LISP-MIB
This MIB module contains managed objects to support monitoring devices that support the Locator/ID Separation Protocol (LISP). Copyright (c) 2013 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info).
Main OID:
lispMIB.1.3.6.1.2.1.220
172
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
172 total| Object Name |
|---|
lispMIBThis MIB module contains managed objects to support monitoring devices that support the Locator/ID Separation Protocol (LISP). Copyright (c) 2013 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). MODULE-IDENTITY .1.3.6.1.2.1.220 |
lispObjects OBJECT IDENTIFIER .1.3.6.1.2.1.220.1 |
lispFeaturesTableThis table represents the ON/OFF status of the various LISP features that can be enabled on LISP devices. SEQUENCE OF LispFeaturesEntry .1.3.6.1.2.1.220.1.1 |
lispFeaturesEntryAn entry (conceptual row) in the lispFeaturesTable. LispFeaturesEntry .1.3.6.1.2.1.220.1.1.1 |
lispFeaturesInstanceIDThis represents the Instance ID of the LISP header. An Instance ID in the LISP address encoding helps uniquely identify the AFI-based address space to which a given EID belongs. Its default value is 0. Unsigned32 .1.3.6.1.2.1.220.1.1.1.1 |
lispFeaturesAddressFamilyThe IANA Address Family Number of destination address of packets that this LISP device is enabled to process. AddressFamilyNumbers (IANA-ADDRESS-FAMILY-NUMBERS-MIB) .1.3.6.1.2.1.220.1.1.1.2 |
lispFeaturesItrEnabledIndicates the status of ITR role on this device. If this object is true, then the ITR feature is enabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.220.1.1.1.3 |
lispFeaturesEtrEnabledIndicates the status of ETR role on this device. If this object is true, then the ETR feature is enabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.220.1.1.1.4 |
lispFeaturesProxyItrEnabledIndicates the status of Proxy-ITR role on this device. If this object is true, then the Proxy-ITR feature is enabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.220.1.1.1.5 |
lispFeaturesProxyEtrEnabledIndicates the status of Proxy-ETR role on this device. If this object is true, then the Proxy-ETR feature is enabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.220.1.1.1.6 |
lispFeaturesMapServerEnabledIndicates the status of Map Server role on this device. If this object is true, then the Map-Server feature is enabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.220.1.1.1.7 |
lispFeaturesMapResolverEnabledIndicates the status of Map Resolver role on this device. If this object is true, then Map-Resolver feature is enabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.220.1.1.1.8 |
lispFeaturesMapCacheSizeSize of EID-to-RLOC map-cache on this device.ro Unsigned32 .1.3.6.1.2.1.220.1.1.1.9 |
lispFeaturesMapCacheLimitMaximum permissible entries in EID-to-RLOC map-cache on this device.ro Unsigned32 .1.3.6.1.2.1.220.1.1.1.10 |
lispFeaturesEtrMapCacheTtlThe stored Record TTL of the EID-to-RLOC map record in the map-cache.ro Unsigned32 .1.3.6.1.2.1.220.1.1.1.11 |
lispFeaturesRlocProbeEnabledIndicates the status of RLOC-Probing feature on this device. If this object is true, then this feature is enabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.220.1.1.1.12 |
lispFeaturesEtrAcceptMapDataEnabledIndicates the status of accepting piggybacked mapping data received in a map-request on this device. If this object is true, then this device accepts piggybacked mapping data.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.220.1.1.1.13 |
lispFeaturesEtrAcceptMapDataVerifyEnabledIndicates the status of verifying accepted piggybacked mapping data received in a map-request on this device. If this object is true, then this device verifies accepted piggybacked mapping data.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.220.1.1.1.14 |
lispFeaturesRouterTimeStampThe value of sysUpTime at which the LISP feature was enabled on this device. If this information was present at the most recent reinitialization of the local management subsystem, then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.2.1.220.1.1.1.15 |
lispIidToVrfTableThis table represents the mapping of a LISP Instance ID to a VRF. SEQUENCE OF LispIidToVrfEntry .1.3.6.1.2.1.220.1.2 |
lispIidToVrfEntryAn entry (conceptual row) in the lispIidToVrfTable. LispIidToVrfEntry .1.3.6.1.2.1.220.1.2.1 |
lispIidToVrfNameThe identifier for each VPN that is mapped to the given LISP Instance ID.ro MplsL3VpnName (MPLS-L3VPN-STD-MIB) .1.3.6.1.2.1.220.1.2.1.1 |
lispGlobalStatsTableThis table provides global statistics for a given Instance ID per address family on a LISP device. SEQUENCE OF LispGlobalStatsEntry .1.3.6.1.2.1.220.1.3 |
