ME1200-DHCP-RELAY-MIB
AI MIB Summary
The ME1200-DHCP-RELAY-MIB enables monitoring and management of DHCP relay agent statistics, including interface binding states, packet forwarding counters, and relay agent information (Option 82) insertion status on Cisco ME1200 series Ethernet Services Access Modules. This private MIB extension provides visibility into the operational health and traffic flow of DHCP relay sessions specifically within the ME1200 hardware platform.
This is a private version of the DHCP Relay MIB
Main OID:
me1200DhcpRelayMIB.1.3.6.1.4.1.9.9.815.1.55
31
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
31 total| Object Name |
|---|
me1200DhcpRelayMIBThis is a private version of the DHCP Relay MIB MODULE-IDENTITY .1.3.6.1.4.1.9.9.815.1.55 |
me1200DhcpRelayMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.55.1 |
me1200DhcpRelayConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.55.1.2 |
me1200DhcpRelayGlobals OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.55.1.2.1 |
me1200DhcpRelayGlobalsModeGlobal mode of DHCP relay. true(1) is to enable DHCP relay and false(2)
is to disable it.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.55.1.2.1.1 |
me1200DhcpRelayGlobalsServerIpAddressServer IP address. This IP address is for DHCP server where the DHCP
relay will relay DHCP packets to.rw IpAddress .1.3.6.1.4.1.9.9.815.1.55.1.2.1.2 |
me1200DhcpRelayGlobalsInformationModeIndicates the DHCP relay information mode option operation. Possible
modes are - Enabled: Enable DHCP relay information mode operation. When
DHCP relay information mode operation is enabled, the agent inserts
specific information (option 82) into a DHCP message when forwarding to
DHCP server and removes it from a DHCP message when transferring to
DHCP client. It only works when DHCP relay operation mode is enabled.
Disabled: Disable DHCP relay information mode operation.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.55.1.2.1.3 |
me1200DhcpRelayGlobalsInformationPolicyIndicates the DHCP relay information option policy. When DHCP relay
information mode operation is enabled, if the agent receives a DHCP
message that already contains relay agent information it will enforce
the policy. The 'Replace' policy is invalid when relay information mode
is disabled.rw ME1200DhcpRelayInformationPolicyType .1.3.6.1.4.1.9.9.815.1.55.1.2.1.4 |
me1200DhcpRelayStatus OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.55.1.3 |
me1200DhcpRelayStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.55.1.3.1 |
me1200DhcpRelayStatisticsServerPacketsRelayedPackets relayed from server to client.ro Unsigned32 .1.3.6.1.4.1.9.9.815.1.55.1.3.1.1 |
me1200DhcpRelayStatisticsServerPacketErrorsErrors sending packets to servers.ro Unsigned32 .1.3.6.1.4.1.9.9.815.1.55.1.3.1.2 |
me1200DhcpRelayStatisticsClientPacketsRelayedPackets relayed from client to server.ro Unsigned32 .1.3.6.1.4.1.9.9.815.1.55.1.3.1.3 |
me1200DhcpRelayStatisticsClientPacketErrorsErrors sending packets to clients.ro Unsigned32 .1.3.6.1.4.1.9.9.815.1.55.1.3.1.4 |
me1200DhcpRelayStatisticsAgentOptionErrorsNumber of packets forwarded without agent options because there was no
room.ro Unsigned32 .1.3.6.1.4.1.9.9.815.1.55.1.3.1.5 |
me1200DhcpRelayStatisticsMissingAgentOptionNumber of packets dropped because no RAI option matching our ID was
found.ro Unsigned32 .1.3.6.1.4.1.9.9.815.1.55.1.3.1.6 |
me1200DhcpRelayStatisticsBadCircuitIdCircuit ID option in matching RAI option did not match any known
circuit ID.ro Unsigned32 .1.3.6.1.4.1.9.9.815.1.55.1.3.1.7 |
me1200DhcpRelayStatisticsMissingCircuitIdCircuit ID option in matching RAI option was missing.ro Unsigned32 .1.3.6.1.4.1.9.9.815.1.55.1.3.1.8 |
me1200DhcpRelayStatisticsBadRemoteIdRemote ID option in matching RAI option did not match any known remote
ID.ro Unsigned32 .1.3.6.1.4.1.9.9.815.1.55.1.3.1.9 |
me1200DhcpRelayStatisticsMissingRemoteIdRemote ID option in matching RAI option was missing.ro Unsigned32 .1.3.6.1.4.1.9.9.815.1.55.1.3.1.10 |
me1200DhcpRelayStatisticsReceiveServerPacketsReceive DHCP message from server.ro Unsigned32 .1.3.6.1.4.1.9.9.815.1.55.1.3.1.11 |
me1200DhcpRelayStatisticsReceiveClientPacketsReceive DHCP message from client.ro Unsigned32 .1.3.6.1.4.1.9.9.815.1.55.1.3.1.12 |
me1200DhcpRelayStatisticsReceiveClientAgentOptionReceive relay agent information option from client.ro Unsigned32 .1.3.6.1.4.1.9.9.815.1.55.1.3.1.13 |
me1200DhcpRelayStatisticsReplaceAgentOptionReplace relay agent information option.ro Unsigned32 .1.3.6.1.4.1.9.9.815.1.55.1.3.1.14 |
me1200DhcpRelayStatisticsKeepAgentOptionKeep relay agent information option.ro Unsigned32 .1.3.6.1.4.1.9.9.815.1.55.1.3.1.15 |
me1200DhcpRelayStatisticsDropAgentOptionDrop relay agent information option.ro Unsigned32 .1.3.6.1.4.1.9.9.815.1.55.1.3.1.16 |
me1200DhcpRelayControl OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.55.1.4 |
me1200DhcpRelayControlClearStatisticsThe action to clear statistics. true(1) is to clear the statistics
data. false(2), then, does nothing.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.55.1.4.1 |
me1200DhcpRelayMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.55.2 |
me1200DhcpRelayMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.55.2.1 |
me1200DhcpRelayMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.55.2.2 |