ME1200-ARP-INSPECTION-MIB
The ME1200-ARP-INSPECTION-MIB monitors Dynamic ARP Inspection (DAI) enforcement status, DHCP binding table synchronization, and violation counters on Cisco ME1200 series metro Ethernet switches. This private module tracks ARP packet validation failures, untrusted port states, and per-interface drop statistics to detect and mitigate ARP spoofing or poisoning attacks.
Imported Objects
Objects
47 total| Object Name |
|---|
me1200ArpInspectionMibThis is a private version of the ARP Inspection MIB MODULE-IDENTITY .1.3.6.1.4.1.9.9.815.1.63 |
me1200ArpInspectionMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.63.1 |
me1200ArpInspectionConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.63.1.2 |
me1200ArpInspectionGlobals OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.63.1.2.1 |
me1200ArpInspectionGlobalsAdminStateEnable/Disable the ARP Inspection global functionality.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.63.1.2.1.1 |
me1200ArpInspectionPortConfigTableThis is a table for managing ARP Inspection per port basis SEQUENCE OF ME1200ArpInspectionPortConfigEntry .1.3.6.1.4.1.9.9.815.1.63.1.2.2 |
me1200ArpInspectionPortConfigEntryEach port has a set of parameters ME1200ArpInspectionPortConfigEntry .1.3.6.1.4.1.9.9.815.1.63.1.2.2.1 |
me1200ArpInspectionPortConfigIfIndexLogical interface number of the physical port. ME1200InterfaceIndex (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.63.1.2.2.1.1 |
me1200ArpInspectionPortConfigModeEnable/Disable the ARP Inspection per-port functionality. Only when
both Global Mode and Port Mode on a given port are enabled, ARP
Inspection is enabled on this given port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.63.1.2.2.1.2 |
me1200ArpInspectionPortConfigCheckVlanEnable the ARP Inspection VLAN checking will log the inspected entries
by referring to arpInspectionVlanConfigTable setting. Disable the ARP
Inspection VLAN checking will log the inspected entries by referring to
arpInspectionPortConfigTable setting.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.63.1.2.2.1.3 |
me1200ArpInspectionPortConfigLogTypeThe capability to log the inspected entries per port basis. none(0)
will log nothing. deny(1) will log the denied entries. permit(2) will
log the permitted entries. all(3) will log all kinds of inspected
entries.rw ME1200ArpInspectionLogType .1.3.6.1.4.1.9.9.815.1.63.1.2.2.1.4 |
me1200ArpInspectionVlanConfigTableThis is a table for managing ARP Inspection per VLAN basis SEQUENCE OF ME1200ArpInspectionVlanConfigEntry .1.3.6.1.4.1.9.9.815.1.63.1.2.3 |
me1200ArpInspectionVlanConfigEntryEach VLAN has a set of parameters ME1200ArpInspectionVlanConfigEntry .1.3.6.1.4.1.9.9.815.1.63.1.2.3.1 |
me1200ArpInspectionVlanConfigVlanIdThe VID of the VLAN. Integer32 .1.3.6.1.4.1.9.9.815.1.63.1.2.3.1.1 |
me1200ArpInspectionVlanConfigLogTypeThe capability to log the inspected entries per VLAN basis. none(0)
will log nothing. deny(1) will log the denied entries. permit(2) will
log the permitted entries. all(3) will log all kinds of inspected
entries.rw ME1200ArpInspectionLogType .1.3.6.1.4.1.9.9.815.1.63.1.2.3.1.2 |
me1200ArpInspectionVlanConfigActionActionrw ME1200RowEditorState (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.63.1.2.3.1.100 |
me1200ArpInspectionVlanConfigTableRowEditor OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.63.1.2.4 |
me1200ArpInspectionVlanConfigTableRowEditorVlanIdThe VID of the VLAN.rw Integer32 .1.3.6.1.4.1.9.9.815.1.63.1.2.4.1 |
me1200ArpInspectionVlanConfigTableRowEditorLogTypeThe capability to log the inspected entries per VLAN basis. none(0)
will log nothing. deny(1) will log the denied entries. permit(2) will
log the permitted entries. all(3) will log all kinds of inspected
entries.rw ME1200ArpInspectionLogType .1.3.6.1.4.1.9.9.815.1.63.1.2.4.2 |
me1200ArpInspectionVlanConfigTableRowEditorActionActionrw ME1200RowEditorState (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.63.1.2.4.100 |
me1200ArpInspectionStaticConfigTableThis is a table for managing static ARP Inspection configuration SEQUENCE OF ME1200ArpInspectionStaticConfigEntry .1.3.6.1.4.1.9.9.815.1.63.1.2.5 |
me1200ArpInspectionStaticConfigEntryEach entry has a set of parameters ME1200ArpInspectionStaticConfigEntry .1.3.6.1.4.1.9.9.815.1.63.1.2.5.1 |
me1200ArpInspectionStaticConfigIfIndexLogical interface number of the physical port. ME1200InterfaceIndex (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.63.1.2.5.1.1 |
me1200ArpInspectionStaticConfigVlanIdThe VID of the VLAN. Integer32 .1.3.6.1.4.1.9.9.815.1.63.1.2.5.1.2 |
me1200ArpInspectionStaticConfigMacAddressAssigned MAC address. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.63.1.2.5.1.3 |
me1200ArpInspectionStaticConfigIpAddressAssigned IPv4 address. IpAddress .1.3.6.1.4.1.9.9.815.1.63.1.2.5.1.4 |
me1200ArpInspectionStaticConfigActionActionrw ME1200RowEditorState (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.63.1.2.5.1.100 |
