4(4).rw ME1200ASRType .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.401 |
me1200QosQceTableRowEditorIpv4DscpThe DSCP value to be compared. If the Ipv4DscpOp object in the same row
is range(2), this object will be the starting DSCP value of the range.
Valid range is 0-63. This object can only be configured if FrameType is
ipv4(4) and Ipv4DscpOp is not any(0).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.402 |
me1200QosQceTableRowEditorIpv4DscpRangeThe DSCP value to be compared. If the Ipv4DscpOp object in the same row
is range(2), this object will be the ending DSCP value of the range.
Valid range is 0-63. This object can only be configured if FrameType is
ipv4(4) and Ipv4DscpOp is range(2).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.403 |
me1200QosQceTableRowEditorIpv4ProtocolThe protocol number field in the IPv4 header used to indicate a higher
layer protocol. The packets protocol number field is AND-ed with the
value of Ipv4ProtocolMask and then compared with the value of this
object. If Ipv4Protocol and Ipv4protocolMask are 0, this entry matches
any IPv4 protocol. Valid range is 0-255. This object can only be
configured if FrameType is ipv4(4).rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.404 |
me1200QosQceTableRowEditorIpv4ProtocolMaskThe specified IPv4 protocol number mask. Valid values are 0 or 255.
This object can only be configured if FrameType is ipv4(4).rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.405 |
me1200QosQceTableRowEditorIpv4SrcIpThe specified IPv4 source address. The packets source address is AND-ed
with the value of Ipv4SrcIpMask and then compared with the value of
this object. If Ipv4SrcIP and Ipv4SrcIpMask are 0.0.0.0, this entry
matches any IPv4 source address. This object can only be configured if
FrameType is ipv4(4).rw IpAddress .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.406 |
me1200QosQceTableRowEditorIpv4SrcIpMaskThe specified IPv4 source address mask. This object can only be
configured if FrameType is ipv4(4).rw IpAddress .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.407 |
me1200QosQceTableRowEditorIpv4DestIpThe specified IPv4 destination address. The packets destination address
is AND-ed with the value of Ipv4DestIpMask and then compared with the
value of this object. If Ipv4DestIP and Ipv4DestIpMask are 0.0.0.0,
this entry matches any IPv4 destination address. This object can only
be configured if FrameType is ipv4(4).rw IpAddress .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.408 |
me1200QosQceTableRowEditorIpv4DestIpMaskThe specified IPv4 destination address mask. This object can only be
configured if FrameType is ipv4(4).rw IpAddress .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.409 |
me1200QosQceTableRowEditorIpv4SrcPortOpIndicates how a packet's source TCP/UDP port number is to be compared.
This object can only be configured if FrameType is ipv4(4).rw ME1200ASRType .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.410 |
me1200QosQceTableRowEditorIpv4SrcPortThe source port number of the TCP or UDP protocol. If the Ipv4SrcPortOp
object in the same row is range(2), this object will be the starting
port number of the port range. Valid range is 0-65535. This object can
only be configured if FrameType is ipv4(4) and Ipv4SrcPortOp is not
any(0).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.411 |
me1200QosQceTableRowEditorIpv4SrcPortRangeThe source port number of the TCP or UDP protocol. If the Ipv4SrcPortOp
object in the same row is range(2), this object will be the ending port
number of the port range. Valid range is 0-65535. This object can only
be configured if FrameType is ipv4(4) and Ipv4SrcPortOp is range(2).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.412 |
me1200QosQceTableRowEditorIpv4DestPortOpIndicates how a packet's destination TCP/UDP port number is to be
compared. This object can only be configured if FrameType is ipv4(4).rw ME1200ASRType .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.413 |
me1200QosQceTableRowEditorIpv4DestPortThe destination port number of the TCP or UDP protocol. If the
Ipv4DestPortOp object in the same row is range(2), this object will be
the starting port number of the port range. Valid range is 0-65535.
