ME1200-LOOP-PROTECTION-MIB
Imported Objects
Objects
29 total| Object Name |
|---|
me1200LoopProtectionMibThis is a private MIB for loop protection MODULE-IDENTITY .1.3.6.1.4.1.9.9.815.1.91 |
me1200LoopProtectionObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.91.1 |
me1200LoopProtectionConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.91.1.2 |
me1200LoopProtectionGlobals OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.91.1.2.1 |
me1200LoopProtectionGlobalsEnabledGlobal enabled for loop protection on any port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.91.1.2.1.1 |
me1200LoopProtectionGlobalsTransmitIntervalPort transmission interval (seconds). Valid range: 1-10 seconds.rw Integer32 .1.3.6.1.4.1.9.9.815.1.91.1.2.1.2 |
me1200LoopProtectionGlobalsShutdownPeriodPort shutdown period (seconds). Valid range: 0 to 604800 seconds.rw Integer32 .1.3.6.1.4.1.9.9.815.1.91.1.2.1.3 |
me1200LoopProtectionConfigInterface OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.91.1.2.2 |
me1200LoopProtectionInterfaceParamTableThis is a table of loop protection interface parameters SEQUENCE OF ME1200LoopProtectionInterfaceParamEntry .1.3.6.1.4.1.9.9.815.1.91.1.2.2.1 |
me1200LoopProtectionInterfaceParamEntryEach physical interface has a set of parameters ME1200LoopProtectionInterfaceParamEntry .1.3.6.1.4.1.9.9.815.1.91.1.2.2.1.1 |
me1200LoopProtectionInterfaceParamIfIndexLogical interface number. ME1200InterfaceIndex (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.91.1.2.2.1.1.1 |
me1200LoopProtectionInterfaceParamEnabledEnabled loop protection on portrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.91.1.2.2.1.1.2 |
me1200LoopProtectionInterfaceParamActionAction if loop detectedrw ME1200LoopProtectionAction .1.3.6.1.4.1.9.9.815.1.91.1.2.2.1.1.3 |
me1200LoopProtectionInterfaceParamTransmitActively generate PDUsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.91.1.2.2.1.1.4 |
me1200LoopProtectionStatus OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.91.1.3 |
me1200LoopProtectionStatusInterface OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.91.1.3.2 |
me1200LoopProtectionInterfaceStatusTableThis is a table of loop protection interface status SEQUENCE OF ME1200LoopProtectionInterfaceStatusEntry .1.3.6.1.4.1.9.9.815.1.91.1.3.2.1 |
me1200LoopProtectionInterfaceStatusEntryEach physical interface has a set of status objects ME1200LoopProtectionInterfaceStatusEntry .1.3.6.1.4.1.9.9.815.1.91.1.3.2.1.1 |
me1200LoopProtectionInterfaceStatusIfIndexLogical interface number. ME1200InterfaceIndex (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.91.1.3.2.1.1.1 |
me1200LoopProtectionInterfaceStatusDisabledWhether a port is currently disabledro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.91.1.3.2.1.1.2 |
me1200LoopProtectionInterfaceStatusLoopDetectedWhether a port has a loop detectedro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.91.1.3.2.1.1.3 |
me1200LoopProtectionInterfaceStatusLoopCountNumber of times a loop has been detected on a portro Unsigned32 .1.3.6.1.4.1.9.9.815.1.91.1.3.2.1.1.4 |
me1200LoopProtectionInterfaceStatusLastLoopTime of last loop conditionro Integer32 .1.3.6.1.4.1.9.9.815.1.91.1.3.2.1.1.5 |
me1200LoopProtectionNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.91.1.4 |
me1200LoopProtectionNotification OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.91.1.4.0 |
me1200LoopProtectionNotificationLoopDetectedNotification is sent when a loop is detected. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.815.1.91.1.4.0.1 |
me1200LoopProtectionMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.91.2 |
me1200LoopProtectionMibCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.91.2.1 |
me1200LoopProtectionMibGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.91.2.2 |
More MIBs from Cisco
Browse all CiscoMIBs →The CISCO-ENTITY-VENDORTYPE-OID-MIB maps Cisco-specific hardware component identifiers to the ENTITY-MIB's entPhysicalTable, enabling precise differentiation of physical device types such as line cards, power supplies, and fans within Cisco infrastructure. This mapping ensures that SNMP management systems can accurately correlate physical inventory entries with vendor-specific component definitions for accurate device discovery and monitoring.
The CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB provides SNMP-based monitoring and management of Cisco Unified Computing System (UCS) hardware components, including chassis, blades, fabric interconnects, and power supplies. It exposes critical operational metrics such as device status, port states, temperature readings, fan speeds, and power consumption data for infrastructure health assessment.
The CISCO-UNIFIED-COMPUTING-ADAPTOR-MIB enables SNMP-based monitoring and management of physical and virtual network adapter interfaces, including link status, traffic counters, error statistics, and port configuration parameters, within the Cisco Unified Computing System (UCS) fabric interconnects and blade servers.
The CISCO-UNIFIED-COMPUTING-TC-MIB module defines standard textual conventions and data type definitions required for monitoring Cisco Unified Computing System (UCS) hardware components, including server blades, fabric interconnects, and chassis resources. These definitions enable consistent interpretation of specific UCS metrics such as power supply status, fan speeds, thermal readings, and port utilization across SNMP management applications.
The CISCO-UNIFIED-COMPUTING-FABRIC-MIB enables SNMP-based monitoring and management of the Cisco UCS Fabric Interconnects and associated fabric switching infrastructure, exposing metrics for port states, link utilization, error counters, and fabric topology status. It facilitates granular visibility into the physical and logical fabric layers, including uplink/downlink interfaces, VLAN configurations, and fabric failover conditions within the unified computing environment.
The STARENT-MIB module provides SNMP management and monitoring capabilities for Cisco ASR 5000 and ASR 5500 multimedia core platforms, specifically exposing metrics related to 2G/3G/4G and WiFi subscriber sessions, inline service states, and carrier-class high-availability status.