LLDP-EXT-PNO-MIB
The LLDP Management Information Base extension module for PROFINET organizationally defined discovery information. Copyright (C) PROFIBUS Nutzerorganisation e.V. (2005).
Main OID:
lldpXPnoMIB.1.3.6.1.4.1.3320.127.1.5.3791
34
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
34 total| Object Name |
|---|
lldpXPnoMIBThe LLDP Management Information Base extension module
for PROFINET organizationally defined discovery information.
Copyright (C) PROFIBUS Nutzerorganisation e.V. (2005). MODULE-IDENTITY .1.3.6.1.4.1.3320.127.1.5.3791 |
lldpXPnoObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3320.127.1.5.3791.1 |
lldpXPnoConfig OBJECT IDENTIFIER .1.3.6.1.4.1.3320.127.1.5.3791.1.1 |
lldpXPnoConfigTableA table that controls selection of LLDP
TLVs to be transmitted on individual ports. SEQUENCE OF LldpXPnoConfigEntry .1.3.6.1.4.1.3320.127.1.5.3791.1.1.1 |
lldpXPnoConfigEntryLLDP configuration information that controls the
transmission of PNO organizationally defined TLVs
on LLDP transmission capable ports.
This configuration object augments the
lldpPortConfigEntry of the LLDP-MIB, therefore it
is only present along with the port configuration
defined by the associated lldpPortConfigEntry
entry.
Each active lldpXPnoConfigEntry must be restored
from non-volatile storage (along with the
corresponding
lldpPortConfigEntry) after a re-initialization of
the management system. LldpXPnoConfigEntry .1.3.6.1.4.1.3320.127.1.5.3791.1.1.1.1 |
lldpXPnoConfigSPDTxEnableThe lldpXPnoConfigSPDTxEnable, which is defined as
a truth value and configured by the network
management,
determines whether the PNO organizationally defined
signal propagation delay TLV transmission is
allowed on a given LLDP transmission capable port.
The signal propagation delay is composed of the
port transmission delay, the port receiving delay and
the line delay. These values can't be transmitted
independently of each other.
The value of this object must be restored from nonvolatile
storage after a re-initialization of the management
system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.3791.1.1.1.1.1 |
lldpXPnoConfigPortStatusTxEnableThe lldpXPnoConfigPortStatusTxEnable, which is
defined as a truth value and configured by the network
management, determines whether the PNO organizationally
defined RT port status TLV transmission is allowed on a
given LLDP transmission capable port.
The value of this object must be restored from nonvolatile
storage after a re-initialization of the management
system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.3791.1.1.1.1.2 |
lldpXPnoConfigAliasTxEnableThe lldpXPnoConfigAliasTxEnable, which is defined
as a truth value and configured by the network
management, determines whether the PNO organizationally
defined alias TLV (chassisId) transmission is allowed on a
given LLDP transmission capable port.
The value of this object must be restored from nonvolatile
storage after a re-initialization of the management
system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.3791.1.1.1.1.3 |
lldpXPnoConfigMrpTxEnableThe lldpXPnoConfigMrpTxEnable, which is defined as
a truth value and configured by the network
management, determines whether the PNO organizationally
defined MRP TLV transmission is allowed on a given
LLDP transmission capable port.
The value of this object must be restored from nonvolatile
storage after a re-initialization of the management system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.3791.1.1.1.1.4 |
lldpXPnoLocalData OBJECT IDENTIFIER .1.3.6.1.4.1.3320.127.1.5.3791.1.2 |
lldpXPnoLocTableThis table contains one row per port for PNO
organizationally defined LLDP extension on the
local system known to this agent. SEQUENCE OF LldpXPnoLocEntry .1.3.6.1.4.1.3320.127.1.5.3791.1.2.1 |
lldpXPnoLocEntryAdditional information about a particular port
component.
This object is indexed by the lldpLocPortNum
of the LLDP-MIB, therefore it is only present
along with the port entry defined by the
associated lldpLocPortEntry entry.
Each active lldpXPnoLocEntry must be restored
from non-volatile storage (along with the
corresponding lldpLocPortEntry) after a
re-initialization of the management system. LldpXPnoLocEntry .1.3.6.1.4.1.3320.127.1.5.3791.1.2.1.1 |
lldpXPnoLocLPDValueThis integer value represents the line propagation
delay in nanoseconds which was measured by the
local system on the corresponding port.
A value of zero shall be used if the system either
could not accomplish the measurement or does not
support such a measurement.ro Unsigned32 UNITS "ns" .1.3.6.1.4.1.3320.127.1.5.3791.1.2.1.1.1 |
lldpXPnoLocPortTxDValueThis integer value represents the PortTxDelay
in nanoseconds which was measured by the local
system on the corresponding port.
A value of zero shall be used if the system either
could not accomplish the measurement or does not
support such a measurement.ro Unsigned32 UNITS "ns" .1.3.6.1.4.1.3320.127.1.5.3791.1.2.1.1.2 |
lldpXPnoLocPortRxDValueThis integer value represents the PortRxDelay
in nanoseconds which was measured by the local
system on the corresponding port.
A value of zero shall be used if the system either
could not accomplish the measurement or does not
support such a measurement.ro Unsigned32 UNITS "ns" .1.3.6.1.4.1.3320.127.1.5.3791.1.2.1.1.3 |
lldpXPnoLocPortStatusRT2This value represents the status of the
corresponding port of the local system according to RT class 2.
