IPV6-LOOPBACK-MIB
The IPV6-LOOPBACK-MIB enables Quanta hardware devices to monitor and configure IPv6 loopback interface addresses via SNMP, specifically tracking the operational status, IP address assignments, and administrative state of loopback interfaces.
Imported Objects
Objects
7 total| Object Name |
|---|
ipv6LoopbackThe Quanta Private MIB for Loopback IPV6 address configuration MODULE-IDENTITY .1.3.6.1.4.1.7244.2.23 |
agentLoopbackIpv6Group OBJECT IDENTIFIER .1.3.6.1.4.1.7244.2.23.1 |
agentLoopbackIpv6PrefixTableA table of the Ipv6 prefixes associated with loopback instances SEQUENCE OF AgentLoopbackIpv6PrefixEntry .1.3.6.1.4.1.7244.2.23.1.1 |
agentLoopbackIpv6PrefixEntry AgentLoopbackIpv6PrefixEntry .1.3.6.1.4.1.7244.2.23.1.1.1 |
agentLoopbackIpv6PrefixPrefixThe prefix associated with the loopback interface. The data type is used to model the Ipv6 address. It is a binary string of 16 octects in network byte-order. It specifies the IP address of loopback which will be in Ipv6 Format, generated using internal interface number. Ipv6AddressPrefix (IPV6-TC) .1.3.6.1.4.1.7244.2.23.1.1.1.1 |
agentLoopbackIpv6PrefixPrefixLenThe length of the prefix (in bits). InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.7244.2.23.1.1.1.2 |
agentLoopbackIpv6PrefixStatusStatus of this instance.Row can be added or deleted by setting the value to createAndGo/destroy active(1) - this Loopback instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instancerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7244.2.23.1.1.1.3 |
More MIBs from Quanta Computer
Browse all Quanta ComputerMIBs →The MULTICAST-MIB module provides standardized definitions for monitoring and managing multicast routing protocols and forwarding states, specifically tracking multicast group memberships, routing table entries, and interface-specific multicast traffic counters. It enables network administrators to verify the operational status of multicast distribution trees and diagnose forwarding anomalies across routers supporting the Multicast Routing Flex package.
SNMP MIB module
SNMP MIB module
The QUANTA-OPENFLOW-PRIVATE-MIB extends standard OpenFlow monitoring capabilities on Quanta Networks switches to expose vendor-specific private objects for tracking flow table statistics, controller connection states, and proprietary hardware resource utilization. This module enables granular visibility into the internal OpenFlow datapath and control plane operations specific to Quanta's switch architecture.
SNMP MIB module
The LOOPBACK-MIB facilitates the configuration and monitoring of IPv6 loopback interface addresses on Quanta hardware platforms. It exposes specific metrics for IPv6 loopback address status, prefix assignments, and interface operational states to enable precise network topology management.