lispGlobalStatsEntryAn entry (conceptual row) in the lispGlobalStatsTable. LispGlobalStatsEntry .1.3.6.1.2.1.220.1.3.1 |
lispGlobalStatsMapRequestsInTotal number of map requests received by this device for any EID-Prefix of the given address family and Instance ID. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of LISP features being removed, which can be detected by observing the value of lispFeaturesRouterTimeStamp.ro Counter64 .1.3.6.1.2.1.220.1.3.1.1 |
lispGlobalStatsMapRequestsOutTotal number of map requests sent by this device for any EID-Prefix of the given address family and Instance ID. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of LISP features being removed, which can be detected by observing the value of lispFeaturesRouterTimeStamp.ro Counter64 .1.3.6.1.2.1.220.1.3.1.2 |
lispGlobalStatsMapRepliesInTotal number of map replies received by this device for any EID-Prefix of the given address family and Instance ID. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of LISP features being removed, which can be detected by observing the value of lispFeaturesRouterTimeStamp.ro Counter64 .1.3.6.1.2.1.220.1.3.1.3 |
lispGlobalStatsMapRepliesOutTotal number of map replies sent by this device for any EID prefix of the given address family and Instance ID. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of LISP features being removed, which can be detected by observing the value of lispFeaturesRouterTimeStamp.ro Counter64 .1.3.6.1.2.1.220.1.3.1.4 |
lispGlobalStatsMapRegistersInTotal number of map registers received by this device for any EID-Prefix of the given address family and Instance ID. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of LISP features being removed, which can be detected by observing the value of lispFeaturesRouterTimeStamp.ro Counter64 .1.3.6.1.2.1.220.1.3.1.5 |
lispGlobalStatsMapRegistersOutTotal number of map registers sent by this device for any EID-Prefix of the given address family and Instance ID. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of LISP features being removed, which can be detected by observing the value of lispFeaturesRouterTimeStamp.ro Counter64 .1.3.6.1.2.1.220.1.3.1.6 |
lispMappingDatabaseTableThis table represents the EID-to-RLOC mapping database that contains the EID-Prefix to RLOC mappings configured on an ETR. This table represents all such mappings for the given LISP site to which this device belongs. SEQUENCE OF LispMappingDatabaseEntry .1.3.6.1.2.1.220.1.4 |
lispMappingDatabaseEntryAn entry (conceptual row) in lispMappingDatabaseTable. LispMappingDatabaseEntry .1.3.6.1.2.1.220.1.4.1 |
lispMappingDatabaseEidLengthThis object gives the octet-length of lispMappingDatabaseEid. Integer32 .1.3.6.1.2.1.220.1.4.1.1 |
lispMappingDatabaseEidThe EID-Prefix of the mapping database. LispAddressType .1.3.6.1.2.1.220.1.4.1.2 |
lispMappingDatabaseLsbThe locator status bits for this EID-Prefix.ro Unsigned32 .1.3.6.1.2.1.220.1.4.1.3 |
lispMappingDatabaseEidPartitionedIndicates if this device is partitioned from the site that contains this EID-Prefix. If this object is true, then it means this device is partitioned from the site.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.220.1.4.1.4 |
lispMappingDatabaseTimeStampThe value of sysUpTime at which the EID Prefix information represented by this mapping database entry was configured on this device. If this information was present at the most recent reinitialization of the local management subsystem, then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.2.1.220.1.4.1.5 |
lispMappingDatabaseDecapOctetsThe number of octets, after decapsulation, of LISP packets that were decapsulated by this device addressed to a host within this EID-Prefix. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of LISP features being removed, which can be detected by observing the value of lispMappingDatabaseTimeStamp.ro Counter64 .1.3.6.1.2.1.220.1.4.1.6 |
lispMappingDatabaseDecapPacketsThe number of LISP packets that were decapsulated by this device addressed to a host within this EID-Prefix. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of LISP features being removed, which can be detected by observing the value of lispMappingDatabaseTimeStamp.ro Counter64 .1.3.6.1.2.1.220.1.4.1.7 |
lispMappingDatabaseEncapOctetsThe number of octets, before encapsulation, of LISP packets that were encapsulated by this device, whose inner header source address matched this EID-Prefix. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of LISP features being removed, which can be detected by observing the value of lispMappingDatabaseTimeStamp.ro Counter64 .1.3.6.1.2.1.220.1.4.1.8 |