A value of off(0) means that there isn't any RT2
capability available for this port. When the port
is configured for RT2 mode, but the mode isn't active
yet the value will be configured(1). If the RT2 mode is
configured for this port and the mode is active,
the value will be running(2).ro Enumeration .1.3.6.1.4.1.3320.127.1.5.3791.1.2.1.1.4 |
lldpXPnoLocPortStatusRT3This value represents the status of the corresponding
port of the local system according to RT class 3.
A value of off(0) means that there isn't any RT3
capability available for this port. When the port
is configured for RT3 mode, but the mode isn't active
yet the value will be configured(1).
When the port is ready for transmission and
reception of RT3 traffic, the port status will be running(4).ro Enumeration .1.3.6.1.4.1.3320.127.1.5.3791.1.2.1.1.5 |
lldpXPnoLocPortNoSThe local PROFINET NameofStation. If the station
isn't configured yet, the value of this object will be
the MAC address of the device as a string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.3791.1.2.1.1.6 |
lldpXPnoLocPortMrpUuIdThe UUID of the MRP domain to which this port
belongs to.
If the port doesn't belong to a MRP domain, the
value must be NIL ('0000000000000000').ro OCTET STRING .1.3.6.1.4.1.3320.127.1.5.3791.1.2.1.1.7 |
lldpXPnoLocPortMrrtStatusThis object reports the status of the MRRT entity
of the corresponding port.
A value of off(0) means that there isn't any MRRT
capability available for this port or it is
switched off.
The value configured(1) indicates that MRRT is
configured for the port.
When MRRT is active on the port, the value will be up(2).ro Enumeration .1.3.6.1.4.1.3320.127.1.5.3791.1.2.1.1.8 |
lldpXPnoRemoteData OBJECT IDENTIFIER .1.3.6.1.4.1.3320.127.1.5.3791.1.3 |
lldpXPnoRemTableThis table contains one or more rows per physical network
connection known to this agent. The agent may wish to
ensure that only one lldpXPnoRemEntry is present
for each local port, or it may choose to maintain
multiple lldpXPnoRemEntries for the same local port. SEQUENCE OF LldpXPnoRemEntry .1.3.6.1.4.1.3320.127.1.5.3791.1.3.1 |
lldpXPnoRemEntryEach entry represents the received information of the
communication partner on this physical connection.
The entries feature multiple indices from the
lldpRemEntry of the LLDP-MIB, therefore it is
only present along with the description defined
by the associated lldpRemEntry entry. LldpXPnoRemEntry .1.3.6.1.4.1.3320.127.1.5.3791.1.3.1.1 |
lldpXPnoRemLPDValueThis integer value represents the line propagation
delay in nanoseconds which was measured by the
remote system on the corresponding port.
A value of zero shall be used if the remote system
either could not accomplish the measurement or does not
support such a measurement.ro Unsigned32 UNITS "ns" .1.3.6.1.4.1.3320.127.1.5.3791.1.3.1.1.1 |
lldpXPnoRemPortTxDValueThis integer value represents the PortTxDelay in
nanoseconds which was measured by the remote
system on the corresponding port.
A value of zero shall be used if the remote system
either could not accomplish the measurement or does not
support such a measurement.ro Unsigned32 UNITS "ns" .1.3.6.1.4.1.3320.127.1.5.3791.1.3.1.1.2 |
lldpXPnoRemPortRxDValueThis integer value represents the PortRxDelay in
nanoseconds which was measured by the remote
system on the corresponding port.
A value of zero shall be used if the remote system
either could not accomplish the measurement or does not
support such a measurement.ro Unsigned32 UNITS "ns" .1.3.6.1.4.1.3320.127.1.5.3791.1.3.1.1.3 |
lldpXPnoRemPortStatusRT2This value represents the status of the corresponding
port of the remote system according to RT class 2.
A value of off(0) means that there isn't any RT2
capability available for this port. When the port
is configured for RT2 mode, but the mode isn't active
yet the value will be configured(1). If the RT2 mode is
configured for this port and the mode is active,
the value will be running(2).ro Enumeration .1.3.6.1.4.1.3320.127.1.5.3791.1.3.1.1.4 |
lldpXPnoRemPortStatusRT3This value represents the status of the corresponding
port of the remote system according to RT class 3.
A value of off(0) means that there isn't any RT3
capability available for this port. When the port
is configured for RT3 mode, but the mode isn't active
yet the value will be configured(1).
When the port is ready for transmission and reception
of RT3 traffic, the port status will be running(4).ro Enumeration .1.3.6.1.4.1.3320.127.1.5.3791.1.3.1.1.5 |
lldpXPnoRemPortNoSThe PROFINET NameofStation of the remote partner.
If the station isn't configured yet, the value of this
object will be the MAC address of the device as a string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.3791.1.3.1.1.6 |
lldpXPnoRemPortMrpUuIdThe UUID of the MRP domain to which the
corresponding port
of the remote system belongs to. If the port
doesn't belong
to a MRP domain, the value must be NIL
('0000000000000000').ro OCTET STRING .1.3.6.1.4.1.3320.127.1.5.3791.1.3.1.1.7 |
lldpXPnoRemPortMrrtStatusThis object reports the status of the MRRT entity
of the corresponding port.
A value of off(0) means that there isn't any MRRT
capability available for this port or it is
switched off.
The value configured(1) indicates that MRRT is
configured for the port. When MRRT is active on
the port, the value will be up(2).ro Enumeration .1.3.6.1.4.1.3320.127.1.5.3791.1.3.1.1.8 |
lldpXPnoConformance OBJECT IDENTIFIER .1.3.6.1.4.1.3320.127.1.5.3791.2 |
lldpXPnoCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.3320.127.1.5.3791.2.1 |
lldpXPnoGroups OBJECT IDENTIFIER .1.3.6.1.4.1.3320.127.1.5.3791.2.2 |