This object can only be configured if FrameType is ipv4(4) and
Ipv4DestPortOp is not any(0).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.414 |
me1200QosQceTableRowEditorIpv4DestPortRangeThe source port number of the TCP or UDP protocol. If the
Ipv4DestPortOp object in the same row is range(2), this object will be
the ending port number of the port range. Valid range is 0-65535. This
object can only be configured if FrameType is ipv4(4) and
Ipv4DestPortOp is range(2).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.415 |
me1200QosQceTableRowEditorIpv6DscpOpIndicates how an IPv6 DSCP field is to be compared. This object can
only be configured if FrameType is ipv6(5).rw ME1200ASRType .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.500 |
me1200QosQceTableRowEditorIpv6DscpThe DSCP value to be compared. If the Ipv6DscpOp object in the same row
is range(2), this object will be the starting DSCP value of the range.
Valid range is 0-63. This object can only be configured if FrameType is
ipv6(5) and Ipv6DscpOp is not any(0).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.501 |
me1200QosQceTableRowEditorIpv6DscpRangeThe DSCP value to be compared. If the Ipv6DscpOp object in the same row
is range(2), this object will be the ending DSCP value of the range.
Valid range is 0-63. This object can only be configured if FrameType is
ipv6(5) and Ipv6DscpOp is range(2).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.502 |
me1200QosQceTableRowEditorIpv6ProtocolThe protocol number field in the IPv6 header used to indicate a higher
layer protocol. The packets protocol number field is AND-ed with the
value of Ipv6ProtocolMask and then compared with the value of this
object. If Ipv46rotocol and Ipv6protocolMask are 0, this entry matches
any IPv6 protocol. Valid range is 0-255. This object can only be
configured if FrameType is ipv6(5).rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.503 |
me1200QosQceTableRowEditorIpv6ProtocolMaskThe specified IPv6 protocol number mask. Valid values are 0 or 255.
This object can only be configured if FrameType is ipv6(5).rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.504 |
me1200QosQceTableRowEditorIpv6SrcIpThe specified IPv6 source address. The packets source address is AND-ed
with the value of Ipv6SrcIpMask and then compared with the value of
this object. If Ipv6SrcIP and Ipv6SrcIpMask are all zeros, this entry
matches any IPv6 source address. Only the least significant 32 bits of
this object are used. This object can only be configured if FrameType
is ipv6(5).rw InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.506 |
me1200QosQceTableRowEditorIpv6SrcIpMaskThe specified IPv6 source address mask. Only the least significant 32
bits of this object are used. This object can only be configured if
FrameType is ipv6(5).rw InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.508 |
me1200QosQceTableRowEditorIpv6DestIpThe specified IPv6 destination address. The packets destination address
is AND-ed with the value of Ipv6DestIpMask and then compared with the
value of this object. If Ipv6DestIP and Ipv6DestIpMask are all zeros,
this entry matches any IPv6 destination address. Only the least
significant 32 bits of this object are used. This object can only be
configured if FrameType is ipv6(5).rw InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.510 |
me1200QosQceTableRowEditorIpv6DestIpMaskThe specified IPv6 destination address mask. Only the least significant
32 bits of this object are used. This object can only be configured if
FrameType is ipv6(5).rw InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.512 |
me1200QosQceTableRowEditorIpv6SrcPortOpIndicates how a packet's source TCP/UDP port number is to be compared.