lispMappingDatabaseEncapPacketsThe number of LISP packets that were encapsulated by this device whose inner header source address matched this EID prefix. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of LISP features being removed, which can be detected by observing the value of lispMappingDatabaseTimeStamp.ro Counter64 .1.3.6.1.2.1.220.1.4.1.9 |
lispMappingDatabaseLocatorTableThis table represents the set of routing locators per EID prefix contained in the EID-to-RLOC database configured on this ETR. SEQUENCE OF LispMappingDatabaseLocatorEntry .1.3.6.1.2.1.220.1.5 |
lispMappingDatabaseLocatorEntryAn entry (conceptual row) in the lispMappingDatabaseLocatorTable. LispMappingDatabaseLocatorEntry .1.3.6.1.2.1.220.1.5.1 |
lispMappingDatabaseLocatorRlocLengthThis object is used to get the octet-length of lispMappingDatabaseLocatorRloc. Integer32 .1.3.6.1.2.1.220.1.5.1.1 |
lispMappingDatabaseLocatorRlocThis object is a locator for the given EID-Prefix in the mapping database. LispAddressType .1.3.6.1.2.1.220.1.5.1.2 |
lispMappingDatabaseLocatorRlocPriorityThe unicast priority of the RLOC.ro Integer32 .1.3.6.1.2.1.220.1.5.1.3 |
lispMappingDatabaseLocatorRlocWeightThe unicast weight of the RLOC.ro Integer32 .1.3.6.1.2.1.220.1.5.1.4 |
lispMappingDatabaseLocatorRlocMPriorityThe multicast priority of the RLOC.ro Integer32 .1.3.6.1.2.1.220.1.5.1.5 |
lispMappingDatabaseLocatorRlocMWeightThe multicast weight of the RLOC.ro Integer32 .1.3.6.1.2.1.220.1.5.1.6 |
lispMappingDatabaseLocatorRlocStateThe state of this RLOC as per this device. (1 = RLOC is up; 2 = RLOC is down; 3 = RLOC is unreachable).ro Enumeration .1.3.6.1.2.1.220.1.5.1.7 |
lispMappingDatabaseLocatorRlocLocalIndicates whether the RLOC is local to this device (or remote, meaning local to another device in the same LISP site). (1 = RLOC is an address on this device; 2 = RLOC is an address on another device).ro Enumeration .1.3.6.1.2.1.220.1.5.1.8 |
lispMappingDatabaseLocatorRlocTimeStampThe value of sysUpTime at which the RLOC of the EID Prefix represented by this mapping database entry was configured on this device. If this information was present at the most recent reinitialization of the local management subsystem, then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.2.1.220.1.5.1.9 |
lispMappingDatabaseLocatorRlocDecapOctetsThe number of octets of LISP packets that were addressed to this RLOC of the EID-Prefix and were decapsulated. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of database mappings getting reconfigured or RLOC status changes, which can be detected by observing the value of lispMappingDatabaseLocatorRlocTimeStamp.ro Counter64 .1.3.6.1.2.1.220.1.5.1.10 |
lispMappingDatabaseLocatorRlocDecapPacketsThe number of LISP packets that were addressed to this RLOC of the EID-Prefix and were decapsulated. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of database mappings getting reconfigured or RLOC status changes, which can be detected by observing the value of lispMappingDatabaseLocatorRlocTimeStamp.ro Counter64 .1.3.6.1.2.1.220.1.5.1.11 |
lispMappingDatabaseLocatorRlocEncapOctetsThe number of octets of LISP packets that were encapsulated by this device using this RLOC address as the source, and that were sourced by an address of this EID-Prefix. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of database mappings getting reconfigured or RLOC status changes, which can be detected by observing the value of lispMappingDatabaseLocatorRlocTimeStamp.ro Counter64 .1.3.6.1.2.1.220.1.5.1.12 |
lispMappingDatabaseLocatorRlocEncapPacketsThe number of LISP packets that were encapsulated by this device using this RLOC address as the source and that were sourced by an address of this EID-Prefix. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of database mappings getting reconfigured or RLOC status changes, which can be detected by observing the value of lispMappingDatabaseLocatorRlocTimeStamp.ro Counter64 .1.3.6.1.2.1.220.1.5.1.13 |
lispMapCacheTableThis table represents the short-lived, on-demand table on an ITR that stores, tracks, and is responsible for timing-out and otherwise validating EID-to-RLOC mappings. SEQUENCE OF LispMapCacheEntry .1.3.6.1.2.1.220.1.6 |
lispMapCacheEntryAn entry (conceptual row) in the lispMapCacheTable. LispMapCacheEntry .1.3.6.1.2.1.220.1.6.1 |
lispMapCacheEidLengthThis object is used to get the octet-length of lispMapCacheEid. Integer32 .1.3.6.1.2.1.220.1.6.1.1 |