me1200ArpInspectionStaticConfigTableRowEditor OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.63.1.2.6 |
me1200ArpInspectionStaticConfigTableRowEditorIfIndexLogical interface number of the physical port.rw ME1200InterfaceIndex (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.63.1.2.6.1 |
me1200ArpInspectionStaticConfigTableRowEditorVlanIdThe VID of the VLAN.rw Integer32 .1.3.6.1.4.1.9.9.815.1.63.1.2.6.2 |
me1200ArpInspectionStaticConfigTableRowEditorMacAddressAssigned MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.63.1.2.6.3 |
me1200ArpInspectionStaticConfigTableRowEditorIpAddressAssigned IPv4 address.rw IpAddress .1.3.6.1.4.1.9.9.815.1.63.1.2.6.4 |
me1200ArpInspectionStaticConfigTableRowEditorActionActionrw ME1200RowEditorState (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.63.1.2.6.100 |
me1200ArpInspectionStatus OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.63.1.3 |
me1200ArpInspectionDynamicAddressTableThis is a table for displaying all ARP Inspection entries SEQUENCE OF ME1200ArpInspectionDynamicAddressEntry .1.3.6.1.4.1.9.9.815.1.63.1.3.1 |
me1200ArpInspectionDynamicAddressEntryEach entry has a set of parameters ME1200ArpInspectionDynamicAddressEntry .1.3.6.1.4.1.9.9.815.1.63.1.3.1.1 |
me1200ArpInspectionDynamicAddressIfIndexLogical interface number of the physical port. ME1200InterfaceIndex (ME1200-TC) .1.3.6.1.4.1.9.9.815.1.63.1.3.1.1.1 |
me1200ArpInspectionDynamicAddressVlanIdThe VID of the VLAN. Integer32 .1.3.6.1.4.1.9.9.815.1.63.1.3.1.1.2 |
me1200ArpInspectionDynamicAddressMacAddressAssigned MAC address. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.63.1.3.1.1.3 |
me1200ArpInspectionDynamicAddressIpAddressAssigned IPv4 address. IpAddress .1.3.6.1.4.1.9.9.815.1.63.1.3.1.1.4 |
me1200ArpInspectionDynamicAddressTypeEither static(0) or dynamic(1) for the specific ARP entry.ro ME1200ArpInspectionRegisterStatus .1.3.6.1.4.1.9.9.815.1.63.1.3.1.1.5 |
me1200ArpInspectionControl OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.63.1.4 |
me1200ArpInspectionControlGlobals OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.63.1.4.1 |
me1200ArpInspectionControlGlobalsTranslateDynamicToStaticTo trigger the control action (only) when TRUE.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.815.1.63.1.4.1.1 |
me1200ArpInspectionMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.63.2 |
me1200ArpInspectionMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.63.2.1 |
me1200ArpInspectionMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.815.1.63.2.2 |
More MIBs from Cisco
Browse all CiscoMIBs →The CISCO-ENTITY-VENDORTYPE-OID-MIB maps Cisco-specific hardware component identifiers to the ENTITY-MIB's entPhysicalTable, enabling precise differentiation of physical device types such as line cards, power supplies, and fans within Cisco infrastructure. This mapping ensures that SNMP management systems can accurately correlate physical inventory entries with vendor-specific component definitions for accurate device discovery and monitoring.
The CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB provides SNMP-based monitoring and management of Cisco Unified Computing System (UCS) hardware components, including chassis, blades, fabric interconnects, and power supplies. It exposes critical operational metrics such as device status, port states, temperature readings, fan speeds, and power consumption data for infrastructure health assessment.
The CISCO-UNIFIED-COMPUTING-ADAPTOR-MIB enables SNMP-based monitoring and management of physical and virtual network adapter interfaces, including link status, traffic counters, error statistics, and port configuration parameters, within the Cisco Unified Computing System (UCS) fabric interconnects and blade servers.
The CISCO-UNIFIED-COMPUTING-TC-MIB module defines standard textual conventions and data type definitions required for monitoring Cisco Unified Computing System (UCS) hardware components, including server blades, fabric interconnects, and chassis resources. These definitions enable consistent interpretation of specific UCS metrics such as power supply status, fan speeds, thermal readings, and port utilization across SNMP management applications.
The CISCO-UNIFIED-COMPUTING-FABRIC-MIB enables SNMP-based monitoring and management of the Cisco UCS Fabric Interconnects and associated fabric switching infrastructure, exposing metrics for port states, link utilization, error counters, and fabric topology status. It facilitates granular visibility into the physical and logical fabric layers, including uplink/downlink interfaces, VLAN configurations, and fabric failover conditions within the unified computing environment.
The STARENT-MIB module provides SNMP management and monitoring capabilities for Cisco ASR 5000 and ASR 5500 multimedia core platforms, specifically exposing metrics related to 2G/3G/4G and WiFi subscriber sessions, inline service states, and carrier-class high-availability status.