This object can only be configured if FrameType is ipv6(5).rw ME1200ASRType .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.513 |
me1200QosQceTableRowEditorIpv6SrcPortThe source port number of the TCP or UDP protocol. If the Ipv6SrcPortOp
object in the same row is range(2), this object will be the starting
port number of the port range. Valid range is 0-65535. This object can
only be configured if FrameType is ipv6(5) and Ipv6SrcPortOp is not
any(0).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.514 |
me1200QosQceTableRowEditorIpv6SrcPortRangeThe source port number of the TCP or UDP protocol. If the Ipv6SrcPortOp
object in the same row is range(2), this object will be the ending port
number of the port range. Valid range is 0-65535. This object can only
be configured if FrameType is ipv6(5) and Ipv6SrcPortOp is range(2).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.515 |
me1200QosQceTableRowEditorIpv6DestPortOpIndicates how a packet's destination TCP/UDP port number is to be
compared. This object can only be configured if FrameType is ipv6(5).rw ME1200ASRType .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.516 |
me1200QosQceTableRowEditorIpv6DestPortThe destination port number of the TCP or UDP protocol. If the
Ipv6DestPortOp object in the same row is range(2), this object will be
the starting port number of the port range. Valid range is 0-65535.
This object can only be configured if FrameType is ipv6(5) and
Ipv6DestPortOp is not any(0).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.517 |
me1200QosQceTableRowEditorIpv6DestPortRangeThe source port number of the TCP or UDP protocol. If the
Ipv6DestPortOp object in the same row is range(2), this object will be
the ending port number of the port range. Valid range is 0-65535. This
object can only be configured if FrameType is ipv6(5) and
Ipv6DestPortOp is range(2).rw ME1200Unsigned16 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.518 |
me1200QosQceTableRowEditorActionCosEnableIf true, the packet is classified to the CoS value in ActionCos.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1000 |
me1200QosQceTableRowEditorActionCosThe CoS value used for classification. Valid range is 0-7.rw Unsigned32 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1001 |
me1200QosQceTableRowEditorActionDplEnableIf true, the packet is classified to the DPL value in ActionDpl.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1002 |
me1200QosQceTableRowEditorActionDplThe DPL value used for classification. Valid range is 0-1.rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1003 |
me1200QosQceTableRowEditorActionDscpEnableIf true, the packet is classified to the DSCP value in ActionDscp.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1004 |
me1200QosQceTableRowEditorActionDscpThe DSCP value used for classification. Valid range is 0-1.rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1005 |
me1200QosQceTableRowEditorActionPcpDeiEnableIf true, the packet is classified to the PCP value in ActionPcp and the
DEI value in ActionDei.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1006 |
me1200QosQceTableRowEditorActionPcpThe PCP value used for classification. Valid range is 0-7.rw Unsigned32 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1007 |
me1200QosQceTableRowEditorActionDeiThe DEI value used for classification. Valid range is 0-1.rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1008 |
me1200QosQceTableRowEditorActionPolicyEnableIf true, the packet is classified to the policy number in ActionPolicy.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1009 |
me1200QosQceTableRowEditorActionPolicyThe policy number used for classification. Valid range is 0-63.rw Unsigned32 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1010 |
me1200QosQceTableRowEditorActionActionrw ME1200RowEditorState (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.10000 |
me1200QosQcePrecedenceTableThis table contains the precedence of QCEs ordered by their position in
the QCL. SEQUENCE OF ME1200QosQcePrecedenceEntry .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.3 |
me1200QosQcePrecedenceEntryEach row contains the precedence of a single QCE. ME1200QosQcePrecedenceEntry .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.3.1 |
me1200QosQcePrecedenceIndexQCE precedence index. Indicates the position in QCL. Integer32 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.3.1.1 |
me1200QosQcePrecedenceQceIdQCE Id.ro Unsigned32 .1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.3.1.2 |
me1200QosInterface OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.14.1.2.2 |
me1200QosIfConfigTableThis table provides QoS configuration for QoS manageable interfaces SEQUENCE OF ME1200QosIfConfigEntry .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1 |
me1200QosIfConfigEntryEach row contains the configuration for a specific interface ME1200QosIfConfigEntry .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1 |
me1200QosIfConfigIfIndexLogical interface index. ME1200InterfaceIndex (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.1 |
me1200QosIfConfigCosThe default CoS value a packet is classified to. Valid range is 0-7.rw Unsigned32 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.2 |
me1200QosIfConfigDplThe default DPL (Drop Precedence Level) a packet is classified to.