lispMapCacheEidThe EID-Prefix in the mapping cache. LispAddressType .1.3.6.1.2.1.220.1.6.1.2 |
lispMapCacheEidTimeStampThe value of sysUpTime at which the EID Prefix information represented by this entry was learned by this device. If this information was present at the most recent reinitialization of the local management subsystem, then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.2.1.220.1.6.1.3 |
lispMapCacheEidExpiryTimeThe time remaining before the ITR times-out this EID-Prefix.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.2.1.220.1.6.1.4 |
lispMapCacheEidStateThis object is used to indicate the activity of this EID prefix. If this object is true, then it means this EID prefix is seeing activity.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.220.1.6.1.5 |
lispMapCacheEidAuthoritativeThis object is used to indicate whether the EID-Prefix was installed by an authoritative map-reply. If this object is true, then it means this EID-Prefix was installed by an authoritative map-reply.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.220.1.6.1.6 |
lispMapCacheEidDecapOctetsThe number of octets of LISP packets that were decapsulated by this device and were sourced from a remote host within this EID-Prefix. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of cache being removed and replaced, which can be detected by observing the value of lispMapCacheEidTimeStamp.ro Counter64 .1.3.6.1.2.1.220.1.6.1.7 |
lispMapCacheEidDecapPacketsThe number of LISP packets that were decapsulated by this device and were sourced from a remote host within this EID-Prefix. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of cache being removed and replaced, which can be detected by observing the value of lispMapCacheEidTimeStamp.ro Counter64 .1.3.6.1.2.1.220.1.6.1.8 |
lispMapCacheEidEncapOctetsThe number of octets of LISP packets that were encapsulated by this device using the given EID-Prefix in the map-cache. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of cache being removed and replaced, which can be detected by observing the value of lispMapCacheEidTimeStamp.ro Counter64 .1.3.6.1.2.1.220.1.6.1.9 |
lispMapCacheEidEncapPacketsThe number of LISP packets that were encapsulated by this device using the given EID-Prefix in the map-cache. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of cache being removed and replaced, which can be detected by observing the value of lispMapCacheEidTimeStamp.ro Counter64 .1.3.6.1.2.1.220.1.6.1.10 |
lispMapCacheLocatorTableThis table represents the set of locators per EID-Prefix contained in the map-cache table of an ITR. SEQUENCE OF LispMapCacheLocatorEntry .1.3.6.1.2.1.220.1.7 |
lispMapCacheLocatorEntryAn entry (conceptual row) in the lispMapCacheLocatorTable. LispMapCacheLocatorEntry .1.3.6.1.2.1.220.1.7.1 |
lispMapCacheLocatorRlocLengthThis object is used to get the octet-length of lispMapCacheLocatorRloc. Integer32 .1.3.6.1.2.1.220.1.7.1.1 |
lispMapCacheLocatorRlocThe locator for the EID-Prefix in the mapping cache. LispAddressType .1.3.6.1.2.1.220.1.7.1.2 |
lispMapCacheLocatorRlocPriorityThe unicast priority of the RLOC for this EID-Prefix (0-255); lower is more preferred.ro Integer32 .1.3.6.1.2.1.220.1.7.1.3 |
lispMapCacheLocatorRlocWeightThe unicast weight of the RLOC for this EID-Prefix (0 - 100) percentage.ro Integer32 .1.3.6.1.2.1.220.1.7.1.4 |
lispMapCacheLocatorRlocMPriorityThe multicast priority of the RLOC for this EID-Prefix (0-255); lower is more preferred.ro Integer32 .1.3.6.1.2.1.220.1.7.1.5 |
lispMapCacheLocatorRlocMWeightThe multicast weight of the RLOC for this EID-Prefix (0 - 100) percentage.ro Integer32 .1.3.6.1.2.1.220.1.7.1.6 |
lispMapCacheLocatorRlocStateThe state of this RLOC as per this device (1 = RLOC is up; 2 = RLOC is down; 3 = RLOC is unreachable).ro Enumeration .1.3.6.1.2.1.220.1.7.1.7 |
lispMapCacheLocatorRlocTimeStampThe value of sysUpTime at which the RLOC of EID-Prefix information represented by this entry was learned by this device. If this information was present at the most recent reinitialization of the local management subsystem, then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.2.1.220.1.7.1.8 |
lispMapCacheLocatorRlocLastPriorityChangeTime elapsed since the last change of the unicast priority of the RLOC for this EID-Prefix. Note that this is independent of lispMapCacheLocatorRlocTimeStamp.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.2.1.220.1.7.1.9 |
lispMapCacheLocatorRlocLastWeightChangeTime elapsed since the last change of the unicast weight of the RLOC for this EID-Prefix. Note that this is independent of lispMapCacheLocatorRlocTimeStamp.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.2.1.220.1.7.1.10 |
