LOGGING-MIB
This MIB provides objects to configure and display events logged on this system.
Main OID:
logging.1.3.6.1.4.1.7244.2.14
76
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
76 total| Object Name |
|---|
loggingThis MIB provides objects to configure and display events logged on this system. MODULE-IDENTITY .1.3.6.1.4.1.7244.2.14 |
agentLogConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.7244.2.14.1 |
agentLogInMemoryConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.7244.2.14.1.1 |
agentLogInMemoryAdminStatusAdministratively enable/disable the In Memory log.rw Enumeration .1.3.6.1.4.1.7244.2.14.1.1.1 |
agentLogInMemoryBehaviorConfigures the behavior of the In Memory Log when it becomes full. A value of wrap(1) will cause the oldest log message to be removed, making room for the new message. A value of stop-on-full(2) will prevent any further logging.rw Enumeration .1.3.6.1.4.1.7244.2.14.1.1.4 |
agentLogConsoleConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.7244.2.14.1.2 |
agentLogConsoleAdminStatusAdmin mode for console logsrw Enumeration .1.3.6.1.4.1.7244.2.14.1.2.1 |
agentLogConsoleSeverityFilterSeverity filter for console logsrw AgentLogSeverity .1.3.6.1.4.1.7244.2.14.1.2.2 |
agentLogSysLogConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.7244.2.14.1.4 |
agentLogSyslogAdminStatusFor Enabling and Disabling logging to configured syslog hosts. Setting this to disable stops logging to all syslog hosts.rw Enumeration .1.3.6.1.4.1.7244.2.14.1.4.1 |
agentLogSyslogLocalPortThis is the port on the local host from which syslog messages are sent.rw Unsigned32 .1.3.6.1.4.1.7244.2.14.1.4.3 |
agentLogSyslogMaxHostsMaximum number of hosts that can be configured for logging syslog messages.ro Unsigned32 .1.3.6.1.4.1.7244.2.14.1.4.4 |
agentLogSyslogHostTableSyslog host table containing syslog host entries. SEQUENCE OF AgentLogSyslogHostEntry .1.3.6.1.4.1.7244.2.14.1.4.5 |
agentLogSyslogHostEntrySyslog Host entry attributes. AgentLogSyslogHostEntry .1.3.6.1.4.1.7244.2.14.1.4.5.1 |
agentLogHostTableIndexIndex to syslog host entry in syslog host table. Unsigned32 .1.3.6.1.4.1.7244.2.14.1.4.5.1.1 |
agentLogHostTableIpAddressOrHostNameSyslog Host table IP Address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7244.2.14.1.4.5.1.2 |
agentLogHostTableTypeSyslog Host table Type.rw Enumeration .1.3.6.1.4.1.7244.2.14.1.4.5.1.3 |
agentLogHostTablePortSyslog Host table port number.rw Unsigned32 .1.3.6.1.4.1.7244.2.14.1.4.5.1.4 |
agentLogHostTableSeverityFilterConfigures the minimum severity that will be stored in the In Memory log.rw AgentLogSeverity .1.3.6.1.4.1.7244.2.14.1.4.5.1.5 |
agentLogHostTableRowStatusSyslog Host table row statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7244.2.14.1.4.5.1.7 |
agentLogSyslogSourceInterfaceA source-interface selection on an Interface Index (like vlan based routing interface, port based routing interface, loopback interface, tunnel interface). A non-zero value indicates ifIndex for the corresponding interface entry in the ifTable is selected. A zero value indicates the source-interface un-selection.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.7244.2.14.1.4.6 |
agentLogSyslogFacilityThis is the facility which is sent in syslog messages.rw AgentLogFacility .1.3.6.1.4.1.7244.2.14.1.4.7 |
agentLogCliCommandsConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.7244.2.14.1.5 |
agentLogCliCommandsAdminStatusAdministratively enable/disable the logging of the CLI Commandsrw Enumeration .1.3.6.1.4.1.7244.2.14.1.5.1 |
agentLogTerminalConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.7244.2.14.1.6 |
agentLogTerminalAdminStatusAdmin mode for terminal logsrw Enumeration .1.3.6.1.4.1.7244.2.14.1.6.1 |
agentLogTerminalSeverityFilterSeverity filter for terminal logsrw AgentLogSeverity .1.3.6.1.4.1.7244.2.14.1.6.2 |
agentLogEmailAlertConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.7244.2.14.1.10 |
agentLogEmailAdminStatusFor Enabling and Disabling email alerts to SMTP server. Setting this to disable stops emailing to SMTP servers.rw Enumeration .1.3.6.1.4.1.7244.2.14.1.10.1 |
agentLogEmailfromAddrSender Email Address. Maximum length is 255rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7244.2.14.1.10.2 |
agentLogEmaillogDurationThis duration in minutes determines how frequently the non critical messages are sent to the SMTP server.rw Unsigned32 .1.3.6.1.4.1.7244.2.14.1.10.3 |
agentLogEmailUrgentSeverityThis is the severity level for the critical log messagesrw AgentLogSeverity .1.3.6.1.4.1.7244.2.14.1.10.4 |
agentLogEmailNonUrgentSeverityThis is the severity level for the non critical log messages.rw AgentLogSeverity .1.3.6.1.4.1.7244.2.14.1.10.5 |
agentLogEmailTrapsSeverityThis is the severity level for Trap messages.rw AgentLogSeverity .1.3.6.1.4.1.7244.2.14.1.10.6 |
agentLogEmailToAddrTableThe (conceptual) table listing the destination email address and the message type. SEQUENCE OF AgentLogEmailToAddrEntry .1.3.6.1.4.1.7244.2.14.1.10.7 |
agentLogEmailToAddrEntryAn entry (conceptual row) in the agentLogEmailtoAddrTable. This entry shows what kind of messages go to the given destination email addresses. AgentLogEmailToAddrEntry .1.3.6.1.4.1.7244.2.14.1.10.7.1 |
agentLogEmailToAddrMessageTypeLog message Typero Enumeration .1.3.6.1.4.1.7244.2.14.1.10.7.1.1 |
agentLogEmailToAddrRecipient Email Address. Maximum length is 255ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7244.2.14.1.10.7.1.2 |
agentLogEmailToAddrEntryStatusThis is to create or delete the entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7244.2.14.1.10.7.1.3 |
agentLogEmailSubjectTableThe (conceptual) table listing the subject of the email and the message type. SEQUENCE OF AgentLogEmailSubjectEntry .1.3.6.1.4.1.7244.2.14.1.10.8 |
agentLogEmailSubjectEntryAn entry (conceptual row) in the agentLogEmailtoAddrTable. This entry shows what kind of subject to be used for the given message type. AgentLogEmailSubjectEntry .1.3.6.1.4.1.7244.2.14.1.10.8.1 |
agentLogEmailSubjectMessageTypeLog message Typero Enumeration .1.3.6.1.4.1.7244.2.14.1.10.8.1.1 |
agentLogEmailSubjectEmail Subject. Maximum length is 255. When this object is set to empty-string, it resets to factory default string.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7244.2.14.1.10.8.1.2 |
agentLogEmailSubjectEntryStatusThis is to create or delete the entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7244.2.14.1.10.8.1.3 |
agentLogEmailMailServerTableThe (conceptual) table listing the mail servers SEQUENCE OF AgentLogEmailMailServerEntry .1.3.6.1.4.1.7244.2.14.1.10.9 |
agentLogEmailMailServerEntryAn entry (conceptual row) in the agentLogEmailMailServerTable. This entry shows the conmfiguration for mail server. AgentLogEmailMailServerEntry .1.3.6.1.4.1.7244.2.14.1.10.9.1 |
agentLogEmailSmtpAddrTypeEmail SMTP Address typero InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7244.2.14.1.10.9.1.1 |
agentLogEmailSmtpAddrSMTP server Addressro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7244.2.14.1.10.9.1.2 |
agentLogEmailSmtpPortSMTP Port number. When this object is set to 0, it resets to factory default port number.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.7244.2.14.1.10.9.1.3 |
agentLogEmailSecurityThis is the authentication mechanism that should be used. Well known port for none security is 25, sslv3/tlsv1 is 465, and starttls is 587 or 25.rw Enumeration .1.3.6.1.4.1.7244.2.14.1.10.9.1.4 |
agentLogEmailloginIDThis user id is used while the switch/router is being authenticated by the SMTP server.The user ID should be minimum of 1 charcter to maximum of 32 characters.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7244.2.14.1.10.9.1.5 |
