LLDP-EXT-HM-MIB
The LLDP Management Information Base extension module for Hirschmann organizationally defined discovery information. In order to assure the uniqueness of the LLDP-MIB, lldpXHmMIB is branched from lldpExtensions using the Hirschmann OUI value as the node. Copyright (C) 2008. All Rights Reserved.
Main OID:
lldpXHmMIB.1.3.6.1.4.1.3320.127.1.5.32867
69
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
69 total| Object Name |
|---|
lldpXHmMIBThe LLDP Management Information Base extension module for
Hirschmann organizationally defined discovery information.
In order to assure the uniqueness of the LLDP-MIB,
lldpXHmMIB is branched from lldpExtensions using the Hirschmann
OUI value as the node.
Copyright (C) 2008. All Rights Reserved. MODULE-IDENTITY .1.3.6.1.4.1.3320.127.1.5.32867 |
lldpXHmObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3320.127.1.5.32867.1 |
lldpXHmConfig OBJECT IDENTIFIER .1.3.6.1.4.1.3320.127.1.5.32867.1.1 |
lldpXHmConfigGMRPTableA table that controls GMRP LLDP TLV Information
to be transmitted on individual ports. SEQUENCE OF LldpXHmConfigGMRPEntry .1.3.6.1.4.1.3320.127.1.5.32867.1.1.1 |
lldpXHmConfigGMRPEntryLLDP configuration information that controls the
transmission of Hirschmann GMRP organizationally defined Configuration
TLV on LLDP transmission capable ports.
This configuration object augments the lldpPortConfigEntry of
the LLDP-MIB, therefore it is only present along with the port
configuration defined by the associated lldpPortConfigEntry
entry.
Each active lldpConfigEntry must be restored from non-volatile
storage (along with the corresponding lldpPortConfigEntry)
after a re-initialization of the management system. LldpXHmConfigGMRPEntry .1.3.6.1.4.1.3320.127.1.5.32867.1.1.1.1 |
lldpXHmConfigGMRPTxEnableThe lldpXHmConfigGMRPTxEnable, which is defined as
a truth value and configured by the network management,
determines whether the Hirschmann GMRP organizationally defined
port TLV transmission is allowed on a given LLDP
transmission capable port.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.32867.1.1.1.1.1 |
lldpXHmConfigIGMPTableA table that controls IGMP LLDP TLV Information
to be transmitted on individual ports. SEQUENCE OF LldpXHmConfigIGMPEntry .1.3.6.1.4.1.3320.127.1.5.32867.1.1.2 |
lldpXHmConfigIGMPEntryLLDP configuration information that controls the
transmission of Hirschmann IGMP organizationally defined Configuration
TLV on LLDP transmission capable ports.
This configuration object augments the lldpPortConfigEntry of
the LLDP-MIB, therefore it is only present along with the port
configuration defined by the associated lldpPortConfigEntry
entry.
Each active lldpConfigEntry must be restored from non-volatile
storage (along with the corresponding lldpPortConfigEntry)
after a re-initialization of the management system. LldpXHmConfigIGMPEntry .1.3.6.1.4.1.3320.127.1.5.32867.1.1.2.1 |
lldpXHmConfigIGMPTxEnableThe lldpXHmConfigIGMPTxEnable, which is defined as
a truth value and configured by the network management,
determines whether the Hirschmann IGMP organizationally defined
port TLV transmission is allowed on a given LLDP
transmission capable port.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.32867.1.1.2.1.1 |
lldpXHmConfigPortSecTableA table that controls 802.1X Port Security LLDP TLV Information
to be transmitted on individual ports. SEQUENCE OF LldpXHmConfigPortSecEntry .1.3.6.1.4.1.3320.127.1.5.32867.1.1.3 |
lldpXHmConfigPortSecEntryLLDP configuration information that controls the
transmission of Hirschmann 802.1X Port Security organizationally
defined Configuration TLV on LLDP transmission capable ports.
This configuration object augments the lldpPortConfigEntry of
the LLDP-MIB, therefore it is only present along with the port
configuration defined by the associated lldpPortConfigEntry
entry.