lispMapCacheLocatorRlocLastMPriorityChangeTime since the last change of the multicast priority of the RLOC for this EID-Prefix.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.2.1.220.1.7.1.11 |
lispMapCacheLocatorRlocLastMWeightChangeTime since the last change of the multicast weight of the RLOC for this EID-Prefix.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.2.1.220.1.7.1.12 |
lispMapCacheLocatorRlocLastStateChangeTime since the last change of the up/down state of the RLOC for this EID-Prefix.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.2.1.220.1.7.1.13 |
lispMapCacheLocatorRlocRttRound-trip time of RLOC probe and map-reply for this RLOC address for this prefix.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.2.1.220.1.7.1.14 |
lispMapCacheLocatorRlocDecapOctetsThe number of octets of LISP packets that were decapsulated by this device and were sourced from a remote host within this EID-Prefix and were encapsulated for this RLOC. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of RLOC of cache being removed and replaced, which can be detected by observing the value of lispMapCacheLocatorRlocTimeStamp.ro Counter64 .1.3.6.1.2.1.220.1.7.1.15 |
lispMapCacheLocatorRlocDecapPacketsThe number of LISP packets that were decapsulated by this device and were sourced from a remote host within this EID-Prefix and were encapsulated for this RLOC. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of RLOC of cache being removed and replaced, which can be detected by observing the value of lispMapCacheLocatorRlocTimeStamp.ro Counter64 .1.3.6.1.2.1.220.1.7.1.16 |
lispMapCacheLocatorRlocEncapOctetsThe number of octets of LISP packets that matched this EID-Prefix and were encapsulated using this RLOC address. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of RLOC of cache being removed and replaced, which can be detected by observing the value of lispMapCacheLocatorRlocTimeStamp.ro Counter64 .1.3.6.1.2.1.220.1.7.1.17 |
lispMapCacheLocatorRlocEncapPacketsThe number of LISP packets that matched this EID-Prefix and were encapsulated using this RLOC address. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of RLOC of cache being removed and replaced, which can be detected by observing the value of lispMapCacheLocatorRlocTimeStamp.ro Counter64 .1.3.6.1.2.1.220.1.7.1.18 |
lispConfiguredLocatorTableThis table represents the set of routing locators configured on this device. Note that the addresses configured by Proxy-ITR are treated as routing locators and therefore can be part of this table. SEQUENCE OF LispConfiguredLocatorEntry .1.3.6.1.2.1.220.1.8 |
lispConfiguredLocatorEntryAn entry (conceptual row) in the lispConfiguredLocatorTable. LispConfiguredLocatorEntry .1.3.6.1.2.1.220.1.8.1 |
lispConfiguredLocatorRlocLengthThis object is used to get the octet-length of lispConfiguredLocatorRloc. Integer32 .1.3.6.1.2.1.220.1.8.1.1 |
lispConfiguredLocatorRlocThis object is an RLOC address configured on this device. It can be an RLOC that is local to this device or can be an RLOC that belongs to another ETR within the same site. Proxy-ITR address is treated as an RLOC. LispAddressType .1.3.6.1.2.1.220.1.8.1.2 |
lispConfiguredLocatorRlocStateThe state of this RLOC as per this device. (1 = RLOC is up; 2 = RLOC is down; 3 = RLOC is unreachable).ro Enumeration .1.3.6.1.2.1.220.1.8.1.3 |
lispConfiguredLocatorRlocLocalIndicates whether the RLOC is local to this device (or remote, meaning local to another device in the same LISP site). (1 = RLOC is an address on this device; 2 = RLOC is an address on another device).ro Enumeration .1.3.6.1.2.1.220.1.8.1.4 |
lispConfiguredLocatorRlocTimeStampThe value of sysUpTime at which the RLOC was configured on this device. If this information was present at the most recent reinitialization of the local management subsystem, then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.2.1.220.1.8.1.5 |
lispConfiguredLocatorRlocDecapOctetsThe number of octets of LISP packets that were addressed to this RLOC and were decapsulated. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of configured RLOC being removed and replaced, which can be detected by observing the value of lispConfiguredLocatorRlocTimeStamp.ro Counter64 .1.3.6.1.2.1.220.1.8.1.6 |
lispConfiguredLocatorRlocDecapPacketsThe number of LISP packets that were addressed to this RLOC and were decapsulated. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of configured RLOC being removed and replaced, which can be detected by observing the value of lispConfiguredLocatorRlocTimeStamp.ro Counter64 .1.3.6.1.2.1.220.1.8.1.7 |