Valid range is 0-1.rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.3 |
me1200QosIfConfigPcpThe default PCP value a packet is classified to. Valid range is 0-7.rw Unsigned32 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.4 |
me1200QosIfConfigDeiThe default DEI value a packet is classified to. Valid range is 0-1.rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.5 |
me1200QosIfConfigTrustTagIf true and the packet is VLAN tagged, then the CoS and DPL assigned to
the packet is the PCP and DEI value in the packet mapped to a CoS and
DPL value defined in the qosTagToCosTable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.6 |
me1200QosIfConfigTrustDscpIf true and the packet type is IPv4 or IPv6 and the packet DSCP value
is trusted in qosDscpTable, then the CoS and DPL assigned to the packet
is the DSCP value in the packet mapped to a CoS and DPL value defined
in the qosDscpTable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.7 |
me1200QosIfConfigDwrrCountThe number of queues that are running Deficit Weighted Round Robin
scheduling. This value is restricted to 0 or 6.rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.8 |
me1200QosIfConfigTagRemarkingModeSelects the tag remarking mode for egress. Valid values are:
'classified' : Remark the tag with the classified values of PCP and
DEI.
'default' : Remark the tag with the configured TagPcp and TagDei.
'mapped' : Remark the tag with the values from the classified CoS and
DPL mapped through the qosCosToTagTablerw ME1200TagRemarkingMode .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.9 |
me1200QosIfConfigTagPcpThe PCP value to put in the packet if TagRemarkingMode is set to
'default'. Valid range is 0-7.rw Unsigned32 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.10 |
me1200QosIfConfigTagDeiThe DEI value to put in the packet if TagRemarkingMode is set to
'default'. Valid range is 0-1.rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.11 |
me1200QosIfConfigDscpTranslateIf true then the classified DSCP value is the DSCP value in the packed
mapped to a new DSCP value defined in qosDscpTable.IngressTranslation.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.12 |
me1200QosIfConfigDscpClassifySelects if and how the classified DSCP is based on the classified CoS
and DPL for IPv4 and IPv6 packets on ingress.
If a packet is selected for being classified to a new DSCP, the
classification in based on the classified CoS mapped to a new DSCP
value through the qosCosToDscpTable. If the classified DPL is 1, the
new DSCP value is taken from the DscpDp1 entry, otherwise it is taken
from the Dscp entry. Valid values are:
'none' : Always classify to the DSCP value in the received packet and
ignore the classified CoS and DPL.
'zero' : If the DSCP value in the received packet is 0, then classify
to a new DSCP value based on the classified CoS and DPL.
'selected' : If the DSCP value in the received packet is enabled in
qosDscpTable.Classify, then classify to a new DSCP value based on the
classified CoS and DPL.
'all' : Always classify to a new DSCP value based on the classified CoS
and DPL.rw ME1200DscpClassify .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.13 |
me1200QosIfConfigDscpRemarkSelects if and how the classified DSCP is written into the packet at
egress. Valid values are:
'disabled' : Do not write the classified DSCP into the packet.
'rewrite' : Write the classified DSCP into the packet.
'remap' : Remap the classified DSCP through qosDscpTable, and write the
value from EgressTranslation into the packet.
'remap-dp' : Remap the classified DSCP through qosDscpTable. If the
classified DPL is 0 then write the value from EgressTranslation into
the packet, otherwise write the value from EgressTranslationDp1 into
the packet.rw ME1200DscpRemark .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.14 |
me1200QosIfConfigQceAddressModeIf false, the QCE classification for this interface is based on source
(SMAC/SIP) addresses. If true, the QCE classification for this
interface is based on destination (DMAC/DIP) addresses. This parameter
is only used when the QceKeyType is Normal.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.15 |
me1200QosIfConfigQceKeyTypeThe key type specifying the key generated for packets received on the
interface. Valid values are:
'normal' : Half key, match outer tag, SIP and SMAC.