Each active lldpConfigEntry must be restored from non-volatile
storage (along with the corresponding lldpPortConfigEntry)
after a re-initialization of the management system. LldpXHmConfigPortSecEntry .1.3.6.1.4.1.3320.127.1.5.32867.1.1.3.1 |
lldpXHmConfigPortSecTxEnableThe lldpXHmConfigPortSecTxEnable, which is defined as
a truth value and configured by the network management,
determines whether the Hirschmann 802.1X Port Security
organizationally defined port TLV transmission is allowed
on a given LLDP transmission capable port.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.32867.1.1.3.1.1 |
lldpXHmConfigPTPTableA table that controls PTP LLDP TLV Information
to be transmitted on individual ports. SEQUENCE OF LldpXHmConfigPTPEntry .1.3.6.1.4.1.3320.127.1.5.32867.1.1.4 |
lldpXHmConfigPTPEntryLLDP configuration information that controls the
transmission of Hirschmann PTP organizationally defined Configuration
TLV on LLDP transmission capable ports.
This configuration object augments the lldpPortConfigEntry of
the LLDP-MIB, therefore it is only present along with the port
configuration defined by the associated lldpPortConfigEntry
entry.
Each active lldpConfigEntry must be restored from non-volatile
storage (along with the corresponding lldpPortConfigEntry)
after a re-initialization of the management system. LldpXHmConfigPTPEntry .1.3.6.1.4.1.3320.127.1.5.32867.1.1.4.1 |
lldpXHmConfigPTPTxEnableThe lldpXHmConfigPTPTxEnable, which is defined as
a truth value and configured by the network management,
determines whether the Hirschmann PTP organizationally defined
port TLV transmission is allowed on a given LLDP
transmission capable port.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.32867.1.1.4.1.1 |
lldpXHmLocalData OBJECT IDENTIFIER .1.3.6.1.4.1.3320.127.1.5.32867.1.2 |
lldpXHmLocGMRPTableThis table contains one or more rows per Port and GMRP
information about each port of the local system.
GMRP is a protocol used for constraining IP Multicast traffic
defined by the IEEE in standard 802.1p, published in standard 802.1D SEQUENCE OF LldpXHmLocGMRPEntry .1.3.6.1.4.1.3320.127.1.5.32867.1.2.1 |
lldpXHmLocGMRPEntryGMRP Information about a particular
port component. LldpXHmLocGMRPEntry .1.3.6.1.4.1.3320.127.1.5.32867.1.2.1.1 |
lldpXHmLocGMRPSupportThe truth value used to indicate whether the given port
(associated with the local system) supports GMRP.
If this is set to (false), all following fields should be
set to not applicable and should not be evaluated.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.32867.1.2.1.1.1 |
lldpXHmLocGMRPStatusThe truth value used to indicate whether GMRP
is enabled on the the given port associated with the local system.
If this is set to (false), all following fields should be
set to not applicable and should not be evaluated.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.32867.1.2.1.1.2 |
lldpXHmLocGMRPServiceReqInteger value, used to indicate which GMRP service requirement
is enabled on the the given port associated with the local system.ro LldpXHmLocGMRPServiceReqSyntax .1.3.6.1.4.1.3320.127.1.5.32867.1.2.1.1.3 |
lldpXHmLocIGMPTableThis table contains one or more rows per Port and IGMP
information about each port of the local system.
IGMP is a protocol used for constraining IP multicast traffic
specified in IETF RFCs 1112, 2236(IGMPv2) and 3376(IGMPv3) SEQUENCE OF LldpXHmLocIGMPEntry .1.3.6.1.4.1.3320.127.1.5.32867.1.2.2 |
lldpXHmLocIGMPEntryIGMP Information about a particular
port component. LldpXHmLocIGMPEntry .1.3.6.1.4.1.3320.127.1.5.32867.1.2.2.1 |
lldpXHmLocIGMPSupportThe truth value used to indicate whether the given port
(associated with the local system) supports IGMP.
If this is set to (false), all following fields should be
set to not applicable and should not be evaluated.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.32867.1.2.2.1.1 |
lldpXHmLocIGMPStatusThe truth value used to indicate whether IGMP is enabled
on the the given port associated with the local system.