lispConfiguredLocatorRlocEncapOctetsThe number of octets of LISP packets that were encapsulated by this device using this RLOC address as the source. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of configured RLOC being removed and replaced, which can be detected by observing the value of lispConfiguredLocatorRlocTimeStamp.ro Counter64 .1.3.6.1.2.1.220.1.8.1.8 |
lispConfiguredLocatorRlocEncapPacketsThe number of LISP packets that were encapsulated by this device using this RLOC address as the source. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of configured RLOC being removed and replaced, which can be detected by observing the value of lispConfiguredLocatorRlocTimeStamp.ro Counter64 .1.3.6.1.2.1.220.1.8.1.9 |
lispEidRegistrationTableThis table provides the properties of each LISP EID-Prefix that is registered with this device when configured to be a Map-Server. SEQUENCE OF LispEidRegistrationEntry .1.3.6.1.2.1.220.1.9 |
lispEidRegistrationEntryAn entry (conceptual row) in the lispEidRegistrationTable. LispEidRegistrationEntry .1.3.6.1.2.1.220.1.9.1 |
lispEidRegistrationEidLengthThis object is used to get the octet-length of lispEidRegistrationEid. Integer32 .1.3.6.1.2.1.220.1.9.1.1 |
lispEidRegistrationEidThe EID-Prefix that is being registered. LispAddressType .1.3.6.1.2.1.220.1.9.1.2 |
lispEidRegistrationSiteNameSite name used by a Map-Server to distinguish different LISP sites that are registering with it.ro OCTET STRING .1.3.6.1.2.1.220.1.9.1.3 |
lispEidRegistrationSiteDescriptionDescription for a site name used by a Map-Server. The EID prefix that is being registered belongs to this site.ro OCTET STRING .1.3.6.1.2.1.220.1.9.1.4 |
lispEidRegistrationIsRegisteredIndicates the registration status of the given EID-Prefix. If this object is true, then it means the EID-Prefix is registered. The value false implies the EID-Prefix is not registered with the Map Server. There are multiple scenarios when this could happen like authentication failures, routing problems, misconfigs to name a few.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.220.1.9.1.5 |
lispEidRegistrationFirstTimeStampThe value of sysUpTime at which the first valid register message for the EID Prefix information represented by this entry was received by this device. If this information was present at the most recent reinitialization of the local management subsystem, then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.2.1.220.1.9.1.6 |
lispEidRegistrationLastTimeStampThe value of sysUpTime at which the last valid register message for the EID Prefix information represented by this entry was received by this device. If this information was present at the most recent reinitialization of the local management subsystem, then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.2.1.220.1.9.1.7 |
lispEidRegistrationLastRegisterSenderLengthThis object is used to get the octet-length of lispEidRegistrationLastRegisterSender, the next object.ro Integer32 .1.3.6.1.2.1.220.1.9.1.8 |
lispEidRegistrationLastRegisterSenderSource address of the last valid register message for the given EID-Prefix that was received by this device.ro LispAddressType .1.3.6.1.2.1.220.1.9.1.9 |
lispEidRegistrationAuthenticationErrorsCount of total authentication errors of map-registers received for the given EID-Prefix. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of site config changes, which can be detected by observing the value of lispEidRegistrationFirstTimeStamp.ro Counter64 .1.3.6.1.2.1.220.1.9.1.10 |
lispEidRegistrationRlocsMismatchCount of total map-registers received that had at least one RLOC that was not in the allowed list of RLOCs for the given EID-Prefix. Discontinuities in this monotonically increasing value occur at reinitialization of the management system. Discontinuities can also occur as a result of site config changes, which can be detected by observing the value of lispEidRegistrationFirstTimeStamp.ro Counter64 .1.3.6.1.2.1.220.1.9.1.11 |
lispEidRegistrationEtrTableThis table provides the properties of ETRs that register the given EID-Prefix with this device when configured to be a Map-Server. SEQUENCE OF LispEidRegistrationEtrEntry .1.3.6.1.2.1.220.1.10 |
lispEidRegistrationEtrEntryAn entry (conceptual row) in the lispEidRegistrationEtrTable. LispEidRegistrationEtrEntry .1.3.6.1.2.1.220.1.10.1 |
lispEidRegistrationEtrSenderLengthThis object is used to get the octet-length of lispEidRegistrationEtrSender. Integer32 .1.3.6.1.2.1.220.1.10.1.1 |