'double-tag' : Quarter key, match inner and outer tag.
'ip-addr' : Half key, match inner and outer tag, SIP and DIP. For
non-IP frames, match outer tag only.
'mac-ip-addr' : Full key, match inner and outer tag, SMAC, DMAC, SIP
and DIP.
Filtering on DMAC type (unicast/multicast/broadcast) is supported for
any key type.rw ME1200VcapKeyType .1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.16 |
me1200QosIfTagToCosTableThis table contains the mapping of (interface, PCP, DEI) to (CoS, DPL)
values.The mappings given by this table is used for all tagged packets
received on an interface if and only if that interface has the value of
TrustTag set to 'true' SEQUENCE OF ME1200QosIfTagToCosEntry .1.3.6.1.4.1.9.9.815.1.14.1.2.2.2 |
me1200QosIfTagToCosEntryEach row contains the mapping from (interface, PCP, DEI) to (CoS, DPL)
values. ME1200QosIfTagToCosEntry .1.3.6.1.4.1.9.9.815.1.14.1.2.2.2.1 |
me1200QosIfTagToCosIfIndexLogical interface index. ME1200InterfaceIndex (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.2.2.1.1 |
me1200QosIfTagToCosPcpPCP index. Integer32 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.2.1.2 |
me1200QosIfTagToCosDeiDEI index. Integer32 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.2.1.3 |
me1200QosIfTagToCosCosThe CoS value which this entry maps to. Valid range is 0-7.rw Unsigned32 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.2.1.4 |
me1200QosIfTagToCosDplThe DPL (Drop Precedence Level) value which this entry maps to. Valid
range is 0-1.rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.2.2.1.5 |
me1200QosIfCosToTagTableThis table contains the mapping of (interface, CoS, DPL) to (PCP, DEI)
values.The mappings given by this table is used for packets transmitted
on an interface if and only if that interface has the value of
TagRemarkingMode set to 'mapped' SEQUENCE OF ME1200QosIfCosToTagEntry .1.3.6.1.4.1.9.9.815.1.14.1.2.2.3 |
me1200QosIfCosToTagEntryEach row contains the mapping from (interface, CoS, DPL) to (PCP, DEI)
values. ME1200QosIfCosToTagEntry .1.3.6.1.4.1.9.9.815.1.14.1.2.2.3.1 |
me1200QosIfCosToTagIfIndexLogical interface index. ME1200InterfaceIndex (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.2.3.1.1 |
me1200QosIfCosToTagCosCoS index. Integer32 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.3.1.2 |
me1200QosIfCosToTagDplDPL index. Integer32 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.3.1.3 |
me1200QosIfCosToTagPcpThe PCP value which this entry maps to. Valid range is 0-7.rw Unsigned32 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.3.1.4 |
me1200QosIfCosToTagDeiThe DEI value which this entry maps to. Valid range is 0-1.rw ME1200Unsigned8 (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.2.3.1.5 |
me1200QosIfPolicerTableThis table provides policer configuration for an interface SEQUENCE OF ME1200QosIfPolicerEntry .1.3.6.1.4.1.9.9.815.1.14.1.2.2.4 |
me1200QosIfPolicerEntryEach row contains the configuration for a specific policer ME1200QosIfPolicerEntry .1.3.6.1.4.1.9.9.815.1.14.1.2.2.4.1 |
me1200QosIfPolicerIfIndexLogical interface index. ME1200InterfaceIndex (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.2.4.1.1 |