If this is set to (false), all following fields should be
set to not applicable and should not be evaluated.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.32867.1.2.2.1.2 |
lldpXHmLocIGMPVersionThis bitmap shows which IGMP version is configured on the local device.ro LldpXHmLocIGMPVersionSyntax .1.3.6.1.4.1.3320.127.1.5.32867.1.2.2.1.3 |
lldpXHmLocPortSecTableThis table contains one or more rows per Port and
802.1X Port Security information about each port of
the local system.
IEEE 802.1X Port Security is a standard, defining rules for
a port based network access control with a client/supplicant
requesting access to the network from an authenticator/RADIUS server SEQUENCE OF LldpXHmLocPortSecEntry .1.3.6.1.4.1.3320.127.1.5.32867.1.2.3 |
lldpXHmLocPortSecEntry802.1X Port Security Information about a particular
port component. LldpXHmLocPortSecEntry .1.3.6.1.4.1.3320.127.1.5.32867.1.2.3.1 |
lldpXHmLocPortSecSupportThe truth value used to indicate whether the given port
(associated with the local system) supports 802.1X Port Security.
If this is set to (false), all following fields should be
set to not applicable and should not be evaluated.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.32867.1.2.3.1.1 |
lldpXHmLocPortSecStatusThe truth value used to indicate whether 802.1X Port Security
is enabled on the the given port associated with the local system.
If this is set to (false), all following fields should be
set to not applicable and should not be evaluated.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.32867.1.2.3.1.2 |
lldpXHmLocPortSecModeThis Integer value contains informations about a local ports 802.1X
configuration.ro LldpXHmLocPortSecModeSyntax .1.3.6.1.4.1.3320.127.1.5.32867.1.2.3.1.3 |
lldpXHmLocPTPTableThis table contains one or more rows per Port and PTP
information about the local system.
The Precision Time Protocol (PTP) is defined in IEEE Standard 1588
and describes a protocol for network (system) clock synchronization
with very high precision. SEQUENCE OF LldpXHmLocPTPEntry .1.3.6.1.4.1.3320.127.1.5.32867.1.2.4 |
lldpXHmLocPTPEntryPort and PTP Information about a particular
port component LldpXHmLocPTPEntry .1.3.6.1.4.1.3320.127.1.5.32867.1.2.4.1 |
lldpXHmLocPTPSupportThis bitmap shows which PTP versions are supported by the local system, based on installed hardwarero LldpXHmLocPTPSupportSyntax .1.3.6.1.4.1.3320.127.1.5.32867.1.2.4.1.1 |
lldpXHmLocPTPStatusThis bitmap shows which PTP versions are enabled on the local systemro LldpXHmLocPTPStatusSyntax .1.3.6.1.4.1.3320.127.1.5.32867.1.2.4.1.2 |
lldpXHmLocPTPSyncIntervalThis Integer shows the PTPv1 and PTPv2 Synchronization Interval.
If no PTP is available or configured, this value should be set to -128.ro Integer32(-128..127) .1.3.6.1.4.1.3320.127.1.5.32867.1.2.4.1.3 |
lldpXHmLocPTPv2AnnounceIntervalThis Integer shows the PTPv2 Announce Interval. If PTPv2 is not
configured or available, this should be set to -128.ro Integer32(-128..127) .1.3.6.1.4.1.3320.127.1.5.32867.1.2.4.1.4 |
lldpXHmLocPTPv2DataTransferThis Integer shows the enabled PTPv2 data transfer method.ro LldpXHmLocPTPv2DataTransferSyntax .1.3.6.1.4.1.3320.127.1.5.32867.1.2.4.1.5 |
lldpXHmLocPTPv2DelayMechanismThis Integer shows the enabled PTPv2 delay mechanismro LldpXHmLocPTPv2DelayMechanismSyntax .1.3.6.1.4.1.3320.127.1.5.32867.1.2.4.1.6 |
lldpXHmLocPTPClockValuesThis bitmap shows, which clock type(s) are configured
on a specific port and/or device:
Bit (0) set to 1 indicates a slave clock
Bit (1) set to 1 indicates a master clock
Bit (2) set to 1 indicates a transparent clock
Bit (3) set to 1 indicates a boundary clock
Bit (4) set to 1 indicates a grandmaster clock
Bit (5) set to 1 indicates a clock in multi domain mode
Bit (6) set to 1 indicates a clock in simple mode
If no PTP is configured, all bits should be set to 0.ro Bits .1.3.6.1.4.1.3320.127.1.5.32867.1.2.4.1.7 |
lldpXHmLocPTPv2SubdomainNumberThis Integer shows the PTPv2 subdomain number configured on the local device.