lispEidRegistrationEtrSenderSource address of the ETR that is sending valid register messages for this EID-Prefix to this device. LispAddressType .1.3.6.1.2.1.220.1.10.1.2 |
lispEidRegistrationEtrLastTimeStampThe value of sysUpTime at which the last valid register message from this ETR for the EID Prefix information represented by this entry was received by this device. If this information was present at the most recent reinitialization of the local management subsystem, then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.2.1.220.1.10.1.3 |
lispEidRegistrationEtrTtlThe Record TTL of the registering ETR device for this EID-Prefix.ro Unsigned32 .1.3.6.1.2.1.220.1.10.1.4 |
lispEidRegistrationEtrProxyReplyIndicates proxy-replying status of the registering ETR for this EID-Prefix. If this object is true, then it means the Map-Server can proxy-reply.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.220.1.10.1.5 |
lispEidRegistrationEtrWantsMapNotifyIndicates whether the EID-Prefix wants Map-Notifications. If this object is true, then it means the EID-Prefix wants Map-Notifications.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.220.1.10.1.6 |
lispEidRegistrationLocatorTableThis table provides the properties of all locators per LISP site that are served by this device when configured to be a Map-Server. SEQUENCE OF LispEidRegistrationLocatorEntry .1.3.6.1.2.1.220.1.11 |
lispEidRegistrationLocatorEntryAn entry (conceptual row) in the lispEidRegistrationLocatorTable. LispEidRegistrationLocatorEntry .1.3.6.1.2.1.220.1.11.1 |
lispEidRegistrationLocatorRlocLengthThis object is used to get the octet-length of lispEidRegistrationLocatorRloc. Integer32 .1.3.6.1.2.1.220.1.11.1.1 |
lispEidRegistrationLocatorRlocThe locator of the given EID-Prefix being registered by the given ETR with this device. LispAddressType .1.3.6.1.2.1.220.1.11.1.2 |
lispEidRegistrationLocatorRlocStateThe cached state of this RLOC received in map-register from the ETR by the device, in the capacity of a Map-Server. Value 1 refers to up, value 2 refers to down.ro Enumeration .1.3.6.1.2.1.220.1.11.1.3 |
lispEidRegistrationLocatorIsLocalIndicates if the given locator is local to the registering ETR. If this object is true, it means the locator is local.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.220.1.11.1.4 |
lispEidRegistrationLocatorPriorityThe unicast priority of the RLOC for this EID-Prefix in the register message sent by the given ETR.ro Integer32 .1.3.6.1.2.1.220.1.11.1.5 |
lispEidRegistrationLocatorWeightThe unicast weight of the RLOC for this EID-Prefix in the register message sent by the given ETR.ro Integer32 .1.3.6.1.2.1.220.1.11.1.6 |
lispEidRegistrationLocatorMPriorityThe multicast priority of the RLOC for this EID-Prefix in the register message sent by the given ETR.ro Integer32 .1.3.6.1.2.1.220.1.11.1.7 |
lispEidRegistrationLocatorMWeightThe multicast weight of the RLOC for this EID-Prefix in the register message sent by the given ETR.ro Integer32 .1.3.6.1.2.1.220.1.11.1.8 |
lispUseMapServerTableThis table provides the properties of the Map-Server(s) with which this device is configured to register. SEQUENCE OF LispUseMapServerEntry .1.3.6.1.2.1.220.1.12 |
lispUseMapServerEntryAn entry (conceptual row) in the lispUseMapServerTable. LispUseMapServerEntry .1.3.6.1.2.1.220.1.12.1 |
lispUseMapServerAddressLengthThis object is used to get the octet-length of lispUseMapServerAddress. Integer32 .1.3.6.1.2.1.220.1.12.1.1 |
lispUseMapServerAddressAddress of a Map-Server configured on this device. LispAddressType .1.3.6.1.2.1.220.1.12.1.2 |
lispUseMapServerStateState of this Map-Server configured on this device (1 = Map-Server is up; 2 = Map-Server is down).ro Enumeration .1.3.6.1.2.1.220.1.12.1.3 |
lispUseMapResolverTableThis table provides the properties of the Map-Resolver(s) this device is configured to use. SEQUENCE OF LispUseMapResolverEntry .1.3.6.1.2.1.220.1.13 |
lispUseMapResolverEntryAn entry (conceptual row) in the lispUseMapResolverTable. LispUseMapResolverEntry .1.3.6.1.2.1.220.1.13.1 |
lispUseMapResolverAddressLengthThis object is used to get the octet-length of lispUseMapResolverAddress. Integer32 .1.3.6.1.2.1.220.1.13.1.1 |
lispUseMapResolverAddressAddress of Map-Resolver configured on this device. LispAddressType .1.3.6.1.2.1.220.1.13.1.2 |
lispUseMapResolverStateState of this Map-Resolver configured on this device (1 = Map-Resolver is up; 2 = Map-Resolver is down).ro Enumeration .1.3.6.1.2.1.220.1.13.1.3 |
lispUseProxyEtrTableThis table provides the properties of all Proxy ETRs that this device is configured to use. SEQUENCE OF LispUseProxyEtrEntry .1.3.6.1.2.1.220.1.14 |