me1200QosIfPolicerEnableIf true, the port policer is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.2.4.1.2 |
me1200QosIfPolicerFrameRateIf true, the rate is measured in fps instead of kbps.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.2.4.1.3 |
me1200QosIfPolicerFlowControlIf true, and flow control is enabled on the interface, then issue flow
control pause frames instead of discarding frames.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.2.4.1.4 |
me1200QosIfPolicerCirCommitted Information Rate. Measured in kbps if FrameRate is false and
fps if FrameRate is true. Valid range is 100-3300000.rw Unsigned32 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.4.1.5 |
me1200QosIfQueuePolicerTableThis table provides queue policer configuration for interfaces SEQUENCE OF ME1200QosIfQueuePolicerEntry .1.3.6.1.4.1.9.9.815.1.14.1.2.2.5 |
me1200QosIfQueuePolicerEntryEach row contains the configuration for a specific queue policer ME1200QosIfQueuePolicerEntry .1.3.6.1.4.1.9.9.815.1.14.1.2.2.5.1 |
me1200QosIfQueuePolicerIfIndexLogical interface index. ME1200InterfaceIndex (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.2.5.1.1 |
me1200QosIfQueuePolicerQueueQueue index. Integer32 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.5.1.2 |
me1200QosIfQueuePolicerEnableIf true, the queue policer is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.2.5.1.3 |
me1200QosIfQueuePolicerCirCommitted Information Rate. Measured in kbps. Valid range is
100-3300000.rw Unsigned32 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.5.1.6 |
me1200QosIfShaperTableThis table provides shaper configuration for an interface SEQUENCE OF ME1200QosIfShaperEntry .1.3.6.1.4.1.9.9.815.1.14.1.2.2.6 |
me1200QosIfShaperEntryEach row contains the configuration for a specific shaper ME1200QosIfShaperEntry .1.3.6.1.4.1.9.9.815.1.14.1.2.2.6.1 |
me1200QosIfShaperIfIndexLogical interface index. ME1200InterfaceIndex (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.2.6.1.1 |
me1200QosIfShaperEnableIf true, the port shaper is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.2.6.1.2 |
me1200QosIfShaperCirCommitted Information Rate. Measured in kbps. Valid range is
100-3300000.rw Unsigned32 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.6.1.3 |
me1200QosIfQueueShaperTableThis table provides queue shaper configuration for interfaces SEQUENCE OF ME1200QosIfQueueShaperEntry .1.3.6.1.4.1.9.9.815.1.14.1.2.2.7 |
me1200QosIfQueueShaperEntryEach row contains the configuration for a specific queue shaper ME1200QosIfQueueShaperEntry .1.3.6.1.4.1.9.9.815.1.14.1.2.2.7.1 |
me1200QosIfQueueShaperIfIndexLogical interface index. ME1200InterfaceIndex (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.2.7.1.1 |
me1200QosIfQueueShaperQueueQueue index. Integer32 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.7.1.2 |
me1200QosIfQueueShaperEnableIf true, the queue shaper is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.2.7.1.3 |
me1200QosIfQueueShaperExcessIf true, then allow this queue to get a share of the excess bandwidth.