In case PTPv1 is configured, this value is of no relevance and will not be evaluated.ro Integer32 .1.3.6.1.4.1.3320.127.1.5.32867.1.2.4.1.8 |
lldpXHmLocPTPv1SubdomainNameThis Octet String contains the PTPv1 subdomain name, an ASCII String
with a maximum of 16 characters length, configured on the local
device.
If PTPv2 or no PTP is configured, this should be set to 0.ro OCTET STRING .1.3.6.1.4.1.3320.127.1.5.32867.1.2.4.1.9 |
lldpXHmRemoteData OBJECT IDENTIFIER .1.3.6.1.4.1.3320.127.1.5.32867.1.3 |
lldpXHmRemGMRPTableThis table contains one or more rows per Port and GMRP
information about the remote system.
GMRP is a protocol used for constraining IP Multicast traffic
defined by the IEEE in standard 802.1p, published in standard 802.1D SEQUENCE OF LldpXHmRemGMRPEntry .1.3.6.1.4.1.3320.127.1.5.32867.1.3.1 |
lldpXHmRemGMRPEntryGMRP Information about a particular
port component. LldpXHmRemGMRPEntry .1.3.6.1.4.1.3320.127.1.5.32867.1.3.1.1 |
lldpXHmRemGMRPSupportThe truth value used to indicate whether the given port
(associated with the remote system) supports GMRP.
If this is set to (false), all following fields should be
set to not applicable and should not be evaluated.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.32867.1.3.1.1.1 |
lldpXHmRemGMRPStatusThe truth value used to indicate whether GMRP is enabled on the
the given port associated with the remote system.
If this is set to (false), all following fields should be
set to not applicable and should not be evaluated.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.32867.1.3.1.1.2 |
lldpXHmRemGMRPServiceReqInteger value, used to indicate which GMRP service requirement
is enabled on the the given port associated with the remote system.ro LldpXHmRemGMRPServiceReqSyntax .1.3.6.1.4.1.3320.127.1.5.32867.1.3.1.1.3 |
lldpXHmRemIGMPTableThis table contains one or more rows per Port and IGMP
information about each port of the remote system.
IGMP is a protocol used for constraining IP multicast traffic
specified in IETF RFCs 1112, 2236(IGMPv2) and 3376(IGMPv3) SEQUENCE OF LldpXHmRemIGMPEntry .1.3.6.1.4.1.3320.127.1.5.32867.1.3.2 |
lldpXHmRemIGMPEntryIGMP Information about a particular
port component. LldpXHmRemIGMPEntry .1.3.6.1.4.1.3320.127.1.5.32867.1.3.2.1 |
lldpXHmRemIGMPSupportThe truth value used to indicate whether the given port
(associated with the remote system) supports IGMP.
If this is set to (false), all following fields should be
set to not applicable and should not be evaluated.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.32867.1.3.2.1.1 |
lldpXHmRemIGMPStatusThe truth value used to indicate whether IGMP is enabled on
the the given port associated with the remote system.
If this is set to (false), all following fields should be
set to not applicable and should not be evaluated.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.32867.1.3.2.1.2 |
lldpXHmRemIGMPVersionThis bitmap shows which IGMP version is configured on the remote device.ro LldpXHmRemIGMPVersionSyntax .1.3.6.1.4.1.3320.127.1.5.32867.1.3.2.1.3 |
lldpXHmRemPortSecTableThis table contains one or more rows per Port and
802.1X Port Security information about each port of
the remote system.
IEEE 802.1X Port Security is a standard, defining rules for
a port based network access control with a client/supplicant
requesting access to the network from an authenticator/RADIUS server SEQUENCE OF LldpXHmRemPortSecEntry .1.3.6.1.4.1.3320.127.1.5.32867.1.3.3 |
lldpXHmRemPortSecEntry802.1X Port Security Information about a particular
port component. LldpXHmRemPortSecEntry .1.3.6.1.4.1.3320.127.1.5.32867.1.3.3.1 |
lldpXHmRemPortSecSupportThe truth value used to indicate whether the given port
(associated with the remote system) supports 802.1X Port Security.
