LIVINGSTON-PM-GLOBAL-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for LIVINGSTON-PM-GLOBAL-MIB.
38
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
38 total| Object Name |
|---|
lucentPMGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.307.1.2.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.307.1.2.1 |
lucentPMGenGlobParams OBJECT IDENTIFIER .1.3.6.1.4.1.307.1.2.1.1 |
lucentPMGenPriNameSrvrThe primary name server address. The name server allows the
machines to be accessed using names instead of the IP addresses.rw IpAddress .1.3.6.1.4.1.307.1.2.1.1.1 |
lucentPMGenAltNameSrvrThe alternate name server address. The alternate name server
takes the responsibilities of the primary name server when the
primary name server stops responding.rw IpAddress .1.3.6.1.4.1.307.1.2.1.1.3 |
lucentPMGenSyslogHostThe host IP address where the syslog messages are sent.rw IpAddress .1.3.6.1.4.1.307.1.2.1.1.4 |
lucentPMGenAssignedAddrThe starting address for a pool of consecutive temporary
addresses to be allocated by the PortMaster. This setting
enables network login users to use IP addresses from this
pool.rw IpAddress .1.3.6.1.4.1.307.1.2.1.1.5 |
lucentPMGenReportedAddrThe IP address different from ether0 interface address
which is reported to the outside world during PPP or
SLIP protocol negotiation. Use this feature, if your
site should appear as a single IP address site.rw IpAddress .1.3.6.1.4.1.307.1.2.1.1.6 |
lucentPMGenNetMaskThe user netmask allows the PortMaster to add routes to
dial-in users based on the netmask specified in the netmask
object. This seting affects the routing and proxy ARP.rw Enumeration .1.3.6.1.4.1.307.1.2.1.1.7 |
lucentPMGenNameSvcName service specifies the type of name resolution service used.
The possible values are domain name service dns(2) or network
information service nis(3). If either of them is not used, then
the value of the object is none(1).rw Enumeration .1.3.6.1.4.1.307.1.2.1.1.8 |
lucentPMGenDomainNameDomain name of the system. Example xxxxxxx.com, yyyyyyyy.org,
zzzzzzzz.edu or ppppppppp.net etc.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.307.1.2.1.1.9 |
lucentPMGenTelnetPortNumTelnet port number.rw INTEGER .1.3.6.1.4.1.307.1.2.1.1.10 |
lucentPMGenMaxConsConnMaximum number of console connections.rw INTEGER .1.3.6.1.4.1.307.1.2.1.1.11 |
lucentPMGenOSPFEnable or disable Open Shortest Path First routing
algorithm.rw Enumeration .1.3.6.1.4.1.307.1.2.1.1.12 |
lucentPMGenBGPEnable or disable Border Gateway Protocol.rw Enumeration .1.3.6.1.4.1.307.1.2.1.1.13 |
lucentPMGenIPXEnable or disable IPX Protocol.rw Enumeration .1.3.6.1.4.1.307.1.2.1.1.14 |
lucentPMGenNetBIOSEnable or disable NetBIOS Protocol.rw Enumeration .1.3.6.1.4.1.307.1.2.1.1.15 |
lucentPMGenCallCheckEnable or disable RADIUS authentication before an
ISDN PRI call is accepted. You must configure the
RADIUS user entries for this option to work.rw Enumeration .1.3.6.1.4.1.307.1.2.1.1.16 |
lucentPMRadiusMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.307.1.2.1.2 |
lucentPMRadiusPriIPThe IP address of the primary RADIUS server.rw IpAddress .1.3.6.1.4.1.307.1.2.1.2.1 |
lucentPMRadiusAltIPThe alternate IP address of the RADIUS server.rw IpAddress .1.3.6.1.4.1.307.1.2.1.2.2 |
lucentPMRadiusPriAcctIPThe IP address of the primary RADIUS accounting server.rw IpAddress .1.3.6.1.4.1.307.1.2.1.2.3 |
lucentPMRadiusAltAcctIPThe IP address of the RADIUS alternate accounting
server.rw IpAddress .1.3.6.1.4.1.307.1.2.1.2.4 |
lucentPMRadiusPriPortThe port number for the primary RADIUS server.rw INTEGER .1.3.6.1.4.1.307.1.2.1.2.5 |
lucentPMRadiusAltPortThe port number for the alternate RADIUS server.rw INTEGER .1.3.6.1.4.1.307.1.2.1.2.6 |
lucentPMRadiusPriAcctPortThe port number for the primary RADIUS accounting server.rw INTEGER .1.3.6.1.4.1.307.1.2.1.2.7 |
lucentPMRadiusAltAcctPortThe port number for the alternate RADIUS accounting
server.rw IpAddress .1.3.6.1.4.1.307.1.2.1.2.8 |
lucentPMRadiusAuthFailsThe number of radius authentication failures.ro Counter .1.3.6.1.4.1.307.1.2.1.2.9 |
lucentPMRadiusRetransThe maximum number of times a timeout will occur when
communicating with radius.rw INTEGER .1.3.6.1.4.1.307.1.2.1.2.10 |
lucentPMRadiusTimeoutThe maximum amount of time in seconds we will wait
for a RADIUS response before retransmitting.rw INTEGER .1.3.6.1.4.1.307.1.2.1.2.11 |
lucentPMRadiusAuthIs radius authentication on or off.rw Enumeration .1.3.6.1.4.1.307.1.2.1.2.12 |
lucentPMRadiusSecretThe shared secret between the RADIUS server and client.rw OCTET STRING .1.3.6.1.4.1.307.1.2.1.2.13 |
lucentPMChoiceNetMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.307.1.2.1.3 |
lucentPMChoiceNetPriIPThe IP address of the primary ChoiceNet server.rw IpAddress .1.3.6.1.4.1.307.1.2.1.3.1 |
lucentPMChoiceNetAltIPThe alternate IP address of the ChoiceNet server.rw IpAddress .1.3.6.1.4.1.307.1.2.1.3.2 |
lucentPMChoiceNetPriPortThe port number of the primary ChoiceNet server.rw INTEGER .1.3.6.1.4.1.307.1.2.1.3.3 |
lucentPMChoiceNetAltPortThe port number of the alternate ChoiceNet server.rw INTEGER .1.3.6.1.4.1.307.1.2.1.3.4 |
lucentPMChoiceNetSecretThe shared secret between the ChoiceNet server and client.rw OCTET STRING .1.3.6.1.4.1.307.1.2.1.3.5 |