Excess bandwidth is allowed if this shaper is closed and no other
queues with open shapers have frames for transmission.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.2.7.1.4 |
me1200QosIfQueueShaperCirCommitted Information Rate. Measured in kbps. Valid range is
100-3300000.rw Unsigned32 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.7.1.5 |
me1200QosIfSchedulerTableThis table contains the mapping of (interface, queue) to weight
values.The mappings given by this table is used when an interface has
the value of DwrrCount greater than 0. Read the qosSchedulerStatusTable
in order to get the 'real' weights in percent as used by the hardware SEQUENCE OF ME1200QosIfSchedulerEntry .1.3.6.1.4.1.9.9.815.1.14.1.2.2.8 |
me1200QosIfSchedulerEntryEach row contains the scheduler configuration for a specific queue. ME1200QosIfSchedulerEntry .1.3.6.1.4.1.9.9.815.1.14.1.2.2.8.1 |
me1200QosIfSchedulerIfIndexLogical interface index. ME1200InterfaceIndex (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.2.8.1.1 |
me1200QosIfSchedulerQueueQueue index. Integer32 .1.3.6.1.4.1.9.9.815.1.14.1.2.2.8.1.2 |
me1200QosIfSchedulerWeightThe weight for this queue. Valid range is 1-100.rw ME1200Percent (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.2.2.8.1.3 |
me1200QosStatus OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.14.1.3 |
me1200QosStatusGlobals OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.14.1.3.1 |
me1200QosStatusQceTableThis table contains the QCE status in the hardware table. SEQUENCE OF ME1200QosStatusQceEntry .1.3.6.1.4.1.9.9.815.1.14.1.3.1.1 |
me1200QosStatusQceEntryEach row contains the status of a single QCE. ME1200QosStatusQceEntry .1.3.6.1.4.1.9.9.815.1.14.1.3.1.1.1 |
me1200QosStatusQceIndexQCE precedence index. Indicates the position in QCL. Integer32 .1.3.6.1.4.1.9.9.815.1.14.1.3.1.1.1.2 |
me1200QosStatusQceUserIdUser Id.ro ME1200QceUserType .1.3.6.1.4.1.9.9.815.1.14.1.3.1.1.1.3 |
me1200QosStatusQceQceIdQCE Id.ro Unsigned32 .1.3.6.1.4.1.9.9.815.1.14.1.3.1.1.1.4 |
me1200QosStatusQceConflictIf true, a resource conflict is detected.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.3.1.1.1.100 |
me1200QosStatusInterface OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.14.1.3.2 |
me1200QosStatusIfTableThis table provides QoS status for QoS manageable interfaces SEQUENCE OF ME1200QosStatusIfEntry .1.3.6.1.4.1.9.9.815.1.14.1.3.2.1 |
me1200QosStatusIfEntryEach row contains the status for a specific interface ME1200QosStatusIfEntry .1.3.6.1.4.1.9.9.815.1.14.1.3.2.1.1 |
me1200QosStatusIfIfIndexLogical interface index. ME1200InterfaceIndex (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.3.2.1.1.1 |
me1200QosStatusIfCosSome subsystems are allowed to modify the default CoS value for an
interface. This object shows the actual default CoS value a packet is
classified to.ro Unsigned32 .1.3.6.1.4.1.9.9.815.1.14.1.3.2.1.1.2 |
me1200QosStatusIfSchedulerTableThis table contains the mapping of (interface, queue) to weight
values.The mappings given by this table are the 'real' weights in
percent as used by the hardware SEQUENCE OF ME1200QosStatusIfSchedulerEntry .1.3.6.1.4.1.9.9.815.1.14.1.3.2.2 |
me1200QosStatusIfSchedulerEntryEach row contains the scheduler status for a specific queue. ME1200QosStatusIfSchedulerEntry .1.3.6.1.4.1.9.9.815.1.14.1.3.2.2.1 |
me1200QosStatusIfSchedulerIfIndexLogical interface index. ME1200InterfaceIndex (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.3.2.2.1.1 |
me1200QosStatusIfSchedulerQueueQueue index. Integer32 .1.3.6.1.4.1.9.9.815.1.14.1.3.2.2.1.2 |
me1200QosStatusIfSchedulerWeightThe weight for this queue. Valid range is 1-100.ro ME1200Percent (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.14.1.3.2.2.1.3 |
me1200QosControl OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.14.1.4 |
me1200QosControlGlobals OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.14.1.4.1 |
me1200QosControlGlobalsConflictResolveSet to true to resolve resource conflicts.
If different components, such as ACEs, ECEs, VCEs, QCEs, competes for
the same resources in the switch, it is possible that some of resources
needed by one or more QCE are not available. These conflicts, if any,
are shown in the qosQceStatusTable.
To solve these conflicts, you must delete one or more of the competing
settings and set ConflictResolve to true. The switch will then reapply
the current QCE configuration.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.14.1.4.1.1 |
me1200QosMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.14.3 |
me1200QosMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.14.3.1 |
me1200QosMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.14.3.2 |