If this is set to (false), all following fields should be
set to not applicable and should not be evaluated.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.32867.1.3.3.1.1 |
lldpXHmRemPortSecStatusThe truth value used to indicate whether 802.1X Port Security
is enabled on the the given port associated with the remote system.
If this is set to (false), all following fields should be
set to not applicable and should not be evaluated.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3320.127.1.5.32867.1.3.3.1.2 |
lldpXHmRemPortSecModeThis Integer value contains informations about a remote ports 802.1X
configuration.ro LldpXHmRemPortSecModeSyntax .1.3.6.1.4.1.3320.127.1.5.32867.1.3.3.1.3 |
lldpXHmRemPTPTableThis table contains one or more rows per Port and PTP
information about the remote system.
The Precision Time Protocol (PTP) is defined in IEEE Standard 1588
and describes a protocol for network (system) clock synchronization
with very high precision. SEQUENCE OF LldpXHmRemPTPEntry .1.3.6.1.4.1.3320.127.1.5.32867.1.3.4 |
lldpXHmRemPTPEntryPort and PTP Information about a particular
port component LldpXHmRemPTPEntry .1.3.6.1.4.1.3320.127.1.5.32867.1.3.4.1 |
lldpXHmRemPTPSupportShows which PTP versions are supported by the remote system, based on installed hardwarero LldpXHmRemPTPSupportSyntax .1.3.6.1.4.1.3320.127.1.5.32867.1.3.4.1.1 |
lldpXHmRemPTPStatusShows which PTP versions are enabled on the remote systemro LldpXHmRemPTPStatusSyntax .1.3.6.1.4.1.3320.127.1.5.32867.1.3.4.1.2 |
lldpXHmRemPTPSyncIntervalShows the PTPv1 and PTPv2 Synchronization Interval.
If no PTP is available or configured, this value should be set to -128.ro Integer32(-128..127) .1.3.6.1.4.1.3320.127.1.5.32867.1.3.4.1.3 |
lldpXHmRemPTPv2AnnounceIntervalShows the PTPv2 Announce Interval. If PTPv2 is not
configured or available, this should be set to -128.ro Integer32(-128..127) .1.3.6.1.4.1.3320.127.1.5.32867.1.3.4.1.4 |
lldpXHmRemPTPv2DataTransferThis field is only viable if PTPv2 is enabled. It shows the data transfer
type configured on the remote port and device.ro LldpXHmRemPTPv2DataTransferSyntax .1.3.6.1.4.1.3320.127.1.5.32867.1.3.4.1.5 |
lldpXHmRemPTPv2DelayMechanismShows the enabled PTPv2 delay mechanismro LldpXHmRemPTPv2DelayMechanismSyntax .1.3.6.1.4.1.3320.127.1.5.32867.1.3.4.1.6 |
lldpXHmRemPTPClockValuesShows, which clock type(s) are configured on a specific remote port
and/or device:
Bit (0) set to 1 indicates a slave clock
Bit (1) set to 1 indicates a master clock
Bit (2) set to 1 indicates a transparent clock
Bit (3) set to 1 indicates a boundary clock
Bit (4) set to 1 indicates a grandmaster clock
Bit (5) set to 1 indicates a clock in multi domain mode
Bit (6) set to 1 indicates a clock in simple mode
If no PTP is configured, all bits should be set to 0.ro Bits .1.3.6.1.4.1.3320.127.1.5.32867.1.3.4.1.7 |
lldpXHmRemPTPv2SubdomainNumberShows the PTPv2 subdomain number configured on the remote device.
In case PTPv1 is configured, this value is of no relevance and will not be evaluated.ro Integer32 .1.3.6.1.4.1.3320.127.1.5.32867.1.3.4.1.8 |
lldpXHmRemPTPv1SubdomainNameThis Octet String contains the PTPv1 subdomain name, an ASCII String
with a maximum of 16 characters length, configured on the remote device.
If PTPv2 is configured, this field should be set to 0.ro OCTET STRING .1.3.6.1.4.1.3320.127.1.5.32867.1.3.4.1.9 |