agentLogEmailPasswordThis password is used while the switch/router is being authenticated by the SMTP server.The password should be minimum of 1 character to maximum of 32 characters.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7244.2.14.1.10.9.1.6 |
agentLogEmailEntryStatusThis is to create or delete the entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7244.2.14.1.10.9.1.7 |
agentLogEmailUrgentAdminStatusFor Enabling and Disabling email urgent alerts to SMTP server. Setting this to disable stops urgent emailing to SMTP servers.rw Enumeration .1.3.6.1.4.1.7244.2.14.1.10.10 |
agentLogEmailNonUrgentAdminStatusFor Enabling and Disabling email non-urgent alerts to SMTP server. Setting this to disable stops non-urgent emailing to SMTP servers.rw Enumeration .1.3.6.1.4.1.7244.2.14.1.10.11 |
agentLogStatisticsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.7244.2.14.2 |
agentLogMessagesReceivedThe number of messages received by the log process. This includes messages that are dropped or ignored.ro Counter32 .1.3.6.1.4.1.7244.2.14.2.1 |
agentLogMessagesDroppedThe number of messages that could not be processed due to error or lack of resources.ro Counter32 .1.3.6.1.4.1.7244.2.14.2.2 |
agentLogSyslogMessagesRelayedThe number of messages forwarded by the syslog function to a syslog host. Messages forwarded to multiple hosts are counted once for each host.ro Counter32 .1.3.6.1.4.1.7244.2.14.2.3 |
agentLogSyslogMessagesIgnoredThe number of messages that were not processed by the syslog process because the component name or the priority level did not match any specification.rodeprecated Counter32 .1.3.6.1.4.1.7244.2.14.2.4 |
agentLogMessageReceivedTimeThe local time when a message was last received by the log subsystem specified as the number of non-leap seconds since 00:00:00 UTC on January 1 1970.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.7244.2.14.2.5 |
agentLogSyslogMessageDeliveredTimeThe local time when a message was last delivered to a syslog host specified as the number of non-leap seconds since 00:00:00 UTC on January 1 1970.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.7244.2.14.2.6 |
agentLogEmailAlertStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.7244.2.14.2.7 |
agentLogEmailStatsemailsSentCountThis is the count to show the no of emails sent so far.ro Counter32 .1.3.6.1.4.1.7244.2.14.2.7.1 |
agentLogEmailStatsemailsFailureCountThis is the count to show the no of emails failures happened so far...ro Counter32 .1.3.6.1.4.1.7244.2.14.2.7.2 |
agentLogEmailStatsTimeSinceLastEmailSentThis is the number of seconds since the last email was sent.ro Unsigned32 .1.3.6.1.4.1.7244.2.14.2.7.3 |
agentLogEmailStatsClearThis is to clear the email alert stats.rw Enumeration .1.3.6.1.4.1.7244.2.14.2.7.4 |
agentLogInMemoryGroup OBJECT IDENTIFIER .1.3.6.1.4.1.7244.2.14.3 |
agentLogInMemoryLogCountThe count of valid entries in the in-memory log.ro Gauge32 .1.3.6.1.4.1.7244.2.14.3.1 |
agentLogInMemoryTableThe in-memory log table containing sequence of in-memory log entries. SEQUENCE OF AgentLogInMemoryEntry .1.3.6.1.4.1.7244.2.14.3.2 |
agentLogInMemoryEntryAn individual message entry in in-memory log table. AgentLogInMemoryEntry .1.3.6.1.4.1.7244.2.14.3.2.1 |
agentLogInMemoryMsgIndexThe index to message entry in the in-memory log table. Unsigned32 .1.3.6.1.4.1.7244.2.14.3.2.1.1 |
agentLogInMemoryMsgTextMessage text info for inmemory logged messages.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7244.2.14.3.2.1.2 |
agentLogTrapsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.7244.2.14.5 |
agentLogEmailAlertTrapsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.7244.2.14.5.1 |
agentLogEmailSendFailedWhen ever a mail sending to the SMTP server is failed, this trap is sent with a count of how many times the connection to the SMTP server is failed so far. NOTIFICATION-TYPE .1.3.6.1.4.1.7244.2.14.5.1.1 |