lispUseProxyEtrEntryAn entry (conceptual row) in the lispUseProxyEtrTable. LispUseProxyEtrEntry .1.3.6.1.2.1.220.1.14.1 |
lispUseProxyEtrAddressLengthThis object is used to get the octet-length of lispUseProxyEtrAddress. Integer32 .1.3.6.1.2.1.220.1.14.1.1 |
lispUseProxyEtrAddressAddress of Proxy ETR configured on this device. LispAddressType .1.3.6.1.2.1.220.1.14.1.2 |
lispUseProxyEtrPriorityThe unicast priority of the PETR locator.ro Integer32 .1.3.6.1.2.1.220.1.14.1.3 |
lispUseProxyEtrWeightThe unicast weight of the PETR locator.ro Integer32 .1.3.6.1.2.1.220.1.14.1.4 |
lispUseProxyEtrMPriorityThe multicast priority of the PETR locator.ro Integer32 .1.3.6.1.2.1.220.1.14.1.5 |
lispUseProxyEtrMWeightThe multicast weight of the PETR locator.ro Integer32 .1.3.6.1.2.1.220.1.14.1.6 |
lispUseProxyEtrStateState of this Proxy ETR configured on this device (0 = Proxy ETR is down; 1 = Proxy ETR is up).ro Enumeration .1.3.6.1.2.1.220.1.14.1.7 |
lispConformance OBJECT IDENTIFIER .1.3.6.1.2.1.220.2 |
lispCompliances OBJECT IDENTIFIER .1.3.6.1.2.1.220.2.1 |
lispMIBComplianceEtrThe compliance statement for LISP ETRs. It conveys whether the device supports the ETR feature, and, if so, the relevant state associated with that feature. Unknown .1.3.6.1.2.1.220.2.1.1 |
lispMIBComplianceItrThe compliance statement for LISP ITRs. It conveys whether the device supports the ITR feature, and, if so, the relevant state associated with that feature. Unknown .1.3.6.1.2.1.220.2.1.2 |
lispMIBCompliancePetrThe compliance statement for LISP Proxy-ETRs. It conveys whether the device supports the Proxy-ETR feature, and, if so, the relevant state associated with that feature. Unknown .1.3.6.1.2.1.220.2.1.3 |
lispMIBCompliancePitrThe compliance statement for LISP Proxy-ITRs. It conveys whether the device supports the Proxy-ITR feature, and, if so, the relevant state associated with that feature. Unknown .1.3.6.1.2.1.220.2.1.4 |
lispMIBComplianceMapServerThe compliance statement for LISP Map Servers. It conveys whether the device supports the Map Server feature, and, if so, the relevant state associated with that feature. Unknown .1.3.6.1.2.1.220.2.1.5 |
lispMIBComplianceMapResolverThe compliance statement for LISP Map Resolvers. It conveys whether the device supports the Map Resolver feature, and, if so, the relevant state associated with that feature. Unknown .1.3.6.1.2.1.220.2.1.6 |
lispGroups OBJECT IDENTIFIER .1.3.6.1.2.1.220.2.2 |
lispMIBEtrGroupA collection of objects to support reporting of basic LISP ETR parameters. Unknown .1.3.6.1.2.1.220.2.2.1 |
lispMIBItrGroupA collection of objects to support reporting of basic LISP ITR parameters. Unknown .1.3.6.1.2.1.220.2.2.2 |
lispMIBPetrGroupA collection of objects to support reporting of basic LISP Proxy-ETR parameters. Unknown .1.3.6.1.2.1.220.2.2.3 |
lispMIBPitrGroupA collection of objects to support reporting of basic LISP Proxy-ITR parameters. Unknown .1.3.6.1.2.1.220.2.2.4 |
lispMIBMapServerGroupA collection of objects to support reporting of basic LISP Map Server parameters. Unknown .1.3.6.1.2.1.220.2.2.5 |
lispMIBMapResolverGroupA collection of objects to support reporting of basic LISP Map Resolver parameters. Unknown .1.3.6.1.2.1.220.2.2.6 |
lispMIBEtrExtendedGroupA collection of objects to support reporting of LISP features and properties on ETRs. Unknown .1.3.6.1.2.1.220.2.2.7 |
lispMIBItrExtendedGroupA collection of objects to support reporting of LISP features and properties on ITRs. Unknown .1.3.6.1.2.1.220.2.2.8 |
lispMIBMapServerExtendedGroupA collection of objects to support the reporting of LISP features and properties on Map Servers related to EID registrations. Unknown .1.3.6.1.2.1.220.2.2.9 |
lispMIBTuningParametersGroupA collection of objects used to support the reporting of parameters used to control LISP behavior and to tune performance. Unknown .1.3.6.1.2.1.220.2.2.10 |
lispMIBEncapStatisticsGroupA collection of objects used to support the reporting of LISP encapsulation statistics for the device. Unknown .1.3.6.1.2.1.220.2.2.11 |
lispMIBDecapStatisticsGroupA collection of objects used to support the reporting of LISP decapsulation statistics for the device. Unknown .1.3.6.1.2.1.220.2.2.12 |
lispMIBDiagnosticsGroupA collection of objects used to support the reporting of additional diagnostics related to the LISP control-plane state of a LISP device. Unknown .1.3.6.1.2.1.220.2.2.13 |
lispMIBVrfGroupA collection of objects used to support reporting of VRF-related information on a LISP device. Unknown .1.3.6.1.2.1.220.2.2.14 |