LOOPBACK-DETECT-MIB
AI MIB Summary
The LOOPBACK-DETECT-MIB manages proprietary loopback detection mechanisms on network switches to identify and mitigate Layer 2 broadcast loops. It monitors port states and loopback conditions to trigger automatic port shutdowns or alerts, preventing broadcast storms and network instability.
The structure of loopback detection management for the proprietary enterprise.
Main OID:
swLoopDetectMIB.dlink-common-mgmt.41
24
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
24 total| Object Name |
|---|
swLoopDetectMIBThe structure of loopback detection management for the
proprietary enterprise. MODULE-IDENTITY .dlink-common-mgmt.41 |
swLoopDetectCtrl OBJECT IDENTIFIER .dlink-common-mgmt.41.1 |
swLoopDetectAdminStateThis object indicates the loopback detection status for the system.rw Enumeration .dlink-common-mgmt.41.1.1 |
swLoopDetectIntervalThis object indicates the interval value. The range is from 1 to 32767 seconds.rw INTEGER .dlink-common-mgmt.41.1.2 |
swLoopDetectRecoverTimeThis object indicates the recover time. The range is from 60 to 1000000.
The value of 0 disables the recover function.rw INTEGER .dlink-common-mgmt.41.1.3 |
swLoopDetectModeThis object indicates the loopback detection mode for the system.rw Enumeration .dlink-common-mgmt.41.1.4 |
swLoopDetectTrapModeThis object indicates the loopback detection trap mode for the system.rw Enumeration .dlink-common-mgmt.41.1.5 |
swLoopDetectLogStateThis object indicates the LBD log state.rw Enumeration .dlink-common-mgmt.41.1.6 |
swLoopDetectInfo OBJECT IDENTIFIER .dlink-common-mgmt.41.2 |
swLoopDetectPortMgmt OBJECT IDENTIFIER .dlink-common-mgmt.41.3 |
swLoopDetectPortTableThe table specifies the loopback detection function specified by port. SEQUENCE OF SwLoopDetectPortEntry .dlink-common-mgmt.41.3.1 |
swLoopDetectPortEntryThe table specifies the loopback detection function specified by port. SwLoopDetectPortEntry .dlink-common-mgmt.41.3.1.1 |
swLoopDetectPortIndexThis object indicates the module's port number. The range is from 1 to
the maximum port number specified in the modulero INTEGER .dlink-common-mgmt.41.3.1.1.1 |
swLoopDetectPortStateThis object indicates the loopback detection function state on the port.rw Enumeration .dlink-common-mgmt.41.3.1.1.2 |
swLoopDetectPortLoopVLANThis object indicates the VLAN list that has detected a loopback.ro DisplayString (SNMPv2-TC) .dlink-common-mgmt.41.3.1.1.3 |
swLoopDetectPortLoopStatusThis object indicates the port status.ro Enumeration .dlink-common-mgmt.41.3.1.1.4 |
swLoopDetectNotify OBJECT IDENTIFIER .dlink-common-mgmt.41.10 |
swLoopDetectNotifyPrefix OBJECT IDENTIFIER .dlink-common-mgmt.41.10.0 |
swPortLoopOccurredThe trap is sent when a port loop occurs. NOTIFICATION-TYPE .dlink-common-mgmt.41.10.0.1 |
swPortLoopRestartThe trap is sent when a port loop restarts after the interval time. NOTIFICATION-TYPE .dlink-common-mgmt.41.10.0.2 |
swVlanLoopOccurredThe trap is sent when a Port with a VID loop occurs. NOTIFICATION-TYPE .dlink-common-mgmt.41.10.0.3 |
swVlanLoopRestartThe trap is sent when a Port with a VID loop restarts after the interval time. NOTIFICATION-TYPE .dlink-common-mgmt.41.10.0.4 |
swLoopDetectNotificationBidings OBJECT IDENTIFIER .dlink-common-mgmt.41.10.1 |
swVlanLoopDetectVIDThis object indicates the VID that has detected a loopback.ro INTEGER .dlink-common-mgmt.41.10.1.1 |